Re: [Bug 236305] Re: Creating user with username 'admin' hoses admin group, sudo config

[Lucio M Nicolosi]

Running Jaunty 64 and it works. Tested for users that indeed exist.

-- 
L M Nicolosi, Eng.

-- 
Creating user with username 'admin' hoses admin group, sudo config
https://bugs.launchpad.net/bugs/236305
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 236305] Re: Creating user with username 'admin' hoses admin group, sudo config

[Lucio M Nicolosi]

Jamie Jackson wrote:
> Could someone swing by here
> (http://ubuntuforums.org/showpost.php?p=7164655&postcount=4) and help me
> fix my groups file? I accidentally walked into this bug, too, and just
> need help repairing the damage. I see a few fixes mentioned in the
> comments in this bug, but don't know what the smartest solution is.

Should start your system in safe mode (root) and nano edit /etc/group

Follows a segment of mine:

messagebus:x:117:
polkituser:x:118:
avahi:x:119:
haldaemon:x:120:
admin:x:121:lmario,lucio
lmario:x:1000:
sambashare:x:122:lmario,lucio
vboxusers:x:123:lucio,lmario
lucio:x:1002:lucio

below yours:

polkituser:x:118:
avahi:x:119:
haldaemon:x:120:
admin:x:1006:
jamie:x:1000:
sambashare:x:122:jamie
heidi:x:1001:


Notice there is a gap between 120 and 122 - I guess 121 used to be your 
admin. Just a guess.

If I were you, after backing up the file, I would remove all references 
to admin and include

admin:x:121:

and reboot and check if works.

Or better, wait for the experts opinions

Good luck,

Lucio


-- 
L M Nicolosi, Eng.
Lat.:  23°34'4.79"S - Long.: 46°39'59.53"W
Linux Regist. User #481505 - http://counter.li.org/
5E42 E02F E21D 171B EA82  1876 621D 17EB AEBA 4B50

-- 
Creating user with username 'admin' hoses admin group, sudo config
https://bugs.launchpad.net/bugs/236305
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 236305] Re: Creating user with username 'admin' hoses admin group, sudo config

[Lucio M Nicolosi]

Or better:

admin:x:121:jamie,[any more user w/ sup rights]

-- 
Creating user with username 'admin' hoses admin group, sudo config
https://bugs.launchpad.net/bugs/236305
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 236305] Re: Creating user with username 'admin' hoses admin group, sudo config

[Lucio M Nicolosi]

Martin Pitt wrote:
> I'll copy jaunty-proposed to karmic once it's built.
>
> ** Changed in: gnome-system-tools (Ubuntu)
>Status: Confirmed => Fix Committed
>
> ** Changed in: gnome-system-tools (Ubuntu)
>  Assignee: Jonathan Davies (jpds) => Martin Pitt (pitti)
>
>   
Congratulations Martin...

-- 
L M Nicolosi, Eng.
Lat.:  23°34'4.79"S - Long.: 46°39'59.53"W
Linux Regist. User #481505 - http://counter.li.org/
5E42 E02F E21D 171B EA82  1876 621D 17EB AEBA 4B50

-- 
Creating user with username 'admin' hoses admin group, sudo config
https://bugs.launchpad.net/bugs/236305
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561218] Re: thunderbird-bin crashed with SIGSEGV in NS_InvokeByIndex_P()

[Lucio M Nicolosi]

** Visibility changed to: Public

-- 
thunderbird-bin crashed with SIGSEGV in NS_InvokeByIndex_P()
https://bugs.launchpad.net/bugs/561218
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561585] Re: Blank cd/dvd not recognized [LUCID]

[Lucio M Nicolosi]

On the other hand:

Everything is working fine for me right now.

LG-DVD RW GH22NP20 ATA & blank CD & ATA Zip drive 100 Mb, all behave as
expected.

Release 10.04 Lucid AMD64 (stable), Kernel 6.6.32.22-generic, udev
151.12.

Tks Martin Pitt & Ubuntu Team.

-- 
Blank cd/dvd not recognized [LUCID] 
https://bugs.launchpad.net/bugs/561585
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561585] Re: Blank cd/dvd not recognized [LUCID]

[Lucio M Nicolosi]

@Vik

I'm not suggesting anything, I just stated that Lucid stable/udev 151.12
worked for my hardware, after reporting (high above) to the developers
(which I'm not) that this bug affected me. I think that after my
complaints, the developers deserve to know.

-- 
Blank cd/dvd not recognized [LUCID] 
https://bugs.launchpad.net/bugs/561585
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 260918] Re: needed: libv4l and associated application patches (or "gspca stopped working in 2.6.27")

[Lucio M Nicolosi]

@Alex

Camorama doesn't seem to be maintained anymore (last entry at the site:
October 9, 2007) and will not work with every Ubuntu release since, I
guess, Intrepid. After your last post, installed Camorama and tried to
run it again (Lucid AMD 64). Same stuff, doesn't work. I wonder why it
is still available on repositories.

terminal info for:

camorama -D:

VIDIOCGCAP
device name = CIF Single Chip 
device type = 1
can use mmap()
# of channels = 1
# of audio devices = 0
max width = 352
max height = 288
min width = 48
min height = 32

VIDIOCGWIN
x = 0
y = 0
width = 176
height = 144
chromakey = 0
flags = 0

VIDIOCGWIN
x = 0
y = 0
width = 176
height = 144
chromakey = 0
flags = 0

VIDIOCGPICT:
bright = 11822
hue = 0
colour = 0
contrast = 0
whiteness = 0
colour depth = 8

VIDIOCGMBUF
mb.size = 409600
mb.frames = 4
mb.offset = 102400

(camorama:11996): Gtk-WARNING **: GtkSpinButton: setting an adjustment with 
non-zero page size is deprecated
update_tooltip called
tip - acap off
** Message: SET PIC
update_tooltip called
tip - acap off
Unable to capture image (VIDIOCSYNC)

-- 
needed: libv4l and associated application patches (or "gspca stopped working in 
2.6.27")
https://bugs.launchpad.net/bugs/260918
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 441396] Re: Totem hangs while loading a video with .srt (or .txt in MicroDVD format) sub from nautilus

[Lucio M Nicolosi]

Martin Pitt wrote:
> Accepted gst-plugins-base0.10 into karmic-proposed, the package will
> build now and be available in a few hours.
>
> ** Tags added: verification-needed
Tested new package on Karmic 64. It now can open .avi files  with 
corresponding .srt legend files. Problem seems solved.

-- 
L M Nicolosi, Eng.

-- 
Totem hangs while loading a video with .srt (or .txt in MicroDVD format) sub 
from nautilus
https://bugs.launchpad.net/bugs/441396
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497636] [NEW] Crash while synching - sub-folders show on Web but empty.

[Lucio M Nicolosi]

Public bug reported:

Binary package hint: ubuntuone-client

Description:Ubuntu 9.10 
Release:9.10 AMD 64

ubuntuone-client:
  Installed: 1.0.2-0ubuntu2
  Candidate: 1.0.2-0ubuntu2
  Version table:
 *** 1.0.2-0ubuntu2 0
500 http://archive.ubuntu.com karmic-updates/main Packages
100 /var/lib/dpkg/status
 1.0.2-0ubuntu1 0
500 http://archive.ubuntu.com karmic/main Packages

Cut/Pasted directory tree to $~/Ubuntu One (Nautilus)
Directory tree was synched.
files under first directory level were synched
Sub-folders appear on Files (Web) but empty.
Quited client, ran client again, client crashed repeatedly

Can manually add each file to sub-folder (Web)

ProblemType: Bug
.home.lmario..config.ubuntuone.ubuntuone.client.conf:
 [ubuntuone]
 bookmarked = True
 connected = False
 connect = 0
 show_applet = 1
Architecture: amd64
Date: Thu Dec 17 02:27:52 2009
DistroRelease: Ubuntu 9.10
NonfreeKernelModules: nvidia
Package: ubuntuone-client 1.0.2-0ubuntu2
PackageArchitecture: all
ProcEnviron:
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-17.54-generic
SourcePackage: ubuntuone-client
Uname: Linux 2.6.31-17-generic x86_64

** Affects: ubuntuone-client (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug

-- 
Crash while synching - sub-folders show on Web but empty.
https://bugs.launchpad.net/bugs/497636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497636] Re: Crash while synching - sub-folders show on Web but empty.

[Lucio M Nicolosi]

** Attachment added: ".home.lmario..cache.ubuntuone.log.oauth.login.log.txt"
   
http://launchpadlibrarian.net/36893430/.home.lmario..cache.ubuntuone.log.oauth.login.log.txt

** Attachment added: 
".home.lmario..cache.ubuntuone.log.syncdaemon.exceptions.log.txt"
   
http://launchpadlibrarian.net/36893431/.home.lmario..cache.ubuntuone.log.syncdaemon.exceptions.log.txt

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/36893432/Dependencies.txt

** Attachment added: "UbuntuoneClientPackages.txt"
   http://launchpadlibrarian.net/36893433/UbuntuoneClientPackages.txt

** Attachment added: "XsessionErrors.txt"
   http://launchpadlibrarian.net/36893434/XsessionErrors.txt

-- 
Crash while synching - sub-folders show on Web but empty.
https://bugs.launchpad.net/bugs/497636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 441396] Re: Totem hangs while loading a video with .srt (or .txt in MicroDVD format) sub from nautilus

[Lucio M Nicolosi]

Just updated last Totem and Gstreamer releases (nov/11) from Ubuntu
Proposed Repo (Karmic 64), although still didn't restart. The problem
persists. Totem freezes while opening .avi w/ corresponding .srt file.

-- 
L M Nicolosi, Eng.
Lat.:  23°34'4.79"S - Long.: 46°39'59.53"W

-- 
Totem hangs while loading a video with .srt (or .txt in MicroDVD format) sub 
from nautilus
https://bugs.launchpad.net/bugs/441396
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 441396] Re: Totem hangs while loading a video with .srt (or .txt in MicroDVD format) sub from nautilus

[Lucio M Nicolosi]

On Wed, Nov 11, 2009 at 7:41 PM, abujafar  wrote:
> No packages were released today, what the hell are you talking about?
> When a package that fixes this bug is released it will be reported here.

Some Totem and Gstreamer files WERE released today because every
single day I run aptitude update and safe-upgrade and today, Nov/11, a
new set of files were available and downloaded and installed. That's
what I'm talking about. Of course these were not the files I expected
to address the subject although you said a week ago that probably at
this time a new package would be released.

-- 
L M Nicolosi, Eng.
Lat.:  23°34'4.79"S - Long.: 46°39'59.53"W
Linux Regist. User #481505 - http://counter.li.org/
5E42 E02F E21D 171B EA82  1876 621D 17EB AEBA 4B50

-- 
Totem hangs while loading a video with .srt (or .txt in MicroDVD format) sub 
from nautilus
https://bugs.launchpad.net/bugs/441396
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 441396] Re: Totem hangs while loading a video with .srt (or .txt in MicroDVD format) sub from nautilus

[Lucio M Nicolosi]

On Wed, Nov 11, 2009 at 9:58 PM, damores  wrote:
>
> [] we will have to wait for the backport in upstream and then for the SRU 
> process to finish before we can load subtitles automatically in totem.
>

No need to hurry, this bug is just an inconvenience that can easily be
circumvented. However (and this is OT, sorry) I noticed in my system
(Jaunty & Karmic 64) that Totem is disturbed while playing downloaded
DVD files. Although the first half plays perfectly, the second messes
with the timer, and back and forth commands. Tested VLC with the same
files and it seems to work. Anyone could tell me if this is a bug (I
didn't find) or it's just my system? Thanks.

-- 
L M Nicolosi, Eng.
Lat.:  23°34'4.79"S - Long.: 46°39'59.53"W
Linux Regist. User #481505 - http://counter.li.org/
5E42 E02F E21D 171B EA82  1876 621D 17EB AEBA 4B50

-- 
Totem hangs while loading a video with .srt (or .txt in MicroDVD format) sub 
from nautilus
https://bugs.launchpad.net/bugs/441396
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561585] Re: Blank cd/dvd not recognized [LUCID]

[Lucio M Nicolosi]

Same stuff here w/ similar hw and sw.

-- 
Blank cd/dvd not recognized [LUCID] 
https://bugs.launchpad.net/bugs/561585
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561873] [NEW] language-pack-kde-br (breton) is incorrectly linked to kde-l10n-ptbr (portuguese brazil)

[Lucio M Nicolosi]

Public bug reported:

Binary package hint: language-pack-kde-br

Running Lucid Beta 64 observed that kde-l10n-ptbr (Brazil portuguese
-ptbr- localization for KDE) has language-pack-kde-br (Breton) as a
dependency. Obviously a wrong link. If I try to remove Breton language
support, I lose kde-l10n-ptbr.

** Affects: language-pack-kde-br (Ubuntu)
 Importance: Undecided
 Status: New

-- 
language-pack-kde-br (breton) is incorrectly linked to kde-l10n-ptbr 
(portuguese brazil)
https://bugs.launchpad.net/bugs/561873
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] Re: New Lucid install will not detect a second Sata HD

[Lucio M Nicolosi]

Any clue how to finish the process? Couldn't get this info:


"Almost finished ...

To finish authorizing the application identified as apport-collect to
access Launchpad on your behalf you should go back to the application
window in which you started the process and inform it that you have done
your part of the process."

Tried the above described process three times, either you will receive
three identical reports or something is very wrong, nothing new appears
in this bug log.

Reset the disks to present them as /sda (boot) and /sbd (data). Lucid
fresh install (zsync updated 24 hours ago) still cannot see my system
disk. It keeps offering the same disk as yesterday (now effectively
secondary) although the main disk is correctly assigned as /sda.

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] Re: New Lucid install will not detect a second Sata HD

[Lucio M Nicolosi]

Trying to explain better:
After running the apport-collect 556225 command the "run" screen is gone and it 
seems there's no place left to "inform it that you have done your part of the 
process" as Launchpad site states.

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] Re: New Lucid install will not detect a second Sata HD

[Lucio M Nicolosi]

apport information

** Tags added: apport-collected

** Description changed:

  Binary package hint: ubiquity
  
- Testing Lucid Beta Live CD AMD64 (Apr, 5 2010) as a fresh install on a
- system with Karmic and Jaunty and Grub2 already installed on /dev/sdb
- (originally /sda but after some disk fiddling remained at /sdb). /sda is
- a new disk. Both Nautilus and GParted on the Live CD recognize both
- disks and are able to mount existing partitions. Install 10.04 cannot
- detect previous Ubuntu versions or /sdb. Only offers repartitioning of
- /sda (and a Legacy useless 100 meg ATA Zip Drive) which is not what I
- want to do. I guess this leaves me with the Alternate CD. If I remember
- correctly this is not a new issue, I might have observed it in the past.
+ Testing Lucid Beta Live CD AMD64 (Apr, 5 2010) as a fresh install on a system 
with Karmic and Jaunty and Grub2 already installed on /dev/sdb (originally /sda 
but after some disk fiddling remained at /sdb). /sda is a new disk. Both 
Nautilus and GParted on the Live CD recognize both disks and are able to mount 
existing partitions. Install 10.04 cannot detect previous Ubuntu versions or 
/sdb. Only offers repartitioning of /sda (and a Legacy useless 100 meg ATA Zip 
Drive) which is not what I want to do. I guess this leaves me with the 
Alternate CD. If I remember correctly this is not a new issue, I might have 
observed it in the past.
+ --- 
+ Architecture: amd64
+ DistroRelease: Ubuntu 10.04
+ LiveMediaBuild: Ubuntu 10.04 "Lucid Lynx" - Beta amd64 (20100406)
+ Package: ubiquity 2.2.14
+ PackageArchitecture: amd64
+ ProcEnviron:
+  LANG=en_US.UTF-8
+  SHELL=/bin/bash
+ ProcVersionSignature: Ubuntu 2.6.32-19.28-generic 2.6.32.10+drm33.1
+ Tags: lucid
+ Uname: Linux 2.6.32-19-generic x86_64
+ UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare

** Attachment added: "Casper.gz"
   http://launchpadlibrarian.net/43315751/Casper.gz

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] Dependencies.txt

[Lucio M Nicolosi]

apport information

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/43315752/Dependencies.txt

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] UbiquityDebug.gz

[Lucio M Nicolosi]

apport information

** Attachment added: "UbiquityDebug.gz"
   http://launchpadlibrarian.net/43315753/UbiquityDebug.gz

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] UbiquityDm.gz

[Lucio M Nicolosi]

apport information

** Attachment added: "UbiquityDm.gz"
   http://launchpadlibrarian.net/43315767/UbiquityDm.gz

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] UbiquityPartman.gz

[Lucio M Nicolosi]

apport information

** Attachment added: "UbiquityPartman.gz"
   http://launchpadlibrarian.net/43315834/UbiquityPartman.gz

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] UbiquitySyslog.gz

[Lucio M Nicolosi]

apport information

** Attachment added: "UbiquitySyslog.gz"
   http://launchpadlibrarian.net/43315835/UbiquitySyslog.gz

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] Re: New Lucid install will not detect a second Sata HD

[Lucio M Nicolosi]

Got it, have to run on terminal... sorry for that...

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561585] Re: Blank cd/dvd not recognized [LUCID]

[Lucio M Nicolosi]

Please clarify if this is the way it should work in Lucid.

After waiting for a patched udev release I'm currently running udev
151-12 on Lucid amd64 beta2 up to date.

from my fstab, (same as Karmic):  /dev/sr0   /media/cdrom0   udf,iso9660
user,noauto,exec,utf8 0   0

Two devices connected to the IDE port:

dvd r/w: /dev/sr1
legacy zipdrive: /media/ntfs-1 (not listed in fstab)

When media is inserted at zipdrive no auto mounting occurs although
media can be seen at Places/Computer and root mounted from there.

from syslog:

Apr 19 09:20:31 lm-xfx kernel: [61326.651464] sd 0:0:1:0: [sda] Spinning up 
disk.
Apr 19 09:20:34 lm-xfx kernel: [61332.648035] sd 0:0:1:0: [sda] Spinning up 
disk..ready
Apr 19 09:20:34 lm-xfx kernel: [61335.674224] sd 0:0:1:0: [sda] READ 
CAPACITY(16) failed
Apr 19 09:20:34 lm-xfx kernel: [61335.674231] sd 0:0:1:0: [sda] Result: 
hostbyte=DID_ERROR driverbyte=DRIVER_OK
Apr 19 09:20:34 lm-xfx kernel: [61335.674239] sd 0:0:1:0: [sda] Sense not 
available.
Apr 19 09:20:34 lm-xfx kernel: [61335.675155] sd 0:0:1:0: [sda] 196576 512-byte 
logical blocks: (100 MB/95.9 MiB)
Apr 19 09:20:34 lm-xfx kernel: [61335.685737] sd 0:0:1:0: [sda] READ 
CAPACITY(16) failed
Apr 19 09:20:34 lm-xfx kernel: [61335.685746] sd 0:0:1:0: [sda] Result: 
hostbyte=DID_ERROR driverbyte=DRIVER_OK
Apr 19 09:20:34 lm-xfx kernel: [61335.685753] sd 0:0:1:0: [sda] Sense not 
available.
Apr 19 09:20:34 lm-xfx kernel: [61335.697501]  sda: unknown partition table


When a written CD is inserted, its icon becomes available at "Places". 
Different from Karmic, the icon has to be clicked to mount it. 

When a blank CD is inserted, the same happens, the icon becomes
available but as empty CD, it cannot be mounted, although (it seems) it
can be accessed by a CD burning application.

If I try to mount  a blank CD the following error is displayed:

Unable to mount cdrom0

mount: block device /dev/sr0 is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/sr0,
missing codepage or helper program, or other error
(could this be the IDE device where you in fact use
ide-scsi so that sr0 or sda or so is needed?)
In some cases useful info is found in syslog - try
dmesg | tail  or so

>From syslog (partial):

Apr 19 08:55:24 lm-xfx kernel: [59826.067516] cdrom: This disc doesn't have any 
tracks I recognize!
Apr 19 08:55:24 lm-xfx kernel: [59826.075988] sr 0:0:0:0: [sr0] Result: 
hostbyte=DID_OK driverbyte=DRIVER_SENSE
Apr 19 08:55:24 lm-xfx kernel: [59826.076000] sr 0:0:0:0: [sr0] Sense Key : 
Illegal Request [current] 
Apr 19 08:55:24 lm-xfx kernel: [59826.076010] sr 0:0:0:0: [sr0] Add. Sense: 
Illegal mode for this track
Apr 19 08:55:24 lm-xfx kernel: [59826.076025] sr 0:0:0:0: [sr0] CDB: Read(10): 
28 00 00 00 00 00 00 00 01 00
Apr 19 08:55:24 lm-xfx kernel: [59826.076041] end_request: I/O error, dev sr0, 
sector 0
Apr 19 08:55:24 lm-xfx kernel: [59826.076049] __ratelimit: 40 callbacks 
suppressed
Apr 19 08:55:24 lm-xfx kernel: [59826.076054] Buffer I/O error on device sr0, 
logical block 0
Apr 19 08:55:24 lm-xfx kernel: [59826.078225] sr 0:0:0:0: [sr0] Result: 
hostbyte=DID_OK driverbyte=DRIVER_SENSE
Apr 19 08:55:24 lm-xfx kernel: [59826.078232] sr 0:0:0:0: [sr0] Sense Key : 
Illegal Request [current] 
Apr 19 08:55:24 lm-xfx kernel: [59826.078238] sr 0:0:0:0: [sr0] Add. Sense: 
Illegal mode for this track
Apr 19 08:55:24 lm-xfx kernel: [59826.078248] sr 0:0:0:0: [sr0] CDB: Read(10): 
28 00 00 00 00 00 00 00 01 00
Apr 19 08:55:24 lm-xfx kernel: [59826.078261] end_request: I/O error, dev sr0, 
sector 0


-- 
Blank cd/dvd not recognized [LUCID] 
https://bugs.launchpad.net/bugs/561585
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561585] Re: Blank cd/dvd not recognized [LUCID]

[Lucio M Nicolosi]

In the previous posting instead of:

Two devices connected to the IDE port:
dvd r/w: /dev/sr1
   
please understand:

Two devices connected to the IDE port:
dvd r/w: /dev/sr0

-- 
Blank cd/dvd not recognized [LUCID] 
https://bugs.launchpad.net/bugs/561585
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561585] Re: Blank cd/dvd not recognized [LUCID]

[Lucio M Nicolosi]

Re: karmic

Checked the same hw configuration in Karmic:

zipdrive (no fstab entry) and cd, both auto mounts w/ proper user rights
as soon as media is inserted.

-- 
Blank cd/dvd not recognized [LUCID] 
https://bugs.launchpad.net/bugs/561585
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561585] Re: Blank cd/dvd not recognized [LUCID]

[Lucio M Nicolosi]

Martin,

All updates but nothing at all on the Lucid desktop, no CD, no Zip,
that's the problem.

Of course it can be worked out, but I'm beginning to miss Karmic :-).

-- 
Blank cd/dvd not recognized [LUCID] 
https://bugs.launchpad.net/bugs/561585
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] [NEW] New Lucid install will not detect a second Sata HD

[Lucio M Nicolosi]

Public bug reported:

Binary package hint: ubiquity

Testing Lucid Beta Live CD AMD64 (Apr, 5 2010) as a fresh install on a
system with Karmic and Jaunty and Grub2 already installed on /dev/sdb
(originally /sda but after some disk fiddling remained at /sdb). /sda is
a new disk. Both Nautilus and GParted on the Live CD recognize both
disks and are able to mount existing partitions. Install 10.04 cannot
detect previous Ubuntu versions or /sdb. Only offers repartitioning of
/sda (and a Legacy useless 100 meg ATA Zip Drive) which is not what I
want to do. I guess this leaves me with the Alternate CD. If I remember
correctly this is not a new issue, I might have observed it in the past.

** Affects: ubiquity (Ubuntu)
 Importance: Undecided
 Status: New

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 444162] Re: nm-connection-editor crashed with SIGSEGV in gtk_button_set_label()

[Lucio M Nicolosi]

** Attachment added: "CoreDump.gz"
   http://launchpadlibrarian.net/33090665/CoreDump.gz

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/33090666/Dependencies.txt

** Attachment added: "Disassembly.txt"
   http://launchpadlibrarian.net/33090667/Disassembly.txt

** Attachment added: "Gconf.txt"
   http://launchpadlibrarian.net/33090668/Gconf.txt

** Attachment added: "IpAddr.txt"
   http://launchpadlibrarian.net/33090669/IpAddr.txt

** Attachment added: "IwConfig.txt"
   http://launchpadlibrarian.net/33090670/IwConfig.txt

** Attachment added: "NetDevice.eth0.txt"
   http://launchpadlibrarian.net/33090671/NetDevice.eth0.txt

** Attachment added: "NetDevice.eth1.txt"
   http://launchpadlibrarian.net/33090672/NetDevice.eth1.txt

** Attachment added: "NetDevice.lo.txt"
   http://launchpadlibrarian.net/33090673/NetDevice.lo.txt

** Attachment added: "NetDevice.vboxnet0.txt"
   http://launchpadlibrarian.net/33090674/NetDevice.vboxnet0.txt

** Attachment added: "PciNetwork.txt"
   http://launchpadlibrarian.net/33090675/PciNetwork.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/33090676/ProcMaps.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/33090677/ProcStatus.txt

** Attachment added: "Registers.txt"
   http://launchpadlibrarian.net/33090678/Registers.txt

** Attachment added: "Stacktrace.txt"
   http://launchpadlibrarian.net/33090679/Stacktrace.txt

** Attachment added: "ThreadStacktrace.txt"
   http://launchpadlibrarian.net/33090680/ThreadStacktrace.txt

** Attachment added: "WifiSyslog.txt"
   http://launchpadlibrarian.net/33090681/WifiSyslog.txt

** Attachment added: "XsessionErrors.txt"
   http://launchpadlibrarian.net/33090682/XsessionErrors.txt

** Visibility changed to: Public

-- 
nm-connection-editor crashed with SIGSEGV in gtk_button_set_label()
https://bugs.launchpad.net/bugs/444162
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 444162] Re: nm-connection-editor crashed with SIGSEGV in gtk_button_set_label()

[Lucio M Nicolosi]

Update:

Last version corrects the bug: Crash trying to set NM to Static IP.

Updated from from Main Server (sept/06 - 17:00 GMT).

network-manager:
  Installed: 0.8~a~git.20091005t192303.1d28ad1-0ubuntu2
  Candidate: 0.8~a~git.20091005t192303.1d28ad1-0ubuntu2
  Version table:
 *** 0.8~a~git.20091005t192303.1d28ad1-0ubuntu2 0
500 http://archive.ubuntu.com karmic/main Packages
100 /var/lib/dpkg/status

Tks.


** Visibility changed to: Private

-- 
nm-connection-editor crashed with SIGSEGV in gtk_button_set_label()
https://bugs.launchpad.net/bugs/444162
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 461470] Re: HDD(s) incorrectly detected

[Lucio M Nicolosi]

Same thing here.
 - Running Jaunty and Karmic Beta both 64 completely OK.
 - Burned CD - K. RC, tested - OK
 - Gparted (from the Live CD) can "see" sda and all the partitions (Seagate 
Sata).
  Deleted Karmic Beta root partition (sda1 ext4) to install 
Karmic RC AMD64 updated on Oct/28.
  Created an empty ext4 sda1
 - Tried to install.
 - Instalation script (parted) can't "see" sda
 - Deleted sda1 with Gparted
 - Install still can't "see" sda
 - Put a ZIP drive at sdb (Pata)
 - Install (Parted) recognizes the Pata drive. (useless it is a 100 Meg ZIP) 
but not the Sata
 - Rebooted with PCI=NOMSI (A long time ago it worked) to no avail.

Only install script cannot recognize Sata sda - GParted on the same CD works 
perfectly.
... and Karmic is being released right... NOW!

-- 
HDD(s) incorrectly detected
https://bugs.launchpad.net/bugs/461470
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 461470] Re: HDD(s) incorrectly detected

[Lucio M Nicolosi]

For the record:

tested done with last http://cdimage.ubuntu.com/daily-live/current/

karmic-desktop-amd64.iso   27-Oct-2009 18:31  691M

-- 
HDD(s) incorrectly detected
https://bugs.launchpad.net/bugs/461470
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 448447] Re: Cannot change application icon on Karmic beta

[Lucio M Nicolosi]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/33431891/Dependencies.txt

** Attachment added: "GConfNonDefault.txt"
   http://launchpadlibrarian.net/33431892/GConfNonDefault.txt

** Attachment added: "XsessionErrors.txt"
   http://launchpadlibrarian.net/33431893/XsessionErrors.txt

-- 
Cannot change application icon on Karmic beta
https://bugs.launchpad.net/bugs/448447
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 448447] [NEW] Cannot change application icon on Karmic beta

[Lucio M Nicolosi]

Public bug reported:

Binary package hint: gnome-panel

Package gnome-panel 4011

Description:Ubuntu karmic (development branch)
Release:9.10

Updated till October 11 - 03:40 GMT from main server

For some reason "lost" Firefox standard icon. Right clicked application
icon, choose "Properties", clicked icon image. "Browse Icons" screen
opened but no icon archive could be found. On the "Browse" screen right
clicked to check "Show Hidden Files" but still no file could be seen,
either on or off. Browsed several directories, all "empty". Nautilus
showed all icon files at their expected places. Only they remained
invisible for gnome-panel.

ProblemType: Bug
Architecture: amd64
Date: Sun Oct 11 00:38:23 2009
DistroRelease: Ubuntu 9.10
NonfreeKernelModules: nvidia
Package: gnome-panel 1:2.28.0-0ubuntu4
ProcEnviron:
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-13.44-generic
SourcePackage: gnome-panel
Uname: Linux 2.6.31-13-generic x86_64

** Affects: gnome-panel (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug

-- 
Cannot change application icon on Karmic beta
https://bugs.launchpad.net/bugs/448447
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 448447] Re: Cannot change application icon on Karmic beta

[Lucio M Nicolosi]

On Mon, Oct 12, 2009 at 9:11 AM, Sebastien Bacher  wrote:
> Thank you for taking the time to report this bug and helping to make Ubuntu 
> better. Please answer these questions:
>
>  * Is this reproducible?

-- All the time

>  * If so, what specific steps should we take to recreate this bug?

-- As reported, change icon procedures

>  * Could you take a screenshot showing the issue?

-- Attached as Screenshot.png

>  This will help us to find and resolve the problem.
>
> ** Changed in: gnome-panel (Ubuntu)
>   Importance: Undecided => Low
>
> ** Changed in: gnome-panel (Ubuntu)
>       Status: New => Incomplete
>
> ** Changed in: gnome-panel (Ubuntu)
>     Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs)
>
> --
> Cannot change application icon on Karmic beta
> https://bugs.launchpad.net/bugs/448447
> You received this bug notification because you are a direct subscriber
> of the bug.
>

Thanks,

-- 
L M Nicolosi, Eng.
Lat.:  23°34'4.79"S - Long.: 46°39'59.53"W
Linux Regist. User #481505 - http://counter.li.org/
5E42 E02F E21D 171B EA82  1876 621D 17EB AEBA 4B50


** Attachment added: "Screenshot.png"
   http://launchpadlibrarian.net/33549944/Screenshot.png

-- 
Cannot change application icon on Karmic beta
https://bugs.launchpad.net/bugs/448447
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 448447] Re: Cannot change application icon on Karmic beta

[Lucio M Nicolosi]

On Mon, Oct 12, 2009 at 2:09 PM, Trevor Skaife  wrote:
> I have the same issue.
>

Plus 1, for God sake, seems I'm not delirious...

-- 
L M Nicolosi, Eng.
Lat.:  23°34'4.79"S - Long.: 46°39'59.53"W
Linux Regist. User #481505 - http://counter.li.org/
5E42 E02F E21D 171B EA82  1876 621D 17EB AEBA 4B50

-- 
Cannot change application icon on Karmic beta
https://bugs.launchpad.net/bugs/448447
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 448447] Re: Cannot change application icon on Karmic beta

[Lucio M Nicolosi]

On Mon, Oct 12, 2009 at 5:20 PM, Sebastien Bacher  wrote:
> could you describe exact steps to trigger the bug? is that the same
> issue than bug #116443?

I don't think so, the bug (at least on my machine - Gnome-64) is
clear, no files can be seen while clicking properties/icon exactly as
Trevor Skaife reported some hours ago and as shown at both
screenshots.

The referred (old) bug is:

"When you try to set up a custom icon for an application with
alacarte, it's not possible to use a picture that is not in the
default folder, it's possible to browse the different folders of the
system through the file picker but the pictures/files won't be
displayed."

I am not trying to set up a custom icon, I just tried the sequence
"Properties/Icon/Browse Icons" and no file can be seen. Not at the
default directory, not at anywhere else. Please, observe at my
screenshot that Nautilus show them all. Perhaps the "Show Hidden
Files" option at "Browser" is locked to "no".

The lost icon problem began while setting icons options (panel) for
Firefox and Shiretoko at 9.04 install (/home is shared). Later, on
9.10, observed that the link was broken because (of course) the
Shiretoko icon was not available. Trying to reset the icon to default
showed the problem, no file can be seen on any directory under
"Properties/Icon/Browse Icons" or "Properties/Icon/Browse
Icons/Browse". Returned to 9.04, went through the same sequence,
choose an icon also available at 9.10 and my FF Icon returned at
Katmic, but still cannot do it the same on 9.10, either on panel or
System/Preferences/Main Menu/Internet/Firefox/Properties, etc...

Of course this bug is not limited to Firefox, I do not have access to
any icon through this sequence.

-- 
L M Nicolosi, Eng.
Lat.:  23°34'4.79"S - Long.: 46°39'59.53"W
Linux Regist. User #481505 - http://counter.li.org/
5E42 E02F E21D 171B EA82  1876 621D 17EB AEBA 4B50

-- 
Cannot change application icon on Karmic beta
https://bugs.launchpad.net/bugs/448447
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 453716] Re: Totem freezes while opening .avi + .srt file

[Lucio M Nicolosi]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/33815805/Dependencies.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/33815806/ProcMaps.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/33815808/ProcStatus.txt

** Attachment added: "XsessionErrors.txt"
   http://launchpadlibrarian.net/33815809/XsessionErrors.txt

-- 
Totem freezes while opening .avi + .srt file
https://bugs.launchpad.net/bugs/453716
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 453716] [NEW] Totem freezes while opening .avi + .srt file

[Lucio M Nicolosi]

Public bug reported:

Description:Ubuntu karmic (development branch)
Release:9.10
Updated up to Oct 16 - 18:00 GMT - Main Server

totem:
  Installed: 2.28.1-0ubuntu4
  Candidate: 2.28.1-0ubuntu4
  Version table:
 *** 2.28.1-0ubuntu4 0
500 http://archive.ubuntu.com karmic/main Packages
100 /var/lib/dpkg/status

- At Nautilus, double clicked an .avi file that had a corresponding .srt 
sub-title file - Totem freezed
- Changed the name of the .srt file (unattached) - Totem works as expected
- Changed back the name of the .srt file (attached)
- Opened the same .avi file inside Totem - Totem/Movie/(recent file) - Totem 
works as expected, synched with the corresponding sub-title file.

ProblemType: Bug
Architecture: amd64
Date: Sat Oct 17 00:56:56 2009
DistroRelease: Ubuntu 9.10
ExecutablePath: /usr/bin/totem
NonfreeKernelModules: nvidia
Package: libgstreamer0.10-0 0.10.25-2
ProcEnviron:
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
SourcePackage: gstreamer0.10
Uname: Linux 2.6.31-14-generic x86_64

** Affects: gstreamer0.10 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug

-- 
Totem freezes while opening .avi + .srt file
https://bugs.launchpad.net/bugs/453716
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 450572] Re: system-config-samba.py crashed with AttributeError in __init__()

[Lucio M Nicolosi]

** Visibility changed to: Public

-- 
system-config-samba.py crashed with AttributeError in __init__()
https://bugs.launchpad.net/bugs/450572
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 448447] Re: Cannot change application icon on Karmic beta

[Lucio M Nicolosi]

Seems the last updates solved the issue. Please set this bug as Invalid.
Tks.

-- 
Cannot change application icon on Karmic beta
https://bugs.launchpad.net/bugs/448447
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 450572] Re: system-config-samba.py crashed with AttributeError in __init__()

[Lucio M Nicolosi]

Uninstalled and removed every file related to Samba, installed
everything again and the issue is gone. Please discard this bug as
Invalid.

-- 
system-config-samba.py crashed with AttributeError in __init__()
https://bugs.launchpad.net/bugs/450572
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 392836] Re: grub not adding correct uuid to grub.cfg

[Lucio M Nicolosi]

Problems here with double boot configuration. 
Running Jaunty perfectly (/root at secondary hd0,8). Installed Karmic Beta 
(sept/29) at primary partition (hd0,0). Could not boot after install. Still 
unable to find out why, (perhaps it did not like my grub[1] at [hd0,8]?). Reset 
Grub to previous conditions and Jaunty booted OK. Installed Grub2 in Jaunty, 
just in case. Menu.lst was set to default (Karmic) parameters (hd0,0) and 
corresponding (wrong) UUID. Of course the system didn't boot. Restored original 
menu.lst parameters from (good grace, there was a) backup and managed to make 
Jaunty work again. No way I can further test Karmic with double boot. I'm 
currently trying to reinstall original Grub.

-- 
grub not adding correct uuid to grub.cfg
https://bugs.launchpad.net/bugs/392836
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 497636] Re: Crash while synching - sub-folders show on Web but empty.

[Lucio M Nicolosi]

*** This bug is a duplicate of bug 368626 ***
https://bugs.launchpad.net/bugs/368626

Guillermo Gonzalez wrote:
> *** This bug is a duplicate of bug 368626 ***
> https://bugs.launchpad.net/bugs/368626
>
> looks like the problem is that there are utf-8 invalid filenames.
Checked files and indeed there was an utf-8 invalid filename. No issues 
here, bug
368626 addresses the problem.

-- 
Crash while synching - sub-folders show on Web but empty.
https://bugs.launchpad.net/bugs/497636
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 448447] Re: Cannot change application icon on Karmic beta

[Lucio M Nicolosi]

Confirmed, it works for a new user.

Roy Boerner wrote:
> Same problem here, blank icon browser. Tested with a fresh user profile
> and the problem does not occur.
>
>   

-- 
L M Nicolosi, Eng.
Lat.:  23°34'4.79"S - Long.: 46°39'59.53"W
Linux Regist. User #481505 - http://counter.li.org/
5E42 E02F E21D 171B EA82  1876 621D 17EB AEBA 4B50

-- 
Cannot change application icon on Karmic beta
https://bugs.launchpad.net/bugs/448447
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 757727] Re: Zeitgeist-daemon memory usage skyrockets after dash search

[Lucio M Nicolosi]

Running Oneiric 64 - K 3.0.0-17- Unity - zeitgeist 0.8.2-1 - Ubuntu One
sync with about 2.2 GB (not often changed) on an AMD Phenom X4 and 4 GB
memory. Zeitgeist-daemon easily skyrockets ocupying up to 2 GB (last
time I checked). Right at this moment System is on for the last two
hours, mostly in standby mode, pratically no processing, and it is
already using 400 MB. It didn't seem to happen a couple of weeks ago.
I'm can't figure what might have changed.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/757727

Title:
  Zeitgeist-daemon memory usage skyrockets after dash search

To manage notifications about this bug go to:
https://bugs.launchpad.net/zeitgeist-extensions/+bug/757727/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 757727] Re: Zeitgeist-daemon memory usage skyrockets after dash search

[Lucio M Nicolosi]

Installed zeitgeist 0.8.99~beta1-1~ppa1 from “Zeitgeist Framework Team”
team PPA and zeitgeist-daemon is back to normal (1,2 MB). Still
following the behaviour of zeitgeist-fts (now at 195MB).

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/757727

Title:
  Zeitgeist-daemon memory usage skyrockets after dash search

To manage notifications about this bug go to:
https://bugs.launchpad.net/zeitgeist-extensions/+bug/757727/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 92652] Re: Please add Microsoft compatible keyboard layout for Brazil

[Lucio M Nicolosi]

Update to Volanin's recipe at #18

How to fix this in Maverick in 2 steps:

*** 1. Edit the file: /usr/lib/gtk-2.0/2.10.0/gtk.immodules ***

2. Add your LOCALE to the end of the line beginning with "cedilla".
If you use Ubuntu in English, your locale is probably: en or en_US.
Add any LOCALE that you usually use as well.

Original line:
"cedilla" "Cedilla" "gtk20" "/usr/share/locale" "az:ca:co:fr:gv:oc:pt:sq:tr:wa"

Modified line:
"cedilla" "Cedilla" "gtk20" "/usr/share/locale" 
"az:ca:co:fr:gv:oc:pt:sq:tr:wa:en:en_US"

The effect is immediate.
You just need to restart your applications.

-- 
Please add Microsoft compatible keyboard layout for Brazil
https://bugs.launchpad.net/bugs/92652
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 697095] Re: polkit-gnome-authentication-agent-1 crashed with SIGSEGV in g_datalist_id_set_data_full() during login

[Lucio M Nicolosi]

Crash occured when trying enter Software Sources just after the first
boot with Ubuntu Desktop. Same thing with Ubuntu Unity after applying
the NVidia driver. Observed this crash with Natty 64 installed w/ the
alternate installer over an existing (Maverick copy) home directory.
However, a couple of days ago successfully installed the first Beta
version Natty 64 from the CD Live Installer over a blank /home and no
crash was observed on several reboots.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/697095

Title:
  polkit-gnome-authentication-agent-1 crashed with SIGSEGV in
  g_datalist_id_set_data_full() during login

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 697095] Re: polkit-gnome-authentication-agent-1 crashed with SIGSEGV in g_datalist_id_set_data_full() during login

[Lucio M Nicolosi]

#72 Follow up
Updated "Languages" adding pt-br, thus correcting "locales" (that could't find 
this language), logout and in and Software Sources worked as expected, Sorry 
for crying wolf.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/697095

Title:
  polkit-gnome-authentication-agent-1 crashed with SIGSEGV in
  g_datalist_id_set_data_full() during login

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 697095] Re: polkit-gnome-authentication-agent-1 crashed with SIGSEGV in g_datalist_id_set_data_full() during login

[Lucio M Nicolosi]

#72 Follow Up #2
It seems indeed a bug. Locales was not correctly set at install (alternate). 
(language English - Local Brazil) since this combination is not standard. 
Although "Software Source" was correctly set to "Brazil server" the lack of a 
pertinent "locales" setting caused the crash.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/697095

Title:
  polkit-gnome-authentication-agent-1 crashed with SIGSEGV in
  g_datalist_id_set_data_full() during login

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 494141] Re: CUPS starts after SAMBA; printers are not available (convert cups to upstart)

[Lucio M Nicolosi]

re: #45

This bug was reported on 2009-12-08.

At last some common sense at work. Hope it is also uploaded for
Maverick.

Thanks, Clint Byrum.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/494141

Title:
  CUPS starts after SAMBA; printers are not available (convert cups to
  upstart)

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 494141] Re: CUPS starts after SAMBA; printers are not available (convert cups to upstart)

[Lucio M Nicolosi]

@ Clint,

A long time ago I also reported this bug for Maverick 64. Others
reported for Natty an now Oneiric. Tired of waiting for a solution,
successfully applied the patch explained at #18 to both my Mav and Natty
installs.  Wouldn't be easier to acknowledge that this bug isn't fixed
at all than opening a new thread?

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/494141

Title:
  CUPS starts after SAMBA; printers are not available (convert cups to
  upstart)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/494141/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 494141] Re: CUPS starts after SAMBA; printers are not available (convert cups to upstart)

[Lucio M Nicolosi]

Clint,

In the new bug report, please consider that contrary to the stated at #30 
(Martin Pitt) :
  "For lucid, ... samba reloads the printers every 750 seconds anyway, so it's 
just a matter of waiting..."
At least for some hardware configurations it doesn't happen for Maverick, Natty 
and Oneiric (as seen by the previous posts)

Also, please repost the working solution at #18 so that until a
permanent solution is released, faulty systems can be easily patched.

Many thanks for addressing this issue again.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/494141

Title:
  CUPS starts after SAMBA; printers are not available (convert cups to
  upstart)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/494141/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 827038] Re: gnome system monitor hangs after the "processes" tab is clicked on

[Lucio M Nicolosi]

Same stuff here. Ubuntu 64 10.10 and 11.04. After setting view to "all
processes". application hungs when trying to open  "Processes" tab.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/827038

Title:
  gnome system monitor hangs after the "processes" tab is clicked on

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-system-monitor/+bug/827038/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 494141] Re: CUPS starts after SAMBA; printers are not available (convert cups to upstart)

[Lucio M Nicolosi]

Here my cups.conf file. Bug still present in Maverick 64 updated till
Dec 12, 2010.

** Attachment added: "cups.conf"
   
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/494141/+attachment/1763671/+files/cups.conf

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/494141

Title:
  CUPS starts after SAMBA; printers are not available (convert cups to upstart)

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: [Natty] Realtek ALC888 0x10ec0888 - mic not functional

[Lucio M Nicolosi]

David,

Tried your modified nvidia.conf from bug 771739. Restarted the system
and noticed options (internal mic, front mic, rear mic) previously
available at Maverick are back. Tested Sound Recorder with each one,
switching options on Sound Preferences and opening Sound Recorder at
each time. Noticed, as expected, that internal or front mic don't work
since it is a desktop and the mic connector is at the back. If set to
rear mic some sound can be heard. Moved the input and output volume
controls up and down and couldn't find a way to obtain a decent capture,
just a lot of white noise and a distant whisper. Noticed however that
increasing the output volume leads easily to saturation, in a way much
different of the 10.10 behavior. Even the default output sound at
startup sounds "cracked",  It seems that I'm not facing bug 771739 only.
My tests with alsamixer showed similar results.

Are these codecs much different? Is there a way to load Maverick's alsa
driver into Natty? Although the volume levels at Maverick are modest (no
amplified speakers), alsa works perfectly on this very hardware.

Maverick: snd_hda_codec_nvhdmi   NVIDIA HDMI HD-audio codec
Natty:   snd_hda_codec_hdmi   HDMI HD-audio codec

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  [Natty] Realtek ALC888 0x10ec0888 - mic not functional

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: [Natty] Realtek ALC888 0x10ec0888 - mic not functional

[Lucio M Nicolosi]

Updated to proposed kernel today (2.6.38-9)and tested the sound system
again. To use the right terminology, options at Input connector are:
Rear Microphone, Analog Line-in, Front Microphone. Front and Line-In are
mute, no device connected. Since I could  see changes on the input level
with Sound Recorder, depending on the volume level, decided to reinstall
Skype and let it control the Mic level. There's actual recording but the
level of the voice signal is much lower than the white noise. Observed
that  if Mic is on, the output volume cannot be set above 80% without
output distortion. Playback from a sound file is normal.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  [Natty] Realtek ALC888 0x10ec0888 - mic not functional

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 768752] Re: Microphone Input has no sound - cant record

[Lucio M Nicolosi]

David, tks for your attention.

Natty System just started:

~$ cat /proc/interrupts
   CPU0   CPU1   
 22:234489   IO-APIC-fasteoi   ehci_hcd:usb2, hda_intel
 
Sound Recorder on and recording (+- 50 seconds later)

~$ cat /proc/interrupts
   CPU0   CPU1   
  22:   444489   IO-APIC-fasteoi   ehci_hcd:usb2, hda_intel

(What usb2 has to do with hda_intel?)
 
__

Full interrupt listing:

System just started:

~$ cat /proc/interrupts
   CPU0   CPU1   
  0: 25  1   IO-APIC-edge  timer
  1: 21 23   IO-APIC-edge  i8042
  7:  1  0   IO-APIC-edge
  8:  0  1   IO-APIC-edge  rtc0
  9:  0  0   IO-APIC-fasteoi   acpi
 14:335   3601   IO-APIC-edge  pata_amd
 15:  0  0   IO-APIC-edge  pata_amd
 20:   1486487   IO-APIC-fasteoi   ohci_hcd:usb4
 21:618   4233   IO-APIC-fasteoi   ohci_hcd:usb3, nvidia
 22:234489   IO-APIC-fasteoi   ehci_hcd:usb2, hda_intel
 23:   2959   4771   IO-APIC-fasteoi   ehci_hcd:usb1, ahci
 40:   4667 59   PCI-MSI-edge  sky2@pci::05:00.0
NMI:  0  0   Non-maskable interrupts
LOC:  12231  12179   Local timer interrupts
SPU:  0  0   Spurious interrupts
PMI:  0  0   Performance monitoring interrupts
IWI:  0  0   IRQ work interrupts
RES:  19505  20311   Rescheduling interrupts
CAL:390   2909   Function call interrupts
TLB:   1159   1091   TLB shootdowns
TRM:  0  0   Thermal event interrupts
THR:  0  0   Threshold APIC interrupts
MCE:  0  0   Machine check exceptions
MCP:  1  1   Machine check polls
ERR:  1
MIS:  0

Sound Recorder on and recording:

~$ cat /proc/interrupts
   CPU0   CPU1   
  0: 25  5   IO-APIC-edge  timer
  1:   2478 23   IO-APIC-edge  i8042
  7:  1  0   IO-APIC-edge
  8:  0  1   IO-APIC-edge  rtc0
  9:  0  0   IO-APIC-fasteoi   acpi
 14:399  19373   IO-APIC-edge  pata_amd
 15:  0  0   IO-APIC-edge  pata_amd
 20:  13206487   IO-APIC-fasteoi   ohci_hcd:usb4
 21:618  47956   IO-APIC-fasteoi   ohci_hcd:usb3, nvidia
 22:444489   IO-APIC-fasteoi   ehci_hcd:usb2, hda_intel
 23:   3786   4771   IO-APIC-fasteoi   ehci_hcd:usb1, ahci
 40:  10093 59   PCI-MSI-edge  sky2@pci::05:00.0
NMI:  0  0   Non-maskable interrupts
LOC: 127596 150380   Local timer interrupts
SPU:  0  0   Spurious interrupts
PMI:  0  0   Performance monitoring interrupts
IWI:  0  0   IRQ work interrupts
RES: 123204 126120   Rescheduling interrupts
CAL:485   3001   Function call interrupts
TLB:   3149   8615   TLB shootdowns
TRM:  0  0   Thermal event interrupts
THR:  0  0   Threshold APIC interrupts
MCE:  0  0   Machine check exceptions
MCP:  3  3   Machine check polls
ERR:  1
MIS:  0

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/768752

Title:
  Microphone Input has no sound - cant record

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 768752] Re: Microphone Input has no sound - cant record

[Lucio M Nicolosi]

Just for comparison, same command on functional Maverick, same hw:

Startup:

$ cat /proc/interrupts
   CPU0   CPU1   
   22: 84   1040   IO-APIC-fasteoi   ehci_hcd:usb2, hda_intel

After successful recording, 50 secs:

~$ cat /proc/interrupts
   CPU0   CPU1   
  22:117   1114   IO-APIC-fasteoi   ehci_hcd:usb2, hda_intel

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/768752

Title:
  Microphone Input has no sound - cant record

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 768752] Re: Microphone Input has no sound - cant record

[Lucio M Nicolosi]

David and codeslinger,

So sorry for the uninvited entries. Since I posted a similar bug at:
https://bugs.launchpad.net/ubuntu/+source/gnome-media/+bug/771633 , I
mixed things up.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/768752

Title:
  Microphone Input has no sound - cant record

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 773697] [NEW] gcalctool 5.32.0 - wrong decimal separator - comma insted of dot

[Lucio M Nicolosi]

Public bug reported:

Binary package hint: gcalctool

Description:Ubuntu 10.10
Release:10.10

gcalctool:
  Installed: 5.32.0-0ubuntu4
  Candidate: 5.32.0-0ubuntu4
  Version table:
 *** 5.32.0-0ubuntu4 0
500 http://br.archive.ubuntu.com/ubuntu/ maverick-updates/main amd64 
Packages
100 /var/lib/dpkg/status
 5.32.0-0ubuntu1 0
500 http://br.archive.ubuntu.com/ubuntu/ maverick/main amd64 Packages

Maverick 64 release:  Language: English - Regional formats: Portuguese (BR) - 
Keyboard: USA Alternative International.
With this config. every application (ex. Libreoffice Calc) accept (.) dot as  
decimal separator. Recently gcalctool changed its behaviour and now only 
accepts (,) comma as decimal separator. which is a nuisance on a USA 
Alternative International keyboard.

ProblemType: Bug
DistroRelease: Ubuntu 10.10
Package: gcalctool 5.32.0-0ubuntu4
ProcVersionSignature: Ubuntu 2.6.35-29.51-generic 2.6.35.12
Uname: Linux 2.6.35-29-generic x86_64
NonfreeKernelModules: nvidia
Architecture: amd64
Date: Fri Apr 29 19:26:30 2011
ExecutablePath: /usr/bin/gcalctool
InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release Candidate amd64 
(20101002)
ProcEnviron:
 LANGUAGE=en
 LANG=pt_BR.UTF-8
 LC_MESSAGES=en_GB.UTF-8
 SHELL=/bin/bash
SourcePackage: gcalctool

** Affects: gcalctool (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug maverick

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/773697

Title:
  gcalctool 5.32.0 - wrong decimal separator - comma insted of dot

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 773697] Re: gcalctool 5.32.0 - wrong decimal separator - comma insted of dot

[Lucio M Nicolosi]

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/773697

Title:
  gcalctool 5.32.0 - wrong decimal separator - comma insted of dot

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: [Natty] Realtek ALC888 0x10ec0888 - mic not functional

[Lucio M Nicolosi]

Octavio,

This bug has just been reported for Natty (2011-04-27). I'll stick to
Maverick 64 until this issue is resolved.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  [Natty] Realtek ALC888 0x10ec0888 - mic not functional

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: [Natty] Realtek ALC888 0x10ec0888 - mic not functional

[Lucio M Nicolosi]

Octavio, check the sound quality you get, microphone volume at 100%
should cause some distortion. Anyway, I fiddled with alsamixer
(terminal) but could not find anything wrong. Gracias for the
intervention, I was starting to feel a little lonely over here, but
sure, the developers must be having a lot of work with the new release.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  [Natty] Realtek ALC888 0x10ec0888 - mic not functional

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 773697] Re: gcalctool 5.32.0 - wrong decimal separator - comma insted of dot

[Lucio M Nicolosi]

Checked in Natty 64, same hw and language config.: dot key works, but
calculator screen shows a comma instead of dot, as if the primary
language was set to PT_BR instead of EN.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/773697

Title:
  gcalctool 5.32.0 - wrong decimal separator - comma insted of dot

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 773697] Re: gcalctool 5.32.0 - wrong decimal separator - comma insted of dot

[Lucio M Nicolosi]

Marcel, thanks for your attention.

It would be correct if it showed any symbol for decimal separator when
any of the (dot) keys were pressed (as it used to be). But now it only
happens on Natty, as explained (and it shows a comma, which is strange
but correct, given the Locale settings). On Maverick the (dot) keys are
disabled. It should not happen on an US International keyboard. It
doesn't happen with LibreOffice, or Terminal, this very window
(..) or any other application.

Below my Locale settings:

~$ locale
LANG=pt_BR.UTF-8
LANGUAGE=en
LC_CTYPE="pt_BR.UTF-8"
LC_NUMERIC="pt_BR.UTF-8"
LC_TIME="pt_BR.UTF-8"
LC_COLLATE="pt_BR.UTF-8"
LC_MONETARY="pt_BR.UTF-8"
LC_MESSAGES=en_GB.UTF-8
LC_PAPER="pt_BR.UTF-8"
LC_NAME="pt_BR.UTF-8"
LC_ADDRESS="pt_BR.UTF-8"
LC_TELEPHONE="pt_BR.UTF-8"
LC_MEASUREMENT="pt_BR.UTF-8"
LC_IDENTIFICATION="pt_BR.UTF-8"
LC_ALL=

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/773697

Title:
  gcalctool 5.32.0 - wrong decimal separator - comma insted of dot

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 773697] Re: gcalctool 5.32.0 - wrong decimal separator - comma insted of dot

[Lucio M Nicolosi]

*** This bug is a duplicate of bug 664417 ***
https://bugs.launchpad.net/bugs/664417

Acknoledged, Marcel, it is in fact the same bug. Funny why it didn't
originally appear in my Mav install on October 2011. Pity that it can't
be corrected because of nasty Natty, itself far from stable.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/773697

Title:
  gcalctool 5.32.0 - wrong decimal separator - comma insted of dot

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: [Natty] Realtek ALC888 0x10ec0888 - mic not functional

[Lucio M Nicolosi]

Problem solved. What happened? I don't know.

Puzzled with the fact that I was the only guy in Ubuntu Natty planet
with a crashed sound, decided to give another try.

This time, instead of zsync-inc my .iso sources from
cdimage.ubuntu.com , zsync-ed from the actual Natty release in nearest
mirror (it shouldn't make any difference since I started seriously
testing Natty Beta just after the final release on April 28 - but, in
fact, there was a slight difference, less than .5%). Then burned a USB
stick from within the current and buggy Natty test install, instead of
using the Maverick application .

Booted from the USB stick in "test Ubuntu" mode, completely updated the
stick from the standard source, checked the microphone and of course it
didn't work.

Opened alsamixer in a terminal screen, because of 
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/771739 -
and enabled the rear mic - standard in my system.

Tested the Sound Recorder again and "voilà" it works! This time without
the serious distortions observed before.

Installed Natty on HD again, (third or fourth time) now from this
special stick, tested sound and it works, updated (almost 200 Mb in
file updates up to now) and it works, installed Skype and it still
works, enabled NVidia last video driver, rebooted and Unity is there,
and I still don't like it but at least the sound works.

What really happened? I really don't know, but somehow it is was
"magically" solved. I guess David Henningsson will be
happy to know or perhaps a bit intrigued, like me.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  [Natty] Realtek ALC888 0x10ec0888 - mic not functional

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: [Natty] Realtek ALC888 0x10ec0888 - mic not functional

[Lucio M Nicolosi]

In the last message (#13) instead of: "just after the final release"
please understand: "just before the final release".

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  [Natty] Realtek ALC888 0x10ec0888 - mic not functional

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] [NEW] No microphone capture with Sound Recorder

[Lucio M Nicolosi]

Public bug reported:

Binary package hint: gnome-media

Description:Ubuntu 11.04
Release:11.04
gnome-sound-recorder 2.32.0
After testing Sound Recorder and Skype with Natty 64 and observing that 
microphone doesn' t work, burned the last Natty ISO and ran LIve CD and tested 
again. Problem exists with CD Live on April 27. On Maverick 64 (and previous 
releases) on the same hardware the same microphone works perfectly. (NVidia 
motherboard based Desktop Computer - standard mic on mic input)

ProblemType: Bug
DistroRelease: Ubuntu 11.04
Package: gnome-media 2.32.0-0ubuntu7
ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
Uname: Linux 2.6.38-8-generic x86_64
Architecture: amd64
Date: Wed Apr 27 05:28:05 2011
ExecutablePath: /usr/bin/gnome-sound-recorder
LiveMediaBuild: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110426)
ProcEnviron:
 LANGUAGE=en_US:en
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: gnome-media
UpgradeStatus: No upgrade log present (probably fresh install)
XsessionErrors:
 (gnome-sound-recorder:5275): GStreamer-CRITICAL **: 
gst_implements_interface_cast: assertion `gst_element_implements_interface 
(GST_ELEMENT (from), iface_type)' failed
 (gnome-sound-recorder:5275): GStreamer-CRITICAL **: 
gst_implements_interface_cast: assertion `gst_element_implements_interface 
(GST_ELEMENT (from), iface_type)' failed
 (gnome-sound-recorder:5275): GStreamer-CRITICAL **: 
gst_implements_interface_cast: assertion `gst_element_implements_interface 
(GST_ELEMENT (from), iface_type)' failed

** Affects: gnome-media (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug apport-lpi natty

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  No microphone capture with Sound Recorder

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: No microphone capture with Sound Recorder

[Lucio M Nicolosi]

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  No microphone capture with Sound Recorder

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: Nvidia MCP77/78 HDMI - Realtek ALC888 - mic not functional - Recorder & Skype

[Lucio M Nicolosi]

** Summary changed:

- No microphone capture with Sound Recorder
+ Nvidia MCP77/78 HDMI - Realtek ALC888 - mic not functional - Recorder & Skype

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  Nvidia MCP77/78 HDMI - Realtek ALC888 - mic not functional - Recorder
  & Skype

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: Nvidia MCP77/78 HDMI - Realtek ALC888 - mic not functional - Recorder & Skype

[Lucio M Nicolosi]

!!HDA-Intel Codec information
!!---
--startcollapse--

Codec: Realtek ALC888
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0888
Subsystem Id: 0x10ec
Revision Id: 0x11

Codec: Nvidia MCP77/78 HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de0002
Subsystem Id: 0x10de0101
Revision Id: 0x10

alsa-info.sh printout attached

** Attachment added: "alsa-info.txt.7DppuHr8Ba"
   
https://bugs.launchpad.net/ubuntu/+source/gnome-media/+bug/771633/+attachment/2092313/+files/alsa-info.txt.7DppuHr8Ba

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  Nvidia MCP77/78 HDMI - Realtek ALC888 - mic not functional - Recorder
  & Skype

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: [Natty] Realtek ALC888 0x10ec0888 - mic not functional

[Lucio M Nicolosi]

** Summary changed:

- Nvidia MCP77/78 HDMI - Realtek ALC888 - mic not functional - Recorder & Skype
+ [Natty] Realtek ALC888 0x10ec0888 - mic not functional

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  [Natty] Realtek ALC888 0x10ec0888 - mic not functional

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: [Natty] Realtek ALC888 0x10ec0888 - mic not functional

[Lucio M Nicolosi]

Printout of alsa-info.txt on the same hardware but on functional
Maverick 64 install.

** Attachment added: "alsa-info.txt on Maverick functional install"
   
https://bugs.launchpad.net/ubuntu/+source/gnome-media/+bug/771633/+attachment/2092452/+files/alsa-info.txt.97Xrsx61SM

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  [Natty] Realtek ALC888 0x10ec0888 - mic not functional

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 771633] Re: [Natty] Realtek ALC888 0x10ec0888 - mic not functional

[Lucio M Nicolosi]

>From my discussions at ubuntu-us...@lists.ubuntu.com:
>>>
>>> from hardinfo (functional Maverick 64):
>>>
>>> Loaded Modules:
>>> snd_hda_codec_nvhdmiNVIDIA HDMI HD-audio codec
>>> snd_hda_codec_realtek   Realtek HD-audio codec
>>>
>> from hardinfo (disfunctional Natty):
>>
>> Loaded Modules:
>> snd_hda_codec_hdmiHDMI HD-audio codec
>> snd_hda_codec_realtek Realtek HD-audio codec
>>
>> At least a difference...
>>
> Maybe:
> 

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771633

Title:
  [Natty] Realtek ALC888 0x10ec0888 - mic not functional

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 494141] Re: CUPS starts after SAMBA; printers are not available (convert cups to upstart)

[Lucio M Nicolosi]

Re #48

Clint, every time I have to restart Maverick 64 (hopefully seldon) I
subsequently run "sudo service smbd restart" (too lazy and ignorant to
put it on a script) because printers will not load in Samba. Can't
remember if I had too do it on Lucid. Will try to leave the system alone
for a few hours and see what happens but the last time I did it, I could
not observe what Martin stated at #30 (samba reloads the printers every
750 seconds) by the way (can' help but notice), already commented at #32
on Oct, 2010. Could it be something with my config? This is a Mav. 64
clean install, no leftovers from Lucid (besides /home).

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/494141

Title:
  CUPS starts after SAMBA; printers are not available (convert cups to
  upstart)

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 494141] Re: CUPS starts after SAMBA; printers are not available (convert cups to upstart)

[Lucio M Nicolosi]

System is on now for one hour (3600 secs) after a restart and no signal
of a "Samba reload" as stated at #30. smbclient -L [..] correctly shows
all shares but the printers. Either the same bug exists in Maverick 64
or a similar bug affects at least my system. Anything I could do besides
"sudo service smbd start"?

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/494141

Title:
  CUPS starts after SAMBA; printers are not available (convert cups to
  upstart)

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 494141] Re: CUPS starts after SAMBA; printers are not available (convert cups to upstart)

[Lucio M Nicolosi]

Although the default smb.conf parameter "printing" equals to "cups"
(printing = cups) unless the parameter "printcap name" is set (printcap
name = cups) the printers do not load in the periodical "samba reload"
process referred at #30, thus requiring  a manual "sudo service smbd
restart".

Since I try to keep my smb.conf as lean as possible, trying to keep the
defaults,  I didn't notice this up to some minutes ago when checked the
smb.conf file at #42. My fault, sorry, feel really ashamed, but if one
day someone arrives here looking for a solution for this bug while
riding a Maverick or Natty my mistake can be useful.

So Martin Pitt was right, in Maverick and (by the way) Natty, although
CUPS isn't available at samba startup, and this is a nuisance,  it is
automatically reloaded according to the "printcap cache time" parameter
which defaults to 750, (too much for me, reduced to 300 or five minutes
"printcap cache time = 300") providing you set "printcap name = cups"
which, at the original smb.conf,  looks like default but isn't...

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/494141

Title:
  CUPS starts after SAMBA; printers are not available (convert cups to
  upstart)

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 494141] Re: CUPS starts after SAMBA; printers are not available (convert cups to upstart)

[Lucio M Nicolosi]

Re: #52
It seems I was wrong again. It looks like the printers were loaded when I saved 
the smb.conf file, which of course restarts the service. Left alone, Samba, in 
my Maverick AMD64, will not periodically reload the printers and I still don't 
know why.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/494141

Title:
  CUPS starts after SAMBA; printers are not available (convert cups to
  upstart)

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 770075] [NEW] AisleRiot - "Install additional software packages" broken

[Lucio M Nicolosi]

Public bug reported:

Binary package hint: gnome-games

AisleRiot 2.32.1
Description:Ubuntu 11.04
Release:11.04 updated to Apr 24, 2011
Ubuntu Classic

Opened Aisleriot. Went to View / Card Style / Install Card Themes.
Window "Install additional software packages" opens but button "Install"
appears greyed, no install available.

ProblemType: Bug
DistroRelease: Ubuntu 11.04
Package: aisleriot 1:2.32.1-0ubuntu5
ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2
Uname: Linux 2.6.38-8-generic x86_64
NonfreeKernelModules: nvidia
Architecture: amd64
Date: Sun Apr 24 22:47:53 2011
InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110423)
ProcEnviron:
 LANGUAGE=en_US:en
 LANG=pt_BR.UTF-8
 LC_MESSAGES=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: gnome-games
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: gnome-games (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug apport-lpi natty

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/770075

Title:
  AisleRiot - "Install additional software packages" broken

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 770075] Re: AisleRiot - "Install additional software packages" broken

[Lucio M Nicolosi]

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/770075

Title:
  AisleRiot - "Install additional software packages" broken

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 494141] Re: CUPS starts after SAMBA; printers are not available (convert cups to upstart)

[Lucio M Nicolosi]

Running AMD64 Maverick Beta 2010, 7 Oct. with all updates. This bug is
still present. At least in this recent Maverick clean install (where I
didn't apply the patch referred at #18) there's no "samba reloading the
printers every 750 seconds" as stated at #30. Are there any Cups/Samba
updates still to be released before Oct. 10?

-- 
CUPS starts after SAMBA; printers are not available (convert cups to upstart)
https://bugs.launchpad.net/bugs/494141
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] Re: New Lucid install will not detect a second Sata HD

[Lucio M Nicolosi]

This bug is not present in Maverick Beta AMD64. Did a fresh install with
the Live CD and it went flawless.

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 461470] Re: HDD(s) incorrectly detected

[Lucio M Nicolosi]

Regarding my system, (see #4) just installed Maverick Beta AMD64 (2010
Sept)  and the bug is gone. Live CD recognized all disks.

-- 
HDD(s) incorrectly detected
https://bugs.launchpad.net/bugs/461470
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 561218] Re: thunderbird-bin crashed with SIGSEGV in NS_InvokeByIndex_P()

[Lucio M Nicolosi]

Updated versions of Thunderbird (3.1.6 at the moment) on Lucid and
Maverick 64 do not show this bug anymore, at least on Aim/Aol mail
accounts.

-- 
L M Nicolosi, Eng.
Linux Regist. User #481505 - http://counter.li.org/

-- 
thunderbird-bin crashed with SIGSEGV in NS_InvokeByIndex_P()
https://bugs.launchpad.net/bugs/561218
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 556225] Re: New Lucid install will not detect a second Sata HD

[Lucio M Nicolosi]

Tested Lucid Live CD 10.04.1 - same problem, parted will not detect both
disks.

-- 
New Lucid install will not detect a second Sata HD
https://bugs.launchpad.net/bugs/556225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs