Re: [OpenWrt-Devel] please send nvram dump of some brcm47xx based devices

2014-10-24 Thread crow
Here is nvram damp from Asus WL500G Premium v1 ( all RAM is enabled by default )

root@OpenWrt:~# cat /proc/cpuinfo
system type : Broadcom BCM4704
machine : Asus WL500GP V1
processor   : 0
cpu model   : Broadcom BMIPS3300 V0.6
BogoMIPS: 262.96
wait instruction: yes
microsecond timers  : yes
tlb_entries : 32
extra interrupt vector  : yes
hardware watchpoint : no
isa : mips1 mips2 mips32r1
ASEs implemented:
shadow register sets: 1
kscratch registers  : 0
core: 0
VCED exceptions : not available
VCEI exceptions : not available

root@OpenWrt:~# nvram show
ddns_server_x=
usb_bannum_x=0
boardnum=45
sr_netmask_x=
fw_log_x=none
wl_radio_power_x=17
wl_guest_key3_1=
kernel_gpio_init_out_6=1
wl_wme_no_ack=off
usb_disc0_path4=
usb_disc0_path5=
kernel_gpio_init_out_3=1
usb_disc0_path6=
lan_hwnames=
usb_disc0_path0=
wl_radio_date_x=111
usb_disc0_path1=
autofw_outproto_x=
usb_disc0_path2=
usb_disc0_path3=
wl_radio=1
usb_ftpscript_x=
usb_storage_busy=0
apps_pool=harddisk/part0
sr_ipaddr_x=
usb_disc0_dev=
default_new_disk_action=no_action
usb_disc1_fs_path5=
usb_disc1_fs_path6=
landevs=vlan0 wl0
usb_disc1_fs_path1=
usb_disc0_fs_path4=
autofw_inproto_x=
usb_disc1_fs_path2=
usb_disc0_fs_path5=
vts_enable_x=1
usb_disc1_fs_path3=
usb_disc0_fs_path6=
apps_dms_usb_port_x=-1
usb_disc1_fs_path4=
usb_disc0_fs_path0=
usb_webremote3_x=
usb_disc0_fs_path1=
st_samba_mode=1
no_br=0
usb_disc0_fs_path2=
filter_wl_srcport_x=
usb_disc1_fs_path0=
usb_disc0_fs_path3=
wl_radio_time_x=2359
dhcp_staticip_x=
wl_guest_enable=0
wl_wep=disabled
web_hook_libraries=corewebhooks netwebhooks diskwebhooks winnet
printwebhooks netregistration samplenetregistration samplehooks
wan_pppoe_relay_x=0
qos_enable=0
hardware_version=WL500gp-01-02-00-00
apps_dl_x=-1
acc_num=0
wl_auth=0
sdram_ncdl=0x607
lan_ifname=br0
wl_guest_key4_1=
qos_global_enable=0
wl_wds=
preferred_lang=EN
wl_guest_phrase_x_1=
wl_radius_key=
wan_pptp_options_x=
wan_dns_t=
usb_webremote_x=LAN Only
qos_service_name_x=
st_ftp_mode=1
wl_crypto=0
ure_disable=1
usb_webhttpport_x=7776
ntp_server=192.5.41.40 192.5.41.41 133.100.9.2
usb_webremote4_x=
usb_ftpmax_x=12
sr_rip_x=0
wl_rate=0
qos_dfragment_size=0
ddns_enable_x=0
wl_key1=
qos_pshack_prio=0
wl_key2=
wl_key3=
wl_key4=
time_zone_x=
dhcp_wins=wan
wl_guest_wpa_psk_1=
wl_macapply_x=Both
os_server=
usb_webcaption_x=Web Camera Live Demo!!!
wan_netmask_t=
dr_default_x=1
wl_wpa_gtk_rekey=0
lan_dhcp=0
fw_lw_enable_x=0
misc_lpr_x=0
usb_ftpstaytimeout_x=240
mr_enable_x=0
filter_lw_num_x=0
wan_hwaddr_x=
usb_websense_x=1
wl_guest_key_1=1
wl_lazywds=0
os_date=May 14 2008
usb_webremote5_x=
http_lanport=80
usb_ftpenable_x=1
et1mdcport=1
filter_lw_date_x=111
wl_gmode=1
filter_lw_icmp_x=
filter_wl_icmp_x=
vts_port_x=
dhcp_end=192.168.1.254
filter_wl_date_x=111
wl_guest_crypto_1=0
vts_desc_x=
wan_gateway=
vlan0ports=1 2 3 4 5*
ses_enable=0
lan_route=
lan1_ipaddr=192.168.2.1
wl_net_reauth=36000
ddns_status_t=
lan_gateway=
wl_guest_auth_mode_1=open
filter_lw_time_x=2359
wan_lease=86400
filter_wl_time_x=2359
restore_defaults=0
usb_webmserver_x=
wan_nat_x=1
wl_maxassoc=128
wl_gmode_protection_x=0
usb_webremote6_x=
wan_pppoe_ifname=
firmver=1.9.7.7
default_http_username=
wan_heartbeat_x=
wan_proto_t=
upnp_enable=1
sh_=
default_workgroup=WORKGROUP
wl_key=1
ddns_hostname_x=
lan_proto_x=1
swap_on=0
dhcp1_end=192.168.2.254
autofw_enable_x=0
gpio_3_name=power_enable
qos_tos_prio=0
wl_ap_isolate=0
lan_wins=
wl_rts=2347
ezc_version=2
wl_channel=0
wl_wme_sta_bk=15 1023 7 0 0 off
wl_wme_sta_be=15 1023 3 0 0 off
wan_hostname=
wan_status_t=
dhcp1_start=192.168.2.2
fw_enable_x=1
usb_webattach_x=1
wan_ifname=eth0
filter_lw_default_x=ACCEPT
misc_io_mode=bcmgpio
apps_running=0
macfilter_list_x=
usb_disc1_port=0
os_version=3.131.20.0
wl_ifname=
wan_wins=
misc_natlog_x=0
wl_frameburst=0
ddns_updated=0
wl_macnum_x=0
usb_webenable_x=1
wl_wme_ap_vo=3 7 1 3264 1504 off
wl_wme_ap_vi=7 15 1 6016 3008 off
apps_dl_share=0
sdram_config=0x0062
dmz_ipaddr=
usb_device=
url_enable_x=0
vlan1hwname=et0
wl_unit=0
default_primary_share_name=
qos_shortpkt_prio=0
eject_from_web=0
acc_=
wl_country=
wl_wep_x=0
filter_lw_srcport_x=
apps_ver=
usb_websendto_x=
wan_pppoe_idletime=0
gpio_0_name=soft_power_switch
wl_guest_wep_x_1=0
st_max_user=6
default_physical_authentication_enable=disabled
st_samba_mode_x=-1
wlan_ifname=eth1
wl_dtim=1
dhcp_staticnum_x=0
apps_disk_free=0
wl_wds_timeout=1
lan_hwaddr=
wan_pppoe_options_x=
filter_wl_dstip_x=
autofw_inport_x=
wan_route_x=IP_Routed
usb_disc1_index=0
wl_mode=ap
custom_shutdown_command=stoprcasus
http_passwd=admin
lan_ifnames_t=vlan0 eth1
wan_pppoe_demand=0
wl_auth_mode=open
cfe_wait_led_gpio=1
filter_client0=
lan1_lease=86400
apps_status_checked=0
wl_macmode=disabled
wan_hwname=
wan_netmask=
wl_plcphdr=long
http_username=admin
st_samba_workgroup=WORKGROUP
computer_name=WL500g

Re: [OpenWrt-Devel] Backfire (toolchain) debug advice needed: firmware built with Ubuntu 11.10 crashes, but works if built with 11.04

2011-12-29 Thread crow
I am also facing these image compile error on Archlinux [1]. Also
there is on Archlinux topic discussion [2]  about same issue. Can
someone help us.

[1] https://dev.openwrt.org/ticket/10587#comment:3
[2] https://bbs.archlinux.org/viewtopic.php?id=132003
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel