Re: AArch64 toolchain status

2014-01-31 Thread Anil Singhar 
Hi Ryan,

Thanks for your detailed answer and help.

I am trying to build my own image now, so that I can use a much larger disk.
However I am not able to download the required HW_pack  (
hwpack_linaro-vexpress64-rtsm_20131215-557_arm64_supported.tar.gz)

and the rootfs 
(linaro-image-lamp-genericarmv8-20131215-598.rootfs.tar.gz)
that I need to build the image. The links don't seem to work.
Also prebuilt image link (
vexpress64-openembedded_lamp-armv8-gcc-4.8_20131215-557.img.gz)
doesn't work.

It is mentioned in the 2nd tab that: " 1Linaro does not provide support for
running the Versatile Express models."

Could that be the reason, the links are not working..?

Which HW pack and rootfs file did you use..?

Thanks and Regards,
Anil



On 31 January 2014 12:51, Ryan Harkin  wrote:

>
>
>
> On 30 January 2014 21:31, Mike Frysinger  wrote:
>
>> On Thursday, January 30, 2014 18:10:43 Anil Singhar wrote:
>> > I am using the following command to start the foundation model:
>> >
>> 
>> > ---
>> > anilss@anilss:~/Linaro/tools/Foundation_v8pkg/models/Linux64_GCC-4.1$
>> > ./Foundation_v8 --mbedded_lamp-armv8_20130719-403.img --network=na
>>
> > --network-nat-ports=8022=22
>>
>
> Anil, of course, this is the same corrupt command you've pasted in this
> email and your other one that I've replied to.
>
>
>  > terminal_0: Listening for serial connection on port 5000
>> > terminal_1: Listening for serial connection on port 5001
>> > terminal_2: Listening for serial connection on port 5002
>> > terminal_3: Listening for serial connection on port 5003
>> > Simulation is started
>> >
>> 
>> > -
>> >
>> > Could I not add some switch to this command to increase my disk space?
>>
>
> You cannot increase the disk space at the time when you run the model.
> You have to create it at the correct size or increase it using gparted or
> some other equivalent disk editor.
>
>
>
>> the simulator knows nothing of disk partitions and things like that.  you
>> have
>> to manage the disk image yourself.
>>
>
> Mike, unless I misunderstand you, I don't think that is correct.
>
> The model reads the image file as if it were a disk with partitions inside
> it.  For example, the standard images that we provides have two
> partitions:  boot and root.
>
> Anil, Ard was correct in that you can run gparted on a disk image to
> manage it.
>
> However, you probably just want to create a new disk image with a larger
> size.  If you go to the release notes [1], it gives you instructions on how
> to create your own disk image, eg:
>
> linaro-media-create --dev fastmodel --output-directory fastmodel --image_size 
> 2000M --hwpack  --binary 
>
> So, just change the "--image_size 2000M" to something bigger, like
> "--image_size 16000M" and you'll get a 16GB filesystem.
>
> I just tried it and when I launch the model, I can see I now have 15.2GB
> of free disk space:
>
> root@genericarmv8:~# df -h .
> FilesystemSize  Used Available Use% Mounted on
> /dev/root15.2G269.7M 14.1G   2% /
>
>
> [1] releases.linaro.org/latest/openembedded/aarch64/#tabs-2
>
>
>
>> -mike
>>
>> ___
>> linaro-dev mailing list
>> linaro-dev@lists.linaro.org
>> http://lists.linaro.org/mailman/listinfo/linaro-dev
>>
>
>
> ___
> linaro-dev mailing list
> linaro-dev@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
>
>
___
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Re: AArch64 toolchain status

2014-01-31 Thread Ryan Harkin 
On 31 January 2014 08:22, Anil Singhar  wrote:

> Hi Ryan,
>
> Thanks for your detailed answer and help.
>
> I am trying to build my own image now, so that I can use a much larger
> disk.
> However I am not able to download the required HW_pack  (
> hwpack_linaro-vexpress64-rtsm_20131215-557_arm64_supported.tar.gz)
>
> and the rootfs 
> (linaro-image-lamp-genericarmv8-20131215-598.rootfs.tar.gz)
> that I need to build the image. The links don't seem to work.
> Also prebuilt image link (
> vexpress64-openembedded_lamp-armv8-gcc-4.8_20131215-557.img.gz)
> doesn't work.
>

OK, so you need to refresh your page, Koen has just released 14.01 and the
"latest" links are now different.

http://releases.linaro.org/14.01/openembedded/aarch64/
http://releases.linaro.org/14.01/openembedded/aarch64/hwpack_linaro-vexpress64-rtsm_20140126-596_arm64_supported.tar.gz
http://releases.linaro.org/14.01/openembedded/aarch64/vexpress64-openembedded_lamp-armv8-gcc-4.8_20140126-596.img.gz



>
> It is mentioned in the 2nd tab that: " 1Linaro does not provide support
> for running the Versatile Express models."
>
> Could that be the reason, the links are not working..?
>

No.

>
> Which HW pack and rootfs file did you use..?
>
> Thanks and Regards,
> Anil
>
>
>
> On 31 January 2014 12:51, Ryan Harkin  wrote:
>
>>
>>
>>
>> On 30 January 2014 21:31, Mike Frysinger  wrote:
>>
>>> On Thursday, January 30, 2014 18:10:43 Anil Singhar wrote:
>>> > I am using the following command to start the foundation model:
>>> >
>>> 
>>> > ---
>>> > anilss@anilss:~/Linaro/tools/Foundation_v8pkg/models/Linux64_GCC-4.1$
>>> > ./Foundation_v8 --mbedded_lamp-armv8_20130719-403.img --network=na
>>>
>> > --network-nat-ports=8022=22
>>>
>>
>> Anil, of course, this is the same corrupt command you've pasted in this
>> email and your other one that I've replied to.
>>
>>
>>  > terminal_0: Listening for serial connection on port 5000
>>> > terminal_1: Listening for serial connection on port 5001
>>> > terminal_2: Listening for serial connection on port 5002
>>> > terminal_3: Listening for serial connection on port 5003
>>> > Simulation is started
>>> >
>>> 
>>> > -
>>> >
>>> > Could I not add some switch to this command to increase my disk space?
>>>
>>
>> You cannot increase the disk space at the time when you run the model.
>> You have to create it at the correct size or increase it using gparted or
>> some other equivalent disk editor.
>>
>>
>>
>>> the simulator knows nothing of disk partitions and things like that.
>>>  you have
>>> to manage the disk image yourself.
>>>
>>
>> Mike, unless I misunderstand you, I don't think that is correct.
>>
>> The model reads the image file as if it were a disk with partitions
>> inside it.  For example, the standard images that we provides have two
>> partitions:  boot and root.
>>
>> Anil, Ard was correct in that you can run gparted on a disk image to
>> manage it.
>>
>> However, you probably just want to create a new disk image with a larger
>> size.  If you go to the release notes [1], it gives you instructions on how
>> to create your own disk image, eg:
>>
>> linaro-media-create --dev fastmodel --output-directory fastmodel 
>> --image_size 2000M --hwpack  --binary 
>>
>> So, just change the "--image_size 2000M" to something bigger, like
>> "--image_size 16000M" and you'll get a 16GB filesystem.
>>
>> I just tried it and when I launch the model, I can see I now have 15.2GB
>> of free disk space:
>>
>> root@genericarmv8:~# df -h .
>> FilesystemSize  Used Available Use% Mounted on
>> /dev/root15.2G269.7M 14.1G   2% /
>>
>>
>> [1] releases.linaro.org/latest/openembedded/aarch64/#tabs-2
>>
>>
>>
>>> -mike
>>>
>>> ___
>>> linaro-dev mailing list
>>> linaro-dev@lists.linaro.org
>>> http://lists.linaro.org/mailman/listinfo/linaro-dev
>>>
>>
>>
>> ___
>> linaro-dev mailing list
>> linaro-dev@lists.linaro.org
>> http://lists.linaro.org/mailman/listinfo/linaro-dev
>>
>>
>
___
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Re: AArch64 toolchain status

2014-01-31 Thread Anil Singhar 
Thanks, Ryan !!

I could create my image with 40Gb disk.

Regards,
Anil


On 31 January 2014 14:05, Ryan Harkin  wrote:

>
>
>
> On 31 January 2014 08:22, Anil Singhar  wrote:
>
>> Hi Ryan,
>>
>> Thanks for your detailed answer and help.
>>
>> I am trying to build my own image now, so that I can use a much larger
>> disk.
>> However I am not able to download the required HW_pack  (
>> hwpack_linaro-vexpress64-rtsm_20131215-557_arm64_supported.tar.gz)
>>
>> and the rootfs 
>> (linaro-image-lamp-genericarmv8-20131215-598.rootfs.tar.gz)
>> that I need to build the image. The links don't seem to work.
>> Also prebuilt image link (
>> vexpress64-openembedded_lamp-armv8-gcc-4.8_20131215-557.img.gz)
>> doesn't work.
>>
>
> OK, so you need to refresh your page, Koen has just released 14.01 and the
> "latest" links are now different.
>
> http://releases.linaro.org/14.01/openembedded/aarch64/
>
> http://releases.linaro.org/14.01/openembedded/aarch64/hwpack_linaro-vexpress64-rtsm_20140126-596_arm64_supported.tar.gz
>
> http://releases.linaro.org/14.01/openembedded/aarch64/vexpress64-openembedded_lamp-armv8-gcc-4.8_20140126-596.img.gz
>
>
>
>>
>> It is mentioned in the 2nd tab that: " 1Linaro does not provide support
>> for running the Versatile Express models."
>>
>> Could that be the reason, the links are not working..?
>>
>
> No.
>
>>
>> Which HW pack and rootfs file did you use..?
>>
>> Thanks and Regards,
>> Anil
>>
>>
>>
>> On 31 January 2014 12:51, Ryan Harkin  wrote:
>>
>>>
>>>
>>>
>>> On 30 January 2014 21:31, Mike Frysinger  wrote:
>>>
 On Thursday, January 30, 2014 18:10:43 Anil Singhar wrote:
 > I am using the following command to start the foundation model:
 >
 
 > ---
 > anilss@anilss:~/Linaro/tools/Foundation_v8pkg/models/Linux64_GCC-4.1$
 > ./Foundation_v8 --mbedded_lamp-armv8_20130719-403.img --network=na

>>> > --network-nat-ports=8022=22

>>>
>>> Anil, of course, this is the same corrupt command you've pasted in this
>>> email and your other one that I've replied to.
>>>
>>>
>>>  > terminal_0: Listening for serial connection on port 5000
 > terminal_1: Listening for serial connection on port 5001
 > terminal_2: Listening for serial connection on port 5002
 > terminal_3: Listening for serial connection on port 5003
 > Simulation is started
 >
 
 > -
 >
 > Could I not add some switch to this command to increase my disk space?

>>>
>>> You cannot increase the disk space at the time when you run the model.
>>> You have to create it at the correct size or increase it using gparted or
>>> some other equivalent disk editor.
>>>
>>>
>>>
 the simulator knows nothing of disk partitions and things like that.
  you have
 to manage the disk image yourself.

>>>
>>> Mike, unless I misunderstand you, I don't think that is correct.
>>>
>>> The model reads the image file as if it were a disk with partitions
>>> inside it.  For example, the standard images that we provides have two
>>> partitions:  boot and root.
>>>
>>> Anil, Ard was correct in that you can run gparted on a disk image to
>>> manage it.
>>>
>>> However, you probably just want to create a new disk image with a larger
>>> size.  If you go to the release notes [1], it gives you instructions on how
>>> to create your own disk image, eg:
>>>
>>> linaro-media-create --dev fastmodel --output-directory fastmodel 
>>> --image_size 2000M --hwpack  --binary 
>>>
>>> So, just change the "--image_size 2000M" to something bigger, like
>>> "--image_size 16000M" and you'll get a 16GB filesystem.
>>>
>>> I just tried it and when I launch the model, I can see I now have 15.2GB
>>> of free disk space:
>>>
>>> root@genericarmv8:~# df -h .
>>> FilesystemSize  Used Available Use% Mounted on
>>> /dev/root15.2G269.7M 14.1G   2% /
>>>
>>>
>>> [1] releases.linaro.org/latest/openembedded/aarch64/#tabs-2
>>>
>>>
>>>
 -mike

 ___
 linaro-dev mailing list
 linaro-dev@lists.linaro.org
 http://lists.linaro.org/mailman/listinfo/linaro-dev

>>>
>>>
>>> ___
>>> linaro-dev mailing list
>>> linaro-dev@lists.linaro.org
>>> http://lists.linaro.org/mailman/listinfo/linaro-dev
>>>
>>>
>>
>
___
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.li

Re: AArch64 toolchain status

2014-01-31 Thread Mike Frysinger 
On Friday, January 31, 2014 07:21:02 Ryan Harkin wrote:
> On 30 January 2014 21:31, Mike Frysinger  wrote:
> > the simulator knows nothing of disk partitions and things like that.  you
> > have
> > to manage the disk image yourself.
> 
> Mike, unless I misunderstand you, I don't think that is correct.
> 
> The model reads the image file as if it were a disk with partitions inside
> it.  For example, the standard images that we provides have two
> partitions:  boot and root.

the model reads the file as a file.  it is the kernel itself that parses it 
looking for partition tables/filesystems/etc...

so i'm comfortable with my previous statement being correct.
-mike

signature.asc
Description: This is a digitally signed message part.
___
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev