[Kernel-packages] [Bug 1878635] [NEW] Intel Titan Ridge TB3 USB Controller prevents system from suspending
Public bug reported: The dmesg log states the following: PM: Device :0f:00.0 failed to suspend async: error -110 When checking lspci this points to the following device: 0f:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 2C 2018] (rev 06) which is the integrated Thunderbolt 3 Controller of the ITX Motherboard. I will still try suspending without a Thunderbolt 3 Dock attached. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-29-generic 5.4.0-29.33 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: spyfly 2424 F pulseaudio /dev/snd/controlC3: spyfly 2424 F pulseaudio /dev/snd/controlC1: spyfly 2424 F pulseaudio /dev/snd/controlC2: spyfly 2424 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Thu May 14 17:09:55 2020 HibernationDevice: RESUME=UUID=3b541ffc-65d1-41a6-87d4-11750893bae2 InstallationDate: Installed on 2018-09-06 (616 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-29-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-29-generic N/A linux-backports-modules-5.4.0-29-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/01/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.78 dmi.board.name: X570 Phantom Gaming-ITX/TB3 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.78:bd11/01/2019:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnX570PhantomGaming-ITX/TB3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1878635 Title: Intel Titan Ridge TB3 USB Controller prevents system from suspending Status in linux package in Ubuntu: Confirmed Bug description: The dmesg log states the following: PM: Device :0f:00.0 failed to suspend async: error -110 When checking lspci this points to the following device: 0f:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 2C 2018] (rev 06) which is the integrated Thunderbolt 3 Controller of the ITX Motherboard. I will still try suspending without a Thunderbolt 3 Dock attached. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-29-generic 5.4.0-29.33 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: spyfly 2424 F pulseaudio /dev/snd/controlC3: spyfly 2424 F pulseaudio /dev/snd/controlC1: spyfly 2424 F pulseaudio /dev/snd/controlC2: spyfly 2424 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Thu May 14 17:09:55 2020 HibernationDevice: RESUME=UUID=3b541ffc-65d1-41a6-87d4-11750893bae2 InstallationDate: Installed on 2018-09-06 (616 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-29-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-29-generic N/A linux-backports-modules-5.4.0-29-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/01/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.7
[Kernel-packages] [Bug 1878635] Re: Intel Titan Ridge TB3 USB Controller prevents system from suspending
** Package changed: linux (Ubuntu) => powermgmt-base (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1878635 Title: Intel Titan Ridge TB3 USB Controller prevents system from suspending Status in powermgmt-base package in Ubuntu: Confirmed Bug description: The dmesg log states the following: PM: Device :0f:00.0 failed to suspend async: error -110 When checking lspci this points to the following device: 0f:00.0 USB controller: Intel Corporation JHL7540 Thunderbolt 3 USB Controller [Titan Ridge 2C 2018] (rev 06) which is the integrated Thunderbolt 3 Controller of the ITX Motherboard. I will still try suspending without a Thunderbolt 3 Dock attached. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.4.0-29-generic 5.4.0-29.33 ProcVersionSignature: Ubuntu 5.4.0-29.33-generic 5.4.30 Uname: Linux 5.4.0-29-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: spyfly 2424 F pulseaudio /dev/snd/controlC3: spyfly 2424 F pulseaudio /dev/snd/controlC1: spyfly 2424 F pulseaudio /dev/snd/controlC2: spyfly 2424 F pulseaudio CasperMD5CheckResult: skip CurrentDesktop: ubuntu:GNOME Date: Thu May 14 17:09:55 2020 HibernationDevice: RESUME=UUID=3b541ffc-65d1-41a6-87d4-11750893bae2 InstallationDate: Installed on 2018-09-06 (616 days ago) InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64 (20180725) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-29-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.4.0-29-generic N/A linux-backports-modules-5.4.0-29-generic N/A linux-firmware1.187 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/01/2019 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P1.78 dmi.board.name: X570 Phantom Gaming-ITX/TB3 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP1.78:bd11/01/2019:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:rvnASRock:rnX570PhantomGaming-ITX/TB3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/powermgmt-base/+bug/1878635/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] [NEW] Fans running full speed on skylake platform
Public bug reported: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Attachment added: "lspci-vnvn.log" https://bugs.launchpad.net/bugs/1607783/+attachment/4709438/+files/lspci-vnvn.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: New Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] Re: Fans running full speed on skylake platform
apport information ** Tags added: apport-collected xenial ** Description changed: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS + --- + ApportVersion: 2.20.1-0ubuntu2.1 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: ubuntu 4839 F pulseaudio + CasperVersion: 1.376 + DistroRelease: Ubuntu 16.04 + LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) + MachineType: ASUSTeK COMPUTER INC. GL502VT + Package: linux (not installed) + ProcEnviron: + TERM=xterm-256color + PATH=(custom, no user) + LANG=en_US.UTF-8 + SHELL=/bin/bash + ProcFB: 0 EFI VGA + ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- + ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 + PulseList: + Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied + No PulseAudio daemon running, or not running as session daemon. + RelatedPackageVersions: + linux-restricted-modules-4.4.0-31-generic N/A + linux-backports-modules-4.4.0-31-generic N/A + linux-firmware1.157.2 + Tags: xenial + Uname: Linux 4.4.0-31-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: + + _MarkForUpload: True + dmi.bios.date: 06/14/2016 + dmi.bios.vendor: American Megatrends Inc. + dmi.bios.version: GL502VT.300 + dmi.board.asset.tag: ATN12345678901234567 + dmi.board.name: GL502VT + dmi.board.vendor: ASUSTeK COMPUTER INC. + dmi.board.version: 1.0 + dmi.chassis.asset.tag: ATN12345678901234567 + dmi.chassis.type: 10 + dmi.chassis.vendor: ASUSTeK COMPUTER INC. + dmi.chassis.version: 1.0 + dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: + dmi.product.name: GL502VT + dmi.product.version: 1.0 + dmi.sys.vendor: ASUSTeK COMPUTER INC. ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709452/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+
[Kernel-packages] [Bug 1607783] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709458/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709463/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709462/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709454/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709453/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709455/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709464/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] JournalErrors.txt
apport information ** Attachment added: "JournalErrors.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709456/+files/JournalErrors.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709460/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709465/+files/WifiSyslog.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709461/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1607783/+attachment/4709459/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] Re: Fans running full speed on skylake platform
As this is a brand new device I tried 16.04 LTS first where the bug was persistent, same for 14.04. But the lastest upstream kernel fixed this. Thanks for your help. ** Tags added: kernel-fixed-upstream ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1607783] Re: Fans running full speed on skylake platform
Maybe its a dedicated GPU Fan Controlled by the GPU? Try installing the lastest Nvidia Drivers, use mainline 4.6 for that and the Nvidia Drivers ppa. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1607783 Title: Fans running full speed on skylake platform Status in linux package in Ubuntu: Confirmed Bug description: The Fans on my ASUS GL502VT Laptop start spinning full speed after about 2 minutes after bootup in default mode. If I boot with nomodeset boot parameter it seems not to happen. The Device is running the lastest BIOS by ASUS. Kernel Version: Ubuntu 4.4.0-31.50-generic 4.4.13 Ubuntu Version: 16.04.1 LTS --- ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 4839 F pulseaudio CasperVersion: 1.376 DistroRelease: Ubuntu 16.04 LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) MachineType: ASUSTeK COMPUTER INC. GL502VT Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/hostname.seed boot=casper quiet nomodeset splash --- ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not accessible: Permission denied No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.4.0-31-generic N/A linux-backports-modules-4.4.0-31-generic N/A linux-firmware1.157.2 Tags: xenial Uname: Linux 4.4.0-31-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 06/14/2016 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: GL502VT.300 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: GL502VT dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrGL502VT.300:bd06/14/2016:svnASUSTeKCOMPUTERINC.:pnGL502VT:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnGL502VT:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: GL502VT dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1607783/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1971712] Re: Add support for Intel DG2
It seems like there is no more force-probe required for oem-6.1, works fine out-of-the-box now. When is the 22.2 mesa from ppa:canonical-x/x-staging going to be released, currently using the linux-oem-6.1 kernel together with the 23.0 mesa from the Intel Arc package sources. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1971712 Title: Add support for Intel DG2 Status in linux-firmware package in Ubuntu: Fix Released Status in linux-oem-5.17 package in Ubuntu: Invalid Status in linux-oem-6.1 package in Ubuntu: Invalid Status in mesa package in Ubuntu: Fix Released Status in linux-firmware source package in Jammy: Fix Released Status in linux-oem-5.17 source package in Jammy: Won't Fix Status in linux-oem-6.1 source package in Jammy: Fix Committed Status in mesa source package in Jammy: Fix Released Status in linux-firmware source package in Kinetic: Fix Released Bug description: [Impact] Ubuntu 22.04 does not support Intel DG2-based hw which is released later this year. [Fix] Mesa: needs a bunch of patches backported to 22.0.x, will be upstream in 22.1 or 22.2 kernel: oem-6.0 plus a bunch of backports from 6.1/drm-tip firmare: updates to i915 DMC, GuC [Test case] Boot a system with a DG2-based GPU, check that native graphics drivers are used. Test mesa also on gen9-gen12 GPU's to verify that there are no regressions even though the backports are for DG2. [What could go wrong] The Mesa patches are only for DG2 support, should not affect other hardware at all. The kernel driver is in a separate package which isn't installed by default except preinstall machines with this hardware. So other users are not affected. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1971712/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1994025] Re: Suspend or hibernate fails when using Arc Alchemist (DG2) graphics
Seems like this issue was caused by nvidia driver remainders, which caused an instant wake-up after suspend or hibernate. ** Changed in: linux-oem-6.0 (Ubuntu) Status: New => Incomplete ** Changed in: linux-oem-6.0 (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-6.0 in Ubuntu. https://bugs.launchpad.net/bugs/1994025 Title: Suspend or hibernate fails when using Arc Alchemist (DG2) graphics Status in linux-oem-6.0 package in Ubuntu: Invalid Bug description: The computer is unable to suspend or hibernate, when a DG2 graphics card is installed and in-use in the system. When attempting to suspend or hibernate the system will turn off its screens for a few seconds after which they will light up again. I am using the latest linux-oem-6.0 kernel and the mesa 22.2 packages from the canonical-x/x-staging ppa. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-oem-22.04b 6.0.0.1005.5 ProcVersionSignature: Ubuntu 6.0.0-1005.5-oem 6.0.0 Uname: Linux 6.0.0-1005-oem x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Oct 24 12:07:27 2022 InstallationDate: Installed on 2022-02-23 (242 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220223) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: linux-meta-oem-6.0 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-oem-6.0/+bug/1994025/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1906476] Re: PANIC at zfs_znode.c:335:zfs_znode_sa_init() // VERIFY(0 == sa_handle_get_from_db(zfsvfs->z_os, db, zp, SA_HDL_SHARED, &zp->z_sa_hdl)) failed
I also experienced this bug on Ubuntu 21.10 Beta during boot on a fresh ZFS Install with Encryption. The only way to boot into GNOME without crashing was booting through recovery mode. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to zfs-linux in Ubuntu. https://bugs.launchpad.net/bugs/1906476 Title: PANIC at zfs_znode.c:335:zfs_znode_sa_init() // VERIFY(0 == sa_handle_get_from_db(zfsvfs->z_os, db, zp, SA_HDL_SHARED, &zp->z_sa_hdl)) failed Status in Native ZFS for Linux: New Status in zfs-linux package in Ubuntu: In Progress Bug description: Since today while running Ubuntu 21.04 Hirsute I started getting a ZFS panic in the kernel log which was also hanging Disk I/O for all Chrome/Electron Apps. I have narrowed down a few important notes: - It does not happen with module version 0.8.4-1ubuntu11 built and included with 5.8.0-29-generic - It was happening when using zfs-dkms 0.8.4-1ubuntu16 built with DKMS on the same kernel and also on 5.8.18-acso (a custom kernel). - For whatever reason multiple Chrome/Electron apps were affected, specifically Discord, Chrome and Mattermost. In all cases they seem (but I was unable to strace the processes so it was a bit hard ot confirm 100% but by deduction from /proc/PID/fd and the hanging ls) they seem hung trying to open files in their 'Cache' directory, e.g. ~/.cache/google-chrome/Default/Cache and ~/.config/Mattermost/Cache .. while the issue was going on I could not list that directory either "ls" would just hang. - Once I removed zfs-dkms only to revert to the kernel built-in version it immediately worked without changing anything, removing files, etc. - It happened over multiple reboots and kernels every time, all my Chrome apps weren't working but for whatever reason nothing else seemed affected. - It would log a series of spl_panic dumps into kern.log that look like this: Dec 2 12:36:42 optane kernel: [ 72.857033] VERIFY(0 == sa_handle_get_from_db(zfsvfs->z_os, db, zp, SA_HDL_SHARED, &zp->z_sa_hdl)) failed Dec 2 12:36:42 optane kernel: [ 72.857036] PANIC at zfs_znode.c:335:zfs_znode_sa_init() I could only find one other google reference to this issue, with 2 other users reporting the same error but on 20.04 here: https://github.com/openzfs/zfs/issues/10971 - I was not experiencing the issue on 0.8.4-1ubuntu14 and fairly sure it was working on 0.8.4-1ubuntu15 but broken after upgrade to 0.8.4-1ubuntu16. I will reinstall those zfs-dkms versions to verify that. There were a few originating call stacks but the first one I hit was Call Trace: dump_stack+0x74/0x95 spl_dumpstack+0x29/0x2b [spl] spl_panic+0xd4/0xfc [spl] ? sa_cache_constructor+0x27/0x50 [zfs] ? _cond_resched+0x19/0x40 ? mutex_lock+0x12/0x40 ? dmu_buf_set_user_ie+0x54/0x80 [zfs] zfs_znode_sa_init+0xe0/0xf0 [zfs] zfs_znode_alloc+0x101/0x700 [zfs] ? arc_buf_fill+0x270/0xd30 [zfs] ? __cv_init+0x42/0x60 [spl] ? dnode_cons+0x28f/0x2a0 [zfs] ? _cond_resched+0x19/0x40 ? _cond_resched+0x19/0x40 ? mutex_lock+0x12/0x40 ? aggsum_add+0x153/0x170 [zfs] ? spl_kmem_alloc_impl+0xd8/0x110 [spl] ? arc_space_consume+0x54/0xe0 [zfs] ? dbuf_read+0x4a0/0xb50 [zfs] ? _cond_resched+0x19/0x40 ? mutex_lock+0x12/0x40 ? dnode_rele_and_unlock+0x5a/0xc0 [zfs] ? _cond_resched+0x19/0x40 ? mutex_lock+0x12/0x40 ? dmu_object_info_from_dnode+0x84/0xb0 [zfs] zfs_zget+0x1c3/0x270 [zfs] ? dmu_buf_rele+0x3a/0x40 [zfs] zfs_dirent_lock+0x349/0x680 [zfs] zfs_dirlook+0x90/0x2a0 [zfs] ? zfs_zaccess+0x10c/0x480 [zfs] zfs_lookup+0x202/0x3b0 [zfs] zpl_lookup+0xca/0x1e0 [zfs] path_openat+0x6a2/0xfe0 do_filp_open+0x9b/0x110 ? __check_object_size+0xdb/0x1b0 ? __alloc_fd+0x46/0x170 do_sys_openat2+0x217/0x2d0 ? do_sys_openat2+0x217/0x2d0 do_sys_open+0x59/0x80 __x64_sys_openat+0x20/0x30 To manage notifications about this bug go to: https://bugs.launchpad.net/zfs/+bug/1906476/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1949793] [NEW] Thunderbolt 3 NIC driver is loaded too early and won't establish connection
Public bug reported: I am using a Thunderbolt 3 Pro Dock with a built in Aquantia 10 GBase-T NIC (atlantic). The issue is that during boot it only detects the interface as 5 GBe, as seen in dmesg: enp11s0: atlantic: link change old 0 new 5000 This prevents the interface from establishing a connection. With Ubuntu 21.04 and previous versions this issue didn't exist. I found a couple workarounds for this problem: 1. Enable Thunderbolt Security (User Authorization or Secure Connect) in the BIOS. This prevents the computer from suspending however, so this workaround isn't feasible. 2. Run sudo rmmod atlantic && modprobe atlantic and the NIC will connect at 10 GBe without issues as seen below: atlantic :0b:00.0 enp11s0: atlantic: link change old 0 new 1 >From the obervations above, I draw the conclusion that the module gets loaded too early with Thunderbolt Security disabled and should happen at a later point in time. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: linux-image-5.13.0-20-generic 5.13.0-20.20 ProcVersionSignature: Ubuntu 5.13.0-20.20-generic 5.13.14 Uname: Linux 5.13.0-20-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: spyfly 3576 F pulseaudio /dev/snd/pcmC2D0p: spyfly 3576 F...m pulseaudio /dev/snd/controlC1: spyfly 3576 F pulseaudio /dev/snd/controlC0: spyfly 3576 F pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Thu Nov 4 15:47:34 2021 HibernationDevice: RESUME=none InstallationDate: Installed on 2021-10-19 (15 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Daily amd64 (20211006) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/BOOT/ubuntu_qbynho@/vmlinuz-5.13.0-20-generic root=ZFS=rpool/ROOT/ubuntu_qbynho ro quiet splash vt.handoff=1 RelatedPackageVersions: linux-restricted-modules-5.13.0-20-generic N/A linux-backports-modules-5.13.0-20-generic N/A linux-firmware 1.201.1 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P3.20 dmi.board.name: X570 Phantom Gaming-ITX/TB3 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP3.20:bd08/11/2021:br5.17:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:skuToBeFilledByO.E.M.:rvnASRock:rnX570PhantomGaming-ITX/TB3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug impish -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1949793 Title: Thunderbolt 3 NIC driver is loaded too early and won't establish connection Status in linux package in Ubuntu: New Bug description: I am using a Thunderbolt 3 Pro Dock with a built in Aquantia 10 GBase-T NIC (atlantic). The issue is that during boot it only detects the interface as 5 GBe, as seen in dmesg: enp11s0: atlantic: link change old 0 new 5000 This prevents the interface from establishing a connection. With Ubuntu 21.04 and previous versions this issue didn't exist. I found a couple workarounds for this problem: 1. Enable Thunderbolt Security (User Authorization or Secure Connect) in the BIOS. This prevents the computer from suspending however, so this workaround isn't feasible. 2. Run sudo rmmod atlantic && modprobe atlantic and the NIC will connect at 10 GBe without issues as seen below: atlantic :0b:00.0 enp11s0: atlantic: link change old 0 new 1 From the obervations above, I draw the conclusion that the module gets loaded too early with Thunderbolt Security disabled and should happen at a later point in time. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: linux-image-5.13.0-20-generic 5.13.0-20.20 ProcVersionSignature: Ubuntu 5.13.0-20.20-generic 5.13.14 Uname: Linux 5.13.0-20-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: spyfly 3576 F pulseaudi
[Kernel-packages] [Bug 1949790] [NEW] Thunderbolt 3 NIC driver is loaded too early and won't establish connection
Public bug reported: I am using a Thunderbolt 3 Pro Dock with a built in Aquantia 10 GBase-T NIC (atlantic). The issue is that during boot it only detects the interface as 5 GBe, as seen in dmesg: enp11s0: atlantic: link change old 0 new 5000 This prevents the interface from establishing a connection. With Ubuntu 21.04 and previous versions this issue didn't exist. I found a couple workarounds for this problem: 1. Enable Thunderbolt Security (User Authorization or Secure Connect) in the BIOS. This prevents the computer from suspending however, so this workaround isn't feasible. 2. Run sudo rmmod atlantic && modprobe atlantic and the NIC will connect at 10 GBe without issues as seen below: atlantic :0b:00.0 enp11s0: atlantic: link change old 0 new 1 >From the obervations above, I draw the conclusion that the module gets loaded too early with Thunderbolt Security disabled and should happen at a later point in time. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: linux-image-5.13.0-20-generic 5.13.0-20.20 ProcVersionSignature: Ubuntu 5.13.0-20.20-generic 5.13.14 Uname: Linux 5.13.0-20-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: spyfly 3576 F pulseaudio /dev/snd/pcmC2D0p: spyfly 3576 F...m pulseaudio /dev/snd/controlC1: spyfly 3576 F pulseaudio /dev/snd/controlC0: spyfly 3576 F pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Thu Nov 4 15:47:34 2021 HibernationDevice: RESUME=none InstallationDate: Installed on 2021-10-19 (15 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Daily amd64 (20211006) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/BOOT/ubuntu_qbynho@/vmlinuz-5.13.0-20-generic root=ZFS=rpool/ROOT/ubuntu_qbynho ro quiet splash vt.handoff=1 RelatedPackageVersions: linux-restricted-modules-5.13.0-20-generic N/A linux-backports-modules-5.13.0-20-generic N/A linux-firmware 1.201.1 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P3.20 dmi.board.name: X570 Phantom Gaming-ITX/TB3 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP3.20:bd08/11/2021:br5.17:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:skuToBeFilledByO.E.M.:rvnASRock:rnX570PhantomGaming-ITX/TB3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug impish -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1949790 Title: Thunderbolt 3 NIC driver is loaded too early and won't establish connection Status in linux package in Ubuntu: New Bug description: I am using a Thunderbolt 3 Pro Dock with a built in Aquantia 10 GBase-T NIC (atlantic). The issue is that during boot it only detects the interface as 5 GBe, as seen in dmesg: enp11s0: atlantic: link change old 0 new 5000 This prevents the interface from establishing a connection. With Ubuntu 21.04 and previous versions this issue didn't exist. I found a couple workarounds for this problem: 1. Enable Thunderbolt Security (User Authorization or Secure Connect) in the BIOS. This prevents the computer from suspending however, so this workaround isn't feasible. 2. Run sudo rmmod atlantic && modprobe atlantic and the NIC will connect at 10 GBe without issues as seen below: atlantic :0b:00.0 enp11s0: atlantic: link change old 0 new 1 From the obervations above, I draw the conclusion that the module gets loaded too early with Thunderbolt Security disabled and should happen at a later point in time. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: linux-image-5.13.0-20-generic 5.13.0-20.20 ProcVersionSignature: Ubuntu 5.13.0-20.20-generic 5.13.14 Uname: Linux 5.13.0-20-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: spyfly 3576 F pulseaudi
[Kernel-packages] [Bug 1949793] Re: Thunderbolt 3 NIC driver is loaded too early and won't establish connection
*** This bug is a duplicate of bug 1949790 *** https://bugs.launchpad.net/bugs/1949790 ** This bug has been marked a duplicate of bug 1949790 Thunderbolt 3 NIC driver is loaded too early and won't establish connection -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1949793 Title: Thunderbolt 3 NIC driver is loaded too early and won't establish connection Status in linux package in Ubuntu: Confirmed Bug description: I am using a Thunderbolt 3 Pro Dock with a built in Aquantia 10 GBase-T NIC (atlantic). The issue is that during boot it only detects the interface as 5 GBe, as seen in dmesg: enp11s0: atlantic: link change old 0 new 5000 This prevents the interface from establishing a connection. With Ubuntu 21.04 and previous versions this issue didn't exist. I found a couple workarounds for this problem: 1. Enable Thunderbolt Security (User Authorization or Secure Connect) in the BIOS. This prevents the computer from suspending however, so this workaround isn't feasible. 2. Run sudo rmmod atlantic && modprobe atlantic and the NIC will connect at 10 GBe without issues as seen below: atlantic :0b:00.0 enp11s0: atlantic: link change old 0 new 1 From the obervations above, I draw the conclusion that the module gets loaded too early with Thunderbolt Security disabled and should happen at a later point in time. ProblemType: Bug DistroRelease: Ubuntu 21.10 Package: linux-image-5.13.0-20-generic 5.13.0-20.20 ProcVersionSignature: Ubuntu 5.13.0-20.20-generic 5.13.14 Uname: Linux 5.13.0-20-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC2: spyfly 3576 F pulseaudio /dev/snd/pcmC2D0p: spyfly 3576 F...m pulseaudio /dev/snd/controlC1: spyfly 3576 F pulseaudio /dev/snd/controlC0: spyfly 3576 F pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Thu Nov 4 15:47:34 2021 HibernationDevice: RESUME=none InstallationDate: Installed on 2021-10-19 (15 days ago) InstallationMedia: Ubuntu 21.10 "Impish Indri" - Daily amd64 (20211006) MachineType: To Be Filled By O.E.M. To Be Filled By O.E.M. ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/BOOT/ubuntu_qbynho@/vmlinuz-5.13.0-20-generic root=ZFS=rpool/ROOT/ubuntu_qbynho ro quiet splash vt.handoff=1 RelatedPackageVersions: linux-restricted-modules-5.13.0-20-generic N/A linux-backports-modules-5.13.0-20-generic N/A linux-firmware 1.201.1 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/11/2021 dmi.bios.release: 5.17 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P3.20 dmi.board.name: X570 Phantom Gaming-ITX/TB3 dmi.board.vendor: ASRock dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP3.20:bd08/11/2021:br5.17:svnToBeFilledByO.E.M.:pnToBeFilledByO.E.M.:pvrToBeFilledByO.E.M.:skuToBeFilledByO.E.M.:rvnASRock:rnX570PhantomGaming-ITX/TB3:rvr:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.family: To Be Filled By O.E.M. dmi.product.name: To Be Filled By O.E.M. dmi.product.sku: To Be Filled By O.E.M. dmi.product.version: To Be Filled By O.E.M. dmi.sys.vendor: To Be Filled By O.E.M. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1949793/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1876632] Re: [nvidia] Corrupted/missing shell textures when switching users or resuming from suspend
I'm using a RTX 3080 Ti on a Z690 Desktop motherboard and enabling the S0ix option fixed the problem for me. I've added the following option "nvidia.NVreg_EnableS0ixPowerManagement=1" to GRUB_CMDLINE_LINUX_DEFAULT. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu. https://bugs.launchpad.net/bugs/1876632 Title: [nvidia] Corrupted/missing shell textures when switching users or resuming from suspend Status in GNOME Shell: Unknown Status in Mutter: Unknown Status in OEM Priority Project: Confirmed Status in gnome-shell package in Ubuntu: Triaged Status in mutter package in Ubuntu: Triaged Status in nvidia-graphics-drivers-440 package in Ubuntu: Triaged Status in nvidia-graphics-drivers-460 package in Ubuntu: Triaged Status in nvidia-graphics-drivers-470 package in Ubuntu: Triaged Status in nvidia-graphics-drivers-510 package in Ubuntu: Triaged Bug description: [Impact] The Nvidia driver corrupts and/or forgets its textures when resuming from suspend, by design. Documented here: https://www.khronos.org/registry/OpenGL/extensions/NV/NV_robustness_video_memory_purge.txt Although it's so awkward to implement everywhere that realistically compositors will never support it fully. Instead we're waiting for an Nvidia driver fix. *NOTE* that this is actually not a common problem because the system must be using Nvidia as the primary GPU to be affected. So generally only desktop users will encounter the bug, not laptops. And even then, only desktops that use suspend/resume and VT switching may trigger it, if ever. Even in development the bug cannot be reproduced reliably. [Workarounds] * Always log into a Xorg session and if corruption occurs then type: Alt+F2, R, Enter * https://download.nvidia.com/XFree86/Linux-x86_64/510.54/README/powermanagement.html#PreserveAllVide719f0 [Test Plan] [Where problems could occur] [Original Bug Report] I recently installed ubuntu 20.04 on my computer, and I am running into an issue when I do the following: * Login with a user on desktop * Select switch user, and login as second user * Switch user again, and return to original user At this point, text and icons in the menubar / sidebar are corrupted. Text and icons in normal windows appear correctly. I have attached a screenshot of what this looks like. Screenshots: https://imgur.com/a/3ZFDLMc ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-28.32-generic 5.4.30 Uname: Linux 5.4.0-28-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..09.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:09:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 440.64 Fri Feb 21 01:17:26 UTC 2020 GCC version: ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun May 3 18:12:45 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP104 [GeForce GTX 1070] [10de:1b81] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. GP104 [GeForce GTX 1070] [1043:85a0] InstallationDate: Installed on 2020-05-03 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: Gigabyte Technology Co., Ltd. AX370-Gaming ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-28-generic root=/dev/mapper/vgubuntu-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F3 dmi.board.asset.tag: Default string dmi.board.name: AX370-Gaming-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: se1 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF3:bd06/19/2017:svnGigabyteTechnologyCo.,Ltd.:pnAX370-Gaming:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnAX370-Gaming-CF:rvrse1:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: AX370-Gaming dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology
[Kernel-packages] [Bug 1876632] Re: [nvidia] Corrupted/missing shell textures when switching users or resuming from suspend
Try nvidia.NVreg_PreserveVideoMemoryAllocations=1 as suggested by @vanvugt You may wanna change the file path of the temporary file thought for better performance. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu. https://bugs.launchpad.net/bugs/1876632 Title: [nvidia] Corrupted/missing shell textures when switching users or resuming from suspend Status in GNOME Shell: Unknown Status in Mutter: Unknown Status in OEM Priority Project: Confirmed Status in gnome-shell package in Ubuntu: Triaged Status in mutter package in Ubuntu: Triaged Status in nvidia-graphics-drivers-440 package in Ubuntu: Triaged Status in nvidia-graphics-drivers-460 package in Ubuntu: Triaged Status in nvidia-graphics-drivers-470 package in Ubuntu: Triaged Status in nvidia-graphics-drivers-510 package in Ubuntu: Triaged Bug description: [Impact] The Nvidia driver corrupts and/or forgets its textures when resuming from suspend, by design. Documented here: https://www.khronos.org/registry/OpenGL/extensions/NV/NV_robustness_video_memory_purge.txt Although it's so awkward to implement everywhere that realistically compositors will never support it fully. Instead we're waiting for an Nvidia driver fix. *NOTE* that this is actually not a common problem because the system must be using Nvidia as the primary GPU to be affected. So generally only desktop users will encounter the bug, not laptops. And even then, only desktops that use suspend/resume and VT switching may trigger it, if ever. Even in development the bug cannot be reproduced reliably. [Workarounds] * Always log into a Xorg session and if corruption occurs then type: Alt+F2, R, Enter * https://download.nvidia.com/XFree86/Linux-x86_64/510.54/README/powermanagement.html#PreserveAllVide719f0 [Test Plan] [Where problems could occur] [Original Bug Report] I recently installed ubuntu 20.04 on my computer, and I am running into an issue when I do the following: * Login with a user on desktop * Select switch user, and login as second user * Switch user again, and return to original user At this point, text and icons in the menubar / sidebar are corrupted. Text and icons in normal windows appear correctly. I have attached a screenshot of what this looks like. Screenshots: https://imgur.com/a/3ZFDLMc ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-28.32-generic 5.4.30 Uname: Linux 5.4.0-28-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..09.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:09:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 440.64 Fri Feb 21 01:17:26 UTC 2020 GCC version: ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun May 3 18:12:45 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP104 [GeForce GTX 1070] [10de:1b81] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. GP104 [GeForce GTX 1070] [1043:85a0] InstallationDate: Installed on 2020-05-03 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: Gigabyte Technology Co., Ltd. AX370-Gaming ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-28-generic root=/dev/mapper/vgubuntu-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F3 dmi.board.asset.tag: Default string dmi.board.name: AX370-Gaming-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: se1 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF3:bd06/19/2017:svnGigabyteTechnologyCo.,Ltd.:pnAX370-Gaming:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnAX370-Gaming-CF:rvrse1:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: AX370-Gaming dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz N/A version.l
[Kernel-packages] [Bug 1960460] Re: Fails to import ZFS rpool during boot
** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** No longer affects: linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1960460 Title: Fails to import ZFS rpool during boot Status in systemd package in Ubuntu: New Bug description: Fresh install using 20220202 Daily ISO with ZFS + Encryption selected from the installer The system ends up in busybox after entering the unlock key. Here is a part of the logs captured from the screen, the complete log can be found as an attachement: find: /dev/zvol/: No such file or directory /init: line 971: dirname: not found BusyBox v1.30.1 (Ubuntu 1:1.30.1-7ubuntu2) multi-call binary. Usage: basename FILE [SUFFIX] Strip directory path and SUFFIX from FILE Please unlock disk keystore-:_ Key load error: Failed to open key material file: No such file or directory Command: mount -o zfsutil -t zfs rpool/ROOT/ubuntu_ui69ph /root// Message: filesystem 'rpool/ROOT/ubuntu_ui69ph' can not be mounted: Permission denied filesystem 'rpool/ROOT/ubuntu_ui69ph' can not be mounted: Permission denied mount: mounting rpool/ROOT/ubuntu_u169ph on /root// failed: Permission denied Error: 1 Failed to mount rpool/ROOT/ubuntu ui69ph on /root//. Manually mount the filesystem and exit. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1960460/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1876632] Re: [nvidia] Corrupted/missing shell textures when switching users or resuming from suspend
** Also affects: nvidia-graphics-drivers-510 (Ubuntu) Importance: Undecided Status: New ** Changed in: nvidia-graphics-drivers-510 (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-460 in Ubuntu. https://bugs.launchpad.net/bugs/1876632 Title: [nvidia] Corrupted/missing shell textures when switching users or resuming from suspend Status in GNOME Shell: Unknown Status in Mutter: Unknown Status in gnome-shell package in Ubuntu: Triaged Status in mutter package in Ubuntu: Triaged Status in nvidia-graphics-drivers-440 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-460 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-470 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-510 package in Ubuntu: Confirmed Bug description: I recently installed ubuntu 20.04 on my computer, and I am running into an issue when I do the following: * Login with a user on desktop * Select switch user, and login as second user * Switch user again, and return to original user At this point, text and icons in the menubar / sidebar are corrupted. Text and icons in normal windows appear correctly. I have attached a screenshot of what this looks like. Screenshots: https://imgur.com/a/3ZFDLMc ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: xorg 1:7.7+19ubuntu14 ProcVersionSignature: Ubuntu 5.4.0-28.32-generic 5.4.30 Uname: Linux 5.4.0-28-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia .proc.driver.nvidia.gpus..09.00.0: Error: [Errno 21] Is a directory: '/proc/driver/nvidia/gpus/:09:00.0' .proc.driver.nvidia.registry: Binary: "" .proc.driver.nvidia.suspend: suspend hibernate resume .proc.driver.nvidia.suspend_depth: default modeset uvm .proc.driver.nvidia.version: NVRM version: NVIDIA UNIX x86_64 Kernel Module 440.64 Fri Feb 21 01:17:26 UTC 2020 GCC version: ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CasperMD5CheckResult: skip CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun May 3 18:12:45 2020 DistUpgraded: Fresh install DistroCodename: focal DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: NVIDIA Corporation GP104 [GeForce GTX 1070] [10de:1b81] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. GP104 [GeForce GTX 1070] [1043:85a0] InstallationDate: Installed on 2020-05-03 (0 days ago) InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) MachineType: Gigabyte Technology Co., Ltd. AX370-Gaming ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-28-generic root=/dev/mapper/vgubuntu-root ro quiet splash vt.handoff=7 SourcePackage: xorg Symptom: display UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/19/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F3 dmi.board.asset.tag: Default string dmi.board.name: AX370-Gaming-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: se1 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF3:bd06/19/2017:svnGigabyteTechnologyCo.,Ltd.:pnAX370-Gaming:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnAX370-Gaming-CF:rvrse1:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: AX370-Gaming dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2 version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.4-2ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 20.0.4-2ubuntu1 version.nvidia-graphics-drivers: nvidia-graphics-drivers-* N/A version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20200226-1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1 To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1876632/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1962162] [NEW] Suspend/Resume/Reboot fails with 5.15 Kernel
Public bug reported: Suspend/Resume and don't seem to work with the shipped 5.15 Kernel. When rebooting or shutting down the system gets stuck at "Reached Target: System Poweroff" or "Reboot". Installing the mainline kernel 5.16.11 fixes this issue and the system is able to properly shutdown/reboot and suspend. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-18-generic 5.15.0-18.18 ProcVersionSignature: Ubuntu 5.15.0-18.18-generic 5.15.12 Uname: Linux 5.15.0-18-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu78 Architecture: amd64 CasperMD5CheckResult: pass Date: Thu Feb 24 12:53:52 2022 HibernationDevice: RESUME=none InstallationDate: Installed on 2022-02-23 (0 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220223) MachineType: Micro-Star International Co., Ltd. MS-7D29 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/BOOT/ubuntu_m9rbzq@/vmlinuz-5.15.0-18-generic root=ZFS=rpool/ROOT/ubuntu_m9rbzq ro PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.15.0-18-generic N/A linux-backports-modules-5.15.0-18-generic N/A linux-firmware 20220217.git6342082c-0ubuntu1 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/21/2022 dmi.bios.release: 5.24 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: 1.24 dmi.board.asset.tag: Default string dmi.board.name: MEG Z690I UNIFY (MS-7D29) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvr1.24:bd01/21/2022:br5.24:svnMicro-StarInternationalCo.,Ltd.:pnMS-7D29:pvr1.0:rvnMicro-StarInternationalCo.,Ltd.:rnMEGZ690IUNIFY(MS-7D29):rvr1.0:cvnMicro-StarInternationalCo.,Ltd.:ct3:cvr1.0:skuDefaultstring: dmi.product.family: Default string dmi.product.name: MS-7D29 dmi.product.sku: Default string dmi.product.version: 1.0 dmi.sys.vendor: Micro-Star International Co., Ltd. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1962162 Title: Suspend/Resume/Reboot fails with 5.15 Kernel Status in linux package in Ubuntu: New Bug description: Suspend/Resume and don't seem to work with the shipped 5.15 Kernel. When rebooting or shutting down the system gets stuck at "Reached Target: System Poweroff" or "Reboot". Installing the mainline kernel 5.16.11 fixes this issue and the system is able to properly shutdown/reboot and suspend. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-18-generic 5.15.0-18.18 ProcVersionSignature: Ubuntu 5.15.0-18.18-generic 5.15.12 Uname: Linux 5.15.0-18-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu78 Architecture: amd64 CasperMD5CheckResult: pass Date: Thu Feb 24 12:53:52 2022 HibernationDevice: RESUME=none InstallationDate: Installed on 2022-02-23 (0 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220223) MachineType: Micro-Star International Co., Ltd. MS-7D29 ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 EFI VGA ProcKernelCmdLine: BOOT_IMAGE=/BOOT/ubuntu_m9rbzq@/vmlinuz-5.15.0-18-generic root=ZFS=rpool/ROOT/ubuntu_m9rbzq ro PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.15.0-18-generic N/A linux-backports-modules-5.15.0-18-generic N/A linux-firmware 20220217.git6342082c-0ubuntu1 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/21/2022 dmi.bios.release: 5.24 dmi.bios.vendor: American Megatrends International, LLC. dmi.bios.version: 1.24 dmi.board.asset.tag: Default string dmi.board.name: MEG Z690I UNIFY (MS-7D29) dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: 1.0 dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInternational,LLC.:bvr1.24:bd01/21/2022:br5.24:svnMicro-StarInternationalCo.,Ltd.:pnMS-7D29:
[Kernel-packages] [Bug 1964440] Re: 5.15.0-22: No console displayed on EFI systems
Was able to reproduce this issue on two of my machines aswell. Both were installed in EFI Mode. Booting the older 5.15.0-18 kernel or 5.16 mainline kernels work around this issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1964440 Title: 5.15.0-22: No console displayed on EFI systems Status in linux package in Ubuntu: Confirmed Bug description: DISCLAIMER: This is my second-ever bug report. Apologies in advance for any missing or inaccurate info. I am willing to troubleshoot and supply more/better info as needed. PROBLEM DESCRIPTION: After upgrading the kernel on my Ubuntu 22.04 Server test system from 5.15.0-18 to 5.15.0-22, I see absolutely no console output on my display past the grub menu. I can give the system a few seconds to finish booting, log in blindly and watch the activity LEDs on e.g. the network interface as i run a ping or similar. I can also log in remotely via SSH, and/or use a serial console. So the system definitely does boot. But my actual display/screen shows no console output. ENVIRONMENT: (Output gathered via SSH while display was showing no output) testuser@testserver:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu Jammy Jellyfish (development branch) Release: 22.04 Codename: jammy testuser@testserver:~$ uname -a Linux testserver 5.15.0-22-generic #22-Ubuntu SMP Tue Feb 8 10:16:30 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux This was initially discovered on an Ubuntu Server VM running in EFI mode on VirtualBox 6.1.32. System was installed with the daily 'jammy-live-server-amd64.iso' image from 2022-03-07, fully upgraded as of 2022-03-10. Switching Graphics Controller in Virtualbox does not help, nor does 'nomodeset' or 'noacpi'. I am able to reproduce the issue on real hardware and with different physical graphics cards. Similar symptoms can also be observed in Ubuntu Desktop (still using EFI) by attempting to switch to tty with CTRL + ALT + F[3-6], or by taking note of the missing plymouth screen during boot. Systems installed/booted in legacy BIOS mode (both Server and Desktop) do not appear to be affected. I have tried reinstalling on both virtual and hardware platforms, with same result before and after upgrading the kernel. HOW TO REPRODUCE - Ubuntu Server: - Boot existing Ubuntu Server EFI installation with 5.15.0-18 and observe console output - Set GRUB_TIMEOUT_STYLE=menu and GRUB_TIMEOUT=10 in /etc/default/grub (to enable rollback) - Run update-grub - Run sudo apt full-upgrade and watch linux version 5.15.0-22 get installed - Reboot and observe your display (no console output will be shown after grub) HOW TO REPRODUCE - Ubuntu Desktop: - Download Ubuntu 22.04 Desktop daily ISO - Write ISO to USB - Boot from USB in EFI mode - Install system - Run sudo apt full-upgrade and upgrade linux* to kernel 5.15.0-22 - Reboot and observe missing plymouth screen during boot - Wait for graphical login screen to appear - Press CTRL + ALT + F[3-6] (screen will go black and/or freeze) - Press CTRL + ALT + F1 (screen will unfreeze and/or return to gdm greeter) WORKAROUNDS: If you still have 5.15.0-18 or earlier installed, select it in Grub. and/or install mainline kernel 5.16.11+ (for testing only - will not work if you have Secure Boot enabled). Alternatively, re-install/convert/boot your system to boot in legacy BIOS mode. --- ProblemType: Bug AlsaVersion: Advanced Linux Sound Architecture Driver Version k5.15.0-22-generic. AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.20.11-0ubuntu78 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D1c', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: Card0.Amixer.info: Error: [Errno 2] No such file or directory: 'amixer' Card0.Amixer.values: Error: [Errno 2] No such file or directory: 'amixer' CasperMD5CheckResult: pass DistroRelease: Ubuntu 22.04 InstallationDate: Installed on 2022-03-10 (0 days ago) InstallationMedia: Ubuntu-Server 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220307) IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lsusb: Bus 001 Device 002: ID 80ee:0021 VirtualBox USB Tablet Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Lsusb-t: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/12p, 12M |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M MachineType: innotek GmbH VirtualBox Package: linux (not installed) ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-22-generic root=UUID=8fe5
[Kernel-packages] [Bug 1964305] Re: [nvidia] Missing VTs in kernel 5.15.0-22-generic (but 5.15.0-18-generic works)
Was able to reproduce this bug on two of my machines aswell. Both were using Nvidia 3000 Series graphics. Booting the 5.15.0-18 Kernel or 5.16 Mainline Kernels didn't have this issue. Seems like only 5.15.0-22 is affected by this bug. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-470 in Ubuntu. https://bugs.launchpad.net/bugs/1964305 Title: [nvidia] Missing VTs in kernel 5.15.0-22-generic (but 5.15.0-18-generic works) Status in linux package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-470 package in Ubuntu: Confirmed Status in nvidia-graphics-drivers-510 package in Ubuntu: Confirmed Bug description: Missing VTs in kernel 5.15.0-22-generic (but 5.15.0-18-generic works). Steps to reproduce: 1. Boot Ubuntu. 2. Press Ctrl+Alt+F4. Expected: VT to be displayed Observed: Monitor turns off. Notes: * This failure only happens in 5.15.0-22-generic. Kernel version 5.15.0-18-generic works fine. * I am currently using the nvidia-470 driver in case that's relevant. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-22-generic 5.15.0-22.22 ProcVersionSignature: Ubuntu 5.15.0-22.22-generic 5.15.19 Uname: Linux 5.15.0-22-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu78 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-id', '/dev/snd/by-path', '/dev/snd/controlC1', '/dev/snd/pcmC1D0p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: pass Date: Wed Mar 9 14:33:12 2022 InstallationDate: Installed on 2021-11-05 (123 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20211103) MachineType: Intel(R) Client Systems NUC9i7QNX ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-22-generic root=UUID=70e2069c-a553-4c6d-abfc-c65e52cb3b43 ro quiet splash nvidia-drm.modeset=1 vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.15.0-22-generic N/A linux-backports-modules-5.15.0-22-generic N/A linux-firmware 20220302.gitee0667aa-0ubuntu1 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 11/25/2019 dmi.bios.release: 5.13 dmi.bios.vendor: Intel Corp. dmi.bios.version: QXCFL579.0034.2019.1125.1436 dmi.board.name: NUC9i7QNB dmi.board.vendor: Intel Corporation dmi.board.version: K49245-402 dmi.chassis.type: 35 dmi.chassis.vendor: Intel Corporation dmi.chassis.version: 2.0 dmi.ec.firmware.release: 24.33 dmi.modalias: dmi:bvnIntelCorp.:bvrQXCFL579.0034.2019.1125.1436:bd11/25/2019:br5.13:efr24.33:svnIntel(R)ClientSystems:pnNUC9i7QNX:pvrK49244-403:rvnIntelCorporation:rnNUC9i7QNB:rvrK49245-402:cvnIntelCorporation:ct35:cvr2.0:skuBXNUC9i7QNX: dmi.product.family: QN dmi.product.name: NUC9i7QNX dmi.product.sku: BXNUC9i7QNX dmi.product.version: K49244-403 dmi.sys.vendor: Intel(R) Client Systems To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1964305/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1971712] Re: Add support for Intel DG2
The new firmware package works fine with the 6.0 kernel, it loads the GuC and HuC Firmware, as seen below: [4.691687] i915 :03:00.0: [drm] Finished loading DMC firmware i915/dg2_dmc_ver2_06.bin (v2.6) [4.702309] i915 :03:00.0: [drm] GuC firmware i915/dg2_guc_70.1.2.bin version 70. I presume the firmware updates are a preparation for the i915/drm backports to the 6.0-oem kernel? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1971712 Title: Add support for Intel DG2 Status in linux-firmware package in Ubuntu: Fix Released Status in linux-oem-5.17 package in Ubuntu: Invalid Status in linux-oem-6.0 package in Ubuntu: Invalid Status in mesa package in Ubuntu: Fix Released Status in linux-firmware source package in Jammy: Fix Committed Status in linux-oem-5.17 source package in Jammy: Won't Fix Status in linux-oem-6.0 source package in Jammy: Confirmed Status in mesa source package in Jammy: Fix Released Status in linux-firmware source package in Kinetic: Fix Committed Bug description: [Impact] Ubuntu 22.04 does not support Intel DG2-based hw which is released later this year. [Fix] Mesa: needs a bunch of patches backported to 22.0.x, will be upstream in 22.1 or 22.2 kernel: oem-6.0 plus a bunch of backports from 6.1/drm-tip firmare: updates to i915 DMC, GuC [Test case] Boot a system with a DG2-based GPU, check that native graphics drivers are used. Test mesa also on gen9-gen12 GPU's to verify that there are no regressions even though the backports are for DG2. [What could go wrong] The Mesa patches are only for DG2 support, should not affect other hardware at all. The kernel driver is in a separate package which isn't installed by default except preinstall machines with this hardware. So other users are not affected. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1971712/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1971712] Re: Add support for Intel DG2
Is this not going to happen? > kernel: oem-6.0 plus a bunch of backports from 6.1/drm-tip -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1971712 Title: Add support for Intel DG2 Status in linux-firmware package in Ubuntu: Fix Released Status in linux-oem-5.17 package in Ubuntu: Invalid Status in linux-oem-6.0 package in Ubuntu: Invalid Status in mesa package in Ubuntu: Fix Released Status in linux-firmware source package in Jammy: Fix Committed Status in linux-oem-5.17 source package in Jammy: Won't Fix Status in linux-oem-6.0 source package in Jammy: Confirmed Status in mesa source package in Jammy: Fix Released Status in linux-firmware source package in Kinetic: Fix Committed Bug description: [Impact] Ubuntu 22.04 does not support Intel DG2-based hw which is released later this year. [Fix] Mesa: needs a bunch of patches backported to 22.0.x, will be upstream in 22.1 or 22.2 kernel: oem-6.0 plus a bunch of backports from 6.1/drm-tip firmare: updates to i915 DMC, GuC [Test case] Boot a system with a DG2-based GPU, check that native graphics drivers are used. Test mesa also on gen9-gen12 GPU's to verify that there are no regressions even though the backports are for DG2. [What could go wrong] The Mesa patches are only for DG2 support, should not affect other hardware at all. The kernel driver is in a separate package which isn't installed by default except preinstall machines with this hardware. So other users are not affected. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1971712/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1971712] Re: Add support for Intel DG2
Are there any plans for providing an i915 DKMS Module with DG2 Support for oem-5.17? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.17 in Ubuntu. https://bugs.launchpad.net/bugs/1971712 Title: Add support for Intel DG2 Status in linux-oem-5.17 package in Ubuntu: Invalid Status in mesa package in Ubuntu: Fix Released Status in linux-oem-5.17 source package in Jammy: Won't Fix Status in mesa source package in Jammy: Fix Released Bug description: [Impact] Ubuntu 22.04 does not support Intel DG2-based hw which is released later this year. [Fix] Mesa: needs a bunch of patches backported to 22.0.x, will be upstream in 22.1 or 22.2 kernel: use a dkms provided by Intel and integrated in the OEM kernel source, the module will be shipped in a separate modules package [Test case] Boot a system with a DG2-based GPU, check that native graphics drivers are used. Test mesa also on gen9-gen12 GPU's to verify that there are no regressions even though the backports are for DG2. [What could go wrong] The Mesa patches are only for DG2 support, should not affect other hardware at all. The kernel driver is in a separate package which isn't installed by default except preinstall machines with this hardware. So other users are not affected. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-oem-5.17/+bug/1971712/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1992532] [NEW] Enable DG2 graphics support
Public bug reported: DG2 graphics support should be enabled by default, dmesg outputs the following: i915 :67:00.0: Your graphics device 56a5 is not properly supported by the driver in this kernel version. To force driver probe anyway, use i915.force_probe=56a5 module parameter or CONFIG_DRM_I915_FORCE_PROBE=56a5 configuration option, or (recommended) check for kernel updates. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-oem-22.04b 6.0.0.1005.5 ProcVersionSignature: Ubuntu 6.0.0-1005.5-oem 6.0.0 Uname: Linux 6.0.0-1005-oem x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: pass Date: Wed Oct 12 01:29:02 2022 InstallationDate: Installed on 2022-10-11 (0 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: linux-meta-oem-6.0 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: linux-oem-6.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy package-from-proposed ** Package changed: linux-meta-oem-6.0 (Ubuntu) => linux-oem-6.0 (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta-oem-6.0 in Ubuntu. https://bugs.launchpad.net/bugs/1992532 Title: Enable DG2 graphics support Status in linux-oem-6.0 package in Ubuntu: New Bug description: DG2 graphics support should be enabled by default, dmesg outputs the following: i915 :67:00.0: Your graphics device 56a5 is not properly supported by the driver in this kernel version. To force driver probe anyway, use i915.force_probe=56a5 module parameter or CONFIG_DRM_I915_FORCE_PROBE=56a5 configuration option, or (recommended) check for kernel updates. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-oem-22.04b 6.0.0.1005.5 ProcVersionSignature: Ubuntu 6.0.0-1005.5-oem 6.0.0 Uname: Linux 6.0.0-1005-oem x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: pass Date: Wed Oct 12 01:29:02 2022 InstallationDate: Installed on 2022-10-11 (0 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: linux-meta-oem-6.0 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-oem-6.0/+bug/1992532/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1992667] [NEW] Application windows invisible (on DG2 graphics)
Public bug reported: When using GNOME Shell with Wayland, all application windows become invisible from time to time. This usually happens right after starting GNOME Shell for the first time or after having a VRAM intensive application open, such as a game. I have installed the latest linux-oem-6.0 kernel and manually enabled support for DG2 graphics by passing the i915.force_probe parameter with the PCIe ID of the graphics card. I have attached a screenshot of the described behavior below. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: gnome-shell 42.4-0ubuntu0.22.04.1 ProcVersionSignature: Ubuntu 6.0.0-1005.5-oem 6.0.0 Uname: Linux 6.0.0-1005-oem x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: pass Date: Wed Oct 12 17:23:40 2022 DisplayManager: gdm3 InstallationDate: Installed on 2022-10-11 (1 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash RelatedPackageVersions: mutter-common 42.2-0ubuntu1 SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: gnome-shell (Ubuntu) Importance: Undecided Status: New ** Affects: linux-oem-6.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy ** Attachment added: "Screenshot of the described bug" https://bugs.launchpad.net/bugs/1992667/+attachment/5623541/+files/gnome_shell_invisible_windows.png ** Also affects: linux-oem-6.0 (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-6.0 in Ubuntu. https://bugs.launchpad.net/bugs/1992667 Title: Application windows invisible (on DG2 graphics) Status in gnome-shell package in Ubuntu: New Status in linux-oem-6.0 package in Ubuntu: New Bug description: When using GNOME Shell with Wayland, all application windows become invisible from time to time. This usually happens right after starting GNOME Shell for the first time or after having a VRAM intensive application open, such as a game. I have installed the latest linux-oem-6.0 kernel and manually enabled support for DG2 graphics by passing the i915.force_probe parameter with the PCIe ID of the graphics card. I have attached a screenshot of the described behavior below. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: gnome-shell 42.4-0ubuntu0.22.04.1 ProcVersionSignature: Ubuntu 6.0.0-1005.5-oem 6.0.0 Uname: Linux 6.0.0-1005-oem x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: pass Date: Wed Oct 12 17:23:40 2022 DisplayManager: gdm3 InstallationDate: Installed on 2022-10-11 (1 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash RelatedPackageVersions: mutter-common 42.2-0ubuntu1 SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1992667/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1971712] Re: Add support for Intel DG2
Looking forward to linux-oem-6.0 support. Got an A380 and A770 here for testing purposes. It seems like the current proposed build of the linux-oem-6.0 kernel still has some issues in this regard. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.17 in Ubuntu. https://bugs.launchpad.net/bugs/1971712 Title: Add support for Intel DG2 Status in linux-oem-5.17 package in Ubuntu: Invalid Status in linux-oem-6.0 package in Ubuntu: Invalid Status in mesa package in Ubuntu: Fix Released Status in linux-oem-5.17 source package in Jammy: Won't Fix Status in linux-oem-6.0 source package in Jammy: In Progress Status in mesa source package in Jammy: Fix Released Bug description: [Impact] Ubuntu 22.04 does not support Intel DG2-based hw which is released later this year. [Fix] Mesa: needs a bunch of patches backported to 22.0.x, will be upstream in 22.1 or 22.2 kernel: use a dkms provided by Intel and integrated in the OEM kernel source, the module will be shipped in a separate modules package [Test case] Boot a system with a DG2-based GPU, check that native graphics drivers are used. Test mesa also on gen9-gen12 GPU's to verify that there are no regressions even though the backports are for DG2. [What could go wrong] The Mesa patches are only for DG2 support, should not affect other hardware at all. The kernel driver is in a separate package which isn't installed by default except preinstall machines with this hardware. So other users are not affected. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-oem-5.17/+bug/1971712/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1992667] Re: Application windows invisible (on DG2 graphics)
I've managed to reproduce this bug on an Arc A380 and Arc A770 GPU. I've attached the requested lspci output for the A770. Ubuntu 22.04 has already received a mesa update with backported patches for DG2 support: https://bugs.launchpad.net/ubuntu/+source/mesa/+bug/1971712 I haven't tried 22.10 yet, but I will do so in the coming days. ** Attachment added: "lspci.txt" https://bugs.launchpad.net/ubuntu/+source/linux-oem-6.0/+bug/1992667/+attachment/5623860/+files/lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-6.0 in Ubuntu. https://bugs.launchpad.net/bugs/1992667 Title: Application windows invisible (on DG2 graphics) Status in linux-oem-6.0 package in Ubuntu: Incomplete Status in mesa package in Ubuntu: Incomplete Bug description: When using GNOME Shell with Wayland, all application windows become invisible from time to time. This usually happens right after starting GNOME Shell for the first time or after having a VRAM intensive application open, such as a game. I have installed the latest linux-oem-6.0 kernel and manually enabled support for DG2 graphics by passing the i915.force_probe parameter with the PCIe ID of the graphics card. I have attached a screenshot of the described behavior below. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: gnome-shell 42.4-0ubuntu0.22.04.1 ProcVersionSignature: Ubuntu 6.0.0-1005.5-oem 6.0.0 Uname: Linux 6.0.0-1005-oem x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: pass Date: Wed Oct 12 17:23:40 2022 DisplayManager: gdm3 InstallationDate: Installed on 2022-10-11 (1 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash RelatedPackageVersions: mutter-common 42.2-0ubuntu1 SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-oem-6.0/+bug/1992667/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1992667] Re: Application windows invisible (on DG2 graphics)
Hi Timo, Upgrading to Mesa 22.2 seems to resolve this issue. Using the packages from the intel repository (https://dgpu-docs.intel.com/installation- guides/ubuntu/ubuntu-jammy-arc.html) works as well. Is it planned to release the updated mesa 22.2 packages to Ubuntu 22.04? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-6.0 in Ubuntu. https://bugs.launchpad.net/bugs/1992667 Title: Application windows invisible (on DG2 graphics) Status in linux-oem-6.0 package in Ubuntu: Incomplete Status in mesa package in Ubuntu: Incomplete Status in linux-oem-6.0 source package in Jammy: New Status in mesa source package in Jammy: New Bug description: When using GNOME Shell with Wayland, all application windows become invisible from time to time. This usually happens right after starting GNOME Shell for the first time or after having a VRAM intensive application open, such as a game. I have installed the latest linux-oem-6.0 kernel and manually enabled support for DG2 graphics by passing the i915.force_probe parameter with the PCIe ID of the graphics card. I have attached a screenshot of the described behavior below. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: gnome-shell 42.4-0ubuntu0.22.04.1 ProcVersionSignature: Ubuntu 6.0.0-1005.5-oem 6.0.0 Uname: Linux 6.0.0-1005-oem x86_64 ApportVersion: 2.20.11-0ubuntu82.1 Architecture: amd64 CasperMD5CheckResult: pass Date: Wed Oct 12 17:23:40 2022 DisplayManager: gdm3 InstallationDate: Installed on 2022-10-11 (1 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Release amd64 (20220419) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash RelatedPackageVersions: mutter-common 42.2-0ubuntu1 SourcePackage: gnome-shell UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-oem-6.0/+bug/1992667/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1994025] [NEW] Suspend or hibernate fails when using Arc Alchemist (DG2) graphics
Public bug reported: The computer is unable to suspend or hibernate, when a DG2 graphics card is installed and in-use in the system. When attempting to suspend or hibernate the system will turn off its screens for a few seconds after which they will light up again. I am using the latest linux-oem-6.0 kernel and the mesa 22.2 packages from the canonical-x/x-staging ppa. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-oem-22.04b 6.0.0.1005.5 ProcVersionSignature: Ubuntu 6.0.0-1005.5-oem 6.0.0 Uname: Linux 6.0.0-1005-oem x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Oct 24 12:07:27 2022 InstallationDate: Installed on 2022-02-23 (242 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220223) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: linux-meta-oem-6.0 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: linux-oem-6.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug jammy wayland-session ** Package changed: linux-meta-oem-6.0 (Ubuntu) => linux-oem-6.0 (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-meta-oem-6.0 in Ubuntu. https://bugs.launchpad.net/bugs/1994025 Title: Suspend or hibernate fails when using Arc Alchemist (DG2) graphics Status in linux-oem-6.0 package in Ubuntu: New Bug description: The computer is unable to suspend or hibernate, when a DG2 graphics card is installed and in-use in the system. When attempting to suspend or hibernate the system will turn off its screens for a few seconds after which they will light up again. I am using the latest linux-oem-6.0 kernel and the mesa 22.2 packages from the canonical-x/x-staging ppa. ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-oem-22.04b 6.0.0.1005.5 ProcVersionSignature: Ubuntu 6.0.0-1005.5-oem 6.0.0 Uname: Linux 6.0.0-1005-oem x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu82.2 Architecture: amd64 CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Mon Oct 24 12:07:27 2022 InstallationDate: Installed on 2022-02-23 (242 days ago) InstallationMedia: Ubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20220223) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: linux-meta-oem-6.0 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-oem-6.0/+bug/1994025/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1994157] [NEW] Chromium and Firefox snap won't launch with Linux 6.0.0-1006-oem Kernel
Private bug reported: When using the latest Linux 6.0.0-1006-oem Kernel, Firefox and Chromium won't open anymore. ** Affects: linux-oem-6.0 (Ubuntu) Importance: Undecided Status: Invalid ** Changed in: linux-oem-6.0 (Ubuntu) Status: New => Invalid ** Information type changed from Public to Private -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-6.0 in Ubuntu. https://bugs.launchpad.net/bugs/1994157 Title: Chromium and Firefox snap won't launch with Linux 6.0.0-1006-oem Kernel Status in linux-oem-6.0 package in Ubuntu: Invalid Bug description: When using the latest Linux 6.0.0-1006-oem Kernel, Firefox and Chromium won't open anymore. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-oem-6.0/+bug/1994157/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1906476] Re: PANIC at zfs_znode.c:335:zfs_znode_sa_init() // VERIFY(0 == sa_handle_get_from_db(zfsvfs->z_os, db, zp, SA_HDL_SHARED, &zp->z_sa_hdl)) failed
The latest Ubuntu 21.10 install still comes with zfs-kmod-2.0.3, which prevents the system from booting in the first place. Installing zfs-dkms via the recovery mode, which updates the zfs-kmod to version 2.0.6, fixed the issue for me. I hope that the release image of Ubuntu 21.10 will ship with zfs- kmod-2.0.6 in the kernel by default. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to zfs-linux in Ubuntu. https://bugs.launchpad.net/bugs/1906476 Title: PANIC at zfs_znode.c:335:zfs_znode_sa_init() // VERIFY(0 == sa_handle_get_from_db(zfsvfs->z_os, db, zp, SA_HDL_SHARED, &zp->z_sa_hdl)) failed Status in Native ZFS for Linux: New Status in zfs-linux package in Ubuntu: Fix Released Status in zfs-linux source package in Impish: Fix Released Bug description: Since today while running Ubuntu 21.04 Hirsute I started getting a ZFS panic in the kernel log which was also hanging Disk I/O for all Chrome/Electron Apps. I have narrowed down a few important notes: - It does not happen with module version 0.8.4-1ubuntu11 built and included with 5.8.0-29-generic - It was happening when using zfs-dkms 0.8.4-1ubuntu16 built with DKMS on the same kernel and also on 5.8.18-acso (a custom kernel). - For whatever reason multiple Chrome/Electron apps were affected, specifically Discord, Chrome and Mattermost. In all cases they seem (but I was unable to strace the processes so it was a bit hard ot confirm 100% but by deduction from /proc/PID/fd and the hanging ls) they seem hung trying to open files in their 'Cache' directory, e.g. ~/.cache/google-chrome/Default/Cache and ~/.config/Mattermost/Cache .. while the issue was going on I could not list that directory either "ls" would just hang. - Once I removed zfs-dkms only to revert to the kernel built-in version it immediately worked without changing anything, removing files, etc. - It happened over multiple reboots and kernels every time, all my Chrome apps weren't working but for whatever reason nothing else seemed affected. - It would log a series of spl_panic dumps into kern.log that look like this: Dec 2 12:36:42 optane kernel: [ 72.857033] VERIFY(0 == sa_handle_get_from_db(zfsvfs->z_os, db, zp, SA_HDL_SHARED, &zp->z_sa_hdl)) failed Dec 2 12:36:42 optane kernel: [ 72.857036] PANIC at zfs_znode.c:335:zfs_znode_sa_init() I could only find one other google reference to this issue, with 2 other users reporting the same error but on 20.04 here: https://github.com/openzfs/zfs/issues/10971 - I was not experiencing the issue on 0.8.4-1ubuntu14 and fairly sure it was working on 0.8.4-1ubuntu15 but broken after upgrade to 0.8.4-1ubuntu16. I will reinstall those zfs-dkms versions to verify that. There were a few originating call stacks but the first one I hit was Call Trace: dump_stack+0x74/0x95 spl_dumpstack+0x29/0x2b [spl] spl_panic+0xd4/0xfc [spl] ? sa_cache_constructor+0x27/0x50 [zfs] ? _cond_resched+0x19/0x40 ? mutex_lock+0x12/0x40 ? dmu_buf_set_user_ie+0x54/0x80 [zfs] zfs_znode_sa_init+0xe0/0xf0 [zfs] zfs_znode_alloc+0x101/0x700 [zfs] ? arc_buf_fill+0x270/0xd30 [zfs] ? __cv_init+0x42/0x60 [spl] ? dnode_cons+0x28f/0x2a0 [zfs] ? _cond_resched+0x19/0x40 ? _cond_resched+0x19/0x40 ? mutex_lock+0x12/0x40 ? aggsum_add+0x153/0x170 [zfs] ? spl_kmem_alloc_impl+0xd8/0x110 [spl] ? arc_space_consume+0x54/0xe0 [zfs] ? dbuf_read+0x4a0/0xb50 [zfs] ? _cond_resched+0x19/0x40 ? mutex_lock+0x12/0x40 ? dnode_rele_and_unlock+0x5a/0xc0 [zfs] ? _cond_resched+0x19/0x40 ? mutex_lock+0x12/0x40 ? dmu_object_info_from_dnode+0x84/0xb0 [zfs] zfs_zget+0x1c3/0x270 [zfs] ? dmu_buf_rele+0x3a/0x40 [zfs] zfs_dirent_lock+0x349/0x680 [zfs] zfs_dirlook+0x90/0x2a0 [zfs] ? zfs_zaccess+0x10c/0x480 [zfs] zfs_lookup+0x202/0x3b0 [zfs] zpl_lookup+0xca/0x1e0 [zfs] path_openat+0x6a2/0xfe0 do_filp_open+0x9b/0x110 ? __check_object_size+0xdb/0x1b0 ? __alloc_fd+0x46/0x170 do_sys_openat2+0x217/0x2d0 ? do_sys_openat2+0x217/0x2d0 do_sys_open+0x59/0x80 __x64_sys_openat+0x20/0x30 To manage notifications about this bug go to: https://bugs.launchpad.net/zfs/+bug/1906476/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
