[vdr] Prolem with TT s2-3600
Hello, i am lost with my TT Connect S2-3600. It used to work, but after a teporary switch to kernel 2.6.30 i can't get it up anymore. I am back on kernel 2.6.27.23 (SuSE) and the S2-Liplianin driver package. All modules built fine and are installed correctly. A FullFeatured card that is also there, works without problems. When i connect the USB box, it get the following error: usb 3-5: new high speed USB device using ehci_hcd and address 2 usb 3-5: configuration #1 chosen from 1 choice usb 3-5: New USB device found, idVendor=0b48, idProduct=3007 usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-5: Product: TT-USB2.0 usb 3-5: Manufacturer: TechnoTrend dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state. pctv452e_power_ctrl: 1 dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Technotrend TT Connect S2-3600) pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00. dvb-usb: MAC address: 88013657b0d0 pctv452e_frontend_attach Enter BUG: unable to handle kernel NULL pointer dereference at IP: [] __mutex_lock_slowpath+0x34/0xa2 PGD 132d59067 PUD 1365b8067 PMD 0 Oops: 0002 [1] SMP last sysfs file: /sys/devices/pci:00/:00:1d.7/usb3/3-5/bmAttributes CPU 0 Modules linked in: stb0899(N) dvb_usb_pctv452e(N+) dvb_usb(N) lirc_serial(N) lir c_dev(N) snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device tun hdshm(N) af_packet ipv6 cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq fuse loop dm_mod tda8083(N) stv0299(N) ves1x93(N) dvb_ttpci(N) dvb_core(N) saa7146_v v(N) videodev(N) v4l1_compat(N) v4l2_compat_ioctl32(N) saa7146(N) snd_hda_intel videobuf_dma_sg(N) videobuf_core(N) snd_pcm snd_timer ttpci_eeprom(N) snd_page_a lloc snd_hwdep i2c_i801 snd ohci1394 e1000e button soundcore i2c_core ieee1394 r tc_cmos pcspkr intel_agp rtc_core sr_mod rtc_lib cdrom sg uhci_hcd ehci_hcd sd_m od crc_t10dif usbcore edd ext3 mbcache jbd fan ide_pci_generic ide_core ata_gene ric ahci pata_jmicron libata scsi_mod dock thermal processor thermal_sys hwmon Supported: No Pid: 3994, comm: modprobe Tainted: G 2.6.27.23-0.1-default #1 RIP: 0010:[] [] __mutex_lock_slowpath+0x34/ 0xa2 RSP: 0018:880132ca9b90 EFLAGS: 00010246 RAX: RBX: a03d9708 RCX: 0002 RDX: RSI: 880132ca9c18 RDI: a03d970c RBP: a03d970c R08: 880132ca9ca7 R09: 0001 R10: R11: R12: 8801385fa740 R13: a03d9710 R14: a03d96d0 R15: FS: 7f7b741746f0() GS:80a40080() knlGS: CS: 0010 DS: ES: CR0: 8005003b CR2: CR3: 00013a16f000 CR4: 06e0 DR0: DR1: DR2: DR3: DR6: 0ff0 DR7: 0400 Process modprobe (pid: 3994, threadinfo 880132ca8000, task 8801385fa740) Stack: a03d9710 880132ca9cc8 a03d79f0 880132ca9ca7 a03d96d0 0002 880132ca9c18 a03d96d0 8049b33f a0190519 Call Trace: [] mutex_lock+0xa/0xb [] i2c_transfer+0x56/0xd1 [i2c_core] [] i2c_read+0x48/0x67 [stb0899] [] Read8Direct+0x4e/0x99 [stb0899] [] stb0899_attach+0x139/0x348 [stb0899] [] pctv452e_frontend_attach+0x5e/0x206 [dvb_usb_pctv452e] [] dvb_usb_adapter_frontend_init+0x33/0xf5 [dvb_usb] [] dvb_usb_device_init+0x4de/0x5c7 [dvb_usb] [] usb_probe_interface+0x1a8/0x1df [usbcore] [] really_probe+0xdd/0x1e5 [] __driver_attach+0x46/0x6d [] bus_for_each_dev+0x44/0x78 [] bus_add_driver+0xf4/0x224 [] driver_register+0x9c/0x103 [] usb_register_driver+0x7e/0xe0 [usbcore] [] pctv452e_usb_init+0x1b/0x5c [dvb_usb_pctv452e] [] _stext+0x41/0x110 [] sys_init_module+0xa0/0x1ba [] system_call_fastpath+0x16/0x1b [<7f7b73cfa76a>] 0x7f7b73cfa76a Code: 6f 04 53 48 89 fb 48 89 ef 4c 8d 6b 08 48 83 ec 20 65 4c 8b 24 25 00 00 00 00 e8 03 0d 00 00 48 8b 53 10 4c 89 2c 24 48 89 63 10 <48> 89 22 48 89 54 24 08 48 83 ca ff 4c 89 64 24 10 48 89 d0 87 RIP [] __mutex_lock_slowpath+0x34/0xa2 RSP CR2: ---[ end trace 2a7a22f5799b2d7c ]--- usb 3-5: USB disconnect, address 2 Any ideas? -- Falk Spitzberg Tel: +49 5242 901626 E-Mail: p...@spitzberg.de ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Prolem with TT s2-3600
ich kenn mich zwar nicht aus und darum poste ich es auch nicht auf der mailingliste, aber dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state. sagt mir, dass einmal Strom abschalten bei der TT helfen koennte ?! Thomas Falk Spitzberg wrote: > Hello, > > i am lost with my TT Connect S2-3600. It used to work, but after a > teporary switch to kernel 2.6.30 i can't get it up anymore. > > I am back on kernel 2.6.27.23 (SuSE) and the S2-Liplianin driver > package. All modules built fine and are installed correctly. A > FullFeatured card that is also there, works without problems. > > When i connect the USB box, it get the following error: > > usb 3-5: new high speed USB device using ehci_hcd and address 2 > usb 3-5: configuration #1 chosen from 1 choice > usb 3-5: New USB device found, idVendor=0b48, idProduct=3007 > usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 3-5: Product: TT-USB2.0 > usb 3-5: Manufacturer: TechnoTrend > dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state. > pctv452e_power_ctrl: 1 > dvb-usb: will pass the complete MPEG2 transport stream to the software > demuxer. > DVB: registering new adapter (Technotrend TT Connect S2-3600) > pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00. > dvb-usb: MAC address: 88013657b0d0 > pctv452e_frontend_attach Enter > BUG: unable to handle kernel NULL pointer dereference at > > IP: [] __mutex_lock_slowpath+0x34/0xa2 > PGD 132d59067 PUD 1365b8067 PMD 0 > Oops: 0002 [1] SMP > last sysfs > file: /sys/devices/pci:00/:00:1d.7/usb3/3-5/bmAttributes > CPU 0 > Modules linked in: stb0899(N) dvb_usb_pctv452e(N+) dvb_usb(N) > lirc_serial(N) lir > c_dev(N) snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device tun hdshm(N) > af_packet > ipv6 cpufreq_conservative cpufreq_userspace cpufreq_powersave > acpi_cpufreq fuse > loop dm_mod tda8083(N) stv0299(N) ves1x93(N) dvb_ttpci(N) dvb_core(N) > saa7146_v > v(N) videodev(N) v4l1_compat(N) v4l2_compat_ioctl32(N) saa7146(N) > snd_hda_intel > videobuf_dma_sg(N) videobuf_core(N) snd_pcm snd_timer ttpci_eeprom(N) > snd_page_a > lloc snd_hwdep i2c_i801 snd ohci1394 e1000e button soundcore i2c_core > ieee1394 r > tc_cmos pcspkr intel_agp rtc_core sr_mod rtc_lib cdrom sg uhci_hcd > ehci_hcd sd_m > od crc_t10dif usbcore edd ext3 mbcache jbd fan ide_pci_generic ide_core > ata_gene > ric ahci pata_jmicron libata scsi_mod dock thermal processor thermal_sys > hwmon > Supported: No > Pid: 3994, comm: modprobe Tainted: G 2.6.27.23-0.1-default #1 > RIP: 0010:[] [] > __mutex_lock_slowpath+0x34/ > 0xa2 > RSP: 0018:880132ca9b90 EFLAGS: 00010246 > RAX: RBX: a03d9708 RCX: 0002 > RDX: RSI: 880132ca9c18 RDI: a03d970c > RBP: a03d970c R08: 880132ca9ca7 R09: 0001 > R10: R11: R12: 8801385fa740 > R13: a03d9710 R14: a03d96d0 R15: > FS: 7f7b741746f0() GS:80a40080() > knlGS: > CS: 0010 DS: ES: CR0: 8005003b > CR2: CR3: 00013a16f000 CR4: 06e0 > DR0: DR1: DR2: > DR3: DR6: 0ff0 DR7: 0400 > Process modprobe (pid: 3994, threadinfo 880132ca8000, task > 8801385fa740) > Stack: a03d9710 880132ca9cc8 > a03d79f0 > 880132ca9ca7 a03d96d0 0002 880132ca9c18 > a03d96d0 8049b33f a0190519 > Call Trace: > [] mutex_lock+0xa/0xb > [] i2c_transfer+0x56/0xd1 [i2c_core] > [] i2c_read+0x48/0x67 [stb0899] > [] Read8Direct+0x4e/0x99 [stb0899] > [] stb0899_attach+0x139/0x348 [stb0899] > [] pctv452e_frontend_attach+0x5e/0x206 > [dvb_usb_pctv452e] > [] dvb_usb_adapter_frontend_init+0x33/0xf5 [dvb_usb] > [] dvb_usb_device_init+0x4de/0x5c7 [dvb_usb] > [] usb_probe_interface+0x1a8/0x1df [usbcore] > [] really_probe+0xdd/0x1e5 > [] __driver_attach+0x46/0x6d > [] bus_for_each_dev+0x44/0x78 > [] bus_add_driver+0xf4/0x224 > [] driver_register+0x9c/0x103 > [] usb_register_driver+0x7e/0xe0 [usbcore] > [] pctv452e_usb_init+0x1b/0x5c [dvb_usb_pctv452e] > [] _stext+0x41/0x110 > [] sys_init_module+0xa0/0x1ba > [] system_call_fastpath+0x16/0x1b > [<7f7b73cfa76a>] 0x7f7b73cfa76a > > Code: 6f 04 53 48 89 fb 48 89 ef 4c 8d 6b 08 48 83 ec 20 65 4c 8b 24 25 > 00 00 00 > 00 e8 03 0d 00 00 48 8b 53 10 4c 89 2c 24 48 89 63 10 <48> 89 22 48 89 > 54 24 08 > 48 83 ca ff 4c 89 64 24 10 48 89 d0 87 > RIP [] __mutex_lock_slowpath+0x34/0xa2 > RSP > CR2: > ---[ end trace 2a7a22f5799b2d7c ]--- > usb 3-5: USB disconnect, address 2 > > > Any ideas? > ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Prolem with TT s2-3600
Am Mittwoch, den 15.07.2009, 11:21 +0200 schrieb Thomas Netousek: > ich kenn mich zwar nicht aus und darum poste ich es auch nicht auf der > mailingliste, aber > > dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state. > > sagt mir, dass einmal Strom abschalten bei der TT helfen koennte ?! Glaub mir, das habe ich als erstes probiert. Der Fehler kommt immer, egal, ob die Box warm- oder kalt gestartet wurde. Aber trotzdem Danke für den Hinweis. > > Thomas > > > > Falk Spitzberg wrote: > > Hello, > > > > i am lost with my TT Connect S2-3600. It used to work, but after a > > teporary switch to kernel 2.6.30 i can't get it up anymore. > > > > I am back on kernel 2.6.27.23 (SuSE) and the S2-Liplianin driver > > package. All modules built fine and are installed correctly. A > > FullFeatured card that is also there, works without problems. > > > > When i connect the USB box, it get the following error: > > > > usb 3-5: new high speed USB device using ehci_hcd and address 2 > > usb 3-5: configuration #1 chosen from 1 choice > > usb 3-5: New USB device found, idVendor=0b48, idProduct=3007 > > usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > > usb 3-5: Product: TT-USB2.0 > > usb 3-5: Manufacturer: TechnoTrend > > dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state. > > pctv452e_power_ctrl: 1 > > dvb-usb: will pass the complete MPEG2 transport stream to the software > > demuxer. > > DVB: registering new adapter (Technotrend TT Connect S2-3600) > > pctv452e: I2C error -121; AA 02 A0 01 14 -> 55 02 A0 00 00. > > dvb-usb: MAC address: 88013657b0d0 > > pctv452e_frontend_attach Enter > > BUG: unable to handle kernel NULL pointer dereference at > > > > IP: [] __mutex_lock_slowpath+0x34/0xa2 > > PGD 132d59067 PUD 1365b8067 PMD 0 > > Oops: 0002 [1] SMP > > last sysfs > > file: /sys/devices/pci:00/:00:1d.7/usb3/3-5/bmAttributes > > CPU 0 > > Modules linked in: stb0899(N) dvb_usb_pctv452e(N+) dvb_usb(N) > > lirc_serial(N) lir > > c_dev(N) snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device tun hdshm(N) > > af_packet > > ipv6 cpufreq_conservative cpufreq_userspace cpufreq_powersave > > acpi_cpufreq fuse > > loop dm_mod tda8083(N) stv0299(N) ves1x93(N) dvb_ttpci(N) dvb_core(N) > > saa7146_v > > v(N) videodev(N) v4l1_compat(N) v4l2_compat_ioctl32(N) saa7146(N) > > snd_hda_intel > > videobuf_dma_sg(N) videobuf_core(N) snd_pcm snd_timer ttpci_eeprom(N) > > snd_page_a > > lloc snd_hwdep i2c_i801 snd ohci1394 e1000e button soundcore i2c_core > > ieee1394 r > > tc_cmos pcspkr intel_agp rtc_core sr_mod rtc_lib cdrom sg uhci_hcd > > ehci_hcd sd_m > > od crc_t10dif usbcore edd ext3 mbcache jbd fan ide_pci_generic ide_core > > ata_gene > > ric ahci pata_jmicron libata scsi_mod dock thermal processor thermal_sys > > hwmon > > Supported: No > > Pid: 3994, comm: modprobe Tainted: G 2.6.27.23-0.1-default #1 > > RIP: 0010:[] [] > > __mutex_lock_slowpath+0x34/ > > 0xa2 > > RSP: 0018:880132ca9b90 EFLAGS: 00010246 > > RAX: RBX: a03d9708 RCX: 0002 > > RDX: RSI: 880132ca9c18 RDI: a03d970c > > RBP: a03d970c R08: 880132ca9ca7 R09: 0001 > > R10: R11: R12: 8801385fa740 > > R13: a03d9710 R14: a03d96d0 R15: > > FS: 7f7b741746f0() GS:80a40080() > > knlGS: > > CS: 0010 DS: ES: CR0: 8005003b > > CR2: CR3: 00013a16f000 CR4: 06e0 > > DR0: DR1: DR2: > > DR3: DR6: 0ff0 DR7: 0400 > > Process modprobe (pid: 3994, threadinfo 880132ca8000, task > > 8801385fa740) > > Stack: a03d9710 880132ca9cc8 > > a03d79f0 > > 880132ca9ca7 a03d96d0 0002 880132ca9c18 > > a03d96d0 8049b33f a0190519 > > Call Trace: > > [] mutex_lock+0xa/0xb > > [] i2c_transfer+0x56/0xd1 [i2c_core] > > [] i2c_read+0x48/0x67 [stb0899] > > [] Read8Direct+0x4e/0x99 [stb0899] > > [] stb0899_attach+0x139/0x348 [stb0899] > > [] pctv452e_frontend_attach+0x5e/0x206 > > [dvb_usb_pctv452e] > > [] dvb_usb_adapter_frontend_init+0x33/0xf5 [dvb_usb] > > [] dvb_usb_device_init+0x4de/0x5c7 [dvb_usb] > > [] usb_probe_interface+0x1a8/0x1df [usbcore] > > [] really_probe+0xdd/0x1e5 > > [] __driver_attach+0x46/0x6d > > [] bus_for_each_dev+0x44/0x78 > > [] bus_add_driver+0xf4/0x224 > > [] driver_register+0x9c/0x103 > > [] usb_register_driver+0x7e/0xe0 [usbcore] > > [] pctv452e_usb_init+0x1b/0x5c [dvb_usb_pctv452e] > > [] _stext+0x41/0x110 > > [] sys_init_module+0xa0/0x1ba > > [] system_call_fastpath+0x16/0x1b > > [<7f7b73cfa76a>] 0x7f7b73cfa76a > > > > Code: 6f 04 53 48 89 fb 48 89 ef 4c 8d 6b 08 48 83 ec 20 65 4c 8b 24 25 > > 00 00 00 > > 00 e8 03 0d 00
Re: [vdr] Prolem with TT s2-3600
Thomas Netousek wrote: > ich kenn mich zwar nicht aus und darum poste ich es auch nicht auf der > mailingliste, aber > > dvb-usb: found a 'Technotrend TT Connect S2-3600' in warm state. > > sagt mir, dass einmal Strom abschalten bei der TT helfen koennte ?! > > Thomas > > > Hi Thomas, this is not quite correct. Turning the device off and back on will most likely not improve the situation. "warm state" means, that the device has its firmware inside the EEPROM and does not need to load it via Linux's hotplug mechanism. Regards. André ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] [OT] Boot time of Intel D945GSEJT (Johnstown)
Dear list, can a knowledgeable person please write how long the BIOS takes to do its stuff until the boot loader or the operating system boots. And just to have a random figure, how long does the operating system take to get to the login screen? I know it depends a lot on the hardware and software configuration, so please mention this to (storage, distribution, Linux kernel version). Thanks, Paul signature.asc Description: Dies ist ein digital signierter Nachrichtenteil ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
