[Bug 1896782] Re: Sound card stops working suddenly

[Surya Kiran]

What I found was every now and then the audio device profile is getting
turned off, which is resulting in no audio.

** Attachment added: "Screenshot_20200926_122004.png"
   
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1896782/+attachment/5414386/+files/Screenshot_20200926_122004.png

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1896782

Title:
  Sound card stops working suddenly

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1896782/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897371] [NEW] don't ship libgc with -Wl,-Bsymbolic-functions

[Dima Pasechnik]

Public bug reported:

This option leads to various issues, see the upstream discussion on 
https://github.com/ivmai/bdwgc/issues/321
Steps to reproduction are given there.

We ran into it in Sagemath, see https://trac.sagemath.org/ticket/30629
Basically, ecl built with this libgc is broken.

** Affects: libgc (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897371

Title:
  don't ship libgc with -Wl,-Bsymbolic-functions

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libgc/+bug/1897371/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 1579585] Re: muon freezes when we enter wrong password

[Rick Timmis]

Hey Jackson

Thanks for feeding back on this. I'll do an install and retry the repo
steps, hopefully its fixed.

Rick

On Fri, 25 Sep 2020 21:59 Jackson Doak, <1579...@bugs.launchpad.net>
wrote:

> I cannot reproduce this in 20.10, can someone reproduce in any remaining
> supported releases?
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1579585
>
> Title:
>   muon freezes when we enter wrong password
>
> Status in muon package in Ubuntu:
>   Confirmed
>
> Bug description:
>   If I run Muon Package Manager and from Properties menu try to
>   Configure Software Sources I am asked for password. If I type wrong
>   one the window with password field freezes and I can't do much except
>   forcing it to close.
>
>   This is only output if I start muon from console:
>
>   soee@TachikomaDell:~$ muon
>   Invalid pixmap specified.
>   No frame loaded
>   No frame loaded
>   No frame loaded
>   No frame loaded
>   No frame loaded
>   No frame loaded
>   Couldn't find the releasechecker script ("/home/soee/.local/share",
> "/usr/share/usr/share/xsessions/plasma", "/usr/local/share", "/usr/share")
>   No frame loaded
>   No frame loaded
>   No frame loaded
>   org.kde.kdesu: Daemon not safe (not sgid), not using it.
>
>   Description:Ubuntu 16.04 LTS
>   Release:16.04
>
>   muon:
> Installed: 4:5.6.0-0ubuntu1
> Candidate: 4:5.6.0-0ubuntu1
> Version table:
>*** 4:5.6.0-0ubuntu1 500
>   500 http://archive.ubuntu.com/ubuntu xenial/universe amd64
> Packages
>   100 /var/lib/dpkg/status
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu/+source/muon/+bug/1579585/+subscriptions
>

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1579585

Title:
  muon freezes when we enter wrong password

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/muon/+bug/1579585/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1875722] Re: Sync dogtag-pki 10.8.3-2 (universe) from Debian unstable (main)

[Hans Joachim Desserud]

https://launchpad.net/ubuntu/+source/dogtag-pki/10.9.4-1

** Changed in: dogtag-pki (Ubuntu)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1875722

Title:
  Sync dogtag-pki 10.8.3-2 (universe) from Debian unstable (main)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dogtag-pki/+bug/1875722/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1894017] Re: Keyboard not working

[Carlos]

I can confirm both the bug and it being fixed in 5.4.18. Thanks!

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1894017

Title:
  Keyboard not working

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894017/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897371] Re: don't ship libgc with -Wl,-Bsymbolic-functions

[Dima Pasechnik]

** Description changed:

- This option leads to various issues, see the upstream discussion on 
+ This option leads to various issues, see the upstream discussion on
  https://github.com/ivmai/bdwgc/issues/321
  Steps to reproduction are given there.
  
  We ran into it in Sagemath, see https://trac.sagemath.org/ticket/30629
- Basically, ecl built with this libgc is broken.
+ Basically, ecl built with this libgc on WSL is broken.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897371

Title:
  don't ship libgc with -Wl,-Bsymbolic-functions

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libgc/+bug/1897371/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1893170] Autopkgtest regression report (zlib/1:1.2.11.dfsg-2ubuntu1.1)

[Ubuntu SRU Bot]

All autopkgtests for the newly accepted zlib (1:1.2.11.dfsg-2ubuntu1.1) for 
focal have finished running.
The following regressions have been reported in tests triggered by the package:

python3.8/3.8.2-1ubuntu1.2 (ppc64el)
cyrus-imapd/3.0.13-5 (s390x, amd64, ppc64el, arm64, armhf)
aspectc++/unknown (ppc64el)
apt/2.0.2ubuntu0.1 (armhf)
dovecot/1:2.3.7.2-1ubuntu3.2 (armhf)
hilive/2.0a-3build2 (ppc64el)
ariba/unknown (ppc64el)
cmake/3.16.3-1ubuntu1 (arm64)
bacula/unknown (ppc64el)
makedumpfile/1:1.6.7-1ubuntu2.1 (ppc64el)
apache2/2.4.41-4ubuntu3.1 (armhf)
pyxplot/unknown (ppc64el)
boost1.67/1.67.0-17ubuntu8 (amd64)
git-annex/unknown (ppc64el)
lighttpd/unknown (arm64)
gemma/0.98.1+dfsg-1 (armhf)
forked-daapd/26.4+dfsg1-1build3 (armhf)


Please visit the excuses page listed below and investigate the failures, 
proceeding afterwards as per the StableReleaseUpdates policy regarding 
autopkgtest regressions [1].

https://people.canonical.com/~ubuntu-archive/proposed-
migration/focal/update_excuses.html#zlib

[1] https://wiki.ubuntu.com/StableReleaseUpdates#Autopkgtest_Regressions

Thank you!

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1893170

Title:
  [Ubuntu 20.10] zlib: DFLTCC compression level switching issues

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-z-systems/+bug/1893170/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897375] Re: virtualbox-guest-dkms 6.1.10-dfsg-1~ubuntu1.20.04.1: virtualbox-guest kernel module failed to build

[Apport retracing service]

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897375

Title:
  virtualbox-guest-dkms 6.1.10-dfsg-1~ubuntu1.20.04.1: virtualbox-guest
  kernel module failed to build

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/1897375/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897375] [NEW] virtualbox-guest-dkms 6.1.10-dfsg-1~ubuntu1.20.04.1: virtualbox-guest kernel module failed to build

[Carlo Carrer]

Public bug reported:

It occurs when I re-downloaded the GRUB

ProblemType: Package
DistroRelease: Ubuntu 20.04
Package: virtualbox-guest-dkms 6.1.10-dfsg-1~ubuntu1.20.04.1
ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60
Uname: Linux 5.4.0-48-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.9
Architecture: amd64
CasperMD5CheckResult: skip
DKMSKernelVersion: 5.8.0-19-generic
Date: Sat Sep 26 11:08:48 2020
DuplicateSignature: 
dkms:virtualbox-guest-dkms:6.1.10-dfsg-1~ubuntu1.20.04.1:/var/lib/dkms/virtualbox-guest/6.1.10/build/vboxguest/r0drv/linux/alloc-r0drv-linux.c:171:15:
 error: implicit declaration of function ‘__get_vm_area’; did you mean 
‘get_vm_area’? [-Werror=implicit-function-declaration]
InstallationDate: Installed on 2020-06-03 (114 days ago)
InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423)
PackageArchitecture: all
PackageVersion: 6.1.10-dfsg-1~ubuntu1.20.04.1
Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 
3.8.2-0ubuntu2
PythonDetails: N/A
RelatedPackageVersions:
 dpkg 1.19.7ubuntu3
 apt  2.0.2ubuntu0.1
SourcePackage: virtualbox
Title: virtualbox-guest-dkms 6.1.10-dfsg-1~ubuntu1.20.04.1: virtualbox-guest 
kernel module failed to build
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: virtualbox (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package focal

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897375

Title:
  virtualbox-guest-dkms 6.1.10-dfsg-1~ubuntu1.20.04.1: virtualbox-guest
  kernel module failed to build

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/1897375/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897375] Re: virtualbox-guest-dkms 6.1.10-dfsg-1~ubuntu1.20.04.1: virtualbox-guest kernel module failed to build

[Gianfranco Costamagna]

linux 5.8 is not yet supported for focal.

** Changed in: virtualbox (Ubuntu)
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897375

Title:
  virtualbox-guest-dkms 6.1.10-dfsg-1~ubuntu1.20.04.1: virtualbox-guest
  kernel module failed to build

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/1897375/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05

[wangjun]

lenovo release new bios

EUCN26WW

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1887190

Title:
  MSFT Touchpad not working on Lenovo Legion-5 15ARH05

To manage notifications about this bug go to:
https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897173] Re: 20.10 Installer crashes with partitions being written but unable to inform kernel of the change

[Leó Kolbeinsson]

The issue occurred on Xubuntu daily/beta  iso 20.10 20200926

on 2 machines 
1. Acer [Aspire] E3-111-P60S UEFI+secure boot 
2. Dell [Optiplex]  7010 UEFI+secure boot

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897173

Title:
  20.10 Installer crashes with partitions being written but unable to
  inform kernel of the change

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/parted/+bug/1897173/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1896918] Re: Upgrade from 18.04 to 20.04 not working

[Daniel Letzeisen]

I don't even seen the nodejs line I quoted in the log now. I may have
been looking at another bug and got my tabs mixed up. My apologies.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1896918

Title:
  Upgrade from 18.04 to 20.04 not working

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1896918/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897378] [NEW] liblzf backport to focal

[Gianfranco Costamagna]

Public bug reported:

Please, this is a bundled library in virtualbox, now packaged as system library.
Unfortunately this is missing in focal, but we need to backport virtualbox from 
time to time (due to kernel changes).

In order to avoid having a special bundled version in virtualbox again
(the library is now stripped from sources), and to introduce bugs in
packaging, I would really like to add this library (leaf) to focal

** Affects: liblzf (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897378

Title:
  liblzf backport to focal

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/liblzf/+bug/1897378/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897379] [NEW] package libperl5.30 5.30.0-9build1 failed to install/upgrade: dpkg-deb --fsys-tarfile subprocess returned error exit status 2

[Chinmay Phanasgaonkar]

Public bug reported:

Don't know i was just installing wine for exe files using sudo after
some 5 mins this error came up

ProblemType: Package
DistroRelease: Ubuntu 20.04
Package: libperl5.30 5.30.0-9build1
ProcVersionSignature: Ubuntu 5.4.0-45.49-generic 5.4.55
Uname: Linux 5.4.0-45-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.4
Architecture: amd64
CasperMD5CheckResult: skip
Date: Sat Sep 26 15:22:01 2020
ErrorMessage: dpkg-deb --fsys-tarfile subprocess returned error exit status 2
InstallationDate: Installed on 2020-09-01 (25 days ago)
InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731)
Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 
3.8.2-0ubuntu2
PythonDetails: /usr/bin/python3.8, Python 3.8.2, unpackaged
RelatedPackageVersions:
 dpkg 1.19.7ubuntu3
 apt  2.0.2ubuntu0.1
SourcePackage: perl
Title: package libperl5.30 5.30.0-9build1 failed to install/upgrade: dpkg-deb 
--fsys-tarfile subprocess returned error exit status 2
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: perl (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package focal

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897379

Title:
  package libperl5.30 5.30.0-9build1 failed to install/upgrade: dpkg-deb
  --fsys-tarfile subprocess returned error exit status 2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/perl/+bug/1897379/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1886148] Re: failure to boot groovy daily

[sudodus]

@ C.S.Cameron,

Thanks for the details about the computer.

Please add the output of the following command to get info about the
graphics chip/card:

sudo lshw -C display

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1886148

Title:
  failure to boot groovy daily

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1886148/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1886148] Re: failure to boot groovy daily

[Norbert]

@all

Could you please systemize all your findings on public Google
Spreadsheet?

Reading whole thread everytime is very difficult to track progress or
regress.
I would recommend the following workflow: test ISO, add result to created
table, add concluding comment here.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1886148

Title:
  failure to boot groovy daily

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1886148/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1882558] Re: desktop - missing templates to create new files

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: gnome-flashback (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1882558

Title:
  desktop - missing templates to create new files

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-flashback/+bug/1882558/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897381] [NEW] during installation of mysql server on ubuntu 20.04.1 LTS , it crashed with a bug

[Muhammad Salam]

Public bug reported:

(Reading database ... 397613 files and directories currently installed.)
Preparing to unpack .../mysql-server-8.0_8.0.21-0ubuntu0.20.04.4_amd64.deb ...
Failed to stop mysql.service: Unit mysql.service not loaded.
invoke-rc.d: initscript mysql, action "stop" failed.
invoke-rc.d returned 5
There is a MySQL server running, but we failed in our attempts to stop it.
Stop it yourself and try again!
dpkg: error processing archive /var/cache/apt/archives/mysql-server-8.0_8.0.21-0
ubuntu0.20.04.4_amd64.deb (--unpack):
 new mysql-server-8.0 package pre-installation script subprocess returned error 
exit status 1
Errors were encountered while processing:
 /var/cache/apt/archives/mysql-server-8.0_8.0.21-0ubuntu0.20.04.4_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

ProblemType: Package
DistroRelease: Ubuntu 20.04
Package: mysql-server-8.0 (not installed)
ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60
Uname: Linux 5.4.0-48-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.9
Architecture: amd64
CasperMD5CheckResult: skip
Date: Sat Sep 26 15:33:33 2020
ErrorMessage: new mysql-server-8.0 package pre-installation script subprocess 
returned error exit status 1
InstallationDate: Installed on 2020-09-24 (1 days ago)
InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731)
Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 
3.8.2-0ubuntu2
PythonDetails: N/A
RelatedPackageVersions:
 dpkg 1.19.7ubuntu3
 apt  2.0.2ubuntu0.1
SourcePackage: mysql-8.0
Title: package mysql-server-8.0 (not installed) failed to install/upgrade: new 
mysql-server-8.0 package pre-installation script subprocess returned error exit 
status 1
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: mysql-8.0 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package focal

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897381

Title:
  during installation of mysql server on ubuntu 20.04.1 LTS , it crashed
  with a bug

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mysql-8.0/+bug/1897381/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1872268] Re: Gnome Shell completely freezes in Ubuntu 20.04 when clicking outside of app icon folders (when ubuntu-dock is loaded)

[Vitor Ferreira Guimarães]

This bug also happens to me. My resolution is 1366 x 768 and is working
again after disabling the Ubuntu dock in the extensions app.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1872268

Title:
  Gnome Shell completely freezes in Ubuntu 20.04 when clicking outside
  of app icon folders (when ubuntu-dock is loaded)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gnome-shell-extension-ubuntu-dock/+bug/1872268/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897381] Re: during installation of mysql server on ubuntu 20.04.1 LTS , it crashed with a bug

[Apport retracing service]

** Tags removed: need-duplicate-check

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897381

Title:
  during installation of mysql server on ubuntu 20.04.1 LTS , it crashed
  with a bug

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mysql-8.0/+bug/1897381/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1826403] Re: Ethernet won't connect when cable is plugged in at boot

[Amine Bouyzem]

Hello everyone
I don't know if this thread is still active but I'm facing the same problem 
with Ubuntu 20.04
I can provide all the necessary informations but I don't know what you will 
need.
Best regards

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1826403

Title:
  Ethernet won't connect when cable is plugged in at boot

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1826403/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1886148] Re: failure to boot groovy daily

[sudodus]

@ Norbert (nrbrtx),

You are welcome to systemize all our findings on public Google
Spreadsheet :-)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1886148

Title:
  failure to boot groovy daily

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1886148/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1886148] Re: failure to boot groovy daily

[Oliver Grawert]

this exists already at http://iso.qa.ubuntu.com/qatracker/%20

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1886148

Title:
  failure to boot groovy daily

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1886148/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1886148] Re: failure to boot groovy daily

[Norbert]

@ogra, @sudodus

I do not have time to read whole thread 125+ comments.

Maybe I want to help with testing, but in current 125-comment view I
can't determine which to test on which hardware, which BIOS/UEFI, which
CPU, which motherboard, which vendor, etc.

As all of you are doing this long time, please create spreadsheet
somewhere for normal comprehensive reuse and to easy the analysis. Maybe
I'll join this party.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1886148

Title:
  failure to boot groovy daily

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1886148/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1896918] Re: Upgrade from 18.04 to 20.04 not working

[Christine]

Thanks for the clarification, Daniel.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1896918

Title:
  Upgrade from 18.04 to 20.04 not working

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1896918/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1871268] Re: Installation fails with Could not configure 'libc6:i386'. , E:Could not perform immediate configuration on 'libgcc-s1:i386'

[Balint Reczey]

** Tags added: regression-update

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1871268

Title:
  Installation fails with Could not configure 'libc6:i386'. , E:Could
  not perform immediate configuration on 'libgcc-s1:i386'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1871268/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1871268] Re: Installation fails with Could not configure 'libc6:i386'. , E:Could not perform immediate configuration on 'libgcc-s1:i386'

[Balint Reczey]

Adding the regression-update tag because the issue in APT is triggered
by the SRU of glibc. It is not a result of a change in glibc, rather
than of glibc having been updated.

** Changed in: glibc (Ubuntu Focal)
 Assignee: Balint Reczey (rbalint) => (unassigned)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1871268

Title:
  Installation fails with Could not configure 'libc6:i386'. , E:Could
  not perform immediate configuration on 'libgcc-s1:i386'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1871268/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1891165] Re: gsettings-desktop-schemas : Breaks: mutter (< 3.31.4) but 3.28.4-0ubuntu18.04.2 is to be installed

[Georg Abenthung]

Same here.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1891165

Title:
  gsettings-desktop-schemas : Breaks: mutter (< 3.31.4) but
  3.28.4-0ubuntu18.04.2 is to be installed

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gsettings-desktop-schemas/+bug/1891165/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 182629] Re: gksu crashed with SIGSEGV in gdk_window_set_opacity()

[Balint Reczey]

The last release where gksu was present is Xenial.

** Also affects: gksu (Ubuntu Xenial)
   Importance: Undecided
   Status: New

** Changed in: gksu (Ubuntu Xenial)
   Status: New => Triaged

** Changed in: gksu (Ubuntu)
   Status: Triaged => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/182629

Title:
  gksu crashed with SIGSEGV in gdk_window_set_opacity()

To manage notifications about this bug go to:
https://bugs.launchpad.net/gksu/+bug/182629/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1886148] Re: failure to boot groovy daily

[C.S.Cameron]

@sudodus

  *-display 
   description: VGA compatible controller
   product: Iris Pro Graphics 6200
   vendor: Intel Corporation
   physical id: 2
   bus info: pci@:00:02.0
   version: 0a
   width: 64 bits
   clock: 33MHz
   capabilities: msi pm vga_controller bus_master cap_list rom
   configuration: driver=i915 latency=0
   resources: irq:33 memory:f600-f6ff memory:e000-efff 
ioport:f000(size=64) memory:c-d

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1886148

Title:
  failure to boot groovy daily

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1886148/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1861280] Re: Desktop icons reshuffle themselves

[2CV67]

I updated to 20.04 in July & the problem is still present for me.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1861280

Title:
  Desktop icons reshuffle themselves

To manage notifications about this bug go to:
https://bugs.launchpad.net/gnome-shell-extension-desktop-icons/+bug/1861280/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897379] Re: package libperl5.30 5.30.0-9build1 failed to install/upgrade: dpkg-deb --fsys-tarfile subprocess returned error exit status 2

[Ubuntu Foundations Team Bug Bot]

Thank you for taking the time to report this bug and helping to make
Ubuntu better.  It seems that there was an error on your system when
trying to install a particular package.  Please execute the following
command, as it will clear your package cache, in a terminal:

sudo apt-get clean

Then try performing the update again.  This will likely resolve your
issue, but the failure could be caused by filesystem or memory
corruption.  So please also run a fsck on your filesystem(s) and a
memory test.  Thanks in advance!

[This is an automated message.  I apologize if it reached you
inappropriately; please just reply to this message indicating so.]

** Tags added: fsys-tarfile-error

** Changed in: perl (Ubuntu)
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897379

Title:
  package libperl5.30 5.30.0-9build1 failed to install/upgrade: dpkg-deb
  --fsys-tarfile subprocess returned error exit status 2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/perl/+bug/1897379/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1886148] Re: failure to boot groovy daily

[sudodus]

Thanks for the details about the computer, where Ubuntu Groovy fails in
UEFI mode, @C.S.Cameron.

Now I think there is information for the developers as well as for users
with similar hardware as yours.

See comments # 115,117-119,121,127.

Summary:

Computer : Gigabyte GB-BXi7-5775R
Processor : Intel(R) Core(TM) i7-5775R CPU @ 3.30GHz

Memory : 7959MB (1088MB used)

Resolution : 1920x1080 pixels
OpenGL Renderer : Mesa Intel(R) Iris(R) Pro Graphics 6200 (BDW GT3)

  *-display
   description: VGA compatible controller
   product: Iris Pro Graphics 6200
   vendor: Intel Corporation
   configuration: driver=i915 latency=0 (used by Ubuntu 20.04 LTS)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1886148

Title:
  failure to boot groovy daily

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1886148/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897385] [NEW] bzr crashed when attempting to build a package for ppa

[Zakhar]

Public bug reported:

Hello,

No need to repeat here that the documentation to properly build a
package is of appalling quality. That has been widely commented and is
probably a major hurdle why people don't "package".

Sorry, so that being said, I am using the little documentation there is
on those pages "Ubuntu packaging guide":

https://packaging.ubuntu.com/html/getting-set-up.html


Environment: On a fresh 20.04 I ran the command:


Steps to reproduce: (following the above documentation from a fresh 20.04)

sudo apt install gnupg pbuilder ubuntu-dev-tools apt-file

(Which pulled a gazillion packages... but ran successfully)

gpg and ssh keys steps where already done from 16.04 and the gpg key has
been imported... this is anyway of no importance since the crash occurs
much before we need that!

Then we move to page 4 of the documentation since this is for packaging
"new software".

https://packaging.ubuntu.com/html/packaging-new-software.html

Now we install as instructed:

sudo apt-get install dh-make bzr-builddeb

Which successfully pulls another couple of packages.

Next step is to build a tar with all my files to compile. I use here the
same commands that works fine with 16.04 and successfully produces a tar
in /tmp/1fichierfs.tar


Then, as instructed I run:

bzr dh-make 1fichierfs 1.7.2~Focal /tmp/1fichierfs.tar


And immediately get a stacktrace:

$ bzr dh-make 1fichierfs 1.7.2~Focal /tmp/1fichierfs.tar
brz: ERROR: AttributeError: 'NoneType' object has no attribute 
'initialize_on_transport'

Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/breezy/plugins/debian/dh_make.py", line 
26, in _get_tree
tree = workingtree.WorkingTree.open(".")
  File "/usr/lib/python3/dist-packages/breezy/workingtree.py", line 201, in open
control = controldir.ControlDir.open(path, _unsupported=_unsupported)
  File "/usr/lib/python3/dist-packages/breezy/controldir.py", line 706, in open
return klass.open_from_transport(t, probers=probers,
  File "/usr/lib/python3/dist-packages/breezy/controldir.py", line 736, in 
open_from_transport
transport, format = _mod_transport.do_catching_redirections(
  File "/usr/lib/python3/dist-packages/breezy/transport/__init__.py", line 
1613, in do_catching_redirections
return action(transport)
  File "/usr/lib/python3/dist-packages/breezy/controldir.py", line 724, in 
find_format
return transport, ControlDirFormat.find_format(transport,
  File "/usr/lib/python3/dist-packages/breezy/controldir.py", line 1166, in 
find_format
raise errors.NotBranchError(path=transport.base)
breezy.errors.NotBranchError: Not a branch: "/tmp/build/".

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/breezy/plugins/debian/dh_make.py", line 
37, in _get_tree
a_controldir = controldir.ControlDir.open_from_transport(
  File "/usr/lib/python3/dist-packages/breezy/controldir.py", line 736, in 
open_from_transport
transport, format = _mod_transport.do_catching_redirections(
  File "/usr/lib/python3/dist-packages/breezy/transport/__init__.py", line 
1613, in do_catching_redirections
return action(transport)
  File "/usr/lib/python3/dist-packages/breezy/controldir.py", line 724, in 
find_format
return transport, ControlDirFormat.find_format(transport,
  File "/usr/lib/python3/dist-packages/breezy/controldir.py", line 1166, in 
find_format
raise errors.NotBranchError(path=transport.base)
breezy.errors.NotBranchError: Not a branch: "/tmp/build/1fichierfs/".

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/breezy/commands.py", line 1016, in 
exception_to_return_code
return the_callable(*args, **kwargs)
  File "/usr/lib/python3/dist-packages/breezy/commands.py", line 1202, in 
run_bzr
ret = run(*run_argv)
  File "/usr/lib/python3/dist-packages/breezy/commands.py", line 759, in 
run_argv_aliases
return self.run(**all_cmd_args)
  File "/usr/lib/python3/dist-packages/breezy/commands.py", line 784, in run
return self._operation.run_simple(*args, **kwargs)
  File "/usr/lib/python3/dist-packages/breezy/cleanup.py", line 136, in 
run_simple
return _do_with_cleanups(
  File "/usr/lib/python3/dist-packages/breezy/cleanup.py", line 166, in 
_do_with_cleanups
result = func(*args, **kwargs)
  File "/usr/lib/python3/dist-packages/breezy/plugins/debian/cmds.py", line 
1385, in run
tree = dh_make.import_upstream(
  File "/usr/lib/python3/dist-packages/breezy/plugins/debian/dh_make.py", line 
83, in import_upstream
tree = _get_tree(package_name)
  File "/usr/lib/python3/dist-packages/breezy/plugins/debian/dh_make.py", line 
42, in _get_tree
branch = create_branch(to_transport.base,
  File "/usr/lib/python3/dist-packages/breezy/controldir.py", line 660, in 
create_branch_convenience
controldir = klass.create(base, format, possible_transports

[Bug 1886148] Re: failure to boot groovy daily

[sudodus]

@ Norbert (nrbrtx),

When you have time and energy, please test

- a current daily iso file of a developing version of the flavour that
you like

- *cloned* to a USB drive

- in both BIOS and UEFI mode

- in the computers where you want future versions of Ubuntu flavours to
work, and that are available for you to test

and share the result here and at the iso testing tracker particularly if
you find a computer and test case, where it should work, but does not.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1886148

Title:
  failure to boot groovy daily

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1886148/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897281] Re: evince suicides in 20.04 but not in 18.04

[buggycub]

> Sebastien Bacher (seb128):
> Could you also maybe include an example to the bug?

Please go to https://b-ok.cc/book/2611763/45278d
"The Cartoons of Cobean"
then hit the blue button [Download (cbr, 113.07 MB)]

Thanks, siggi2

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897281

Title:
  evince suicides  in 20.04 but not in 18.04

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1897281/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1895969] Re: Ubuntu package segfaults, dlang ldc not

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: ldc (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1895969

Title:
  Ubuntu package segfaults, dlang ldc not

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ldc/+bug/1895969/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1892440] Re: Shell text with wrong size in mutter 3.36.4-0ubuntu0.20.04.2 (mostly on Nvidia)

[Alex - WarumLinuxBesserIst -]

@Chistiano Nunes
right, I updated and installed it, but but everything like before. So I 
installed the "temporarily as a workaround" from above again. 

sudo apt install libmutter-6-0=3.36.1-3ubuntu3 gir1.2-mutter-6=3.36.1-3ubuntu3
sudo apt-mark hold libmutter-6-0

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1892440

Title:
  Shell text with wrong size in mutter 3.36.4-0ubuntu0.20.04.2 (mostly
  on Nvidia)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1892440/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05

[Solomon Thatcher]

Would it be possible to replace the track-pad with a different one from
a supported manufacturer?

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1887190

Title:
  MSFT Touchpad not working on Lenovo Legion-5 15ARH05

To manage notifications about this bug go to:
https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897387] [NEW] package linux-image-3.13.0-32-generic 3.13.0-32.57 failed to install/upgrade: subprocess installed post-installation script returned error exit status 17

[Irfan Reza]

Public bug reported:

This is occuring error report

ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: linux-image-3.13.0-32-generic 3.13.0-32.57
ProcVersionSignature: Ubuntu 3.13.0-170.220-generic 3.13.11-ckt39
Uname: Linux 3.13.0-170-generic i686
ApportVersion: 2.14.1-0ubuntu3.29
Architecture: i386
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  irfan  2090 F pulseaudio
Date: Sat Sep 26 18:43:30 2020
DuplicateSignature: 
package:linux-image-3.13.0-32-generic:3.13.0-32.57:subprocess installed 
post-installation script returned error exit status 17
ErrorMessage: subprocess installed post-installation script returned error exit 
status 17
HibernationDevice: RESUME=UUID=c3cf625d-eb7d-40d2-adbe-ad521bc8dd86
InstallationDate: Installed on 2020-09-26 (0 days ago)
InstallationMedia: Ubuntu 12.04.5 LTS "Precise Pangolin" - Release i386 
(20140807.1)
MachineType: LENOVO 20074
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.13.0-170-generic 
root=UUID=3441b8a6-77ee-44c6-83fd-1db74d87007e ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No 
PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1.17
SourcePackage: linux
Title: package linux-image-3.13.0-32-generic 3.13.0-32.57 failed to 
install/upgrade: subprocess installed post-installation script returned error 
exit status 17
UpgradeStatus: Upgraded to trusty on 2020-09-26 (0 days ago)
dmi.bios.date: 06/13/2010
dmi.bios.vendor: LENOVO
dmi.bios.version: 3CCN09WW
dmi.board.vendor: LENOVO
dmi.board.version: To be filled by O.E.M.
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 10
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: 
dmi:bvnLENOVO:bvr3CCN09WW:bd06/13/2010:svnLENOVO:pn20074:pvrLenovo-S10-3c:rvnLENOVO:rn:rvrTobefilledbyO.E.M.:cvnToBeFilledByO.E.M.:ct10:cvrToBeFilledByO.E.M.:
dmi.product.name: 20074
dmi.product.version: Lenovo-S10-3c
dmi.sys.vendor: LENOVO

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: Confirmed


** Tags: apport-package dist-upgrade i386 need-duplicate-check trusty 
varlogdistupgradeapttermlog-examined

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897387

Title:
  package linux-image-3.13.0-32-generic 3.13.0-32.57 failed to
  install/upgrade: subprocess installed post-installation script
  returned error exit status 17

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1897387/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1871268] Re: Installation fails with Could not configure 'libc6:i386'. , E:Could not perform immediate configuration on 'libgcc-s1:i386'

[Alyana]

I can confirm that.

Installation fails on a Notebook with Intel I7-4712MQ and Nvidia GeForce
840M.

Failed both with 20.04 LTS and 20.04.1 LTS with the option to install
the additional drivers and codecs checked.

Installation succeeded with 20.04.1 LTS when NOT choosing to install the
additional drivers.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1871268

Title:
  Installation fails with Could not configure 'libc6:i386'. , E:Could
  not perform immediate configuration on 'libgcc-s1:i386'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1871268/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1871268] Re: Installation fails with Could not configure 'libc6:i386'. , E:Could not perform immediate configuration on 'libgcc-s1:i386'

[Alyana]

Forgot to mention, that I tested that with Ubuntu 20.04 and 20.04.1

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1871268

Title:
  Installation fails with Could not configure 'libc6:i386'. , E:Could
  not perform immediate configuration on 'libgcc-s1:i386'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1871268/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897387] BOT: Examined VarLogDistupgradeApttermlog.gz

[Ubuntu Kernel Bot]

update-initramfs: deferring update (hook will be called later)
   Failed to symbolic-link boot/initrd.img-3.13.0-32-generic to initrd.img:File 
exists at /var/lib/dpkg/info/linux-image-3.13.0-32-generic.postinst line 629.
   dpkg: error processing package linux-image-3.13.0-32-generic (--configure):

   Failed to symbolic-link boot/initrd.img-3.13.0-32-generic to initrd.img:File 
exists at /var/lib/dpkg/info/linux-image-3.13.0-32-generic.postinst line 629.
   dpkg: error processing package linux-image-3.13.0-32-generic (--configure):
subprocess installed post-installation script returned error exit status 17


** Tags added: varlogdistupgradeapttermlog-examined

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897387

Title:
  package linux-image-3.13.0-32-generic 3.13.0-32.57 failed to
  install/upgrade: subprocess installed post-installation script
  returned error exit status 17

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1897387/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897387] Status changed to Confirmed

[Ubuntu Kernel Bot]

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897387

Title:
  package linux-image-3.13.0-32-generic 3.13.0-32.57 failed to
  install/upgrade: subprocess installed post-installation script
  returned error exit status 17

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1897387/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1871268] Re: Installation fails with Could not configure 'libc6:i386'. , E:Could not perform immediate configuration on 'libgcc-s1:i386'

[Claus Appel]

I have a similar problem. For me the Ubuntu 20.04 installer would
consistently crash at 90% (regardless of which hard drive I installed it
to). When I followed the instructions to report the bug, it led me here.

I was able to circumvent the problem by choosing "minimal installation"
and NOT "download updates while installing". That made the installation
succeed.

It might be caused by bad hardware on my system. I don't know.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1871268

Title:
  Installation fails with Could not configure 'libc6:i386'. , E:Could
  not perform immediate configuration on 'libgcc-s1:i386'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1871268/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1768262] Re: Refactor package name to hunspell-fo

[Pander]

** Tags removed: disco eoan
** Tags added: groovy

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1768262

Title:
  Refactor package name to hunspell-fo

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ispell-fo/+bug/1768262/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897389] [NEW] Touchpad not detected in Lenovo Thinkbook

[Hans Terwisscha-Dekker]

Public bug reported:

hans@hans-Lenovo-ThinkBook-14-IIL:~$ cat /proc/bus/input/devices
I: Bus=0019 Vendor= Product=0005 Version=
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
U: Uniq=
H: Handlers=event0 
B: PROP=0
B: EV=21
B: SW=1

I: Bus=0019 Vendor= Product=0001 Version=
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1 
B: PROP=0
B: EV=3
B: KEY=10 0

I: Bus=0019 Vendor= Product=0001 Version=
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
U: Uniq=
H: Handlers=kbd event2 
B: PROP=0
B: EV=3
B: KEY=10 0

I: Bus=0011 Vendor=0001 Product=0001 Version=ab83
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input3
U: Uniq=
H: Handlers=sysrq kbd event3 leds 
B: PROP=0
B: EV=120013
B: KEY=40200 3803078f800d001 fedfffef fffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=275d Product=0ba6 Version=0111
N: Name="USB OPTICAL MOUSE "
P: Phys=usb-:00:14.0-3/input0
S: 
Sysfs=/devices/pci:00/:00:14.0/usb3/3-3/3-3:1.0/0003:275D:0BA6.0001/input/input4
U: Uniq=
H: Handlers=mouse0 event4 
B: PROP=0
B: EV=17
B: KEY=7 0 0 0 0
B: REL=903
B: MSC=10

I: Bus=0019 Vendor= Product= Version=
N: Name="Ideapad extra buttons"
P: Phys=ideapad/input0
S: Sysfs=/devices/pci:00/:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
U: Uniq=
H: Handlers=rfkill kbd event5 
B: PROP=0
B: EV=13
B: KEY=81000800100c03 4430 0 2
B: MSC=10

I: Bus=0003 Vendor=5986 Product=2130 Version=5609
N: Name="Integrated Camera: Integrated C"
P: Phys=usb-:00:14.0-6/button
S: Sysfs=/devices/pci:00/:00:14.0/usb3/3-6/3-6:1.0/input/input6
U: Uniq=
H: Handlers=kbd event6 
B: PROP=0
B: EV=3
B: KEY=10 0 0 0

I: Bus= Vendor= Product= Version=
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci:00/:00:1f.3/sound/card0/input7
U: Uniq=
H: Handlers=event7 
B: PROP=0
B: EV=21
B: SW=10

I: Bus= Vendor= Product= Version=
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci:00/:00:1f.3/sound/card0/input8
U: Uniq=
H: Handlers=event8 
B: PROP=0
B: EV=21
B: SW=4

ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: linux-image-5.4.0-42-generic 5.4.0-42.46
ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44
Uname: Linux 5.4.0-42-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.4
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  hans   1750 F pulseaudio
CasperMD5CheckResult: skip
CurrentDesktop: ubuntu:GNOME
Date: Sat Sep 26 16:23:26 2020
InstallationDate: Installed on 2020-09-26 (0 days ago)
InstallationMedia: Ubuntu 20.04.1 LTS "Focal Fossa" - Release amd64 (20200731)
MachineType: LENOVO 20SL
ProcEnviron:
 TERM=xterm-256color
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=nl_NL.UTF-8
 SHELL=/bin/bash
ProcFB: 0 EFI VGA
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-42-generic 
root=UUID=6b85afff-021d-4aa5-9738-5c8720860630 ro recovery nomodeset
RelatedPackageVersions:
 linux-restricted-modules-5.4.0-42-generic N/A
 linux-backports-modules-5.4.0-42-generic  N/A
 linux-firmware1.187.2
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/15/2020
dmi.bios.vendor: LENOVO
dmi.bios.version: DJCN17WW
dmi.board.name: LVAC/LVAD
dmi.board.vendor: LENOVO
dmi.board.version: SDK0J40697 WIN
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Lenovo ThinkBook 14-IIL
dmi.modalias: 
dmi:bvnLENOVO:bvrDJCN17WW:bd04/15/2020:svnLENOVO:pn20SL:pvrLenovoThinkBook14-IIL:rvnLENOVO:rnLVAC/LVAD:rvrSDK0J40697WIN:cvnLENOVO:ct10:cvrLenovoThinkBook14-IIL:
dmi.product.family: Thinkbook 14-IIL
dmi.product.name: 20SL
dmi.product.sku: LENOVO_MT_20SL_BU_idea_FM_Thinkbook 14-IIL
dmi.product.version: Lenovo ThinkBook 14-IIL
dmi.sys.vendor: LENOVO

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug focal

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897389

Title:
  Touchpad not detected in Lenovo Thinkbook

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1897389/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1889660] Re: deluge not responding to close mouse or key commands

[Cas]

Thanks for the error report

You would need to use "pkill -9 deluge-gtk" to terminate a non-responding 
process. 
Without that 9 signal the kill command defaults to SIGTERM which is the same as 
trying to close the window, i.e. asking for a graceful terminate.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1889660

Title:
  deluge not responding to close mouse or key commands

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/deluge/+bug/1889660/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1889724] Re: app crashes without warning when user clicks on files

[Cas]

Thanks for taking the time to report this issue

Can you start deluge from the terminal and see if any errors are output
when you click files.

Is it one specific torrent that is causing the crash? If so can you
email me details of the torrent(s)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1889724

Title:
  app crashes without warning when user clicks on files

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/deluge/+bug/1889724/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1867092] Re: Failed to set MokListRT: Invalid Parameter

[Chris Williamson]

The day before yesterday, I got the error as originally reported, except
I was running Kubuntu 20.04, got the updates available prompt, opened
Discover, updated shim and shim-signed, waited for both the regular
software update and grub update to finish, and then restarted.

I posted a question on Ask Ubuntu, then found a CentOS bug with a fix I
was able to adapt to my own situation and answer my own question. If
you're a bug fixer, read the first note on the CentOS bug; if you've got
this same problem, read the Ask Ubuntu question and answer:

https://bugs.centos.org/view.php?id=15522#c33203
https://askubuntu.com/questions/1277828/how-do-i-fix-broken-boot-after-shim-update

** Bug watch added: bugs.centos.org/ #15522
   https://bugs.centos.org/view.php?id=15522

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1867092

Title:
  Failed to set MokListRT: Invalid Parameter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1867092/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1895111] Re: not working at all

[Cas]

We are aware of that particular findCaller error in output but it would
not prevent Deluge from running. So will need more information.

Can you provide a full output using the logging options:

https://dev.deluge-torrent.org/wiki/Troubleshooting#EnableDelugeLogging

https://dev.deluge-
torrent.org/wiki/Contributing/BugReporting#CollectBugInformation

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1895111

Title:
  not working at all

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/deluge/+bug/1895111/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1858881] Re: Batch mode doesn't work in version 3.0.2

[Andy Jenkins]

I can confirm that what Christodoulos has said works.

I had a look at the upstream source and I'm surprised that you found it
working on the machines you tested on. It appears that
soundconverter.batch.prepare_files_list() can't deal with the uri-
encoded filenames which are given in line 218 of bin/soundconverter.py:

files = [vfs_encode_filename(f) for f in  files]

Reverting commit 51757e "Fix filename encoding issue" (after checking
out 3.0.2) fixed batch mode for me but presumably whichever issue was
solved by this commit is reintroduced.

I can also confirm that batch mode works properly for me in version
3.1.0.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1858881

Title:
  Batch mode doesn't work in version 3.0.2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/soundconverter/+bug/1858881/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897389] Status changed to Confirmed

[Ubuntu Kernel Bot]

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897389

Title:
  Touchpad not detected in Lenovo Thinkbook

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1897389/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1826403] Re: Ethernet won't connect when cable is plugged in at boot

[Amine Bouyzem]

Ubuntu 20.04

** Changed in: linux (Ubuntu)
   Status: Invalid => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1826403

Title:
  Ethernet won't connect when cable is plugged in at boot

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1826403/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1871268] Re: Installation fails with Could not configure 'libc6:i386'. , E:Could not perform immediate configuration on 'libgcc-s1:i386'

[Boz]

I have a similar problem. Directed here after a fresh install crashed.

I had selected 'install additional drivers'.
I did not have the 'minimal install' checked. 

I will try to reinstall unchecking each and report back.

Information:
USB boot from Ubuntu 20.04.1 LTS ISO.

Processor: AMD FX(tm)-6100 Six-Core Processor
Storage:   2TB Hitachi HUA72302
Display:   TU106 [GeForce RTX 2070]

@Steve Langasek: I have lshw information for my system. My system is a
bit of a mix. As I am fairly new to all of this I wasn't sure it was a
good idea to post that sort of detailed data here. Message me if the
information on my system would help.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1871268

Title:
  Installation fails with Could not configure 'libc6:i386'. , E:Could
  not perform immediate configuration on 'libgcc-s1:i386'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1871268/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1894378] Re: Cannot boot after updating kernel to version 5.4.0-45

[Idan Shinberg]

Sorry to be a buzz kill but this bug started affecting **after** upgrading to 
5.4.0-48.
5.4.0-47 works fine. I'm running on top of Dell XPS 9700.

Any ideas/help are much advised.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1894378

Title:
  Cannot boot after updating kernel to version 5.4.0-45

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894378/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897392] [NEW] Ryzen 4800u, kernel 5.8.11 boot errors (AMD-Vi, ACPI, HDCP, Bluetooth)

[rud]

Public bug reported:

Lenovo IdeaPad S540, 13-ARE
AMD Ryzen 4800U, 16GB dual channel RAM, 13.3" 2560x1600 screen. 
Note this laptop is a lot like the Lenovo Slim 7, it seems this laptop UEFI 
Bios does advertise S3 sleep, the Slim 7 only advertises S2idle. 

The errors are related to AMD Ryzen 4000 series.

Clean (no dual boot) Ubuntu Budgie 20.04.1 with kernel upgraded to
5.8.11.

Full dmesg: https://pastebin.com/nFbHB22d
Journalclt after boot: https://pastebin.com/bcpw8Vhc

erros only from dmesg:
$ sudo dmesg -l err
[2.686094] pci :00:00.2: AMD-Vi: Unable to read/write to IOMMU perf 
counter.
[4.818164] I2C multi instantiate pseudo device driver INT3515:00: IRQ index 
1 not found
[4.836122] snd_pci_acp3x :03:00.5: Invalid ACP audio mode : 0
[4.971650] ACPI Error: No handler for Region [ECSI] (e6d23662) 
[EmbeddedControl] (20200528/evregion-127)
[4.971933] ACPI Error: Region EmbeddedControl (ID=3) has no handler 
(20200528/exfldio-261)
[4.972172] ACPI Error: Aborting method \_SB.UBTC.ECRD due to previous error 
(AE_NOT_EXIST) (20200528/psparse-529)
[4.972447] ACPI Error: Aborting method \_SB.UBTC._DSM due to previous error 
(AE_NOT_EXIST) (20200528/psparse-529)
[4.972736] ucsi_acpi USBC000:00: ucsi_acpi_dsm: failed to evaluate _DSM 2
[5.871695] acp_pdm_mach acp_pdm_mach.0: snd_soc_register_card(acp) failed: 
-517
[6.127547] [drm:dm_helpers_dp_write_dpcd [amdgpu]] *ERROR* Failed to find 
connector for link!
[6.128334] [drm:dm_helpers_dp_write_dpcd [amdgpu]] *ERROR* Failed to find 
connector for link!
[6.128558] [drm:dm_helpers_dp_write_dpcd [amdgpu]] *ERROR* Failed to find 
connector for link!
[6.938706] [drm:mod_hdcp_add_display_to_topology [amdgpu]] *ERROR* Failed 
to add display topology, DTM TA is not initialized.

$ lsb_release -a; uname -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:Ubuntu 20.04.1 LTS
Release:20.04
Codename:   focal
Linux Idefix 5.8.11-050811-generic #202009230858 SMP Wed Sep 23 13:06:55 UTC 
2020 x86_64 x86_64 x86_64 GNU/Linux

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897392

Title:
  Ryzen 4800u, kernel 5.8.11 boot errors (AMD-Vi, ACPI, HDCP, Bluetooth)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1897392/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897393] [NEW] After update Keyboard and mouse interface are screwed up

[Patrick G]

Public bug reported:

1. Mouse double click stopped working. Had to go into Accessibility
settings to get it back and still is not the same.

2. Keyboard is not accepting the first letter pressed after not being
used for a minute or more. It is like the keyboard buffer has to "wake-
up". Also keyboard response is very different.

Both my main keyboard and mouse are wired interfaces to the computer. I
have tried my alternate, Wireless keyboard and mouse and both problems
persist.

ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: ubuntu-release-upgrader-core 1:20.04.25
ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60
Uname: Linux 5.4.0-48-generic x86_64
NonfreeKernelModules: nvidia_modeset nvidia
ApportVersion: 2.20.11-0ubuntu27.8
Architecture: amd64
CasperMD5CheckResult: skip
CrashDB: ubuntu
CurrentDesktop: ubuntu:GNOME
Date: Sat Sep 26 08:38:26 2020
InstallationDate: Installed on 2020-04-23 (156 days ago)
InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017)
PackageArchitecture: all
ProcEnviron:
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: ubuntu-release-upgrader
Symptom: dist-upgrade
UpgradeStatus: Upgraded to focal on 2020-07-24 (64 days ago)
VarLogDistupgradeTermlog:

** Affects: ubuntu-release-upgrader (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug dist-upgrade focal

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897393

Title:
  After update Keyboard and mouse interface are screwed up

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1897393/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1896937] Re: Error with seclabel "apparmor" since upgrading from 18.04 to 20.04

[Wladimir J. van der Laan]

The issue has been resolved (after making sure the libvirt profile is
loading correctly again), thanks! Can be closed.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1896937

Title:
  Error with seclabel "apparmor" since upgrading from 18.04 to 20.04

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1896937/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1866638] Change abandoned on masakari-monitors (stable/train)

[OpenStack Infra]

Change abandoned by Radosław Piliszek (radoslaw.pilis...@gmail.com) on branch: 
stable/train
Review: https://review.opendev.org/727980
Reason: see my last comment

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1866638

Title:
  instancemonitor fails if hypervisors are registered with their fqdn

To manage notifications about this bug go to:
https://bugs.launchpad.net/cloud-archive/+bug/1866638/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897394] [NEW] Please sync gcc-mingw-w64-x86-64 (10.1.0-3+23) from debian Bullseye

[Cybermax]

Public bug reported:

Since Ubuntu Groovy is looking to ship with GCC-10.2, the gcc-mingw-w64
package should be brought up to version 10.1 that is in Debian Bullseye

https://packages.debian.org/bullseye/gcc-mingw-w64-x86-64

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897394

Title:
  Please sync gcc-mingw-w64-x86-64 (10.1.0-3+23) from debian Bullseye

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1897394/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1728527] Change abandoned on masakari-monitors (stable/queens)

[OpenStack Infra]

Change abandoned by Radosław Piliszek (radoslaw.pilis...@gmail.com) on branch: 
stable/queens
Review: https://review.opendev.org/681965
Reason: very old; branch long unmaintained

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1728527

Title:
  hostmonitor can not monitor pacemaker_remote node via cibadmin query

To manage notifications about this bug go to:
https://bugs.launchpad.net/cloud-archive/+bug/1728527/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1866638] Change abandoned on masakari-monitors (stable/stein)

[OpenStack Infra]

Change abandoned by Radosław Piliszek (radoslaw.pilis...@gmail.com) on branch: 
stable/stein
Review: https://review.opendev.org/727981
Reason: see my last comment

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1866638

Title:
  instancemonitor fails if hypervisors are registered with their fqdn

To manage notifications about this bug go to:
https://bugs.launchpad.net/cloud-archive/+bug/1866638/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897395] [NEW] Ubuntu Crash constanly after last patch update

[Víctor]

Public bug reported:

It's impossible to play any game with this operating system.

Ubuntu 20.04.1 LTS crash and crash and crash and throw to desktop all
the fucking time.

I am thinking to delete Ubuntu and never install it again.

The patch updates are always horrible, destroy the stability of the
operating system.

With last patch, I lost the audio of my monitor, and gnome-shell or the
display I don't know what, but crash and crash and crash.

Unstable system, go to Manjaro or Debian, avoid Ubuntu if you want
stability.

ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: ubuntu-release-upgrader-core 1:20.04.25
ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60
Uname: Linux 5.4.0-48-generic x86_64
NonfreeKernelModules: nvidia_modeset nvidia
ApportVersion: 2.20.11-0ubuntu27.9
Architecture: amd64
CasperMD5CheckResult: skip
CrashDB: ubuntu
CurrentDesktop: ubuntu:GNOME
Date: Sat Sep 26 18:02:55 2020
InstallationDate: Installed on 2020-04-24 (154 days ago)
InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423)
PackageArchitecture: all
ProcEnviron:
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=es_ES.UTF-8
 SHELL=/bin/bash
SourcePackage: ubuntu-release-upgrader
Symptom: ubuntu-release-upgrader
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: ubuntu-release-upgrader (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug dist-upgrade focal

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897395

Title:
  Ubuntu Crash constanly after last patch update

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1897395/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1894378] Re: Cannot boot after updating kernel to version 5.4.0-45

[Achille Fouilleul]

@ishinberg0

The issue ami, crysman and I had was related to a specific NVMe
controller (PCI IDs 126f:2263). 5.4.0-48 fixed it for ami and I at
least. I guess your issue is different; I suggest you file a new bug
report with details about your system (dmesg, lspci output etc.).

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1894378

Title:
  Cannot boot after updating kernel to version 5.4.0-45

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894378/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897396] [NEW] Unable to make chromium-chromedriver work with selenium

[Sami Pietila]

Public bug reported:

Trying to use chrome web driver instead of firefox driver in selenium
gives following error. How to use chromium with selenium now when it is
packaged in Snap?

Error message:
selenium.common.exceptions.WebDriverException: Message: unknown error: Chrome 
failed to start: exited abnormally.
  (unknown error: DevToolsActivePort file doesn't exist)
  (The process started from chrome location 
/snap/chromium/current/command-chromium.wrapper is no longer running, so 
ChromeDriver is assuming that Chrome has crashed.)

ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: chromium-chromedriver 1:85.0.4183.83-0ubuntu0.20.04.1
ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60
Uname: Linux 5.4.0-48-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.8
Architecture: amd64
CasperMD5CheckResult: skip
CurrentDesktop: ubuntu:GNOME
Date: Sat Sep 26 19:10:59 2020
InstallationDate: Installed on 2019-11-03 (328 days ago)
InstallationMedia: Ubuntu 19.10 "Eoan Ermine" - Release amd64 (20191017)
SourcePackage: chromium-browser
UpgradeStatus: Upgraded to focal on 2020-03-28 (181 days ago)

** Affects: chromium-browser (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug focal wayland-session

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897396

Title:
  Unable to make chromium-chromedriver work with selenium

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1897396/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1839715] Change abandoned on masakari (master)

[OpenStack Infra]

Change abandoned by Radosław Piliszek (radoslaw.pilis...@gmail.com) on branch: 
master
Review: https://review.opendev.org/675734
Reason: we merged the alternative as a better solution

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1839715

Title:
  masakari fails if hypervisor name does not match nova service name

To manage notifications about this bug go to:
https://bugs.launchpad.net/masakari/+bug/1839715/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897392] Re: Ryzen 4800u, kernel 5.8.11 boot errors (AMD-Vi, ACPI, HDCP, Bluetooth)

[Ubuntu Foundations Team Bug Bot]

Thank you for taking the time to report this bug and helping to make
Ubuntu better.  It seems that your bug report is not filed about a
specific source package though, rather it is just filed against Ubuntu
in general.  It is important that bug reports be filed about source
packages so that people interested in the package can find the bugs
about it.  You can find some hints about determining what package your
bug might be about at https://wiki.ubuntu.com/Bugs/FindRightPackage.
You might also ask for help in the #ubuntu-bugs irc channel on Freenode.

To change the source package that this bug is filed about visit
https://bugs.launchpad.net/ubuntu/+bug/1897392/+editstatus and add the
package name in the text box next to the word Package.

[This is an automated message.  I apologize if it reached you
inappropriately; please just reply to this message indicating so.]

** Tags added: bot-comment

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897392

Title:
  Ryzen 4800u, kernel 5.8.11 boot errors (AMD-Vi, ACPI, HDCP, Bluetooth)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1897392/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1772148] Re: Mount.cifs does not work without keyutils being installed

[krbvroc1]

I just spent days troubleshooting mount.cifs not working and ultimately
determined it was due to this bug. I could mount okay, but no id/group
mapping to the proper users would take place. All files were owned by
the mounter or the uid/gid passed to the mount command. For 'cifsacl'
option, this is not how it is supposed to work.

I started with an sssd setup which didn't work and then tried straight
samba/winbind which equally didn't work.

I use mount.cifs with the 'cifsacl' option. 'cifsacl' will use winbind
to perform the mapping. In the Linux kernel, cifsacl.c calls functions
such as 'sid_to_id' which in turn issues a 'request_key' call.

So the cifs-utils package installs
/etc/request-key.d/cifs.idmap.conf
/etc/request-key.d/cifs.spnego.conf

However the package only has a 'suggestion' of the keyutils package.
Without installing keyutils which creates the /etc/request-key.conf file
AND installs the /sbin/request-key binary,  the 'cifsacl' option doesn't
work / perform the winbind mapping as it should. cifs-utils installed
the cifs.idmap.conf which requires the /sbin/request-key binary be
installed to invoke the cifs.idmap userspace helper.

If this cifs-utils does not change the keyutils to a required
dependency, then I think there at least needs to be some serious
logging/warning when a mount with cifsacl option is done to warn the
user that cifs.idmap is not going to work / be invoked.

One I installed the keyutils package, then everything worked as I
expected (and had been working on a different distro).

After enabling debugging of the cifs module, I had seen the following
messages when keyutils was not installed when accessing the mounted fs
(with cifsacl):

kernel: fs/cifs/smb2ops.c: get_smb2_acl_by_path: rc = 0 ACL len 176
kernel: fs/cifs/cifsacl.c: sid_to_id: Can't map SID os:S-1-5-21-xxx-1115 to a 
uid
kernel: fs/cifs/cifsacl.c: sid_to_id: Can't map SID gs:S-1-5-21-xxx-513 to a gid
kernel: fs/cifs/inode.c: looking for uniqueid=3276811 

Those debug level messages were not very helpful in indicating the
request-key was failing rather than a samba/winbind issue.

This was on a new Ubuntu 20.04 LTS install.

Some comments above indicated an 'it works for me'. However those
scenarios did not include the 'cifsacl' option, so the use of the
cifs.idmap upcall was not exercised.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1772148

Title:
  Mount.cifs does not work without keyutils being installed

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/cifs-utils/+bug/1772148/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05

[Coiby Xu]

Hi,

I've found out that there is something wrong with the GPIO interrupt
controller under Linux. For the details, you can check
https://www.spinics.net/lists/linux-input/msg69267.html.  While I'm
still working on the ultimate solution, you may be interested in the
patch as attached which makes the touchpad work by polling HID reports
from the touchpad.

I've tested the patch for the Synaptics touchpad (MSFT0001:00
06CB:7F28). I guess it will also work for the Elan touchpad (MSFT0001:00
04F3:3140) based on the ACPI DSDT. If not, could you share the following
info with me,

1) dsdt.dsl

Use the following commands to get dsdt.dsl (you need to install acpica
which provides iasl)

 a) sudo acpidump > acpidata.out
 b) acpixtract -sSSDT acpidata.out
 c) acpixtract -sDSDT acpidata.out
 d) iasl -da dsdt.dat ssdt*.dat

2) dmesg dump when booting kernel with the following command line
parameters

i2c-designware-core.dyndbg=+p i2c-hid.debug=1

Thank you!


** Patch added: "polling_pin_state_touchpad.patch"
   
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887190/+attachment/5414497/+files/polling_pin_state_touchpad.patch

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1887190

Title:
  MSFT Touchpad not working on Lenovo Legion-5 15ARH05

To manage notifications about this bug go to:
https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1885245] Re: Error report sent from terminal to Canonical. Not able to upgrade to 20.04.

[Launchpad Bug Tracker]

Status changed to 'Confirmed' because the bug affects multiple users.

** Changed in: ubuntu-release-upgrader (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1885245

Title:
  Error report sent from terminal to Canonical. Not able to upgrade to
  20.04.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1885245/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897392] Re: Ryzen 4800u, kernel 5.8.11 boot errors (AMD-Vi, ACPI, HDCP, Bluetooth)

[rud]

** Package changed: ubuntu => kernel-package (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897392

Title:
  Ryzen 4800u, kernel 5.8.11 boot errors (AMD-Vi, ACPI, HDCP, Bluetooth)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/kernel-package/+bug/1897392/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1894613] Re: risc-v 5.8 kernel oops on ftrace tests

[Colin Ian King]

git bisect good
cfafe260137418d0265d0df3bb18dc494af2b43e is the first bad commit
commit cfafe260137418d0265d0df3bb18dc494af2b43e
Author: Atish Patra 
Date:   Tue Mar 17 18:11:43 2020 -0700

RISC-V: Add supported for ordered booting method using HSM

Currently, all harts have to jump Linux in RISC-V. This complicates the
multi-stage boot process as every transient stage also has to ensure all
harts enter to that stage and jump to Linux afterwards. It also obstructs
a clean Kexec implementation.

SBI HSM extension provides alternate solutions where only a single hart
need to boot and enter Linux. The booting hart can bring up secondary
harts one by one afterwards.

Add SBI HSM based cpu_ops that implements an ordered booting method in
RISC-V. This change is also backward compatible with older firmware not
implementing HSM extension. If a latest kernel is used with older
firmware, it will continue to use the default spinning booting method.

Signed-off-by: Atish Patra 
Reviewed-by: Anup Patel 
Signed-off-by: Palmer Dabbelt 

 arch/riscv/kernel/Makefile  |  3 ++
 arch/riscv/kernel/cpu_ops.c | 10 -
 arch/riscv/kernel/cpu_ops_sbi.c | 81 +
 arch/riscv/kernel/head.S| 26 +
 arch/riscv/kernel/smpboot.c |  2 +-
 arch/riscv/kernel/traps.c   |  2 +-
 6 files changed, 121 insertions(+), 3 deletions(-)
 create mode 100644 arch/riscv/kernel/cpu_ops_sbi.c

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1894613

Title:
  risc-v 5.8 kernel oops on ftrace tests

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1894613/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897399] [NEW] ubuntu 20.4 keeps on bugging for me

[dan]

Public bug reported:

 to ne month ago, I updated from Ubuntu 18.4 to 20.4 and I encounter
such bugs that I had already re-installed Ubuntu 4 times... and now, for
the 5th intend, the installation cannot be completed. And I don't know
what to do anymore...

** Affects: ubiquity (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897399

Title:
  ubuntu 20.4 keeps on bugging for me

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1897399/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1871268] Re: Installation fails with Could not configure 'libc6:i386'. , E:Could not perform immediate configuration on 'libgcc-s1:i386'

[exploiTED]

New crash on my end

Device Information: 
Dell G5 15 5587
Service Tag: B9WHYQ2 
Graphics: NVIDIA GeForce GTX1050 Ti
16gb ram 
128gb NAND SSD 
1TB SSD 


I tried installing the ubuntu-20.04.1-desktop-amd64.iso 
Image today 09-26-2020 and had the installer crash and bring me here...so hi 
guys. 

Not sure the name of the iso image or version other than that it came from 
releases.ubnuntu.com 
Last modified: 2020-07-31 16:52 

*Installed with internet (wifi) 
• Selected install 3rd party devices 
Wiped hard drive of previous 18.04 image. 

Tried installing on two hard drives 
Root "/" dir on 128gb 
Home "/home" on 1tb ssd 

128gb ssd has the following 
1024 /boot partition 
2048 swap area 
The rest of the partition is for root dir "/"

Bug report sent me here after the crash. 
Going to attempt offline and no 3rd party install.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1871268

Title:
  Installation fails with Could not configure 'libc6:i386'. , E:Could
  not perform immediate configuration on 'libgcc-s1:i386'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1871268/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897400] [NEW] アップグレード作業を見積もれません

[渡邉郁]

Public bug reported:

アップグレード作業を見積もれません

アップグレードの計算中に解決できない問題が発生しました。

これは恐らく以下に起因します: 
*非公式なソフトウエアパッケージ 
Launchpad 
PPAから削除するためにppa-purgeパッケージの"ppa-purge"を利用して､もう一度アップデートを試してください｡ 

上記のいずれにも当てはまらない場合は、端末でコマンド 'ubuntu-bug 
ubuntu-release-upgrader-core'を使用してこのバグを報告してください。 この原因を調査するためのログファイルは 
'/var/log/dist-upgrade'にあります。そのファイルはそのアップデートに関する詳細な情報を含んでいます。特に、'main.log'や'apt.log'を見てください。

ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ubuntu-release-upgrader-core 1:18.04.39
ProcVersionSignature: Ubuntu 5.4.0-49.53~18.04.1-generic 5.4.65
Uname: Linux 5.4.0-49-generic x86_64
ApportVersion: 2.20.9-0ubuntu7.18
Architecture: amd64
CrashDB: ubuntu
CurrentDesktop: ubuntu:GNOME
Date: Sun Sep 27 02:01:23 2020
InstallationDate: Installed on 2020-09-10 (16 days ago)
InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190421)
PackageArchitecture: all
ProcEnviron:
 TERM=xterm-256color
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=ja_JP.UTF-8
 SHELL=/bin/bash
SourcePackage: ubuntu-release-upgrader
Symptom: ubuntu-release-upgrader
UpgradeStatus: Upgraded to bionic on 2020-09-26 (0 days ago)
mtime.conffile..etc.update-manager.release-upgrades: 2020-09-23T23:11:56.565517

** Affects: ubuntu-release-upgrader (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug bionic dist-upgrade package-from-proposed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897400

Title:
  アップグレード作業を見積もれません

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1897400/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897400] Re: アップグレード作業を見積もれません

[渡邉郁]

[0927/020211.549447:ERROR:nacl_helper_linux.cc(308)] NaCl helper process 
running without a sandbox!
Most likely you need to configure your SUID sandbox correctly

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897400

Title:
  アップグレード作業を見積もれません

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1897400/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1894378] Re: Cannot boot after updating kernel to version 5.4.0-45

[Ami]

@ishinberg0, as achille-fouilleul wrote, this is probably a different bug.
A few questions you can ask to make sure of that:

- Do you get any error message at all? 
- Which nvme items do you see in /dev when in BusyBox, and which ones when you 
boot normally using kernels that work for you?
- Do you see the problematic controller when running lspci (see crysman's 
comment)?

Good luck!

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1894378

Title:
  Cannot boot after updating kernel to version 5.4.0-45

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1894378/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897402] [NEW] autopkgtest fails in groovy on arm64 and armhf

[Balint Reczey]

Public bug reported:

https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-groovy/groovy/armhf/r/r-cran-openmx/20200906_151809_74358@/log.gz
...
── 9. Error: probit+poisson ML+WLS (@test-discrete.R#290)  ─
Don't know how to interpret factor column 'z4' as numeric.
You may want to specify thresholds for your model like this: 
mxThreshold(vars='z4', nThresh=3)
Backtrace:
 1. OpenMx::mxRun(build())
 2. OpenMx:::runHelper(...)

terminate called after throwing an instance of 'std::runtime_error'
  what():  Problem in dVnames mapping
Aborted (core dumped)
...

** Affects: r-cran-openmx (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: update-excuse

** Bug watch added: github.com/OpenMx/OpenMx/issues #296
   https://github.com/OpenMx/OpenMx/issues/296

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897402

Title:
  autopkgtest fails in groovy on arm64 and armhf

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/r-cran-openmx/+bug/1897402/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897402] Re: autopkgtest fails in groovy on arm64 and armhf

[Balint Reczey]

https://github.com/OpenMx/OpenMx/issues/296

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897402

Title:
  autopkgtest fails in groovy on arm64 and armhf

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/r-cran-openmx/+bug/1897402/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897404] [NEW] Elantech Touchpad not working w/ Synaptics Driver

[T Parys]

Public bug reported:

1) Ubuntu 20.04.1 LTS

2) Package linux-image-5.4.0-48-generic

3) Expected to upgrade to 20.04 with existing hardware already supported

4) Upgraded with odd, erratic behavior from laptop touchpad (Elantech).
Tap to click did not work, but scrolling did. After toying with
settings, tap to click starting working, but scrolling stopped working.

I found a link which provided a fix for me, which was uninstalling the
xorg-input-synaptics package, and forcing the system to use libinput
instead. the user Pilot6 suggested this was a kernel bug and to file a
bug report accordingly.

https://askubuntu.com/questions/1250841/ubuntu-20-04-elantech-touchpad-
not-working

ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: linux-image-5.4.0-48-generic 5.4.0-48.52
ProcVersionSignature: Ubuntu 5.4.0-48.52-generic 5.4.60
Uname: Linux 5.4.0-48-generic x86_64
ApportVersion: 2.20.11-0ubuntu27.9
Architecture: amd64
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  tim1391 F pulseaudio
CasperMD5CheckResult: skip
CurrentDesktop: GNOME
Date: Sat Sep 26 13:48:29 2020
InstallationDate: Installed on 2013-05-22 (2683 days ago)
InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
MachineType: Acer Aspire 5755
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-48-generic 
root=UUID=5c6346b5-949b-4636-8e99-fb4002e2e81d ro acpi_osi=Linux 
acpi_backlight=vendor libata.allow_tpm=1
RelatedPackageVersions:
 linux-restricted-modules-5.4.0-48-generic N/A
 linux-backports-modules-5.4.0-48-generic  N/A
 linux-firmware1.187.3
SourcePackage: linux
UpgradeStatus: Upgraded to focal on 2020-09-26 (0 days ago)
dmi.bios.date: 09/07/2011
dmi.bios.vendor: Acer
dmi.bios.version: V1.14
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: JV51_HR
dmi.board.vendor: Acer
dmi.board.version: Base Board Version
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: V1.14
dmi.modalias: 
dmi:bvnAcer:bvrV1.14:bd09/07/2011:svnAcer:pnAspire5755:pvrV1.14:rvnAcer:rnJV51_HR:rvrBaseBoardVersion:cvnAcer:ct10:cvrV1.14:
dmi.product.name: Aspire 5755
dmi.product.version: V1.14
dmi.sys.vendor: Acer
modified.conffile..etc.default.apport: [modified]
mtime.conffile..etc.default.apport: 2015-05-16T07:56:07.188547

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug focal

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897404

Title:
  Elantech Touchpad not working w/ Synaptics Driver

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1897404/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897404] Status changed to Confirmed

[Ubuntu Kernel Bot]

This change was made by a bot.

** Changed in: linux (Ubuntu)
   Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897404

Title:
  Elantech Touchpad not working w/ Synaptics Driver

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1897404/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1892440] Re: Shell text with wrong size in mutter 3.36.4-0ubuntu0.20.04.2 (mostly on Nvidia)

[sdk345]

I would like to update that my status update from fix committed to fix
released was caused by an accident, and thus should be disregarded

Sorry in advance for any confusion caused

** Changed in: mutter (Ubuntu Focal)
   Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1892440

Title:
  Shell text with wrong size in mutter 3.36.4-0ubuntu0.20.04.2 (mostly
  on Nvidia)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1892440/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897405] [NEW] fastqc FTBFS due to libsis-jhdf5-java FTBFS

[Balint Reczey]

Public bug reported:

libsis-jhdf5-java FTBFS due to tests failing and fastqc is waiting for 
libsis-jhdf5-java to be built.
Libsis-jhdf-java is being fixed in Debian in 19.04.0+dfsg-2 by disabling tests 
but just picking that fix for Ubuntu 20.10 is not a great idea:
https://tracker.debian.org/pkg/libsis-jhdf5-java

** Affects: fastqc (Ubuntu)
 Importance: Undecided
 Status: New

** Affects: libsis-jhdf5-java (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: update-excuse

** Also affects: libsis-jhdf5-java (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897405

Title:
  fastqc FTBFS due to libsis-jhdf5-java FTBFS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/fastqc/+bug/1897405/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897394] Re: Please sync gcc-mingw-w64-x86-64 (10.1.0-3+23) from debian Bullseye

[Hans Joachim Desserud]

Thanks for reporting.

Since the Groovy release is fast approaching, I suppose this will need a
FreezeException, please see
https://wiki.ubuntu.com/FreezeExceptionProcess

Also, based on the version number (22~exp1ubuntu4) this package
currently has an Ubuntu delta. I haven't checked if those changes have
been included in the Debian package, but if they aren't the package
cannot be synced but need to be merged manually to preserve the changes.

** Package changed: ubuntu => gcc-mingw-w64 (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897394

Title:
  Please sync gcc-mingw-w64-x86-64 (10.1.0-3+23) from debian Bullseye

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gcc-mingw-w64/+bug/1897394/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

RE: [Bug 1896848] Re: Upgrade from 18.04 to 20.04: "An unresolvable problem occurred while calculating the upgrade." apt.log shows hundreds of broken things.

[Chuck Cooperman]

Sorry, I already went ahead with a clean install. I do recall having a
similar problem with 16.04 > 18.04 and that gnuradio had something to do
with it.

From: Daniel Letzeisen
Sent: Friday, September 25, 2020 1:20 AM
To: coope...@gmail.com
Subject: [Bug 1896848] Re: Upgrade from 18.04 to 20.04: "An unresolvable 
problem occurred while calculating the upgrade." apt.log shows hundreds of 
broken things.

I don't claim to be an expert, but if possible, remove gnuradio (and
gnuradio-dev) and reinstall it after upgrade. That's what looks to be
causing the cascade of errors in your apt log.

Let me/us know if that works.

** Changed in: ubuntu-release-upgrader (Ubuntu)
   Status: New => Incomplete

--
You received this bug notification because you are subscribed to the bug
report.
https://bugs.launchpad.net/bugs/1896848

Title:
  Upgrade from 18.04 to 20.04: "An unresolvable problem occurred while
  calculating the upgrade." apt.log shows hundreds of broken things.

Status in ubuntu-release-upgrader package in Ubuntu:
  Incomplete

Bug description:
  Upgrade from 18.04 to 20.04:

  Could not calculate the upgrade

  An unresolvable problem occurred while calculating the upgrade.

   If none of this applies, then please report this bug using the
  command 'ubuntu-bug ubuntu-release-upgrader-core' in a terminal. If
  you want to investigate this yourself the log files in '/var/log/dist-
  upgrade' will contain details about the upgrade. Specifically, look at
  'main.log' and 'apt.log'."

  apt.log shows hundreds of broken things.

  ProblemType: Bug
  DistroRelease: Ubuntu 18.04
  Package: ubuntu-release-upgrader-core 1:18.04.38
  ProcVersionSignature: Ubuntu 4.15.0-118.119-generic 4.15.18
  Uname: Linux 4.15.0-118-generic x86_64
  ApportVersion: 2.20.9-0ubuntu7.17
  Architecture: amd64
  CrashDB: ubuntu
  CurrentDesktop: ubuntu:GNOME
  Date: Wed Sep 23 19:03:47 2020
  InstallationDate: Installed on 2016-01-04 (1724 days ago)
  InstallationMedia: Ubuntu 15.10 "Wily Werewolf" - Release amd64 (20151021)
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: ubuntu-release-upgrader
  UpgradeStatus: Upgraded to bionic on 2020-09-23 (0 days ago)
  VarLogDistupgradeTermlog:

  mtime.conffile..etc.update-manager.release-upgrades:
2020-09-23T18:00:44.468934

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1896848/+subscriptions

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1896848

Title:
  Upgrade from 18.04 to 20.04: "An unresolvable problem occurred while
  calculating the upgrade." apt.log shows hundreds of broken things.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1896848/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1892440] Re: Shell text with wrong size in mutter 3.36.4-0ubuntu0.20.04.2 (mostly on Nvidia)

[Cristiano Nunes]

** Changed in: mutter (Ubuntu Focal)
   Status: Fix Released => Fix Committed

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1892440

Title:
  Shell text with wrong size in mutter 3.36.4-0ubuntu0.20.04.2 (mostly
  on Nvidia)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1892440/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897407] [NEW] Please remove riscv64 binaries for 2.3.3+dfsg-1

[Balint Reczey]

Public bug reported:

FTBFS on riscv64 (also fails in Debian) holds back its migration to the
release pocket

root@gg-libyaml:~# reverse-depends barrier
No reverse dependencies found
root@gg-libyaml:~# reverse-depends -b barrier
No reverse dependencies found

** Affects: barrier (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: update-excuse

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897407

Title:
  Please remove riscv64 binaries for 2.3.3+dfsg-1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/barrier/+bug/1897407/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1871268] Re: Installation fails with Could not configure 'libc6:i386'. , E:Could not perform immediate configuration on 'libgcc-s1:i386'

[exploiTED]

The installation finished successfully with no internet connection and
no 3rd party software installed but the system doesn't boot to grub
(different from this bug report but an update to the installation
nonetheless).

Details again: 
Device Information:
Dell G5 15 5587
Service Tag: B9WHYQ2
Graphics: NVIDIA GeForce GTX1050 Ti
16gb ram
128gb NAND SSD
1TB SSD

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1871268

Title:
  Installation fails with Could not configure 'libc6:i386'. , E:Could
  not perform immediate configuration on 'libgcc-s1:i386'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-cdimage/+bug/1871268/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1897394] Re: Please sync gcc-mingw-w64-x86-64 (10.1.0-3+23) from debian Bullseye

[Stephen Kitt]

The Ubuntu delta is no longer necessary with the current Debian package
(the gm2 unpack step has been fixed in a different way).

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1897394

Title:
  Please sync gcc-mingw-w64-x86-64 (10.1.0-3+23) from debian Bullseye

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/gcc-mingw-w64/+bug/1897394/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1876943] Re: package grub-pc 2.04-1ubuntu26 failed to install/upgrade: installed grub-pc package post-installation script subprocess returned error exit status 1

[Douglas E Engert]

Running VirtualBox 6.1 on Windows 10, I cloned Xubuntu 18.04 VM to new ssd and 
resized the .vhd which ran gparted to move swap are resizing the root 
partition. Then upgraded to 20.04. This caused all sorts of problems and I 
followed: 
https://askubuntu.com/questions/1231849/how-to-fix-update-problems-ubuntu-20-04
to get a running system. 

I got the following before and continue to get it even after following the 
above URL: 
  "installed grub-pc package post-installation script subprocess returned error 
exit status 1"
when anything is installed. 

By modiging /var/lib/dpkg/info/grub-pc.postinst:
-- grub-pc.postinst.dee.orig2020-09-26 14:04:44.012323484 -0500
+++ grub-pc.postinst2020-09-26 14:05:50.028324633 -0500
@@ -1,6 +1,8 @@
 #!/bin/bash
 set -e
-
+PS4='Line ${LINENO}: '
+set -x
+set -v
 # Apply a sed expression using extended regular expressions in place to a
 # file, if it exists.  The file is the first argument in order to work
 # neatly with apply_conf_tweaks.

Then running:
sudo dpkg --configure -a
The last few lines are:

Line 677: '[' true = false ']'
Line 680: db_input critical grub-pc/install_devices_empty
Line 66: _db_cmd 'INPUT critical' grub-pc/install_devices_empty
Line 42: _db_internal_IFS=' 
'
Line 43: IFS=' '
Line 44: printf '%s\n' 'INPUT critical grub-pc/install_devices_empty'
Line 47: IFS='
'
Line 48: read -r _db_internal_line
Line 49: IFS='  
'
Line 52: RET='30 question skipped'
Line 53: case ${_db_internal_line%%[]*} in
Line 59: return 30
Line 690: exit 1
rm -f /tmp/grub.ekWa3OkQHZ
Line 1: rm -f /tmp/grub.ekWa3OkQHZ
dpkg: error processing package grub-pc (--configure):
 installed grub-pc package post-installation script subprocess returned error 
exit status 1
Errors were encountered while processing:
 grub-pc

-
This shows problem is with "grub-pc/install_devices_empty"

I can provide other debugging info, or test a fix if that would help.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1876943

Title:
  package grub-pc 2.04-1ubuntu26 failed to install/upgrade: installed
  grub-pc package post-installation script subprocess returned error
  exit status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1876943/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1869115] Re: python sys.path different per user account - ImportError no module named (Focal)

[OwN]

This is now an issue in Ubuntu 18.04 as well.  I'm guessing whatever
broke was backported into 18.04 as well.

See these scripts as examples:

Version for 18.04 and 20.04:

https://raw.githubusercontent.com/earnolmartin/EHCP-Force-
Edition/master/ehcp/etc/pam/pam_dbauth_vsftpd_ubuntu_20_plus.py

Version for 16.04:

https://raw.githubusercontent.com/earnolmartin/EHCP-Force-
Edition/master/ehcp/etc/pam/pam_dbauth_vsftpd.py

Difference is that in 18.04 and 20.04, I must set the path in the
script:

sys.path.insert(0, '/usr/local/lib/python2.7/dist-packages')
sys.path.insert(0, '/usr/lib/python2.7/dist-packages')

If I do not, I get this error:

Sep 26 19:10:41 host /etc/security/pam_dbauth_smtp.py[9965]: Traceback (most 
recent call last):
Sep 26 19:10:41 host /etc/security/pam_dbauth_smtp.py[9965]:   File 
"/etc/security/pam_dbauth_smtp.py", line 64, in 
Sep 26 19:10:41 host /etc/security/pam_dbauth_smtp.py[9965]: from 
passlib.hash import mysql41
Sep 26 19:10:41 host /etc/security/pam_dbauth_smtp.py[9965]: ImportError: No 
module named passlib.hash
Sep 26 19:10:41 host saslauthd[9965]: DEBUG: auth_pam: pam_authenticate failed: 
Error in service module

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1869115

Title:
  python sys.path different per user account - ImportError no module
  named (Focal)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/python2.7/+bug/1869115/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1869115] Re: python sys.path different per user account - ImportError no module named (Focal and Bionic Beaver)

[OwN]

** Summary changed:

- python sys.path different per user account - ImportError no module named 
(Focal)
+ python sys.path different per user account - ImportError no module named 
(Focal and Bionic Beaver)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1869115

Title:
  python sys.path different per user account - ImportError no module
  named (Focal and Bionic Beaver)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/python2.7/+bug/1869115/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1896848] Re: Upgrade from 18.04 to 20.04: "An unresolvable problem occurred while calculating the upgrade." apt.log shows hundreds of broken things.

[Daniel Letzeisen]

No problem. I prefer clean installs (or rolling release  distros)
myself.

** Changed in: ubuntu-release-upgrader (Ubuntu)
   Status: Incomplete => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1896848

Title:
  Upgrade from 18.04 to 20.04: "An unresolvable problem occurred while
  calculating the upgrade." apt.log shows hundreds of broken things.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1896848/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1612916] Re: [Tohsiba Portege Z20T-C] Internal speakers don't work after standby

[Michael]

Only workaround is to not use suspend to ram, but suspend to disk.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1612916

Title:
  [Tohsiba Portege Z20T-C] Internal speakers don't work after standby

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1612916/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1895424] Re: duplicate rc local service

[Shawn Everett]

Seems to only happen on systems that upgrade from 16LTS to 18LTS to
20TLS (using do-release-upgrade -d)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1895424

Title:
  duplicate rc local service

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1895424/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1887190] Re: MSFT Touchpad not working on Lenovo Legion-5 15ARH05

[Ubuntu Foundations Team Bug Bot]

The attachment "polling_pin_state_touchpad.patch" seems to be a patch.
If it isn't, please remove the "patch" flag from the attachment, remove
the "patch" tag, and if you are a member of the ~ubuntu-reviewers,
unsubscribe the team.

[This is an automated message performed by a Launchpad user owned by
~brian-murray, for any issues please contact him.]

** Tags added: patch

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1887190

Title:
  MSFT Touchpad not working on Lenovo Legion-5 15ARH05

To manage notifications about this bug go to:
https://bugs.launchpad.net/pop-os/+bug/1887190/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1851518] Re: [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on internal speakers, very very quiet on headphones

[John Hoff]

@PowerKiKi

PowerKiKi, I had to reload my pc for another project, and after
reloading I found that same lack of stickiness...  Not wanting to go
backwards, I felt I had to chase down the full fix.  This should fix
your issue (caused by pulse) if you want to skip the background audio
file...I also improved the Daemon script to ensure later execution and
added a second daemon to run the script on suspend/restore.  With this
setup I have not had to manually run the script in a week or so.  Its
like sound just works normally now...


Fresh Install Setup Steps

sudo apt-get install alsa-tools
Rename alsa-base to bkup/etc/modprobe.d/alsa-base.conf
placed TO912.sh script with verbs and set as 777 +x
create and placed $ sudo chmod 664 /etc/systemd/system/ionsound.service 


[Unit]
Description=Custom Sound

[Service]
Type=idle
ExecStart=/home/ion420/Hoff/Linux_Files/Ion_Audio/TO912.sh

[Install]
WantedBy=multi-user.target

create and placed $ sudo chmod 664 
/etc/systemd/system/ionsoundsleep.service

[Unit]
Description=Custom Sound Sleep Fix

[Service]
Type=idle
ExecStart=/home/ion420/Hoff/Linux_Files/Ion_Audio/TO912.sh

[Install]
WantedBy=suspend.target

activate
sudo systemctl daemon-reload
sudo systemctl enable ionsound.service  
sudo systemctl enable ionsoundsleep.service 

turn off pulse idle
sudo gedit /etc/pulse/default.pa
Add comments to ### load-module module-suspend-on-idle

verify script runs at boot and sound works ..

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1851518

Title:
  [950SBE/951SBE, Realtek ALC298, Speaker, Internal] No sound on
  internal speakers, very very quiet on headphones

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1851518/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 1892440] Re: Shell text with wrong size in mutter 3.36.4-0ubuntu0.20.04.2 (mostly on Nvidia)

[Juan Avila]

It's not working for me using nvidia graphic card. The only way to work around 
is to use lightdm instead of gdm3, but I can't login automatically.
I started using Ubuntu budgie in dual boot until the bug is fixed.
I tried Kubuntu and the bug is also in Kubuntu.

Envoyé de Mailspring 
(https://link.getmailspring.com/link/bcb6601f-ac5e-4c6b-b97c-89bccd4fa...@getmailspring.com/0?redirect=https%3A%2F%2Fgetmailspring.com%2F&recipient=MTg5MjQ0MEBidWdzLmxhdW5jaHBhZC5uZXQ%3D),
 la meilleure application de messagerie gratuite pour le travail
On sept. 23 2020, at 10:51 am, Sujit Kumar <1892...@bugs.launchpad.net> wrote:
> I can confirm this bug is fixed when I updated mutter to
> 3.36.1-1ubuntu0.20.04.1. Using NVIDIA Graphics card.
>
> --
> You received this bug notification because you are subscribed to a
> duplicate bug report (1893792).
> https://bugs.launchpad.net/bugs/1892440
>
> Title:
> Shell text with wrong size in mutter 3.36.4-0ubuntu0.20.04.2 (mostly
> on Nvidia)
>
> Status in mutter package in Ubuntu:
> Fix Released
> Status in mutter source package in Focal:
> Fix Committed
> Status in mutter source package in Groovy:
> Fix Released
>
> Bug description:
> [ Impact ]
>
> GNOME Shell starts with a wrong text size
>
> [ Test case ]
> In a terminal run:
> - Xephyr :2
>
> In another one:
> - env DISPLAY=:2 dbus-run-session gnome-shell --x11
>
> The shell should run in the embedded window, with the correct text
> size, running it again (without closing Xephyr window, but stopping
> the shell execution) should not bigger than expected.
>
> -- Other test case (hw dependant)
> - Login, ensure that the Shell text size matches the configured one.
>
> [ Regression potential ]
> Initial UI scaling when fractional scaling is enabled is wrong.
>
> [ Workaround ]
> Run on startup:
> - gsettings set org.gnome.desktop.interface scaling-factor \
> $(gsettings get org.gnome.desktop.interface scaling-factor | cut -d' ' -f2)
>
>
> ---
> See also bug 1892521.
> The package mutter version (3.36.4-0ubuntu0.20.04.2) for Ubuntu 20.04
> causes small text in GNOME Shell menu with NVIDIA cards.
>
> With a previous version (3.36.4-0ubuntu0.20.04.1) all works fine. The problem 
> is after update to the (3.36.4-0ubuntu0.20.04.2).
> ---
> ProblemType: Bug
> ApportVersion: 2.20.11-0ubuntu27.8
> Architecture: amd64
> CasperMD5CheckResult: skip
> CurrentDesktop: ubuntu:GNOMEDistroRelease: Ubuntu 20.04
> InstallationDate: Installed on 2020-08-18 (2 days ago)
> InstallationMedia: Ubuntu 20.04.1 2020.08.15 LTS "Custom Focal Fossa" 
> (20200815)
> NonfreeKernelModules: nvidia_modeset nvidia
> Package: mutter 3.36.4-0ubuntu0.20.04.2
> PackageArchitecture: amd64
> ProcVersionSignature: Ubuntu 5.4.0-42.46-generic 5.4.44
> Tags: focal
> Uname: Linux 5.4.0-42-generic x86_64
> UpgradeStatus: No upgrade log present (probably fresh install)
> UserGroups: adm cdrom dip lpadmin lxd plugdev sambashare sudo
> _MarkForUpload: True
> modified.conffile..etc.default.apport:
> # set this to 0 to disable apport, or to 1 to enable it
> # you can temporarily override this with
> # sudo service apport start force_start=1
> enabled=0
> mtime.conffile..etc.default.apport: 2020-08-15T17:44:36
>
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1892440/+subscriptions
>

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1892440

Title:
  Shell text with wrong size in mutter 3.36.4-0ubuntu0.20.04.2 (mostly
  on Nvidia)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mutter/+bug/1892440/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs