[Kernel-packages] [Bug 1860182] Re: zpool scrub malfunction after kernel upgrade
I just updated and the problem is fixed. Thanks everyone. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to zfs-linux in Ubuntu. https://bugs.launchpad.net/bugs/1860182 Title: zpool scrub malfunction after kernel upgrade Status in zfs-linux package in Ubuntu: In Progress Status in zfs-linux source package in Bionic: Fix Released Bug description: == SRU Request [BIONIC] == The HWE kernel on bionic provides zfs 0.8.1 driver which includes an improved scrub however, the progress stats reported by the kernel are incompatible to the 0.7.x zfs driver. == Fix == Use the new zfs 8.x pool_scan_stat_t extra fields to calculate the scan progress when using zfs 8.x kernel drivers. Add detection of the kernel module version and use an approximation to the zfs 0.8.0 progress and rate reporting for newer kernels. For 0.7.5 we can pass the larger 8.x port_scan_stat_t to 0.7.5 zfs w/o problems and ignore these new fields and continue to use the 0.7.5 rate calculations. == Test == Install the HWE kernel on Bionic, create some large ZFS pools and populate with a lot of data. Issue: sudo zpool scrub poolname and then look at the progress using sudo zpool status Without the fix, the progress stats are incorrect. With the fix the duration and rate stats as a fairly good approximation of the progress. Since the newer 0.8.x zfs does scanning now in two phases the older zfs tools will only report accurate stats for phase #2 of the scan to keep it roughly compatible with the 0.7.x zfs utils output. == Regression Potential == This is a userspace reporting fix so the zpool status output is only affected by this fix when doing a scrub, so the impact of this fix is very small and limited. I ran a zpool scrub prior to upgrading my 18.04 to the latest HWE kernel (5.3.0-26-generic #28~18.04.1-Ubuntu) and it ran properly: eric@eric-8700K:~$ zpool status pool: storagepool1 state: ONLINE scan: scrub repaired 1M in 4h21m with 0 errors on Fri Jan 17 07:01:24 2020 config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 I ran zpool scrub after upgrading the kernel and rebooting, and now it fails to work properly. It appeared to finish in about 5 minutes but did not, and says it is going slow: eric@eric-8700K:~$ sudo zpool status pool: storagepool1 state: ONLINE scan: scrub in progress since Fri Jan 17 15:32:07 2020 1.89T scanned out of 1.89T at 589M/s, (scan is slow, no estimated time) 0B repaired, 100.00% done config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 errors: No known data errors ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: zfsutils-linux 0.7.5-1ubuntu16.7 ProcVersionSignature: Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13 Uname: Linux 5.3.0-26-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Jan 17 16:22:01 2020 InstallationDate: Installed on 2018-03-07 (681 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) SourcePackage: zfs-linux UpgradeStatus: Upgraded to bionic on 2018-08-02 (533 days ago) modified.conffile..etc.sudoers.d.zfs: [inaccessible: [Errno 13] Permission denied: '/etc/sudoers.d/zfs'] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1860182/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1860182] Re: zpool scrub malfunction after kernel upgrade
Thanks for identifying and fixing the bug! I'll test it when it lands. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to zfs-linux in Ubuntu. https://bugs.launchpad.net/bugs/1860182 Title: zpool scrub malfunction after kernel upgrade Status in zfs-linux package in Ubuntu: In Progress Bug description: == SRU Request [BIONIC] == The HWE kernel on bionic provides zfs 0.8.1 driver which includes an improved scrub however, the progress stats reported by the kernel are incompatible to the 0.7.x zfs driver. == Fix == Use the new zfs 8.x pool_scan_stat_t extra fields to calculate the scan progress when using zfs 8.x kernel drivers. Add detection of the kernel module version and use an approximation to the zfs 0.8.0 progress and rate reporting for newer kernels. For 0.7.5 we can pass the larger 8.x port_scan_stat_t to 0.7.5 zfs w/o problems and ignore these new fields and continue to use the 0.7.5 rate calculations. == Test == Install the HWE kernel on Bionic, create some large ZFS pools and populate with a lot of data. Issue: sudo zpool scrub poolname and then look at the progress using sudo zpool status Without the fix, the progress stats are incorrect. With the fix the duration and rate stats as a fairly good approximation of the progress. Since the newer 0.8.x zfs does scanning now in two phases the older zfs tools will only report accurate stats for phase #2 of the scan to keep it roughly compatible with the 0.7.x zfs utils output. == Regression Potential == This is a userspace reporting fix so the zpool status output is only affected by this fix when doing a scrub, so the impact of this fix is very small and limited. I ran a zpool scrub prior to upgrading my 18.04 to the latest HWE kernel (5.3.0-26-generic #28~18.04.1-Ubuntu) and it ran properly: eric@eric-8700K:~$ zpool status pool: storagepool1 state: ONLINE scan: scrub repaired 1M in 4h21m with 0 errors on Fri Jan 17 07:01:24 2020 config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 I ran zpool scrub after upgrading the kernel and rebooting, and now it fails to work properly. It appeared to finish in about 5 minutes but did not, and says it is going slow: eric@eric-8700K:~$ sudo zpool status pool: storagepool1 state: ONLINE scan: scrub in progress since Fri Jan 17 15:32:07 2020 1.89T scanned out of 1.89T at 589M/s, (scan is slow, no estimated time) 0B repaired, 100.00% done config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 errors: No known data errors ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: zfsutils-linux 0.7.5-1ubuntu16.7 ProcVersionSignature: Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13 Uname: Linux 5.3.0-26-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Jan 17 16:22:01 2020 InstallationDate: Installed on 2018-03-07 (681 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) SourcePackage: zfs-linux UpgradeStatus: Upgraded to bionic on 2018-08-02 (533 days ago) modified.conffile..etc.sudoers.d.zfs: [inaccessible: [Errno 13] Permission denied: '/etc/sudoers.d/zfs'] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1860182/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1860182] Re: zpool scrub malfunction after kernel upgrade
Yes, @gerald-drouillard, that's what I found. It will complete, but the progress and details reported by `zpool status` are incorrect. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to zfs-linux in Ubuntu. https://bugs.launchpad.net/bugs/1860182 Title: zpool scrub malfunction after kernel upgrade Status in zfs-linux package in Ubuntu: Triaged Bug description: I ran a zpool scrub prior to upgrading my 18.04 to the latest HWE kernel (5.3.0-26-generic #28~18.04.1-Ubuntu) and it ran properly: eric@eric-8700K:~$ zpool status pool: storagepool1 state: ONLINE scan: scrub repaired 1M in 4h21m with 0 errors on Fri Jan 17 07:01:24 2020 config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 I ran zpool scrub after upgrading the kernel and rebooting, and now it fails to work properly. It appeared to finish in about 5 minutes but did not, and says it is going slow: eric@eric-8700K:~$ sudo zpool status pool: storagepool1 state: ONLINE scan: scrub in progress since Fri Jan 17 15:32:07 2020 1.89T scanned out of 1.89T at 589M/s, (scan is slow, no estimated time) 0B repaired, 100.00% done config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 errors: No known data errors ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: zfsutils-linux 0.7.5-1ubuntu16.7 ProcVersionSignature: Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13 Uname: Linux 5.3.0-26-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Jan 17 16:22:01 2020 InstallationDate: Installed on 2018-03-07 (681 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) SourcePackage: zfs-linux UpgradeStatus: Upgraded to bionic on 2018-08-02 (533 days ago) modified.conffile..etc.sudoers.d.zfs: [inaccessible: [Errno 13] Permission denied: '/etc/sudoers.d/zfs'] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1860182/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1860182] [NEW] zpool scrub malfunction after kernel upgrade
Public bug reported: I ran a zpool scrub prior to upgrading my 18.04 to the latest HWE kernel (5.3.0-26-generic #28~18.04.1-Ubuntu) and it ran properly: eric@eric-8700K:~$ zpool status pool: storagepool1 state: ONLINE scan: scrub repaired 1M in 4h21m with 0 errors on Fri Jan 17 07:01:24 2020 config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 I ran zpool scrub after upgrading the kernel and rebooting, and now it fails to work properly. It appeared to finish in about 5 minutes but did not, and says it is going slow: eric@eric-8700K:~$ sudo zpool status pool: storagepool1 state: ONLINE scan: scrub in progress since Fri Jan 17 15:32:07 2020 1.89T scanned out of 1.89T at 589M/s, (scan is slow, no estimated time) 0B repaired, 100.00% done config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 errors: No known data errors ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: zfsutils-linux 0.7.5-1ubuntu16.7 ProcVersionSignature: Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13 Uname: Linux 5.3.0-26-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Jan 17 16:22:01 2020 InstallationDate: Installed on 2018-03-07 (681 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) SourcePackage: zfs-linux UpgradeStatus: Upgraded to bionic on 2018-08-02 (533 days ago) modified.conffile..etc.sudoers.d.zfs: [inaccessible: [Errno 13] Permission denied: '/etc/sudoers.d/zfs'] ** Affects: zfs-linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bionic wayland-session -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to zfs-linux in Ubuntu. https://bugs.launchpad.net/bugs/1860182 Title: zpool scrub malfunction after kernel upgrade Status in zfs-linux package in Ubuntu: New Bug description: I ran a zpool scrub prior to upgrading my 18.04 to the latest HWE kernel (5.3.0-26-generic #28~18.04.1-Ubuntu) and it ran properly: eric@eric-8700K:~$ zpool status pool: storagepool1 state: ONLINE scan: scrub repaired 1M in 4h21m with 0 errors on Fri Jan 17 07:01:24 2020 config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 I ran zpool scrub after upgrading the kernel and rebooting, and now it fails to work properly. It appeared to finish in about 5 minutes but did not, and says it is going slow: eric@eric-8700K:~$ sudo zpool status pool: storagepool1 state: ONLINE scan: scrub in progress since Fri Jan 17 15:32:07 2020 1.89T scanned out of 1.89T at 589M/s, (scan is slow, no estimated time) 0B repaired, 100.00% done config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-
[Kernel-packages] [Bug 1860182] Re: zpool scrub malfunction after kernel upgrade
Note: rebooting and running the older kernel (4.15.0-74-generic #84-Ubuntu) results in the scrub proceeding at the expected rate. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to zfs-linux in Ubuntu. https://bugs.launchpad.net/bugs/1860182 Title: zpool scrub malfunction after kernel upgrade Status in zfs-linux package in Ubuntu: Triaged Bug description: I ran a zpool scrub prior to upgrading my 18.04 to the latest HWE kernel (5.3.0-26-generic #28~18.04.1-Ubuntu) and it ran properly: eric@eric-8700K:~$ zpool status pool: storagepool1 state: ONLINE scan: scrub repaired 1M in 4h21m with 0 errors on Fri Jan 17 07:01:24 2020 config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 I ran zpool scrub after upgrading the kernel and rebooting, and now it fails to work properly. It appeared to finish in about 5 minutes but did not, and says it is going slow: eric@eric-8700K:~$ sudo zpool status pool: storagepool1 state: ONLINE scan: scrub in progress since Fri Jan 17 15:32:07 2020 1.89T scanned out of 1.89T at 589M/s, (scan is slow, no estimated time) 0B repaired, 100.00% done config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 errors: No known data errors ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: zfsutils-linux 0.7.5-1ubuntu16.7 ProcVersionSignature: Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13 Uname: Linux 5.3.0-26-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Jan 17 16:22:01 2020 InstallationDate: Installed on 2018-03-07 (681 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) SourcePackage: zfs-linux UpgradeStatus: Upgraded to bionic on 2018-08-02 (533 days ago) modified.conffile..etc.sudoers.d.zfs: [inaccessible: [Errno 13] Permission denied: '/etc/sudoers.d/zfs'] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1860182/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1860182] Re: zpool scrub malfunction after kernel upgrade
Okay thank you. I will let the scrub run to completion on kernel 4.15, then I will reboot back into 5.3 and scrub again and will allow it time to see what happens. Even if it does end up completing, the text of zpool status was still incorrect: as it was running it said 5 mins remaining, then said it was 100% done, but also that scan is slow (as above, and below). scan: scrub in progress since Fri Jan 17 15:32:07 2020 1.89T scanned out of 1.89T at 589M/s, (scan is slow, no estimated time) 0B repaired, 100.00% done -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to zfs-linux in Ubuntu. https://bugs.launchpad.net/bugs/1860182 Title: zpool scrub malfunction after kernel upgrade Status in zfs-linux package in Ubuntu: Triaged Bug description: I ran a zpool scrub prior to upgrading my 18.04 to the latest HWE kernel (5.3.0-26-generic #28~18.04.1-Ubuntu) and it ran properly: eric@eric-8700K:~$ zpool status pool: storagepool1 state: ONLINE scan: scrub repaired 1M in 4h21m with 0 errors on Fri Jan 17 07:01:24 2020 config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 I ran zpool scrub after upgrading the kernel and rebooting, and now it fails to work properly. It appeared to finish in about 5 minutes but did not, and says it is going slow: eric@eric-8700K:~$ sudo zpool status pool: storagepool1 state: ONLINE scan: scrub in progress since Fri Jan 17 15:32:07 2020 1.89T scanned out of 1.89T at 589M/s, (scan is slow, no estimated time) 0B repaired, 100.00% done config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 errors: No known data errors ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: zfsutils-linux 0.7.5-1ubuntu16.7 ProcVersionSignature: Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13 Uname: Linux 5.3.0-26-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Jan 17 16:22:01 2020 InstallationDate: Installed on 2018-03-07 (681 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) SourcePackage: zfs-linux UpgradeStatus: Upgraded to bionic on 2018-08-02 (533 days ago) modified.conffile..etc.sudoers.d.zfs: [inaccessible: [Errno 13] Permission denied: '/etc/sudoers.d/zfs'] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1860182/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1860182] Re: zpool scrub malfunction after kernel upgrade
Update: The scrub back on 4.15 went as expected. I rebooted with 5.3 kernel and tried the scrub again. I saw the same behaviour: the scrub started, with a very fast rate and short time estimate (3-5 minutes), and then reached 100% after about that time. However it continued to say it was in progress, despite saying 100.00% done. It did not calcualte a time estimate, saying the rate was slow, however, it did complete after 3h36 (so fast than it used to on kernel 4.15). eric@eric-8700K:~$ zpool status pool: storagepool1 state: ONLINE scan: scrub repaired 0B in 3h36m with 0 errors on Sat Jan 18 14:50:16 2020 config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 errors: No known data errors I started a scrub again to see whether it was just the first time with this kernel, but again the % complete seems inaccurate, and the time remaining is definitely inaccurate (0h0m shortly after starting). So at the very least it is clear that zpool status is not accurately reporting the scrub process on kernel 5.3. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to zfs-linux in Ubuntu. https://bugs.launchpad.net/bugs/1860182 Title: zpool scrub malfunction after kernel upgrade Status in zfs-linux package in Ubuntu: Triaged Bug description: I ran a zpool scrub prior to upgrading my 18.04 to the latest HWE kernel (5.3.0-26-generic #28~18.04.1-Ubuntu) and it ran properly: eric@eric-8700K:~$ zpool status pool: storagepool1 state: ONLINE scan: scrub repaired 1M in 4h21m with 0 errors on Fri Jan 17 07:01:24 2020 config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 I ran zpool scrub after upgrading the kernel and rebooting, and now it fails to work properly. It appeared to finish in about 5 minutes but did not, and says it is going slow: eric@eric-8700K:~$ sudo zpool status pool: storagepool1 state: ONLINE scan: scrub in progress since Fri Jan 17 15:32:07 2020 1.89T scanned out of 1.89T at 589M/s, (scan is slow, no estimated time) 0B repaired, 100.00% done config: NAME STATE READ WRITE CKSUM storagepool1 ONLINE 0 0 0 mirror-0ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M3YFRVJ3 ONLINE 0 0 0 ata-ST2000DM001-1CH164_Z1E285A4 ONLINE 0 0 0 mirror-1ONLINE 0 0 0 ata-WDC_WD20EZRZ-00Z5HB0_WD-WCC4M1DSASHD ONLINE 0 0 0 ata-ST2000DM006-2DM164_Z4ZA3ENE ONLINE 0 0 0 errors: No known data errors ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: zfsutils-linux 0.7.5-1ubuntu16.7 ProcVersionSignature: Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13 Uname: Linux 5.3.0-26-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.9-0ubuntu7.9 Architecture: amd64 CurrentDesktop: ubuntu:GNOME Date: Fri Jan 17 16:22:01 2020 InstallationDate: Installed on 2018-03-07 (681 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20180105.1) SourcePackage: zfs-linux UpgradeStatus: Upgraded to bionic on 2018-08-02 (533 days ago) modified.conffile..etc.sudoers.d.zfs: [inaccessible: [Errno 13] Permission denied: '/etc/sudoers.d/zfs'] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/zfs-linux/+bug/1860182/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel
