It's the last DBB on this devclass.
TSM won't delete those as well.
Thomas Bleicher
Netzlink Informationstechnik GmbH
> -Ursprüngliche Nachricht-
> Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im
> Auftrag von Etienne Brodeur
> Gesendet: Donnerstag, 4. März 2004 17:13
> An: [EM
Hi,
I am having some weird problems with TSM, RMAN and TDP for Oracle.
Everything is on Windows 2000, above the 5.2 level, server and clients (2
Oracle servers running on 2 MSCS clusters) are at 5.2.2. We are using a
3584 with 6 3580-LTO2 drives connected on the SAN with a McData 4500 switch.
We
Based on my experience, it would appear you can only check the firmware of
the library with what is loaded with.
Reading the manual, multipath and single path library hardware wise
appears to be different. I am not sure hardware wise what to look for.
Other suggestion
2) Library path on
Thank you for the information.
I have gone through almost everything
you have listed, except for the firmware issue. I did check to see if it
was current, but not the issue of multi/single path. Can you tell me how
to check this ?
BTW, I failed to mention that this is
an FC/SAN attachment, not S
Your environment is very similar to what I recently configured, but I
didn't experience any problem you are having now.
I am just listing the steps I used and perhaps you might have made a typo
or something.
AIX 5.2, 3583-L72 library with 3 tape drives, SAN attached, TSM 5.2.2
Also 3583 can
I have spent hours and hours trying to get TSM server 5.2.2.0 on AIX 5.1
to define the PATH to the above tape library.
Every time I click on defining the PATH (/dev/smc0) to this library, TSM
goes off and spins for a while, eventually coming back with some kind of
error about being unable to commu
Personally, if you are really going to keep something forever...
to reduce the buildup in your TSM data base tracking all that stuff...
I'd back them up, export the node to tapes (to keep forever)
then let the data expire naturally...
you can always import the node later with relative dates
the
I'm having an issue where we've installed Open File Support on our clients.
The error message I receive is:
The snapshot cache location cannot be located on the same volume that is
being backed up.
In this particular case, this system is RAID 5 controlled with 3 partitions.
They are C, D, & E
You can certainly do it - in the copy pool for the management class domino data
is going to set the following:
verexist = nolimit
verdeleted = nolimit
retextra = nolimit
retonly = nolimit
However, don't forget these other two resultant settings:
size of library = not big enough
$$$ for new tapes
Hi All,
Is it possible to archive Domino database and mail forever using the TDP
module?
Thanks in advance.
/hector
This seems to be your last DB backup as far as TSM is concerned so it
won't allow you to delete it. How are you taking your DB backups to disk?
It doesn't seems to be recognized as a DB backup by TSM...
Etienne Brodeur
Geert De Pecker <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[
Doesn't work as TSM doesn' want to remove the last database backup from
the volume history:
tsm: SERVER1>del volh tod=today type=dbb
Do you wish to proceed? (Yes (Y)/No (N)) y
ANR2467I DELETE VOLHISTORY: 0 sequential volume history entries were
successfully deleted.
Schaub Joachim Paul ABX-SECE-ZH
del volh tod=today t=dbb ?
-Ursprungliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Auftrag von
Geert De Pecker
Gesendet: Donnerstag, 4. Marz 2004 16:22
An: [EMAIL PROTECTED]
Betreff: Last database backup tape
Hello,
We did quite some changes to our TSM setup, bu
Hello,
We did quite some changes to our TSM setup, but I'm left with a database
backup tape that I can't succeed in recovering. As we are now taking
backups of the database to disk, we don't need this tape anymore.
I can't find a way to delete the last tape. Is there a good soul that
can help me?
Installing TSM 5.2.2 server on a new AIX system (7028-6C4) - 4GB RAM.
Is there any real advantage/reason to installing the 64-bit version of the
TSM server ?
Opinions ? Thoughts ?
Didn't think to look in there. doh!!!
Many thanks
Andy Wilcox
UNIX Systems Administrator
Aquila Networks
-Original Message-
From: Schmitz Garnebode [mailto:[EMAIL PROTECTED]
Sent: 04 March 2004 14:30
To: [EMAIL PROTECTED]
Subject: Antwort: Re: Antwort: Re: 2 LTO-Drives Load-Balancing [Vi
Hi,
it's in
/usr/tivoli/tsm/server/webimages
TSM-Serverversion 5.1.6.5
Michael
I know this is only a minor thing but I sure am miffed as to where these
scripts come from.. I don't have them as defined scripts within TSM and
there are no sample scripts in the server directory... I have even trawled
through the media and cannot find them??? Any one have any ideas at what
versio
Hi Jim!
Probably because you haven't stopped and started the scheduler service after
adding the exclude statement?
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Jelf, Jim [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 04, 2004 14:43
To: [EMAIL PROTECTED
These files are part of the "System Object" part of the back up.
Regards,
Karel
-Oorspronkelijk bericht-
Van: Jelf, Jim [mailto:[EMAIL PROTECTED]
Verzonden: donderdag 4 maart 2004 14:43
Aan: [EMAIL PROTECTED]
Onderwerp: Include/Exclude issue
I have added exclude statements in my dsm.op
I have added exclude statements in my dsm.opt file to exclude the dat files
in my Windows2000 Profiles. The syntax of my exclude statement is:
EXCLUDE "d:\...\*.dat"
When I open the GUI on the client and look at the files under the backup
selection, it shows that the files are excluded from b
One simple reason for creating a copypool is that media goes bad.
>>> [EMAIL PROTECTED] 3/4/2004 12:12:03 AM >>>
The way we use it is to send the COPYPOOL off site, along with a copy
of the database, every business day. We use it for restoring in a
disaster
recovery situation.
Some people have a
Hi
If you have defined spacetrigger then the system will do this for you automatically.
If you do not have this then you will have to extend the db manually with the
following command:
extend db 2000
The above command will extend your database by 2Gb.
The Available Space is the Total Space ava
Hi
I do this on a UNIX/AIX server where the DRP server UNIX/AIX is at a higher TSM server
code than
the Production server UNIX/AIX.
All I do is restore the TSM database of the production server to the DRP server and
then
I run an upgrade DB on the DRP server.
The OS server levels are also at d
Ralph,
There are options to create new database files as needed, but what you need
to do right now is extend your database into the unused area that is already
created.
The command is
extend db
In your case, I would extend it to the 2964 and look into creating some more
database files manually
>I want to move to a newer TSM version but also going to a new machine.
>Is it possible to have the new machine with the new TSM installed and then
>use that to restore a database backup from an earlier TSM version?
>If yes, will it do the upgradedb automatically or do I have to run that
>manually?
Hi Ralph!
Checkout the extend db command. In your case you should issue:
extend db 2964
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Levi, Ralph [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 04, 2004 13:25
To: [EMAIL PROTECTED]
Subject: TSM DB extensi
My TSM DB is 97% full but appears to have more space to expand. Does it
do it automatically or must I take some action. Here are the stats from
q DB f=d command. I am confused about assigned capacity vs. available
capacity. Can someone please help.
Available Space (MB): 25,000
Assigned
>also if i have media in library and they are full should they go into
>COPYPOOL or they in libpool are always in libpool and they in copypool are
>always in copypool ?
>And i should always rotate some media in both pools ?
>Or how can i do this "backup ltopool copypool" and "backup diskpool
>copyp
Hi
If you are sure the data on those volumes has no value anymore, you can
delete them with :
Delete volume discard=yes
This will remove any reference from the files originally written on
those volumes from TSM DB. Note that existing copies from the files in
the copy storage pools will also
>I have 20 old cartridges and all are having data.
>Now can i delete or erase the data from all these tapes
>and reuse it again for new backups.
You didn't specify what those tapes are...whether foreign or
in a stgpool. If in a stgpool, they will be implicitly reused
when their contents expire or
Hi again
Thanks for your help. I tried the two scripts, after little manupilation.
They simply do the same than we did: Calculating the transferrate out of
the time and the amount of the transmitted bytes.
The srcipts can be found at the server-directory in the file scripts.smp
My output:
---
Andy Wilcox wrote
>>I think you need to give a little more info as the two scripts sound like
>>local scripts to yourselves. You will need to give the content of your
>>scripts to be useful...
No these are not local scripts, Just run them and see what you get
***
Miles,
I think you need to give a little more info as the two scripts sound like
local scripts to yourselves. You will need to give the content of your
scripts to be useful...
eg:
query script q_proc_stats f=d
query script q_ses_stats f=d
... and look at what follows "Command:"
Many thanks
An
Hi
Is there anyone using LTO2 drives with LTO1 tapes?
How does the transferrate changes?
What i know is:
LTO2 drives with LTO2 tapes provides 30MB/s maximum and 15MB/s minimum.
LTO1 drives with LTO1 tapes provides 15MB/s maximum and 8MB/s minimum.
but how does
LTO2 drives with LTO1 tapes work??
I
Hi all,
I have 20 old cartridges and all are having data.
Now can i delete or erase the data from all these tapes
and reuse it again for new backups.
waiting for your replies
Thanks
Geetha Thanu
-
Hello,
I want to move to a newer TSM version but also going to a new machine.
Is it possible to have the new machine with the new TSM installed and then
use that to restore a database backup from an earlier TSM version?
If yes, will it do the upgradedb automatically or do I have to run that
manual
uh, thansk four your response ...
also if i have media in library and they are full should they go into
COPYPOOL or they in libpool are always in libpool and they in copypool are
always in copypool ?
And i should always rotate some media in both pools ?
Or how can i do this "backup ltopool copypoo
38 matches
Mail list logo
