[Bug 327341] Re: gparted does not open/run.
after disconnecting usb floppy drive from pc - sudo gparted --> OPENED UP free of errors but - gksu gparted --> opened up BUT with errors see attached for details. problem narrowed down to usb floppy drive, gksu command . regards, peter ** Attachment added: "eeeH1000_gksu-gparted_afterFloppyDrDisconnected" http://launchpadlibrarian.net/22433079/eeeH1000_gksu-gparted_afterFloppyDrDisconnected -- gparted does not open/run. https://bugs.launchpad.net/bugs/327341 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 320813] Re: [drm] compiz animations cause temporary freezes with vblank
Yesterday before I went to sleep I rebooted by G45 machine and when left it running over night with both of the drm patches applied. When I woke up again I the bug was happening, so that means that I get this freezes even without suspend/resume if I just let X.org run sufficiently long (I also had like 2-3 windows on each side of the cube when it was idling over night). Another scary note is that I now currently see this on the G45 machine (I used to have around 60 FPS in glxgears before I applied the drm patches because of the slow down to screen Hz but now it's getting crazy... basically I can't even see the gears moving at all and the FPS is single digit): mn...@kingfish:~$ glxgears 49 frames in 5.1 seconds = 9.528 FPS 20 frames in 10.2 seconds = 1.957 FPS 20 frames in 10.2 seconds = 1.960 FPS 20 frames in 9.2 seconds = 2.170 FPS (Note: that's 2 frames per second, and not 2000 FPS!!) -- [drm] compiz animations cause temporary freezes with vblank https://bugs.launchpad.net/bugs/320813 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 307928] Re: [needs-packaging] md4sum hash utility requests to be added
So is md5hash, I'll hope a solution will be found http://revu.ubuntuwire.com/p/md4sum -- [needs-packaging] md4sum hash utility requests to be added https://bugs.launchpad.net/bugs/307928 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 309154] Re: Veho Quinque MP5 player USB disk read capacity failed log messages
Hello PicKit2! Could you please tell us if this report is related to bug #58349 ? Thank you. ** Changed in: linux (Ubuntu) Sourcepackagename: None => linux Status: New => Incomplete -- Veho Quinque MP5 player USB disk read capacity failed log messages https://bugs.launchpad.net/bugs/309154 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 295251] Re: Samsung NC10 brightness keys block keyboard and produce all-or-nothing effect
Zygmunt Krynicki [2009-02-09 19:08 -]: > It's still broken on .19 BTW (backlight control keys just hang the keyboard > in X) That's an effect of a keypress acting as a series of indefinite keypresses. Try switching to Ctrl+Alt+F1 and back, that helped on my friend's NC10. -- Samsung NC10 brightness keys block keyboard and produce all-or-nothing effect https://bugs.launchpad.net/bugs/295251 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 237970] Re: firefox-3.0 breaks with NFS home directory
Alexander Sack wrote: > nfs-common seems to ship that directory: > > cat debian/nfs-common.dirs | grep var.lib.nfs > var/lib/nfs > var/lib/nfs/sm > var/lib/nfs/sm.bak > var/lib/nfs/rpc_pipefs > > > Did you remove it manually? > > - Alexander > > Yes (sort of). Can you post output of your error console in firefox? -Stefan -- firefox-3.0 breaks with NFS home directory https://bugs.launchpad.net/bugs/237970 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 275111] Re: knetworkmanager fails to start OpenVPN tunnel
kicking this into gear would indeed be nice... Maybe I misunderstand the principles of ubuntus QA, and what upgrades of a stable release distro mean, but imho it's at best not very userfriendly if such a bug is not dealt with at all. At least it's just a poor QA. What's the point of reporting the bug here at all? Should we report it upstream instead? -- knetworkmanager fails to start OpenVPN tunnel https://bugs.launchpad.net/bugs/275111 You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to knetworkmanager in ubuntu. -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 327523] [NEW] Sony Vaio VGN-S16C Fn+F2~F4 generate duplicate events when pressed only once
Public bug reported: lsb_release -rd Description: Ubuntu 8.10 Release: 8.10 uname -a Linux s16c 2.6.27-7-generic #1 SMP Fri Oct 24 06:42:44 UTC 2008 i686 GNU/Linux When press Fn+F2, Fn+F3 or Fn+F4 once, the system will take it as twice, which can be verified with showkey -s or showkey -k, other Fn combinations don't have this problem. One of the consequences is that, when press Fn+F2 to mute, you can see the mute icon show up and then disappear immediately, which lead me to discover this bug. ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- Sony Vaio VGN-S16C Fn+F2~F4 generate duplicate events when pressed only once https://bugs.launchpad.net/bugs/327523 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327522] Re: NetworkManager crashed with SIGSEGV in nm_connection_clear_secrets()
** Attachment added: "CoreDump.gz" http://launchpadlibrarian.net/22433188/CoreDump.gz ** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/22433189/Dependencies.txt ** Attachment added: "Disassembly.txt" http://launchpadlibrarian.net/22433190/Disassembly.txt ** Attachment added: "Gconf.txt" http://launchpadlibrarian.net/22433191/Gconf.txt ** Attachment added: "IfupdownConfig.txt" http://launchpadlibrarian.net/22433192/IfupdownConfig.txt ** Attachment added: "NetDevice.eth0.txt" http://launchpadlibrarian.net/22433193/NetDevice.eth0.txt ** Attachment added: "NetDevice.lo.txt" http://launchpadlibrarian.net/22433194/NetDevice.lo.txt ** Attachment added: "NetDevice.pan0.txt" http://launchpadlibrarian.net/22433195/NetDevice.pan0.txt ** Attachment added: "NetDevice.wlan0.txt" http://launchpadlibrarian.net/22433196/NetDevice.wlan0.txt ** Attachment added: "NetDevice.wmaster0.txt" http://launchpadlibrarian.net/22433197/NetDevice.wmaster0.txt ** Attachment added: "ProcMaps.txt" http://launchpadlibrarian.net/22433198/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://launchpadlibrarian.net/22433199/ProcStatus.txt ** Attachment added: "Registers.txt" http://launchpadlibrarian.net/22433200/Registers.txt ** Attachment added: "Stacktrace.txt" http://launchpadlibrarian.net/22433201/Stacktrace.txt ** Attachment added: "Syslog.txt" http://launchpadlibrarian.net/22433202/Syslog.txt ** Attachment added: "ThreadStacktrace.txt" http://launchpadlibrarian.net/22433203/ThreadStacktrace.txt ** Attachment added: "WpaSupplicantLog.txt" http://launchpadlibrarian.net/22433204/WpaSupplicantLog.txt ** Visibility changed to: Public ** Visibility changed to: Private -- NetworkManager crashed with SIGSEGV in nm_connection_clear_secrets() https://bugs.launchpad.net/bugs/327522 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327304] Re: 2.25.90-0ubuntu1 FTBFS
This bug was fixed in the package totem - 2.25.90-0ubuntu2 --- totem (2.25.90-0ubuntu2) jaunty; urgency=low * 70_autotools.patch: - Include src/plugins/bbc/Makefile.in in the patch to fix FTBFS on all architectures (LP: #327304). -- Chris CoulsonMon, 09 Feb 2009 18:22:45 + ** Changed in: totem (Ubuntu) Status: Triaged => Fix Released -- 2.25.90-0ubuntu1 FTBFS https://bugs.launchpad.net/bugs/327304 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 115616] Re: Device-mapper errors: dm-linear, lookup failed
Just to be clear - This bug is *not* fixed. Upgrading via command line and completely breaking a working system is not very cool. System critical bugs that are open for years doesn't bother me half as much as serious bugs erroneously marked as fixed... -- Device-mapper errors: dm-linear, lookup failed https://bugs.launchpad.net/bugs/115616 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285050] Re: Improvements to search in Adept3
This post should probably be titled "Fixes for Adept search." The definition of "search" as understood by most users is that you get hits which contain your query. Any search that fails to return a package named "foo-bar" when you type "bar" isn't actually searching. What it's doing now is giving results only based on the start of the package name. This is called "sort and jump". -- Improvements to search in Adept3 https://bugs.launchpad.net/bugs/285050 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 131227] Re: notification-daemon crashed with SIGSEGV in strcmp()
It should remain as confirmed for now I think. The next step is to apply the patch to the ubuntu package and use that to create a debdiff. The debdiff should the be attached to this bug and then you subscribe ubuntu-main-sponsors or ubuntu-universe-sponsors as appropriate and request sponsorship (these guys will update it to ubuntu repo and then it will arrive as a normal update). Details on these two remaining steps is available here: https://wiki.ubuntu.com/PackagingGuide/Recipes/Debdiff https://wiki.ubuntu.com/SponsorshipProcess PS. Note that if you can get the patch applied upstream, that's great because it makes it easier to convince ubuntu sponsors that it's the "appropriate way to fix the bug" and it also makes sure that we will never hit this bug again in the future. DS. Also, for a general overview of bugfixing in ubuntu, check out this page: https://wiki.ubuntu.com/MOTU/TODO/Bugs Thanks for working on this patch Antonio, keep up the good work!! -- notification-daemon crashed with SIGSEGV in strcmp() https://bugs.launchpad.net/bugs/131227 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 326979] Re: PGP encrypted sent messages aren't showed decrypted in sent folder
If the mail is only encrypted using your recipient's public key it is only natural that he is the only one who is able to read it. After all, you don't have access to his private key, do you? :-) If you go into Evolution's Account editor and the tab Security you'll find the option "Always encrypt to myself when sending encrypted messages". That way your public key will always be used. ** Changed in: evolution (Ubuntu) Status: Incomplete => Invalid -- PGP encrypted sent messages aren't showed decrypted in sent folder https://bugs.launchpad.net/bugs/326979 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305067] Re: Cannot connect to WPA2 Enterprise network (Intrepid)
** Tags added: 0.7 enterprise intrepid peap wpa wpa-enterprise -- Cannot connect to WPA2 Enterprise network (Intrepid) https://bugs.launchpad.net/bugs/305067 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327434] Re: opening asc file reports: it's not possibile to decrypt the file
Well, when I double-click the asc fileit's supposed that nautilus launch seahorse to ask me for importing a public key as it should recognize that the asc file I saved is a public key (I have been an opensuse kde user for a long time and under this distro the things ran in this way). I think the user should never see an error message. -- opening asc file reports: it's not possibile to decrypt the file https://bugs.launchpad.net/bugs/327434 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 243901] Re: enthought tvtk failure under compiz
@Lennart: What is your video card? What is the version of Ubuntu you are using, and the version of the mayavi2 package? When you say that you get no figure, how would you describe the problem: are you getting an empty figure, or does no window pop up? Are you getting any error message? Cheers, Gaël -- enthought tvtk failure under compiz https://bugs.launchpad.net/bugs/243901 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327528] [NEW] Spell check defalting to Esperanto spelling errors while typing.
Public bug reported: Binary package hint: evolution Evolution Email Client While typing emails in English, all words are being flaged as mis- spellings. I have unticked the Esperanto several times. Only to start typing another email and the same problem. I have tinkered around in the properties to no avail. It's highly annoying... Ubuntu 8.10 intrepid ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 8.10 ExecutablePath: /usr/bin/evolution Package: evolution 2.24.3-0ubuntu1 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: evolution Uname: Linux 2.6.27-11-generic i686 ** Affects: evolution (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- Spell check defalting to Esperanto spelling errors while typing. https://bugs.launchpad.net/bugs/327528 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327528] Re: Spell check defalting to Esperanto spelling errors while typing.
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/22433493/Dependencies.txt ** Attachment added: "ProcMaps.txt" http://launchpadlibrarian.net/22433494/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://launchpadlibrarian.net/22433495/ProcStatus.txt -- Spell check defalting to Esperanto spelling errors while typing. https://bugs.launchpad.net/bugs/327528 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327512] Re: pidgin hangs on space after unbroken wrapped line
** Changed in: pidgin (Ubuntu) Status: New => Confirmed -- pidgin hangs on space after unbroken wrapped line https://bugs.launchpad.net/bugs/327512 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236275] Re: System very slow after suspend-to-ram
I can quantify the slowdown of the system after a suspend-to-RAM. I am not sure if the same result applies for a suspend-to-disk. Steps to reproduce: 1. Boot up computer 2. Run a sample program and time it. 3. Suspend to RAM 4. Wake up. 5. Run the same sample program and time it. Time taken will be about 3x more. Attached are a ps report, a lsmod report, and a report of a sample program (lame encoder in my case), both before and after the suspend-to-RAM. ** Attachment added: "document_slowdown" http://launchpadlibrarian.net/22433415/document_slowdown -- System very slow after suspend-to-ram https://bugs.launchpad.net/bugs/236275 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 236275] Re: System very slow after suspend-to-ram
I forgot to mention that I have observed the above in Ubuntu Intrepid Ibex 8.10. The above occurs both under the 2.6.27-9-generic, as well as the 2.6.27-11-generic linux kernels. -- System very slow after suspend-to-ram https://bugs.launchpad.net/bugs/236275 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327526] Re: evolution crashed with SIGSEGV in camel_mime_parser_read()
** Visibility changed to: Public -- evolution crashed with SIGSEGV in camel_mime_parser_read() https://bugs.launchpad.net/bugs/327526 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327464] Re: Please sponsor gnome-keyring 2.25.90 into jaunty
thank you for your work on the update, I will have a look to it and sponsor it today since it's blocking some other upgrades I'm working on ** Changed in: gnome-keyring (Ubuntu) Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs) Status: New => Fix Committed -- Please sponsor gnome-keyring 2.25.90 into jaunty https://bugs.launchpad.net/bugs/327464 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327464] Re: Please sponsor gnome-keyring 2.25.90 into jaunty
the diff.gz is a gcalctool one not gnome-keyring ** Changed in: gnome-keyring (Ubuntu) Status: Fix Committed => Incomplete -- Please sponsor gnome-keyring 2.25.90 into jaunty https://bugs.launchpad.net/bugs/327464 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319097] Re: [intel] polytopes screensaver freezes, requiring hard reset
You should be able to do this over the network. ssh into the computer where polytopes is running in fullscreen, and run gdb /usr/lib/xscreensaver/polytopes 2>&1 | tee gdb-polytopes.txt then attach to the running polytopes process with attach PID After attaching you can type "cont" to let it run. Then directly on the computer press the keys or whatever to reproduce the hang. gdb will detect if the process crashes, but if it goes looping, you'll have to type ctrl-C in gdb. Does this happen if you turn off locking (password checking) on the screensaver? -- [intel] polytopes screensaver freezes, requiring hard reset https://bugs.launchpad.net/bugs/319097 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 317712] Re: nepomukservicestub crashed with SIGSEGV in QThread::isRunning()
Same for me, crashes after login -- nepomukservicestub crashed with SIGSEGV in QThread::isRunning() https://bugs.launchpad.net/bugs/317712 You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to kdebase-runtime in ubuntu. -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 304871] Re: [i845G] Fatal server error: Couldn't bind memory for BO front buffer (Jaunty)
After upgrading from Ubuntu 8.10, upon restart I got after the progression bar with Ubuntu logo a black (blueish) screen for gdm (with usual sound). Ctrl+Alt+F1 seemed to do something, but with the same screen. At least Ctrl+Alt+Del would restart the system. Choosing 2.6.27 in grub didn't make a difference. After some more restarts, I was proposed failsafe on server 1 (0 beeing busy. Failsave proposed to archive the logs, which I did (attachment). This failsafe is in 1280*1024 (the screen's best)which allows me to write this normally. ** Attachment added: "Archive generated by failsave" http://launchpadlibrarian.net/22433539/failsafeX-backup-090210085536.tar -- [i845G] Fatal server error: Couldn't bind memory for BO front buffer (Jaunty) https://bugs.launchpad.net/bugs/304871 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 304871] Re: [i845G] Fatal server error: Couldn't bind memory for BO front buffer (Jaunty)
Video is Intel 945G. (Full lspci -vvnn attached) 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:817a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel modules: intelfb ** Attachment added: "lspcivvnn.txt" http://launchpadlibrarian.net/22433603/lspcivvnn.txt -- [i845G] Fatal server error: Couldn't bind memory for BO front buffer (Jaunty) https://bugs.launchpad.net/bugs/304871 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 301353] Re: HP Pavilion dv5: ATA exception on resume from suspend
LOL! I'm sorry I have no idea how to remove the message. I guess it will just have to stay there for posterity! ;) -- HP Pavilion dv5: ATA exception on resume from suspend https://bugs.launchpad.net/bugs/301353 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 300939] Re: kwin crashed with SIGSEGV
Same for me, it crashed at startup -- kwin crashed with SIGSEGV https://bugs.launchpad.net/bugs/300939 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 284211] Re: [intrepid] network-manager-gnome 0.7 missing PEAP-GTC option
** Tags added: peap wpa-enterprise -- [intrepid] network-manager-gnome 0.7 missing PEAP-GTC option https://bugs.launchpad.net/bugs/284211 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 263348] Re: Firefox crashes when attempting to print to file (PDF)
I have been doing a hell of a lot of printing to pdf files, on different Linux computers with different versions of firefox over time. I have seen this bug every time. It happens intermittently, about 1 in 10 prints on average. It doesn't occur with Konqueror. This bug still exists in firefox 3.0.5 on Ubuntu 8.10. ** Changed in: firefox (Ubuntu) Status: Invalid => Confirmed -- Firefox crashes when attempting to print to file (PDF) https://bugs.launchpad.net/bugs/263348 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327452] Re: Autocomplete doesn't work as expected in Konsole
Ah ha. Sorry about that! For future reference... what bash-completion *should* I have filed against? -- Autocomplete doesn't work as expected in Konsole https://bugs.launchpad.net/bugs/327452 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327534] [NEW] package mythtv-common 0.21.0+fixes19961-0ubuntu1 failed to install/upgrade: underproces post-installation script returnerede afslutningsstatus 1
Public bug reported: Binary package hint: mythtv trying to update ProblemType: Package Architecture: i386 DistroRelease: Ubuntu 9.04 ErrorMessage: underproces post-installation script returnerede afslutningsstatus 1 Package: mythtv-common 0.21.0+fixes19961-0ubuntu1 PackageArchitecture: all SourcePackage: mythtv Title: package mythtv-common 0.21.0+fixes19961-0ubuntu1 failed to install/upgrade: underproces post-installation script returnerede afslutningsstatus 1 Uname: Linux 2.6.28-4-generic i686 ** Affects: mythtv (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- package mythtv-common 0.21.0+fixes19961-0ubuntu1 failed to install/upgrade: underproces post-installation script returnerede afslutningsstatus 1 https://bugs.launchpad.net/bugs/327534 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327534] Re: package mythtv-common 0.21.0+fixes19961-0ubuntu1 failed to install/upgrade: underproces post-installation script returnerede afslutningsstatus 1
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/22433717/Dependencies.txt ** Attachment added: "DpkgTerminalLog.txt" http://launchpadlibrarian.net/22433718/DpkgTerminalLog.txt -- package mythtv-common 0.21.0+fixes19961-0ubuntu1 failed to install/upgrade: underproces post-installation script returnerede afslutningsstatus 1 https://bugs.launchpad.net/bugs/327534 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 325540] Re: Please sponsor totem 2.25.90-0ubuntu1 in to Jaunty
That was a packaging error on my part really though. When I ran autoconf, it generated the new file which I didn't include in the patch, but subsequently it got included in the diff.gz anyway. I should have spotted that before I submitted it ;) -- Please sponsor totem 2.25.90-0ubuntu1 in to Jaunty https://bugs.launchpad.net/bugs/325540 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 309408] Re: hot key presses get repeated twice
this bug has been fixed in current Ubuntu 9.04 ** Changed in: gnome-power-manager (Ubuntu) Status: New => Fix Released -- hot key presses get repeated twice https://bugs.launchpad.net/bugs/309408 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 264336] Re: pgsql fails to start due to shared buffer setting greater than kernel allows
I get exactly the same error with nearly the same parameters: 2009-02-07 08:34:38 CET FATAL: could not create shared memory segment: Invalid argument 2009-02-07 08:34:38 CET DETAIL: Failed system call was shmget(key=5432001, size=39288832, 03600). 2009-02-07 08:34:38 CET HINT: This error usually means that PostgreSQL's [...] But... I only get this at boot time, while postgres' automatic startup. If I do a '/etc/init.d/postgresql-8.3 start' later, it works without any error message! System: ubuntu-server 8.04.2 (x86_64), kernel 2.6.24-23-server PostgreSQL: 8.3.5-0ubuntu0.8.04 kernel.shmmax = 268435456 kernel.shmall = 2097152 kernel.shmmni = 4096 -- pgsql fails to start due to shared buffer setting greater than kernel allows https://bugs.launchpad.net/bugs/264336 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 263348] Re: Firefox crashes when attempting to print to file (PDF)
please check this bug. Its a bit harder to reproduce than what was already tried. Its a damn nuisance because it leads to potentially irreversible data loss in some cases, eg: pages that can only be accessed once, transaction receipts, etc... ** Changed in: firefox (Ubuntu) Assignee: (unassigned) => Mark Shuttleworth (sabdfl) -- Firefox crashes when attempting to print to file (PDF) https://bugs.launchpad.net/bugs/263348 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 224460] Re: apt-cache shows misleading dependency information
seb128: the apt-cache one is probably for apt 0.8 (where some breakage of the output format is ok) unsubscribing the sponsor team for now -- apt-cache shows misleading dependency information https://bugs.launchpad.net/bugs/224460 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 327452] Re: Autocomplete doesn't work as expected in Konsole
On Tue, 10 Feb 2009 08:38:56 -, C. Cooke wrote: > Ah ha. Sorry about that! > > For future reference... what bash-completion *should* I have filed > against? Maybe the package? ;) This is a user-problem, not code-related. He probably didn't source /etc/bash_completion -- that's why I asked to write the value of those two environment variables ;) But, well, don't worry :) -- users come first. Ciao, David -- . ''`. Debian maintainer | http://wiki.debian.org/DavidPaleino : :' : Linuxer #334216 --|-- http://www.hanskalabs.net/ `. `'` GPG: 1392B174 | http://snipr.com/qa_page `- 2BAB C625 4E66 E7B8 450A C3E1 E6AA 9017 1392 B174 -- Autocomplete doesn't work as expected in Konsole https://bugs.launchpad.net/bugs/327452 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 324020] Re: [Jaunty Regression] FUSA no longer changes Pidgin's status
I'm looking at some other FUSA bugs, so I'll take a look at this one too. It should be trivial to fix ** Changed in: fast-user-switch-applet (Ubuntu) Assignee: (unassigned) => Chris Coulson (chrisccoulson) Status: Triaged => In Progress -- [Jaunty Regression] FUSA no longer changes Pidgin's status https://bugs.launchpad.net/bugs/324020 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 327449] Re: New upstream release available: Gwyddion 2.13
Hi Joseph, I'm the guy who takes care of gwyddion in Debian. I finished packaging 2.13-1 yesterday evening, it's sitting in Debian-Med's SVN and waiting for a sponsor. This version is going to feature gwyddion's Python scripting interface pygwy, finally. On 02/10/2009 02:53 AM, Joseph Smidt wrote : > This package builds just fine for jaunty on all architectures. I have > built this package for Jaunty in my ppa: > https://launchpad.net/~jsmidt/+archive/ppa. You can check out the > source > https://launchpad.net/%7Ejsmidt/+archive/ppa/+files/gwyddion_2.13-0ubuntu1.dsc. Great, that you spent some time on this yourself! If you had to change something in the packaging compared to the current version or if you generally have some remarks/improvements, please do not hesitate to mail me or open a bug (either Launchpad or Debian BTS - as you like)! I will probably take a look at your packaging soon - maybe I can learn something from it. ;-) Best Regards, Jan -- New upstream release available: Gwyddion 2.13 https://bugs.launchpad.net/bugs/327449 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 320908] Re: [Jaunty] - You can't change your pidgin status via Fast user switcher applet
*** This bug is a duplicate of bug 324020 *** https://bugs.launchpad.net/bugs/324020 Thank you for your bug report. This bug has already been reported, but please feel free to report any other bugs you find. ** Changed in: fast-user-switch-applet (Ubuntu) Status: Confirmed => Invalid ** This bug has been marked a duplicate of bug 324020 [Jaunty Regression] FUSA no longer changes Pidgin's status -- [Jaunty] - You can't change your pidgin status via Fast user switcher applet https://bugs.launchpad.net/bugs/320908 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 320027] Re: Incorrect CPU speed on 2G Surf
komputes: Can you confirm that cat /proc/cpuinfo on a stock Xandros install on a 70x reports 900 Mhz after the model name of a stock Xandros install? If so I was most definitely mistaken in my comment above but it seems unusual to me that they wouldn't simply default it to the faster speed in the BIOS... As for a cpu scaling interface, there was talk about adding one for the 90x series and there were patches on the LKML list too http://groups.google.com/group/fa.linux.kernel/browse_frm/thread/ef73483027f10c3b/137adbac167c1202?#137adbac167c1202 . Now I reread the thread there is speculation that it might work on 701s with later BIOSes but nothing conclusive. Just for the record, which BIOS version are you using? Having a slower clock speed won't completely stop people installing Ubuntu on slower eees though, so I don't think that is a fair argument. Your other points appear to be bang on though. -- Incorrect CPU speed on 2G Surf https://bugs.launchpad.net/bugs/320027 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327136] Re: mencoder is uninstallable
** Description changed: - Binary package hint: mplayer + Binary package hint: mencoder I seguenti pacchetti hanno dipendenze non soddisfatte: mencoder: Dipende: libx264-59 (>= 1:0.svn20080408) ma non è installabile E: Pacchetto non integro It's due to the Build-Depends on libx64-dev, a no-change rebuild should be the solution. -- mencoder is uninstallable https://bugs.launchpad.net/bugs/327136 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 303083] Re: Thinkpad W500 suspend does not resume with 8.10
I can confirm the suspend/resume problem on ThinkPad W500 using 8.10 Intrepid Ibex. The system successfully suspends (to disk and to RAM), but resume does not work. On resume, the display always remains dark. Usually, the system seems to hang in this case, but sometimes it still accepts keyboard input and allows for shutdown. The only way I found to avoid these problems is to turn off compiz. Without compiz, suspend/resume work. -- Thinkpad W500 suspend does not resume with 8.10 https://bugs.launchpad.net/bugs/303083 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 298811] Re: FUSA is missing "Hibernate", "Suspend", "Shut-down" and "Restart" entries
I'm looking at some other bug fixes for the FUSA applet, and this will be fixed as a side-effect of the changes I'm making (if accepted) ** Changed in: fast-user-switch-applet (Ubuntu) Importance: Undecided => Low Status: Confirmed => In Progress -- FUSA is missing "Hibernate", "Suspend", "Shut-down" and "Restart" entries https://bugs.launchpad.net/bugs/298811 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 298296] Re: Typo in Message window
Thanks, commited to my bzr branch \o/ -- Typo in Message window https://bugs.launchpad.net/bugs/298296 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 289982] Re: PS3: NetworkManager cannot connect to WPA/WPA2 wireless networks
My PS3 won't boot any more with the 2.6.28 RC8 Kernel :( Fresh install of Intrepid, custom Kernel+Headers installed with "dpkg -i". After reboot I get some kernel error messages (sorry, cannot provide exact error atm). -- PS3: NetworkManager cannot connect to WPA/WPA2 wireless networks https://bugs.launchpad.net/bugs/289982 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 326979] Re: PGP encrypted sent messages aren't showed decrypted in sent folder
Andreas, I have been a kmail user for a long time and with this app if you sent an encrypted email to a user and then you want to read it from the sent mail folder you can do this and I think it's a logical thing as it's I that wrote the email and it's not important if I haven't the private key (obviously) of the recipient user. If you encrypt all the email that you send you are in the situation that you cannot read them anymore, but it's absurd as it's you that wrote them. ** Changed in: evolution (Ubuntu) Status: Invalid => New -- PGP encrypted sent messages aren't showed decrypted in sent folder https://bugs.launchpad.net/bugs/326979 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 326979] Re: PGP encrypted sent messages aren't showed decrypted in sent folder
I add a particular to you: in kde you can read it, from sent mail forlder, the encrypted emails after having typed your own keyring secret key (and I think this behavior it's right). -- PGP encrypted sent messages aren't showed decrypted in sent folder https://bugs.launchpad.net/bugs/326979 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 306066] Re: Ubuntu 8.10 cannot mount a 16Gb SDHC that works fine on Ubuntu-eee 8.04.1
Andrea: I'm sorry to hear that (I found the confusion around not being able to read bigger SD cards highly annoying as there seem to be few warnings). As for how do you close this particular bug: At the top of the page there is a table with the word Status in it and below there is the word New. Click on the word New and a new area should appear beneath the table. In the new area there should be the word Status again with a dropdown that is currently on New. Change the dropdown value to Invalid and click the Save Changes button not far below it. I hope this helps. -- Ubuntu 8.10 cannot mount a 16Gb SDHC that works fine on Ubuntu-eee 8.04.1 https://bugs.launchpad.net/bugs/306066 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327222] Re: Simple stunnel DOS when opening and closing connections
It seems that this package/version is the standard with ubuntu-hardy. I found that there is already a new package in the pool/universe (http://archive.ubuntu.com/ubuntu/pool/universe/s/stunnel4/stunnel4_4.22-2_i386.deb) which seems to be working on hardy without problems. I'll try to stop it using the scripts above. If stunnel4 keeps functional, is it possible to update the package lists, so that this package is included in hardy? -- Simple stunnel DOS when opening and closing connections https://bugs.launchpad.net/bugs/327222 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327536] [NEW] GoogleEarth display flickering when compiz is enabled
Public bug reported: I use 64-bit Ubuntu 8.10 on a ThinkPad W500 with fglrx. When compiz is enabled, the display of GoogleEarth is flickering. In particular, flickering occurs when some content in other windows on the screen is updated. Turning off compiz, the problem is gone. The flickering problem may be related to the compiz/ThinkPad W500 suspend/resume problem described in bug #303083: https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/303083 ** Affects: ubuntu Importance: Undecided Status: New -- GoogleEarth display flickering when compiz is enabled https://bugs.launchpad.net/bugs/327536 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 263441] Re: kompozer crashes in intrepid when opening the recent files menu
I'm not doing the hard way, only the standard way, wich works fine before. When others updates as QT or GTK affects Kompozer, it would be better to recheck it before updates are public. For beta users (no gurus!), this means that your preferred tool will suddenly work hazardeous. And when you have lot to do, it's a little bit harder to restart with a simple editor. Thanks for all your info. It works fine now. Regards, Denis Toby a écrit : > Why are you doing it the hard way? Kompozer under Ubuntu 8.10 is working > llike a charm now! Just use the present alpha. It came out today (February > 6th 2009) and works perfectly for me. You can either follow the step by step > instructions with pictures on > http://nyuviu.wordpress.com/2008/12/10/howto-problemlos-und-leicht-webseiten-erstellen-wyswyg-mit-ubuntu-804-810-und-kompozer-installation-auf-pc-oder-usb-stick > (It's in German: use http://www.google.com/language_tools to easily > translate it by drag and drop) > or you download the alpha here: > http://downloads.sourceforge.net/kompozer/kompozer-20090206.tar.gz > Download it to wherever you want on your computer and unpack it there. This > creates a folder named kompozer. Open it and you find another small picture > named 'kompozer' in it. Doubleclick on it and choose execute. You are done! > Kompozer starts and you can work with it. NO INSTALLATION NEEDED! If you want > to easily create an Icon as starter and things like that which make working > smooth, you find instructions in the above mentioned HowTo. > If you want to deinstall Kompozer again, just delete the kompozer folder and > the hidden .kompozer folder (To see hidden folders, open your > home/your-name-folder and press Strg +H together and you see them all. Search > for .kompozer and put it in the bin. That's it.) > Thanks Kaze for his great work! > > -- kompozer crashes in intrepid when opening the recent files menu https://bugs.launchpad.net/bugs/263441 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327503] Re: evolution lost all the POP mail settings, contacts, memos
thank you for your bug report, those settings are stored in gconf, did you have disk corruption issues? do you get configuration issues in other softwares? ** Changed in: evolution (Ubuntu) Importance: Undecided => Medium Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs) Status: New => Incomplete -- evolution lost all the POP mail settings, contacts, memos https://bugs.launchpad.net/bugs/327503 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327065] Re: Crash when importing mbox
there is no option right now to add apport informations to an open bug but that's going to be fixed in jaunty, the usual way is to open a new bug and close the non apport one as duplicate, in this case if there is enough details no need to do that -- Crash when importing mbox https://bugs.launchpad.net/bugs/327065 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 313354] Re: [need-update] GIMP to 2.6.4 in Jaunty and backport it to intrepid.
It just didn't get built for all architectures yet, but the source package is available. As of today, packages for i386 are in the archive as well. -- [need-update] GIMP to 2.6.4 in Jaunty and backport it to intrepid. https://bugs.launchpad.net/bugs/313354 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 306066] Re: Ubuntu 8.10 cannot mount a 16Gb SDHC that works fine on Ubuntu-eee 8.04.1
I've discovered it's a problem with my card reader, it cannot read SDHC memories. ** Changed in: linux (Ubuntu) Status: New => Invalid -- Ubuntu 8.10 cannot mount a 16Gb SDHC that works fine on Ubuntu-eee 8.04.1 https://bugs.launchpad.net/bugs/306066 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222999] Re: package boxbackup-server 0.10+really0.10-1ubuntu3 failed to install/upgrade:
I can confirm that this bug is still present in 8.10, see the output from apt-get install boxbackup-server ja...@sp13k:~$ sudo apt-get install boxbackup-server Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: boxbackup-server 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/560kB of archives. After this operation, 1602kB of additional disk space will be used. Preconfiguring packages ... Selecting previously deselected package boxbackup-server. (Reading database ... 138608 files and directories currently installed.) Unpacking boxbackup-server (from .../boxbackup-server_0.11~rc2-3.1_i386.deb) ... Processing triggers for man-db ... Setting up boxbackup-server (0.11~rc2-3.1) ... Creating bbstored user. Adding system user `bbstored' (UID 113) ... Adding new group `bbstored' (GID 126) ... Adding new user `bbstored' (UID 113) with group `bbstored' ... Not creating home directory `/var'. [: 208: -z: unexpected operator Generating RSA private key, 2048 bit long modulus ..+++ ...+++ e is 65537 (0x10001) You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. - Country Name (2 letter code) [AU]:State or Province Name (full name) [Some-State]:Locality Name (eg, city) []:Organization Name (eg, company) [Internet Widgits Pty Ltd]:Organizational Unit Name (eg, section) []:Common Name (eg, YOUR name) []:Email Address []: Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []:An optional company name []:. /usr/share/debconf/confmodule: line 55: return: .: numeric argument required dpkg: error processing boxbackup-server (--configure): subprocess post-installation script returned error exit status 255 Errors were encountered while processing: boxbackup-server E: Sub-process /usr/bin/dpkg returned an error code (1) ja...@sp13k:~$ -- package boxbackup-server 0.10+really0.10-1ubuntu3 failed to install/upgrade: https://bugs.launchpad.net/bugs/222999 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 185771] Re: video output aalib only displays the left hand side of the video
This is should be done by using sub option "monitorpixelaspect 0.5" e.g mplayer -vo aa -monitorpixelaspect 0.5 foo.ogg -- video output aalib only displays the left hand side of the video https://bugs.launchpad.net/bugs/185771 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 243550] Re: gdebi --root doesn't use the apt config from the chroot but the one from the "host"
This bug was fixed in the package python-apt - 0.7.9~exp2ubuntu7 --- python-apt (0.7.9~exp2ubuntu7) jaunty; urgency=low * apt/package.py: - add "not_automatic" flag to the origin * debian/control: - rebuild against latest apt * apt/cache.py: - when setting a alternative rootdir, read the config from it as well (LP: #243550) * python/configuration.cc, python/apt_pkgmodule.cc: - add apt_pkg.ReadConfigDir() -- Michael VogtMon, 09 Feb 2009 15:09:17 +0100 ** Changed in: python-apt (Ubuntu) Status: Triaged => Fix Released -- gdebi --root doesn't use the apt config from the chroot but the one from the "host" https://bugs.launchpad.net/bugs/243550 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 151323] Re: screenshot dual
** Bug watch added: Novell/SUSE Bugzilla #381135 https://bugzilla.novell.com/show_bug.cgi?id=381135 ** Also affects: gnome-utils (openSUSE) via https://bugzilla.novell.com/show_bug.cgi?id=381135 Importance: Unknown Status: Unknown -- screenshot dual https://bugs.launchpad.net/bugs/151323 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 151323] Re: screenshot dual
** Changed in: gnome-utils (openSUSE) Status: Unknown => In Progress -- screenshot dual https://bugs.launchpad.net/bugs/151323 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 225998] Re: Screenshot shows transparency instead of other monitor
*** This bug is a duplicate of bug 151323 *** https://bugs.launchpad.net/bugs/151323 ** This bug has been marked a duplicate of bug 151323 screenshot dual -- Screenshot shows transparency instead of other monitor https://bugs.launchpad.net/bugs/225998 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327483] Re: Totem crashes with Compiz turned on
Thank you for taking the time to report this bug and helping to make Ubuntu better. Please try to obtain a backtrace following the instructions at http://wiki.ubuntu.com/DebuggingProgramCrash and upload the backtrace (as an attachment) to the bug report. This will greatly help us in tracking down your problem. Could you also give details on the ubuntu version, video card and drive you are using? ** Changed in: totem (Ubuntu) Importance: Undecided => Medium Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs) Status: New => Incomplete -- Totem crashes with Compiz turned on https://bugs.launchpad.net/bugs/327483 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327538] [NEW] brightness keys don't work anymore on HP Pavilion dv3550 EL
Public bug reported: Hi, I'm using Ubuntu 8.10 on HP Pavilion dv3550el The live disk version handles brightness keys correctly. after a couple of recent updates, they don't work anymore. When the brightness keys are pressed, the brightness icon appears on the screen and the brightness level bar moves, but luminosity does not actually change. Note that all other keys work well (volume, display switch, wifi kill switch, and even multimedia: start/stop, rew, ffwd) Should it be an ACPI problem, here are the related versions: acpid: 1.0.6-9ubuntu4 acpi: 1.1-lubuntu1 acpi-support 0.114-0intrepid2 Here is the output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 9300M GS (rev a1) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection ** Affects: ubuntu Importance: Undecided Status: New -- brightness keys don't work anymore on HP Pavilion dv3550 EL https://bugs.launchpad.net/bugs/327538 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327475] Re: Internal data flow error
Thank you for taking the time to report this bug and helping to make Ubuntu better. Please answer these questions: * Is this reproducible? * If so, what specific steps should we take to recreate this bug? * Could you give an url to trigger the issue? This will help us to find and resolve the problem. ** Changed in: totem (Ubuntu) Importance: Undecided => Low Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs) Status: New => Incomplete -- Internal data flow error https://bugs.launchpad.net/bugs/327475 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 326205] Re: Gnome login sound has glitches
I've been having glitches not only with the login sound, but with ogg123 (default settings) as well. Guess it had something to do with PulseAudio's ALSA emulation, because switching ogg123 to ALSA device hw:0,0 got rid of the glitches. The "load-module module-hal-detect tsched=0" line fixed the login sound and ogg123 as well. Thanks for the tip! -- Gnome login sound has glitches https://bugs.launchpad.net/bugs/326205 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 322955] Re: package libgtk2.0-bin 2.14.4-0ubuntu2 failed to install/upgrade: package libgtk2.0-bin is already installed and configured
*** This bug is a duplicate of bug 323073 *** https://bugs.launchpad.net/bugs/323073 This bug was fixed in the package apt - 0.7.20.2ubuntu1 --- apt (0.7.20.2ubuntu1) jaunty; urgency=low [ Christian Perrier ] * Translations: - bg.po. Closes: #513211 - zh_TW.po. Closes: #513311 - nb.po. Closes: #513843 [ Michael Vogt ] * merged from the debian-sid branch * [ABI break] merge support for http redirects, thanks to Jeff Licquia and Anthony Towns * [ABI break] use int for the package IDs (thanks to Steve Cotton) * apt-pkg/contrib/strutl.cc: - fix TimeToStr i18n (LP: #289807) * debian/apt.conf.autoremove: - readd "linux-image" (and friends) to the auto-remove blacklist * fix some i18n issues (thanks to Gabor Kelemen) LP: #263089 * apt-pkg/deb/dpkgpm.cc: - filter "ENOMEM" errors when creating apport reports * cmdline/apt-get.cc: - fix "apt-get source pkg=ver" if binary name != source name (LP: #202219) * apt-pkg/indexrecords.cc: - fix some i18n issues * apt-pkg/contrib/strutl.h: - add new strprintf() function to make i18n strings easier * apt-pkg/dev/debsystem.cc: - add missing apti18n.h header * cmdline/apt-get.cc: - default to "false" for the "APT::Get::Build-Dep-Automatic" option (follow debian here) * apt-pkg/pkgcache.cc: - do not run "dpkg --configure pkg" if pkg is in trigger-awaited state (LP: #322955) * methods/https.cc: - add Acquire::https::AllowRedirect support - do not unlink files in partial/ (thanks to robbiew) [ Dereck Wonnacott ] * Clarify the --help for 'purge' (LP: #243948) [ Ian Weisser ] * /apt-pkg/deb/debsystem.cc: - add 'sudo' to the error message to "run 'dpkg --configure -a'" (LP: #52697) -- Michael VogtMon, 09 Feb 2009 14:21:05 +0100 ** Changed in: apt (Ubuntu Jaunty) Status: Triaged => Fix Released -- package libgtk2.0-bin 2.14.4-0ubuntu2 failed to install/upgrade: package libgtk2.0-bin is already installed and configured https://bugs.launchpad.net/bugs/322955 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 297431] Re: impossible to override Application menus
ubuntu is an opensource project and the bug work is mostly done by contributors there is apparently nobody around who has knowledge about the gnome-menus code that's why such changes should rather go upstream directly, thank you for sending the bug to GNOME now -- impossible to override Application menus https://bugs.launchpad.net/bugs/297431 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 297431] Re: impossible to override Application menus
upstream has been quick to reply and to point that the behaviour is not a bug ** Changed in: gnome-menus (Ubuntu) Status: Triaged => Invalid ** Bug watch added: GNOME Bug Tracker #557443 http://bugzilla.gnome.org/show_bug.cgi?id=557443 ** Also affects: gnome-menus via http://bugzilla.gnome.org/show_bug.cgi?id=557443 Importance: Unknown Status: Unknown -- impossible to override Application menus https://bugs.launchpad.net/bugs/297431 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 263089] Re: Please translate "dpkg was interrupted, you must manually run 'dpkg --configure -a'" message
This bug was fixed in the package apt - 0.7.20.2ubuntu1 --- apt (0.7.20.2ubuntu1) jaunty; urgency=low [ Christian Perrier ] * Translations: - bg.po. Closes: #513211 - zh_TW.po. Closes: #513311 - nb.po. Closes: #513843 [ Michael Vogt ] * merged from the debian-sid branch * [ABI break] merge support for http redirects, thanks to Jeff Licquia and Anthony Towns * [ABI break] use int for the package IDs (thanks to Steve Cotton) * apt-pkg/contrib/strutl.cc: - fix TimeToStr i18n (LP: #289807) * debian/apt.conf.autoremove: - readd "linux-image" (and friends) to the auto-remove blacklist * fix some i18n issues (thanks to Gabor Kelemen) LP: #263089 * apt-pkg/deb/dpkgpm.cc: - filter "ENOMEM" errors when creating apport reports * cmdline/apt-get.cc: - fix "apt-get source pkg=ver" if binary name != source name (LP: #202219) * apt-pkg/indexrecords.cc: - fix some i18n issues * apt-pkg/contrib/strutl.h: - add new strprintf() function to make i18n strings easier * apt-pkg/dev/debsystem.cc: - add missing apti18n.h header * cmdline/apt-get.cc: - default to "false" for the "APT::Get::Build-Dep-Automatic" option (follow debian here) * apt-pkg/pkgcache.cc: - do not run "dpkg --configure pkg" if pkg is in trigger-awaited state (LP: #322955) * methods/https.cc: - add Acquire::https::AllowRedirect support - do not unlink files in partial/ (thanks to robbiew) [ Dereck Wonnacott ] * Clarify the --help for 'purge' (LP: #243948) [ Ian Weisser ] * /apt-pkg/deb/debsystem.cc: - add 'sudo' to the error message to "run 'dpkg --configure -a'" (LP: #52697) -- Michael VogtMon, 09 Feb 2009 14:21:05 +0100 ** Changed in: apt (Ubuntu) Status: Fix Committed => Fix Released -- Please translate "dpkg was interrupted, you must manually run 'dpkg --configure -a'" message https://bugs.launchpad.net/bugs/263089 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 202219] Re: apt-get source package=version fails if binary name != source name
This bug was fixed in the package apt - 0.7.20.2ubuntu1 --- apt (0.7.20.2ubuntu1) jaunty; urgency=low [ Christian Perrier ] * Translations: - bg.po. Closes: #513211 - zh_TW.po. Closes: #513311 - nb.po. Closes: #513843 [ Michael Vogt ] * merged from the debian-sid branch * [ABI break] merge support for http redirects, thanks to Jeff Licquia and Anthony Towns * [ABI break] use int for the package IDs (thanks to Steve Cotton) * apt-pkg/contrib/strutl.cc: - fix TimeToStr i18n (LP: #289807) * debian/apt.conf.autoremove: - readd "linux-image" (and friends) to the auto-remove blacklist * fix some i18n issues (thanks to Gabor Kelemen) LP: #263089 * apt-pkg/deb/dpkgpm.cc: - filter "ENOMEM" errors when creating apport reports * cmdline/apt-get.cc: - fix "apt-get source pkg=ver" if binary name != source name (LP: #202219) * apt-pkg/indexrecords.cc: - fix some i18n issues * apt-pkg/contrib/strutl.h: - add new strprintf() function to make i18n strings easier * apt-pkg/dev/debsystem.cc: - add missing apti18n.h header * cmdline/apt-get.cc: - default to "false" for the "APT::Get::Build-Dep-Automatic" option (follow debian here) * apt-pkg/pkgcache.cc: - do not run "dpkg --configure pkg" if pkg is in trigger-awaited state (LP: #322955) * methods/https.cc: - add Acquire::https::AllowRedirect support - do not unlink files in partial/ (thanks to robbiew) [ Dereck Wonnacott ] * Clarify the --help for 'purge' (LP: #243948) [ Ian Weisser ] * /apt-pkg/deb/debsystem.cc: - add 'sudo' to the error message to "run 'dpkg --configure -a'" (LP: #52697) -- Michael VogtMon, 09 Feb 2009 14:21:05 +0100 ** Changed in: apt (Ubuntu) Status: Confirmed => Fix Released -- apt-get source package=version fails if binary name != source name https://bugs.launchpad.net/bugs/202219 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 52697] Re: apt-get tells me to run "dpkg", but the correct command is "sudo dpkg"
This bug was fixed in the package apt - 0.7.20.2ubuntu1 --- apt (0.7.20.2ubuntu1) jaunty; urgency=low [ Christian Perrier ] * Translations: - bg.po. Closes: #513211 - zh_TW.po. Closes: #513311 - nb.po. Closes: #513843 [ Michael Vogt ] * merged from the debian-sid branch * [ABI break] merge support for http redirects, thanks to Jeff Licquia and Anthony Towns * [ABI break] use int for the package IDs (thanks to Steve Cotton) * apt-pkg/contrib/strutl.cc: - fix TimeToStr i18n (LP: #289807) * debian/apt.conf.autoremove: - readd "linux-image" (and friends) to the auto-remove blacklist * fix some i18n issues (thanks to Gabor Kelemen) LP: #263089 * apt-pkg/deb/dpkgpm.cc: - filter "ENOMEM" errors when creating apport reports * cmdline/apt-get.cc: - fix "apt-get source pkg=ver" if binary name != source name (LP: #202219) * apt-pkg/indexrecords.cc: - fix some i18n issues * apt-pkg/contrib/strutl.h: - add new strprintf() function to make i18n strings easier * apt-pkg/dev/debsystem.cc: - add missing apti18n.h header * cmdline/apt-get.cc: - default to "false" for the "APT::Get::Build-Dep-Automatic" option (follow debian here) * apt-pkg/pkgcache.cc: - do not run "dpkg --configure pkg" if pkg is in trigger-awaited state (LP: #322955) * methods/https.cc: - add Acquire::https::AllowRedirect support - do not unlink files in partial/ (thanks to robbiew) [ Dereck Wonnacott ] * Clarify the --help for 'purge' (LP: #243948) [ Ian Weisser ] * /apt-pkg/deb/debsystem.cc: - add 'sudo' to the error message to "run 'dpkg --configure -a'" (LP: #52697) -- Michael VogtMon, 09 Feb 2009 14:21:05 +0100 ** Changed in: apt (Ubuntu) Status: Fix Committed => Fix Released -- apt-get tells me to run "dpkg", but the correct command is "sudo dpkg" https://bugs.launchpad.net/bugs/52697 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 243948] Re: Documentation for apt-get "purge" is sort of hard to understand
This bug was fixed in the package apt - 0.7.20.2ubuntu1 --- apt (0.7.20.2ubuntu1) jaunty; urgency=low [ Christian Perrier ] * Translations: - bg.po. Closes: #513211 - zh_TW.po. Closes: #513311 - nb.po. Closes: #513843 [ Michael Vogt ] * merged from the debian-sid branch * [ABI break] merge support for http redirects, thanks to Jeff Licquia and Anthony Towns * [ABI break] use int for the package IDs (thanks to Steve Cotton) * apt-pkg/contrib/strutl.cc: - fix TimeToStr i18n (LP: #289807) * debian/apt.conf.autoremove: - readd "linux-image" (and friends) to the auto-remove blacklist * fix some i18n issues (thanks to Gabor Kelemen) LP: #263089 * apt-pkg/deb/dpkgpm.cc: - filter "ENOMEM" errors when creating apport reports * cmdline/apt-get.cc: - fix "apt-get source pkg=ver" if binary name != source name (LP: #202219) * apt-pkg/indexrecords.cc: - fix some i18n issues * apt-pkg/contrib/strutl.h: - add new strprintf() function to make i18n strings easier * apt-pkg/dev/debsystem.cc: - add missing apti18n.h header * cmdline/apt-get.cc: - default to "false" for the "APT::Get::Build-Dep-Automatic" option (follow debian here) * apt-pkg/pkgcache.cc: - do not run "dpkg --configure pkg" if pkg is in trigger-awaited state (LP: #322955) * methods/https.cc: - add Acquire::https::AllowRedirect support - do not unlink files in partial/ (thanks to robbiew) [ Dereck Wonnacott ] * Clarify the --help for 'purge' (LP: #243948) [ Ian Weisser ] * /apt-pkg/deb/debsystem.cc: - add 'sudo' to the error message to "run 'dpkg --configure -a'" (LP: #52697) -- Michael VogtMon, 09 Feb 2009 14:21:05 +0100 ** Changed in: apt (Ubuntu) Status: Fix Committed => Fix Released -- Documentation for apt-get "purge" is sort of hard to understand https://bugs.launchpad.net/bugs/243948 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 289807] Re: Remaining time not translatable
This bug was fixed in the package apt - 0.7.20.2ubuntu1 --- apt (0.7.20.2ubuntu1) jaunty; urgency=low [ Christian Perrier ] * Translations: - bg.po. Closes: #513211 - zh_TW.po. Closes: #513311 - nb.po. Closes: #513843 [ Michael Vogt ] * merged from the debian-sid branch * [ABI break] merge support for http redirects, thanks to Jeff Licquia and Anthony Towns * [ABI break] use int for the package IDs (thanks to Steve Cotton) * apt-pkg/contrib/strutl.cc: - fix TimeToStr i18n (LP: #289807) * debian/apt.conf.autoremove: - readd "linux-image" (and friends) to the auto-remove blacklist * fix some i18n issues (thanks to Gabor Kelemen) LP: #263089 * apt-pkg/deb/dpkgpm.cc: - filter "ENOMEM" errors when creating apport reports * cmdline/apt-get.cc: - fix "apt-get source pkg=ver" if binary name != source name (LP: #202219) * apt-pkg/indexrecords.cc: - fix some i18n issues * apt-pkg/contrib/strutl.h: - add new strprintf() function to make i18n strings easier * apt-pkg/dev/debsystem.cc: - add missing apti18n.h header * cmdline/apt-get.cc: - default to "false" for the "APT::Get::Build-Dep-Automatic" option (follow debian here) * apt-pkg/pkgcache.cc: - do not run "dpkg --configure pkg" if pkg is in trigger-awaited state (LP: #322955) * methods/https.cc: - add Acquire::https::AllowRedirect support - do not unlink files in partial/ (thanks to robbiew) [ Dereck Wonnacott ] * Clarify the --help for 'purge' (LP: #243948) [ Ian Weisser ] * /apt-pkg/deb/debsystem.cc: - add 'sudo' to the error message to "run 'dpkg --configure -a'" (LP: #52697) -- Michael VogtMon, 09 Feb 2009 14:21:05 +0100 ** Changed in: apt (Ubuntu) Status: Fix Committed => Fix Released -- Remaining time not translatable https://bugs.launchpad.net/bugs/289807 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 118843] Re: scanimage does not scan image with CanoScan FB630U
I've got exactly the same problem under intrepid 32bit. In fact, I've never got this scanner to work 100% reliably under linux. When I get the above error, I have to disconnect/reconnect the scanner and try again. After some times it works (sometimes setting the debug options works too, but that shouldn't be related). -- scanimage does not scan image with CanoScan FB630U https://bugs.launchpad.net/bugs/118843 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 263262] Re: Rhythmbox doesn't properly pick up track numbers on wma files
the log shows that the issue is not a rhythmbox one, either a gstreamer bug or those files are not correctly tagged -- Rhythmbox doesn't properly pick up track numbers on wma files https://bugs.launchpad.net/bugs/263262 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 323077] Re: [Intrepid] Unreadable font with dual screen on a macbook
"xrandr --verbose" on its own should give more output. Please attach the output both from when it is fine and when it is bad. -- [Intrepid] Unreadable font with dual screen on a macbook https://bugs.launchpad.net/bugs/323077 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327326] Re: parse_ini_file wrong return value on failure
I'm using 8.10 with arch amd64 but if necessary I can test it with x86 too. Thanks for taking the time. -- parse_ini_file wrong return value on failure https://bugs.launchpad.net/bugs/327326 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327464] Re: Please sponsor gnome-keyring 2.25.90 into jaunty
P. Sorry for that... it was clearly too late... ** Attachment added: "gnome-keyring_2.25.90-0ubuntu1.diff.gz" http://launchpadlibrarian.net/22434925/gnome-keyring_2.25.90-0ubuntu1.diff.gz -- Please sponsor gnome-keyring 2.25.90 into jaunty https://bugs.launchpad.net/bugs/327464 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319725] Re: [Studio XPS 13, Inspiron 531, Studio 16] gnome-settings-daemon crash
Thank you for taking the time to report this bug and helping to make Ubuntu better. Please try to obtain a backtrace following the instructions at http://wiki.ubuntu.com/DebuggingProgramCrash and upload the backtrace (as an attachment) to the bug report. This will greatly help us in tracking down your problem. ** Changed in: gnome-control-center (Ubuntu) Importance: Undecided => Medium Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs) Status: New => Incomplete -- [Studio XPS 13, Inspiron 531, Studio 16] gnome-settings-daemon crash https://bugs.launchpad.net/bugs/319725 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327449] Re: New upstream release available: Gwyddion 2.13
Thanks for your effort Jan. Please notify here with a note when 2.13 is available on Debian sid in a final form, so that it can be sync. Thank you both for your hard work. -- New upstream release available: Gwyddion 2.13 https://bugs.launchpad.net/bugs/327449 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 318651] Re: Live CD Freezes while starting x.org - K8M890CE chipset
I think this bug is duplicate of the: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-openchrome/+bug/274340 The fix for Intrepid is not released, and I don't know if in alpha 4 of Jaunty release is package: xserver-xorg-video-openchrome (1:0.2.903+svn713-1) which solve freeze bug. I think the bug with default screen resolution is 1280*1024 which causes a lot of flickering, is a Vesa bug: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-vesa -- Live CD Freezes while starting x.org - K8M890CE chipset https://bugs.launchpad.net/bugs/318651 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 324110] Re: Please update metacity to 2.25.144-0ubuntu1
Thanks for the additional diff. My ideal workflow with bzr is that you publish your branch to e.g. lp:~chriscoulson/metacity/ubuntu and I just merge from it :) I manually diffed it and applied the diff to the main branch now so for this one we are fine. I hope the bzr workflow is not too cumbersome for you (I like it, but not everyone does). Please let me know if I can help you in any way with bzr. ** Changed in: metacity (Ubuntu) Assignee: (unassigned) => Michael Vogt (mvo) Status: Confirmed => In Progress -- Please update metacity to 2.25.144-0ubuntu1 https://bugs.launchpad.net/bugs/324110 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 324110] Re: Please update metacity to 2.25.144-0ubuntu1
This bug was fixed in the package metacity - 1:2.25.144-0ubuntu1 --- metacity (1:2.25.144-0ubuntu1) jaunty; urgency=low * New upstream version (LP: #324110): - Optimise the window property lookup. - Several memory leaks fixed. - Fix longstanding crasher about colormaps. - Alt+middle/right buttons can be switched. * 99_ltmain_as-needed.patch: - New version update. -- Chris CoulsonSun, 01 Feb 2009 22:05:17 + ** Changed in: metacity (Ubuntu) Status: In Progress => Fix Released -- Please update metacity to 2.25.144-0ubuntu1 https://bugs.launchpad.net/bugs/324110 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 263348] Re: Firefox crashes when attempting to print to file (PDF)
@dino - did you really think that assigning a bug to me would help get it resolved? Please don't do that again. I would encourage you to read https://wiki.ubuntu.com/Bugs/HowToTriage if you'd like to make a real difference on this bug and on free software in general. ** Changed in: firefox (Ubuntu) Assignee: Mark Shuttleworth (sabdfl) => (unassigned) -- Firefox crashes when attempting to print to file (PDF) https://bugs.launchpad.net/bugs/263348 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 237811] Re: Kbluetooth crashes after resume on suspend
I can confirm crash of KBluetooth4 under Kubuntu 8.10 on resume from suspend. System is IBM ThinkPad R50p. -- Kbluetooth crashes after resume on suspend https://bugs.launchpad.net/bugs/237811 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327541] [NEW] No komma in Calculator
Public bug reported: Binary package hint: gcalctool gcalctool 5.25.90-0ubuntu1 Ubuntu 9.04, 2.6.28-7 generic Gnome 2.25.5 german Version Divide "100" by "8" should be "12,5" but gcalctool shows "125", so the "," is missing. Might be a translation problem, because the us "." is a "," in german. ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 9.04 ExecutablePath: /usr/bin/gcalctool NonfreeKernelModules: nvidia Package: gcalctool 5.25.90-0ubuntu1 ProcEnviron: LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: gcalctool Uname: Linux 2.6.28-7-generic i686 ** Affects: gcalctool (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- No komma in Calculator https://bugs.launchpad.net/bugs/327541 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327541] Re: No komma in Calculator
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/22435121/Dependencies.txt ** Attachment added: "ProcMaps.txt" http://launchpadlibrarian.net/22435122/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://launchpadlibrarian.net/22435123/ProcStatus.txt -- No komma in Calculator https://bugs.launchpad.net/bugs/327541 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312724] Re: server segfault on radeon 9200 pro
Can you please install xserver-xorg-video-ati-dbg and xserver-xorg- video-radeon-dbg (see https://wiki.ubuntu.com/DebuggingProgramCrash) and try to get a new backtrace (or failsafeX-backup*tar)? ** Changed in: xserver-xorg-video-ati (Ubuntu) Assignee: (unassigned) => Tormod Volden (tormodvolden) Status: Confirmed => Incomplete -- server segfault on radeon 9200 pro https://bugs.launchpad.net/bugs/312724 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 274340] Re: Xorg freezes on start. Black screen with waiting cursor. Unichrome video, worked on hardy.
I have a ASUS K8V-VM motherboard with onchip display card 01:00.0 VGA compatible controller: VIA Technologies, Inc. K8M890CE/K8N890CE [Chrome 9] (rev 11) The jaunty alpha 4 and alpha 3 Live CD (amd64) freezes with the same issues on start up. I havent tried the (x86) Live CD yet. -- Xorg freezes on start. Black screen with waiting cursor. Unichrome video, worked on hardy. https://bugs.launchpad.net/bugs/274340 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327542] [NEW] icons not properly set in icon box when KDE session starts
Public bug reported: when the kde session starts som icons are supposed to install themselves in the icon tray (blackbox) ; I am supposed to get theses ones displayed correctly : - klipper, - kmix, - kxkb, - knetworkmanager, - kwalletmanager. this list obtained from the configuration pop-up menu of the icon tray; now looking at the icon tray I see the following icons : - klipper, - kmix, - kxkb, - help. - Now if I go : - over the klipper icon with the mouse pointer it says : volume (from kmix icon), - over the kmix icon it says : France (from kxkb icon), - over kxkb icon it displays information on net work (from knetworkmanager icon), - over help icon it displays information on kde wallet (from kwalletmanager icon). Conclusion : - one icon is missing, - there is an offset between display and information-action linked to display. ** Affects: ubuntu Importance: Undecided Status: New -- icons not properly set in icon box when KDE session starts https://bugs.launchpad.net/bugs/327542 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 327475] Re: Internal data flow error
100% reproducible in my case Save the playlist file "*.m3u" to disk and run it, letting Ubuntu load Totem automatically. http://www.kohina.com/kohinasolanum.m3u http://rainwave.cc/tunein-rw.php?relay=ca http://rainwave.cc/tunein-oc.php?relay=us -- Internal data flow error https://bugs.launchpad.net/bugs/327475 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 319166] Re: cannot retreive new WLM widnows client buddy icons
how did you generate the patch and did you edit it by hand because patch doesn't success to apply it, also could you mention the patch name in the changelog and wrap at 78 chars, don't forget to change the status to new when adding required informations on a bug or it will not be listed on the sponsoringlist -- cannot retreive new WLM widnows client buddy icons https://bugs.launchpad.net/bugs/319166 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 309311] Re: 8.04 blinking caps lock on bootup
Hello Niels! Could you please tell us if Claudio's suggestion has solved your problem? Thank you. ** Changed in: ubuntu Status: New => Incomplete -- 8.04 blinking caps lock on bootup https://bugs.launchpad.net/bugs/309311 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 295389] Re: This version is extremely out of date
https://launchpad.net/~dmitrij.ledkov/+archive/ppa => Xiphos 3.0.0 => BibleTime 1.7 beta 3 They work together on Hardy/Intrepid/Jaunty ! -- This version is extremely out of date https://bugs.launchpad.net/bugs/295389 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
