[Kernel-packages] [Bug 1865130] Re: [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
edit to post #10: my problem was the same as in original posting - just to avoid confusion -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1865130 Title: [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! Status in linux-firmware package in Ubuntu: Confirmed Bug description: === SRU Justification === [Impact] Firmware update of radeon/oland_rlc.bin breaks some radeon cards. [Fix] Revert the new firmware. [Regression Potential] Low. The old firmware has been used for a long time. === Original Bug Report === when trying > DRI_PRIME=1 glxgears , the result in dmesg is as following [ +0.91] radeon :01:00.0: WB enabled [ +0.02] radeon :01:00.0: fence driver on ring 0 use gpu addr 0x8c00 and cpu addr 0x8ac2d26f [ +0.01] radeon :01:00.0: fence driver on ring 1 use gpu addr 0x8c04 and cpu addr 0xa848de20 [ +0.01] radeon :01:00.0: fence driver on ring 2 use gpu addr 0x8c08 and cpu addr 0x1e4494a9 [ +0.01] radeon :01:00.0: fence driver on ring 3 use gpu addr 0x8c0c and cpu addr 0x98a9748e [ +0.01] radeon :01:00.0: fence driver on ring 4 use gpu addr 0x8c10 and cpu addr 0xb6ff734d [ +0.000212] radeon :01:00.0: fence driver on ring 5 use gpu addr 0x00075a18 and cpu addr 0x6b4da526 [ +0.100566] radeon :01:00.0: failed VCE resume (-110). [ +0.179115] [drm] ring test on 0 succeeded in 1 usecs [ +0.04] [drm] ring test on 1 succeeded in 1 usecs [ +0.04] [drm] ring test on 2 succeeded in 1 usecs [ +0.06] [drm] ring test on 3 succeeded in 3 usecs [ +0.04] [drm] ring test on 4 succeeded in 3 usecs [ +1.171892] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015643] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015509] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015572] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015514] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015405] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015442] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015416] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015388] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015379] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +0.019924] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!! [ +0.40] radeon :01:00.0: failed initializing UVD (-1). [ +0.60] [drm] ib test on ring 0 succeeded in 0 usecs [ +0.51] [drm] ib test on ring 1 succeeded in 0 usecs [ +0.32] [drm] ib test on ring 2 succeeded in 0 usecs [ +0.52] [drm] ib test on ring 3 succeeded in 0 usecs [ +0.29] [drm] ib test on ring 4 succeeded in 0 usecs Also it affects the boot time. the used OpenGL renderer is: "OpenGL renderer string: AMD OLAND (DRM 2.50.0, 5.3.0-40-generic, LLVM 9.0.0)" ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 Uname: Linux 5.3.0-40-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.9-0ubuntu7.11 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: communitheme:ubuntu:GNOME Date: Fri Feb 28 11:50:50 2020 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: bcmwl, 6.30.223.271+bdcom, 5.3.0-28-generic, x86_64: installed bcmwl, 6.30.223.271+bdcom, 5.3.0-40-generic, x86_64: installed virtualbox, 5.2.34, 5.3.0-28-generic, x86_64: installed virtualbox, 5.2.34, 5.3.0-40-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Lenovo 4th Gen Core Processor Integrated Graphics Controller [17aa:3801] Subsystem: Lenovo Mars [Radeon HD 8670A/8670M/8750M] [17aa:3801] InstallationDate: Installed on 2019-09-17 (163 days ago) InstallationMedia: Ubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) MachineType: LENOVO 20238 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=385a4174-5cfe-49c9-b4c3-9e64a251d432 ro SourcePackage: xorg Symptom:
[Kernel-packages] [Bug 1865130] Re: [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!!
I can confirm that reverting to linux-firmware:amd64=1.173.12 with kernel 5.3.0-40-generic on Xubuntu 18.04.4 solved my problem. Workaround with kernel parameter "radeon.modeset=0 rd.driver.blacklist=radeon" removed error messages but caused fan to work constantly when watching e. g. youtube in chrome. Using Samsung ativbook 730U3E with display controller: Advanced Micro Devices, Inc. [AMD/ATI] Mars [Radeon HD 8730M] Regards Peter -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1865130 Title: [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! Status in linux-firmware package in Ubuntu: Confirmed Bug description: === SRU Justification === [Impact] Firmware update of radeon/oland_rlc.bin breaks some radeon cards. [Fix] Revert the new firmware. [Regression Potential] Low. The old firmware has been used for a long time. === Original Bug Report === when trying > DRI_PRIME=1 glxgears , the result in dmesg is as following [ +0.91] radeon :01:00.0: WB enabled [ +0.02] radeon :01:00.0: fence driver on ring 0 use gpu addr 0x8c00 and cpu addr 0x8ac2d26f [ +0.01] radeon :01:00.0: fence driver on ring 1 use gpu addr 0x8c04 and cpu addr 0xa848de20 [ +0.01] radeon :01:00.0: fence driver on ring 2 use gpu addr 0x8c08 and cpu addr 0x1e4494a9 [ +0.01] radeon :01:00.0: fence driver on ring 3 use gpu addr 0x8c0c and cpu addr 0x98a9748e [ +0.01] radeon :01:00.0: fence driver on ring 4 use gpu addr 0x8c10 and cpu addr 0xb6ff734d [ +0.000212] radeon :01:00.0: fence driver on ring 5 use gpu addr 0x00075a18 and cpu addr 0x6b4da526 [ +0.100566] radeon :01:00.0: failed VCE resume (-110). [ +0.179115] [drm] ring test on 0 succeeded in 1 usecs [ +0.04] [drm] ring test on 1 succeeded in 1 usecs [ +0.04] [drm] ring test on 2 succeeded in 1 usecs [ +0.06] [drm] ring test on 3 succeeded in 3 usecs [ +0.04] [drm] ring test on 4 succeeded in 3 usecs [ +1.171892] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015643] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015509] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015572] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015514] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015405] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015442] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015416] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015388] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +1.015379] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, trying to reset the VCPU!!! [ +0.019924] [drm:uvd_v1_0_start [radeon]] *ERROR* UVD not responding, giving up!!! [ +0.40] radeon :01:00.0: failed initializing UVD (-1). [ +0.60] [drm] ib test on ring 0 succeeded in 0 usecs [ +0.51] [drm] ib test on ring 1 succeeded in 0 usecs [ +0.32] [drm] ib test on ring 2 succeeded in 0 usecs [ +0.52] [drm] ib test on ring 3 succeeded in 0 usecs [ +0.29] [drm] ib test on ring 4 succeeded in 0 usecs Also it affects the boot time. the used OpenGL renderer is: "OpenGL renderer string: AMD OLAND (DRM 2.50.0, 5.3.0-40-generic, LLVM 9.0.0)" ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 Uname: Linux 5.3.0-40-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.9-0ubuntu7.11 Architecture: amd64 BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log' CompositorRunning: None CurrentDesktop: communitheme:ubuntu:GNOME Date: Fri Feb 28 11:50:50 2020 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu DkmsStatus: bcmwl, 6.30.223.271+bdcom, 5.3.0-28-generic, x86_64: installed bcmwl, 6.30.223.271+bdcom, 5.3.0-40-generic, x86_64: installed virtualbox, 5.2.34, 5.3.0-28-generic, x86_64: installed virtualbox, 5.2.34, 5.3.0-40-generic, x86_64: installed ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Lenovo 4th Gen Core Processor Integrated Graphics Controller [17aa:3801] Subsystem: Lenovo Mars [Radeon HD 8
[Kernel-packages] [Bug 1570820] Re: Suspend failure
Same effect here as you described (Samsung Ativbook 7 730U3E with Intel/ATI graphic). Xubuntu 15.10 with all the updates worked. After upgrading to 16.04 suspend stopped working. Due to some issues with systemd during the upgrade I did a fresh install of 16.04 Xubuntu but ran into the same suspend problem. I hope you can fix this in the official Kernel as I'd like to stick to the "original" an 16.04 is a LTS version. I guess petersaints gave enough information (thanks for this!) - I just want to push this with my vote :-) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1570820 Title: Suspend failure Status in linux package in Ubuntu: Triaged Bug description: My laptop fails to suspend. The screen turns off, but the fans continue to run (and it may actually get hotter). I wait and wait, and nothing happens (the power indicator remains always on). I tried suspending using the GUI, pressing the power button, closing the lid, and even through the terminal with the "pm-suspend" command. Nothing worked. Suspend worked fine on Ubuntu 15.10 and older releases, but since I upgraded to 16.04 I'm unable to put it to sleep. In fact, I had an old 4.2 kernel installed from Wily. I booted into it and it suspended and then resumed flawlessly, so it really seems to be a kernel related bug. I'll gladly perform any testing procedures that you may need to try to identify what the problem may be. I really hope that you are able to fix this soon, even if it will probably after the final release. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-18-generic 4.4.0-18.34 ProcVersionSignature: Ubuntu 4.4.0-18.34-generic 4.4.6 Uname: Linux 4.4.0-18-generic x86_64 ApportVersion: 2.20.1-0ubuntu2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: pedro 2579 F pulseaudio CurrentDesktop: GNOME Date: Fri Apr 15 12:39:05 2016 HibernationDevice: RESUME=UUID=761da9d5-d078-4fb5-a4fc-eff7de723b18 InstallationDate: Installed on 2015-10-27 (170 days ago) InstallationMedia: Ubuntu-GNOME 15.10 "Wily Werewolf" - Release amd64 (20151021) MachineType: SAMSUNG ELECTRONICS CO., LTD. 870Z5E/880Z5E/680Z5E ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-18-generic.efi.signed root=UUID=8d1874c5-ce9f-481e-8d2a-ce85da5cd7fe ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.4.0-18-generic N/A linux-backports-modules-4.4.0-18-generic N/A linux-firmware1.157 SourcePackage: linux UpgradeStatus: Upgraded to xenial on 2016-04-09 (5 days ago) dmi.bios.date: 04/21/2014 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P05ADH.017.140421.SH dmi.board.asset.tag: No Asset Tag dmi.board.name: NP870Z5E-X01PT dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SEC_SW_REVISION_1234567890ABCD dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP05ADH.017.140421.SH:bd04/21/2014:svnSAMSUNGELECTRONICSCO.,LTD.:pn870Z5E/880Z5E/680Z5E:pvrP05ADH:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP870Z5E-X01PT:rvrSEC_SW_REVISION_1234567890ABCD:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 870Z5E/880Z5E/680Z5E dmi.product.version: P05ADH dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1570820/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1380824] Re: Backlight not working on Samsung ATIV 8 laptop
Same effect on my Samsung Ativ Book 7 (intel i7 intel/ati hybrid) neither radeon, nor fglrx is working. Kernels 3.13.0-37, 3.16.0-23/24 don't work. Everything worked unter Xubuntu 14.04 (under 14.04 acpi_backlight=vendor even turned on brightness sensor) Under 14.10 ONLY brightness sensor works and cannot be turned off. Brightnesse keys tell me they are working by notification bubbles but screen stays at 100%. xbacklight does not decrease brightess although it tells me it it running at 50% (screen still 100%) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1380824 Title: Backlight not working on Samsung ATIV 8 laptop Status in “linux” package in Ubuntu: Incomplete Bug description: I have a 15" Samsung ATIV Book 8 laptop, np870z5e model from 2013. It features an Intel core-i7 cpu, and integrated Intel Hd4000 video card and also an ATI Radeon video card. According to Backlight debugging page[1], my case is "Backlight control does not work, but there are entries in /sys/class/backlight. " What works: Fn-F2, Fn-F3 keys works(Brightness down, brightness up), shows the brightness notification dialog, and also the /sys/class/backlight/intel_backlight/actual_brightness file changes too. It has no physical effect. It does not have any physical effect (brightness does not change), up until the brightness notification is zero (no bar on it), then the display switches off. raising the brightness switches the display back to the same brightness it was, and still not have any effect to the brightness. Semi works: Powering on the laptop starts with about 60% brightness. If I suspend-resume the laptop, it results 100% brightness. If I unplug the power cord (if it was plugged in when the laptop started), then it results 100% brightness. If I plug the power cord (if it was unplugged when the laptop started), then it results 100% brightness. I can't change the 100% brightness afterwards. What I have tried: a) xorg.conf file: # Fix Backlight issue Section "Device" Identifier "card0" Driver "intel" Option "Backlight" "intel_backlight" BusID "PCI:0:2:0" EndSection No effect. b) Kernel boot parameter in /etc/defaults/grub GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video.use_native_backlight=1" GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video.use_native_backlight=0" GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_backlight=vendor" GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video.use_bios_initial_backlight=0" I tried each one, with a power off - power on cycle, but none of it had any effect. I doublechecked it (after boot), with cat /proc/cmdline. Changing the /sys/class/backlight/intel_backlight/brightness values, has no physical effect, although the file do change (checked with cat). I'm desperately trying to solve this issue, because the screen is always at full brightness, and burns my eyes out. (300cd/m2 screen is extremely bright). Any help is much appreciated. [1]: https://wiki.ubuntu.com/Kernel/Debugging/Backlight ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-21-generic 3.16.0-21.28 ProcVersionSignature: Ubuntu 3.16.0-21.28-generic 3.16.4 Uname: Linux 3.16.0-21-generic x86_64 ApportVersion: 2.14.7-0ubuntu5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: lama 2528 F pulseaudio CurrentDesktop: Unity Date: Tue Oct 14 00:38:17 2014 InstallationDate: Installed on 2014-01-13 (273 days ago) InstallationMedia: Ubuntu 13.10 "Saucy Salamander" - Release amd64 (20131016.1) MachineType: SAMSUNG ELECTRONICS CO., LTD. 870Z5E/880Z5E/680Z5E ProcFB: 0 inteldrmfb 1 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-21-generic.efi.signed root=UUID=ba121a25-b094-49f5-96bf-ade769938060 ro quiet splash video.use_bios_initial_backlight=0 vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.16.0-21-generic N/A linux-backports-modules-3.16.0-21-generic N/A linux-firmware 1.135 SourcePackage: linux UpgradeStatus: Upgraded to utopic on 2014-10-08 (5 days ago) dmi.bios.date: 06/04/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P02ADH.008.130604.SK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP870Z5E-X01HU dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SEC_SW_REVISION_1234567890ABCD dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP02ADH.008.130604.SK:bd06/04/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn870Z5E/880Z5E/680Z5E:pvrP02ADH:
[Kernel-packages] [Bug 1566302] Re: Ubuntu 16.04: Suspend freezes the system after upgrade to linux image 4.4.0-16
I just managed to get the 4.4.0-24-generic kernel to a proper suspend and resume for several times. As mentioned in the several bugs reported here, it seems to affect users with Intel/ATI hybrid graphics. I disabled the ATI part by editing /etc/default/grub line to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.modeset=0" and a "sudo update-grub". After this my laptop (Samsung Ativ Book 730U3E) suspends with the official Kernel. Finally! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1566302 Title: Ubuntu 16.04: Suspend freezes the system after upgrade to linux image 4.4.0-16 Status in linux package in Ubuntu: Won't Fix Bug description: I'm using ubuntu 16.04 on a XPS 15 9550. Suspend/resume worked flawlessly with linux image 4.4.0-15, and after standard upgrade yesterday (5/04/2016) which installed image 4.4.0-16, the system freezes when attempting a suspend. I get no response from the system (nor keyboard, nor screen, nor touchpad), but it gets very hot, so that it must be running something. Booting with 4.4.0-15 makes the suspend to work perfectly. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-extra-4.4.0-16-generic 4.4.0-16.32 ProcVersionSignature: Ubuntu 4.4.0-15.31-generic 4.4.6 Uname: Linux 4.4.0-15-generic x86_64 ApportVersion: 2.20.1-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: macias 1770 F pulseaudio CurrentDesktop: X-Cinnamon Date: Tue Apr 5 14:56:17 2016 HibernationDevice: RESUME=UUID=4180adfa-3852-4a96-86b4-f3696448c743 InstallationDate: Installed on 2016-03-07 (28 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Alpha amd64 (20160304) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f3:21d5 Elan Microelectronics Corp. Bus 001 Device 002: ID 0a5c:6410 Broadcom Corp. Bus 001 Device 004: ID 1bcf:2b95 Sunplus Innovation Technology Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. XPS 15 9550 ProcEnviron: LANGUAGE=es_ES PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=es_ES.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-15-generic.efi.signed root=UUID=673f4658-75f8-4c01-bcd8-0af860269699 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.4.0-15-generic N/A linux-backports-modules-4.4.0-15-generic N/A linux-firmware1.157 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 01/25/2016 dmi.bios.vendor: Dell Inc. dmi.bios.version: 01.01.19 dmi.board.name: 0N7TVV dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 9 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr01.01.19:bd01/25/2016:svnDellInc.:pnXPS159550:pvr:rvnDellInc.:rn0N7TVV:rvrA00:cvnDellInc.:ct9:cvr: dmi.product.name: XPS 15 9550 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1566302/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1589139] Re: [HP Pavilion dv6-6b52sl Entertainment Notebook PC] No suspend on Ubuntu 16.04
I just managed to get the 4.4.0-24-generic kernel to a proper suspend and resume for several times. As mentioned in the several bugs reported here, it seems to affect users with Intel/ATI hybrid graphics. I disabled the ATI part by editing /etc/default/grub line to: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.modeset=0" and a "sudo update-grub". After this my laptop (Samsung Ativ Book 730U3E) suspends with the official Kernel. Finally! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1589139 Title: [HP Pavilion dv6-6b52sl Entertainment Notebook PC] No suspend on Ubuntu 16.04 Status in linux package in Ubuntu: Confirmed Bug description: When i try to suspend the system the screen turns off, the PC becomes really hot(the fan won't stop working) and i'm not able to do anything after this. The only option is to hard-press the power button to turn it off. ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-22-generic 4.4.0-22.40 ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8 Uname: Linux 4.4.0-22-generic x86_64 NonfreeKernelModules: wl ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: isgjevori 1922 F pulseaudio CurrentDesktop: Unity Date: Sat Jun 4 21:16:29 2016 HibernationDevice: RESUME=UUID=adbe72f6-5838-4cbc-90fa-8976d46f10af InstallationDate: Installed on 2016-04-21 (43 days ago) InstallationMedia: Ubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1) MachineType: Hewlett-Packard HP Pavilion dv6 Notebook PC ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic root=UUID=03a1d74a-7657-4df3-a6cc-b1adc563b16f ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.4.0-22-generic N/A linux-backports-modules-4.4.0-22-generic N/A linux-firmware1.157 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/10/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.01 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 17FD dmi.board.vendor: Hewlett-Packard dmi.board.version: 10.31 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnHewlett-Packard:bvrF.01:bd08/10/2011:svnHewlett-Packard:pnHPPaviliondv6NotebookPC:pvr05931120461620100:rvnHewlett-Packard:rn17FD:rvr10.31:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion dv6 Notebook PC dmi.product.version: 05931120461620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1589139/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1170885] Re: Samsung Laptop support module doesn't load for Samsung NP900X3C-A06AU
Another Laptop here (Samsung Ativ Book 7 - type: 730U3E-X04DE). It's not on the list of hardware known to brick in UEFI mode. So I installed it in UEFI mode. Samsung-laptop is not loaded here as well so some minimal things are not working properly (keyboard illumination, fan-control, WiFi switch). I'd like to know if it's worth waiting for a reactivation of the kernel module in UEFI mode or if I should switch my installation to BIOS (CSM) mode. Thanks for any information on this! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1170885 Title: Samsung Laptop support module doesn't load for Samsung NP900X3C-A06AU Status in “linux” package in Ubuntu: Opinion Bug description: Similarly to Bug #1012284 "Samsung Laptop support module refuse to load for Samsung 900X3C" I'm trying to load "samsung_laptop" in to the kernel so that I can access functionality provided under /sys/devices/platform/samsung (like keyboard backlight control). When doing a modprobe I get "No such device": # modprobe samsung-laptop FATAL: Error inserting samsung_laptop (/lib/modules/3.5.0-27-generic/kernel/drivers/platform/x86/samsung-laptop.ko): No such device I also tried a mainline build, as per https://wiki.ubuntu.com/KernelMainlineBuilds , and got the same result: # modprobe samsung-laptop FATAL: Error inserting samsung_laptop (/lib/modules/3.9.0-999-generic/kernel/drivers/platform/x86/samsung-laptop.ko): No such device # uname -a Linux sammy.lyte 3.9.0-999-generic #201304190456 SMP Fri Apr 19 08:57:39 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux I'm not sure if this is a regression from the previous fix or simply slightly different hardware. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: linux-image-generic 3.5.0.27.43 ProcVersionSignature: Ubuntu 3.5.0-27.46-generic 3.5.7.7 Uname: Linux 3.5.0-27-generic x86_64 ApportVersion: 2.6.1-0ubuntu10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: dschoen2693 F pulseaudio CRDA: Error: [Errno 2] No such file or directory: 'iw' Date: Sat Apr 20 15:12:20 2013 HibernationDevice: RESUME=UUID=de097eb6-c8eb-47b8-b020-f209468bcb36 InstallationDate: Installed on 2012-12-10 (130 days ago) InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X3D/900X4C/900X4D MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-27-generic root=/dev/mapper/sammy-root ro rootflags=subvol=@ RelatedPackageVersions: linux-restricted-modules-3.5.0-27-generic N/A linux-backports-modules-3.5.0-27-generic N/A linux-firmware1.95 SourcePackage: linux UpgradeStatus: Upgraded to quantal on 2013-03-09 (42 days ago) dmi.bios.date: 09/19/2012 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: P02ABK dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: NP900X3C-A06AU dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrP02ABK:bd09/19/2012:svnSAMSUNGELECTRONICSCO.,LTD.:pn900X3C/900X3D/900X4C/900X4D:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP900X3C-A06AU:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 900X3C/900X3D/900X4C/900X4D dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1170885/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
