Hi,
Anybody can help me on this??
The TSM log hit the PCT then it was trigger db backup but after backup it
was not reduce the log. So ended up the tsm will hang due to hit 100%
Please help It happenedlmost every Monday
.
Thanks.
tsm: CBJ0008_TSM>q actlog begint=00:00
Hi,
Do we have to define include.subfile and include statements seperately
for the same file? If no, can we define include.subfile with a management
class at the end of include.subfile statement.
Best Regards,
Burak
PS: Is this definition correct to backup c:\text.txt while using subfile?
Hello, Lars.
Actually, I've done some pretty extensive testing on this issue under the NT
"OS". Please see the post...
http://msgs.adsm.org/cgi-bin/get/adsm0109/463.html
This is a pretty comprehensive test I did to ascertain the fact that the TSM
backup client does _NOT_ change the access time
TSM support NDMP at this time.
--
Joshua S. Bassi
Sr. Solutions Architect
IBM Certified - AIX/HACMP, SAN, Shark
Tivoli Certified Consultant- ADSM/TSM
Cell (415) 215-0326
[EMAIL PROTECTED]
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of
Gates, Ger
Can Tivoli backup up a Network Appliance - Filer using (DAR) Direct Access
Restore? Veritas said they will have this in version 5.0 later this year.
Gerry
Does anyone know how to backup oracle exports piped by fifo (file in, file
out) I don't think it's supported I tried this: dsmc i < piped_file and
it said it backed up 300 meg but I don't know where it went on tsm and if
it backed up at all Any assistance would be greatly appreciated.
--J
I restored two files via TSM which restored at 0 bytes...When I looked at
the tsm database in "dsmc q backup" I noticed that they're both 300 meg,
when I tried to restore them the second time they then successfully
restored at: 300 megs, and I used the same exact syntax. Does anyone know
what may
Just list the volumes in the database backup command:
backup db type=full devc=yourdevclasshere vol=volser
To make this even easier, you can have a pool of volumes to use, in a comma
separated list:
backup db type=full devc=yourdevclasshere
vol=vol1,vol2,vol3,vol4,vol5,vol6,vol7
TSM will go al
In the backup db command, use the volumenames= parameter.
--
Joshua S. Bassi
Sr. Solutions Architect
IBM Certified - AIX/HACMP, SAN, Shark
Tivoli Certified Consultant- ADSM/TSM
Cell (415) 215-0326
[EMAIL PROTECTED]
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTE
I'm almost afraid to open this can of worms again, but for the purposes of
licensing TSM clients, it's my understanding that what is important is the
number and platform type of each node that is 'in use'. 'Q License' tells
you how many licenses you 'licensed' on the server (which is arbitrary
be
Reasons for seperate ADSM instances: All have to do with Database
limitations
1. Limits to Database buffer pool allocations. (we run at 600 Meg to 1
Gig per instance and no one is recommending they be increased. the
application cannot handle it well)
2. Limits to the recovery log size
I have just upgraded the drives in my 3494 from 3590B to 3590E drives. I
have some older 3590 J type cartridges that I would like to write my TSM
database backups to (don't want to waste 3590K tapes for backups that will
easily fit onto the lower density tapes). What is the best way to achieve
t
Eric,
in case Adolph's recommendation don't work, or cfgmgr gives you another
error then the problem is with your 2108 SAN Data Gateway (SDG). Go into
the SDG (SAN Data Gateway) firmware and execute the following actions:
1) disableCC
2) setHost 0, "aix" or setHost 0 AIX
3) setHost 1, "aix"
Sean, Since you will be using onbar, you will be doing full backups (onbar
Level Zero or whole_system) or Level One or Level Two backups. Look at an
onbar backup / restore guide... they are available for download from the
Informix web site...
The Level One & Two backups are roughly the same as doi
How does one display how many licenses TSM thinks it has. I need to purchase
more client licenses and I want to be sure I order the correct amount. I
can't for the life of me remember how to display the current licensing
statistics.
Al
Alan Davenport
Senior Storage Administr
Q LICENSE will tell you how many licenses of each type are in use and
licensed.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of
Alan Davenport
Sent: Tuesday, February 05, 2002 12:47 PM
To: [EMAIL PROTECTED]
Subject: Licenses
How does one display
Having two of anything is more complicated than having one of anything. If
you can do it, have only one. Why would you want/need two? TSM database
too large is probably the only reason I can think of. With two 25 GB
databases merged to one that is getting fairly large, but not unwieldy
especia
q license
-Original Message-
From: Alan Davenport [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 05, 2002 9:47 AM
To: [EMAIL PROTECTED]
Subject: Licenses
How does one display how many licenses TSM thinks it has. I need to purchase
more client licenses and I want to be sure I order t
Hi Adolph!
Thank you very much! I will install it tomorrow.
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Adolph Kahan [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 05, 2002 18:54
To: [EMAIL PROTECTED]
Subject: Re: 3494 through SAN Data Gateway
T
This is part of AIX. It will be on the AIX install CDs.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of
Loon, E.J. van - SPLXM
Sent: Tuesday, February 05, 2002 12:41 PM
To: [EMAIL PROTECTED]
Subject: 3494 through SAN Data Gateway
Hi *SM-ers!
I hav
Hi *SM-ers!
I have just connected a 3494 library through a SAN Data Gateway.
When I run cfgmgr is detects the drives:
rmt5 Available 10-68-01 IBM 3590 Tape Drive and Medium Changer (FCP)
rmt6 Available 10-68-01-4,0 IBM 3590 Tape Drive and Medium Changer (FCP)
But it also returns the follow
Hi,
I want to delete the invalid data inside the tapes of my storage pool. How
do i do it?
Is there a way to do it manually?
Thanks in advance,
Nazir
The manual is indeed incorrect. Use preview=yes.
David Longo
>>> [EMAIL PROTECTED] 02/05/02 11:03AM >>>
Original Post:
Zoltan
Forray/AC/VCUTo: [EMAIL PROTECTED]
Subject: Recovering a damaged
volume
Se
Liudyte,
To get the list of the copypool tapes, use preview=yes. When you are ready
to restore the volume use preview=NO.
Regards
Stuart
Infrastructure Services
Operations Bridge
Innogy
Swindon
* 01793 896060
Fax 01793 896065
* mailto:[EMAIL PROTECTED]
Pleas note the change of
Liudyte,
I think the right value for the preview option is simply "yes".
Try "restore volume 040287 preview=yes"
Good luck,
regards,
Michael
Liudyte Baker wrote:
>
> OK, guys and gals. Need some assistance, especially since I did RTFM and
> the book is in error.
>
> I have a damaged tape. I we
Original Post:
Zoltan
Forray/AC/VCUTo: [EMAIL PROTECTED]
Subject: Recovering a damaged
volume
Sent by:
"ADSM: Dist
Stor Manager"
<[EMAIL PROTECT
Two works or three ... general I have two per system. 4 processors each and
2-4 Gigs of RAM. 4.5 disk arrays each. 250-300 clients. Bottleneck on
designing around long transactions.
Jeff
> -Original Message-
> From: Justin Bleistein [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, February
Running two is possible and easy from what the book says I'm about to test
that on our test environment I'll let you know how we make out.
--Justin Richard Bleistein
Bruce Lowrie
cc:
Sent by: "ADSM: Subject:
Daniel.
I have HSM experiences from both mainframe (DFSMShsm) and AIX (Tivoli Space Manager).
On well handled data structures HSM is very good.
But one of the main reasons for my TSM archive routine is to clean
up the directory structure from a great number of files, not only
to store cheap.
A
All,
Presently running two AIX 4.3 TSM servers sharing a 3494 Library with 15
3590E drives (8 drives assign to one server and 7 to the other). Each server
has 150+ clients and about a 25 GB database. Our Unix shop would like to
move the servers to a single Sun Solaris box. My question is do I run
In the "inclexcl" file you can specify what management classes belong to
what file, or filesystems/directories if you want logs to be kept for a
certain time period and so forthAs far as setting them up typically if
you have different retention periods for different things each one of those
re
Thanks Del. You're a master. That's twice in a year you have been spot-on.
John
At 07:39 AM 2/5/02 -0500, Del Hoobler wrote:
> > Is it indeed true that there is no bitfile object, as the query inventory
> > indicates the size of this object id is 0.0? Or does TDP store the
>bitfile
> > object
Hi,
please help, we have serious problem restoring files in the following
situation:
TSM server 4.2.1.7 AIX
TSM client 4.2.1.20 on Windows NT4 sp5 & 6a (also tested with earlier TSM
version .15,16,17,18)
Problem description:
Some stranges problems occurs during file restore.
Even after checking
> Is it indeed true that there is no bitfile object, as the query inventory
> indicates the size of this object id is 0.0? Or does TDP store the
bitfile
> object in a container somewhere that I am not looking?
TDP for Domino backups are made up of two
TSM server objects. You found one of them.
Hi Sean
I'd use separate nodenames to be able to handle the different ages of the
data.
The problem if you should try to use different management classes for the
different backups, is that it is the same data you are backing up, so you
cannot use the mgmt class option in your opt-file.
Best Reg
Hi Lars
Seems you're doing a manual HSM routine?
Why don't use DiskXtender instead? DiskXtender doesn't change the last
accessed date/time, and migrates old files, based on your rules,
automatically to your storagepool(or storagepools, for example
disk>>optical>>tape).
The DiskXtender software
Daniel.
I agree the operating system changes the access date.
In the same time, I'm convinced you can take control of a file read to not update the
last accessed date or at least remember the date and put it back again after the read.
I guess the TSM developers have the knowledge to fix an arc
Hi
I need assistance in setting up a management class for a Informix
database on a AIX server.
We are currently running ADSM server Version 3.
The ADSM/API client installed on the server is version 3.1.20.7.
We are using the Onbar utility to backup the Informix database to ADSM.
The scheduled In
Drive element 500 is drive 0(the drive at the top of library)
---
Daniel Sparrman
Exist i Stockholm AB
Bergkällavägen 31D
192 79 SOLLENTUNA
Växel: 08 - 754 98 00
Mobil: 070 - 399 27 51
39 matches
Mail list logo
