I have an auth server with two cards,
ether0 and ether1; it's connected to
an fs server on ether1 and a public
network on ether0 - it has to get root
from the fs server:
root is from il -g 192.168.100.1 ether /net/ether1 192.168.100.2 255.255.255.0
in /cfg/$sys/cpurc, I have the following:
ip/ip
> now, I have one concern and one problem -
> the concern: only ether0 is bound into /net,
> ether1 doesn't show up in there.
you need to add it to /lib/namespace.$node.
you also need to do the bind by hand in cpurc.
- erik
also, I should add that I cannot ping outside of the
local network, on the card attached to the public
network, even if I specify IP. so... there's some
problem in the setup here, it seems.
On Wed, Jul 21, 2010 at 12:58 AM, Akshat Kumar
wrote:
> I have an auth server with two cards,
> ether0 and
I put a bind in /rc/bin/cpurc.local,
but why the need to also put one
in /lib/namespace.$sysname?
On Wed, Jul 21, 2010 at 5:38 AM, erik quanstrom wrote:
>> now, I have one concern and one problem -
>> the concern: only ether0 is bound into /net,
>> ether1 doesn't show up in there.
>
> you need to
oxen# cat /net/ndb
ip=192.168.100.2 ipmask=/120 ipgw=192.168.100.1
the IP for the public network isn't even
shown here...
I think the information in /net/ndb is
directly from
bootargs=il -g 192.168.100.1 ether /net/ether1 192.168.100.2 255.255.255.0
in plan9.ini
On Wed Jul 21 12:13:20 EDT 2010, aku...@mail.nanosouffle.net wrote:
> I put a bind in /rc/bin/cpurc.local,
> but why the need to also put one
> in /lib/namespace.$sysname?
because /lib/namespace is used by cpu to
construct a namespace from scratch.
cpu does not use the namespace of the
process gro
the following bootargs line:
bootargs=il -x /net.alt -g 192.168.100.1 ether /net.alt/ether0
192.168.100.2 255.255.255.0
gives the following startup error:
boot: bind #I: %r
: '/net/net.alt': does not exist
what's the proper way to bind the interface from which I get root,
into /net.alt?
the real problem I'm having is that in the process
of getting its root fs, the auth server associates
#I with #l; I would like for it to associate #I1 with
#l instead. If I switch ether0 and ether1 around,
it will associate #I with #l1, but in that case, I
would like #I1 to be associated with #l1..
I ended up doing:
bind -b '#l1' /net
bind -b '#I1' /net
so that the public network is
what's used by default... but
in plan9.ini, I have:
fs=192.168.100.1
auth=192.168.100.2
where 192.168.100.2 is the IP
of the CPU/Auth server on the
internal network, so whenever
anything (say, auth/factotum)
l
I'm quite sure I'm not doing anything right here, but:
cpu% aquarela -p -d allcmds
Aquarela 0.5 running
SMB_COM_NEGOTIATE request: tid 0x pid 0x125f uid 0x mid 0x8f07
received:
0x ff53 4d42 7200 0018 4520 4253.SMBr.E ..BS
0x0010 5253 5059 4c20 5f12 f
10 matches
Mail list logo
