[Kernel-packages] [Bug 1712384] [NEW] Nvidia driver (proprietary) fails to load after suspend
Public bug reported: I'm running Ubuntu 16.04.3 on Asus UX501JW. The laptop has the NVidia Optimus technology (Intel HD4600 and NVidia GM107M (GeForce GTX 960M)). The latest nvidia-384 driver and bumblebee are installed. After boot-up everything works fine. Until when the laptop gets suspended by closing the lid and then wakes up. Then the syslog is flooded with the below errors and the battery starts draining with 20W as the kernel is trying to reload the failing module. A reboot "cures" it (until the next suspend). Interestingly - when suspending via the keyboard "Zzz" button this does not happen. This error appeared recently, a month or a couple ago. I have been using this set-up for a few years and this wasn't a problem. The same problem happens with nvidia-375 and older drivers. Greatly appreciated if anybody could help me to shed some light on this. Aug 22 17:26:26 glorybook kernel: [46572.508501] pci_bus :02: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.508514] pci_bus :3b: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.508540] pci_bus :3c: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.508633] pci_bus :3d: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.710716] pcieport :00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring Aug 22 17:26:26 glorybook kernel: [46572.710795] pci_bus :3f: busn_res: can not insert [bus 3f-ff] under [bus 00-7e] (conflicts with (null) [bus 00-7e]) Aug 22 17:26:26 glorybook kernel: [46572.710813] pci :3f:00.0: [10de:139b] type 00 class 0x030200 Aug 22 17:26:26 glorybook kernel: [46572.710830] pci :3f:00.0: reg 0x10: [mem 0x-0x00ff] Aug 22 17:26:26 glorybook kernel: [46572.710844] pci :3f:00.0: reg 0x14: [mem 0x-0x0fff 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.710858] pci :3f:00.0: reg 0x1c: [mem 0x-0x01ff 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.710865] pci :3f:00.0: reg 0x24: [io 0x-0x007f] Aug 22 17:26:26 glorybook kernel: [46572.710874] pci :3f:00.0: reg 0x30: [mem 0x-0x0007 pref] Aug 22 17:26:26 glorybook kernel: [46572.710882] pci :3f:00.0: Max Payload Size set to 256 (was 128, max 256) Aug 22 17:26:26 glorybook kernel: [46572.711040] pci :3f:00.0: System wakeup disabled by ACPI Aug 22 17:26:26 glorybook kernel: [46572.711094] pcieport :00:01.0: PCI bridge to [bus 3f-ff] Aug 22 17:26:26 glorybook kernel: [46572.711101] pci_bus :3f: busn_res: [bus 3f-ff] end is updated to 3f Aug 22 17:26:26 glorybook kernel: [46572.711104] pci_bus :3f: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.711123] pci :3f:00.0: BAR 1: no space for [mem size 0x1000 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711125] pci :3f:00.0: BAR 1: failed to assign [mem size 0x1000 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711128] pci :3f:00.0: BAR 3: no space for [mem size 0x0200 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711129] pci :3f:00.0: BAR 3: failed to assign [mem size 0x0200 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711131] pci :3f:00.0: BAR 0: no space for [mem size 0x0100] Aug 22 17:26:26 glorybook kernel: [46572.711133] pci :3f:00.0: BAR 0: failed to assign [mem size 0x0100] Aug 22 17:26:26 glorybook kernel: [46572.711135] pci :3f:00.0: BAR 6: assigned [mem 0xed08-0xed0f pref] Aug 22 17:26:26 glorybook kernel: [46572.711137] pci :3f:00.0: BAR 5: assigned [io 0xe080-0xe0ff] Aug 22 17:26:26 glorybook kernel: [46572.738219] nvidia-nvlink: Nvlink Core is being initialized, major device number 243 Aug 22 17:26:26 glorybook kernel: [46572.739214] NVRM: This is a 64-bit BAR mapped above 4GB by the system Aug 22 17:26:26 glorybook kernel: [46572.739214] NVRM: BIOS or the Linux kernel, but the PCI bridge Aug 22 17:26:26 glorybook kernel: [46572.739214] NVRM: immediately upstream of this GPU does not define Aug 22 17:26:26 glorybook kernel: [46572.739214] NVRM: a matching prefetchable memory window. Aug 22 17:26:26 glorybook kernel: [46572.739216] NVRM: This may be due to a known Linux kernel bug. Please Aug 22 17:26:26 glorybook kernel: [46572.739216] NVRM: see the README section on 64-bit BARs for additional Aug 22 17:26:26 glorybook kernel: [46572.739216] NVRM: information. Aug 22 17:26:26 glorybook kernel: [46572.739224] nvidia: probe of :01:00.0 failed with error -1 Aug 22 17:26:26 glorybook kernel: [46572.739246] nvidia :3f:00.0: enabling device ( -> 0001) Aug 22 17:26:26 glorybook kernel: [46572.739445] NVRM: This PCI I/O region assigned to your NVIDIA device is invalid: Aug 22 17:26:26 glorybook kernel: [46572.739445] NVRM: BAR0 is 0M @ 0x0 (PCI::3f:00.0) Aug 22 17:26:26 glorybook kernel: [46572.739446] NVRM: The system BIOS may have misconfigured your GPU. Aug 22 17:26:26 glorybook kernel: [46572.73944
[Kernel-packages] [Bug 1712384] Re: Nvidia driver (proprietary) fails to load after suspend
I'm sorry, the 'apport-collect 1712384' command does not work. The "Collecting problem information" window appears, however the moving bar stops moving very soon and the window stops responding, while the python process is taking 100% CPU. Even after 5 minutes there is still no response (and still 100% CPU usage). Console output (after breaking the collection process): $ apport-collect 1712384 dpkg-query: no packages found matching linux ^CTraceback (most recent call last): File "/usr/share/apport/apport-gtk", line 597, in app.run_argv() File "/usr/lib/python2.7/dist-packages/apport/ui.py", line 658, in run_argv return self.run_update_report() File "/usr/lib/python2.7/dist-packages/apport/ui.py", line 547, in run_update_report self.collect_info(ignore_uninstalled=True) File "/usr/lib/python2.7/dist-packages/apport/ui.py", line 1028, in collect_info self.ui_pulse_info_collection_progress() File "/usr/share/apport/apport-gtk", line 463, in ui_pulse_info_collection_progress while Gtk.events_pending(): KeyboardInterrupt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712384 Title: Nvidia driver (proprietary) fails to load after suspend Status in linux package in Ubuntu: Confirmed Bug description: I'm running Ubuntu 16.04.3 on Asus UX501JW. The laptop has the NVidia Optimus technology (Intel HD4600 and NVidia GM107M (GeForce GTX 960M)). The latest nvidia-384 driver and bumblebee are installed. After boot-up everything works fine. Until when the laptop gets suspended by closing the lid and then wakes up. Then the syslog is flooded with the below errors and the battery starts draining with 20W as the kernel is trying to reload the failing module. A reboot "cures" it (until the next suspend). Interestingly - when suspending via the keyboard "Zzz" button this does not happen. This error appeared recently, a month or a couple ago. I have been using this set-up for a few years and this wasn't a problem. The same problem happens with nvidia-375 and older drivers. Greatly appreciated if anybody could help me to shed some light on this. Aug 22 17:26:26 glorybook kernel: [46572.508501] pci_bus :02: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.508514] pci_bus :3b: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.508540] pci_bus :3c: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.508633] pci_bus :3d: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.710716] pcieport :00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring Aug 22 17:26:26 glorybook kernel: [46572.710795] pci_bus :3f: busn_res: can not insert [bus 3f-ff] under [bus 00-7e] (conflicts with (null) [bus 00-7e]) Aug 22 17:26:26 glorybook kernel: [46572.710813] pci :3f:00.0: [10de:139b] type 00 class 0x030200 Aug 22 17:26:26 glorybook kernel: [46572.710830] pci :3f:00.0: reg 0x10: [mem 0x-0x00ff] Aug 22 17:26:26 glorybook kernel: [46572.710844] pci :3f:00.0: reg 0x14: [mem 0x-0x0fff 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.710858] pci :3f:00.0: reg 0x1c: [mem 0x-0x01ff 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.710865] pci :3f:00.0: reg 0x24: [io 0x-0x007f] Aug 22 17:26:26 glorybook kernel: [46572.710874] pci :3f:00.0: reg 0x30: [mem 0x-0x0007 pref] Aug 22 17:26:26 glorybook kernel: [46572.710882] pci :3f:00.0: Max Payload Size set to 256 (was 128, max 256) Aug 22 17:26:26 glorybook kernel: [46572.711040] pci :3f:00.0: System wakeup disabled by ACPI Aug 22 17:26:26 glorybook kernel: [46572.711094] pcieport :00:01.0: PCI bridge to [bus 3f-ff] Aug 22 17:26:26 glorybook kernel: [46572.711101] pci_bus :3f: busn_res: [bus 3f-ff] end is updated to 3f Aug 22 17:26:26 glorybook kernel: [46572.711104] pci_bus :3f: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.711123] pci :3f:00.0: BAR 1: no space for [mem size 0x1000 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711125] pci :3f:00.0: BAR 1: failed to assign [mem size 0x1000 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711128] pci :3f:00.0: BAR 3: no space for [mem size 0x0200 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711129] pci :3f:00.0: BAR 3: failed to assign [mem size 0x0200 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711131] pci :3f:00.0: BAR 0: no space for [mem size 0x0100] Aug 22 17:26:26 glorybook kernel: [46572.711133] pci :3f:00.0: BAR 0: failed to assign [mem size 0x0100] Aug 22 17:26:26 glorybook kernel: [46572.711135] pci :3f:00.0: BAR 6: assigned [mem 0xed08-0xed0f
[Kernel-packages] [Bug 1712384] Re: Nvidia driver (proprietary) fails to load after suspend
** Package changed: linux (Ubuntu) => nvidia-graphics-drivers-375 (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712384 Title: Nvidia driver (proprietary) fails to load after suspend Status in nvidia-graphics-drivers-375 package in Ubuntu: Confirmed Bug description: I'm running Ubuntu 16.04.3 on Asus UX501JW. The laptop has the NVidia Optimus technology (Intel HD4600 and NVidia GM107M (GeForce GTX 960M)). The latest nvidia-384 driver and bumblebee are installed. After boot-up everything works fine. Until when the laptop gets suspended by closing the lid and then wakes up. Then the syslog is flooded with the below errors and the battery starts draining with 20W as the kernel is trying to reload the failing module. A reboot "cures" it (until the next suspend). Interestingly - when suspending via the keyboard "Zzz" button this does not happen. This error appeared recently, a month or a couple ago. I have been using this set-up for a few years and this wasn't a problem. The same problem happens with nvidia-375 and older drivers. Greatly appreciated if anybody could help me to shed some light on this. Aug 22 17:26:26 glorybook kernel: [46572.508501] pci_bus :02: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.508514] pci_bus :3b: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.508540] pci_bus :3c: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.508633] pci_bus :3d: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.710716] pcieport :00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring Aug 22 17:26:26 glorybook kernel: [46572.710795] pci_bus :3f: busn_res: can not insert [bus 3f-ff] under [bus 00-7e] (conflicts with (null) [bus 00-7e]) Aug 22 17:26:26 glorybook kernel: [46572.710813] pci :3f:00.0: [10de:139b] type 00 class 0x030200 Aug 22 17:26:26 glorybook kernel: [46572.710830] pci :3f:00.0: reg 0x10: [mem 0x-0x00ff] Aug 22 17:26:26 glorybook kernel: [46572.710844] pci :3f:00.0: reg 0x14: [mem 0x-0x0fff 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.710858] pci :3f:00.0: reg 0x1c: [mem 0x-0x01ff 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.710865] pci :3f:00.0: reg 0x24: [io 0x-0x007f] Aug 22 17:26:26 glorybook kernel: [46572.710874] pci :3f:00.0: reg 0x30: [mem 0x-0x0007 pref] Aug 22 17:26:26 glorybook kernel: [46572.710882] pci :3f:00.0: Max Payload Size set to 256 (was 128, max 256) Aug 22 17:26:26 glorybook kernel: [46572.711040] pci :3f:00.0: System wakeup disabled by ACPI Aug 22 17:26:26 glorybook kernel: [46572.711094] pcieport :00:01.0: PCI bridge to [bus 3f-ff] Aug 22 17:26:26 glorybook kernel: [46572.711101] pci_bus :3f: busn_res: [bus 3f-ff] end is updated to 3f Aug 22 17:26:26 glorybook kernel: [46572.711104] pci_bus :3f: Allocating resources Aug 22 17:26:26 glorybook kernel: [46572.711123] pci :3f:00.0: BAR 1: no space for [mem size 0x1000 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711125] pci :3f:00.0: BAR 1: failed to assign [mem size 0x1000 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711128] pci :3f:00.0: BAR 3: no space for [mem size 0x0200 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711129] pci :3f:00.0: BAR 3: failed to assign [mem size 0x0200 64bit pref] Aug 22 17:26:26 glorybook kernel: [46572.711131] pci :3f:00.0: BAR 0: no space for [mem size 0x0100] Aug 22 17:26:26 glorybook kernel: [46572.711133] pci :3f:00.0: BAR 0: failed to assign [mem size 0x0100] Aug 22 17:26:26 glorybook kernel: [46572.711135] pci :3f:00.0: BAR 6: assigned [mem 0xed08-0xed0f pref] Aug 22 17:26:26 glorybook kernel: [46572.711137] pci :3f:00.0: BAR 5: assigned [io 0xe080-0xe0ff] Aug 22 17:26:26 glorybook kernel: [46572.738219] nvidia-nvlink: Nvlink Core is being initialized, major device number 243 Aug 22 17:26:26 glorybook kernel: [46572.739214] NVRM: This is a 64-bit BAR mapped above 4GB by the system Aug 22 17:26:26 glorybook kernel: [46572.739214] NVRM: BIOS or the Linux kernel, but the PCI bridge Aug 22 17:26:26 glorybook kernel: [46572.739214] NVRM: immediately upstream of this GPU does not define Aug 22 17:26:26 glorybook kernel: [46572.739214] NVRM: a matching prefetchable memory window. Aug 22 17:26:26 glorybook kernel: [46572.739216] NVRM: This may be due to a known Linux kernel bug. Please Aug 22 17:26:26 glorybook kernel: [46572.739216] NVRM: see the README section on 64-bit BARs for additional Aug 22 17:26:26 glorybook kernel: [46572.739216] NVRM: information. Aug 22 17:26:26 glorybook kernel: [46572.739224] nvidia: probe of :01:00.0 failed with err
[Kernel-packages] [Bug 1712427] [NEW] Audio output improperly switches to Speakers when HDMI removed
Public bug reported: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: Audio output improperly switches to Speakers when HDMI removed Status in linux package in Ubuntu: New Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] Re: No audio output to Speakers when HDMI cable removed
** Summary changed: - Audio output improperly switches to Speakers when HDMI removed + No audio output to Speakers when HDMI cable removed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Incomplete Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] Re: No audio output to Speakers when HDMI cable removed
apport information ** Tags added: apport-collected xenial ** Description changed: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. + --- + ApportVersion: 2.20.1-0ubuntu2.10 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: brain 2435 F pulseaudio + /dev/snd/controlC1: brain 2435 F pulseaudio + CurrentDesktop: Unity + DistroRelease: Ubuntu 16.04 + HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 + InstallationDate: Installed on 2015-05-26 (819 days ago) + InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) + MachineType: ASUSTeK COMPUTER INC. N501JW + Package: linux (not installed) + ProcFB: 0 inteldrmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 + ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 + RelatedPackageVersions: + linux-restricted-modules-4.10.0-33-generic N/A + linux-backports-modules-4.10.0-33-generic N/A + linux-firmware 1.157.12 + Tags: xenial + Uname: Linux 4.10.0-33-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark + _MarkForUpload: True + dmi.bios.date: 08/03/2015 + dmi.bios.vendor: American Megatrends Inc. + dmi.bios.version: N501JW.210 + dmi.board.asset.tag: ATN12345678901234567 + dmi.board.name: N501JW + dmi.board.vendor: ASUSTeK COMPUTER INC. + dmi.board.version: 1.0 + dmi.chassis.asset.tag: ATN12345678901234567 + dmi.chassis.type: 10 + dmi.chassis.vendor: ASUSTeK COMPUTER INC. + dmi.chassis.version: 1.0 + dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: + dmi.product.name: N501JW + dmi.product.version: 1.0 + dmi.sys.vendor: ASUSTeK COMPUTER INC. ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937228/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname:
[Kernel-packages] [Bug 1712427] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937237/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937238/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937236/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937239/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937243/+files/WifiSyslog.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937233/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937229/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937230/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937241/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937240/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937242/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] JournalErrors.txt
apport information ** Attachment added: "JournalErrors.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937232/+files/JournalErrors.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937231/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937234/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1712427/+attachment/4937235/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] Re: No audio output to Speakers when HDMI cable removed
I have had this problem since a long time. With kernel 4.13 it seems to be fixed. ** Tags added: kernel-fixed-upstream ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1712427] Re: No audio output to Speakers when HDMI cable removed
Unfortunately I have to revise what I said. The bug does still exists in 4.13. There is however the difference that with the 4.10 kernel it always exists, whereas in 4.13 it sometimes happens and sometimes correctly switches to analog audio. I haven't found yet any pattern when it happens. ** Tags removed: kernel-fixed-upstream ** Tags added: kernel-bug-exists-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1712427 Title: No audio output to Speakers when HDMI cable removed Status in linux package in Ubuntu: Confirmed Bug description: The Sound Settings dialog in Unity allows to switch between various audio outputs. If HDMI is selected and the cable removed the dialog shows that Speakers are selected. But there is no audio. To actually output audio to speakers one needs to click some other output ("Simultaneous output ...") and then again on Speakers. The expected behaviour would be to actually play audio on the speakers without the need to switch forth and back. --- ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: brain 2435 F pulseaudio /dev/snd/controlC1: brain 2435 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (819 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 ProcVersionSignature: Ubuntu 4.10.0-33.37~16.04.1-generic 4.10.17 RelatedPackageVersions: linux-restricted-modules-4.10.0-33-generic N/A linux-backports-modules-4.10.0-33-generic N/A linux-firmware 1.157.12 Tags: xenial Uname: Linux 4.10.0-33-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dialout dip disk lp lpadmin opt plugdev sambashare sudo vboxusers wireshark _MarkForUpload: True dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1712427/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1658016] Re: Intel AC7260 wireless (iwlwifi) stops working after computer sleep/wakeup
/dev/snd/controlC1: brain 2827 F pulseaudio /dev/snd/controlC0: brain 2827 F pulseaudio CurrentDesktop: Unity Date: Fri Jan 20 09:51:58 2017 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (604 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.4.0-62-generic N/A linux-backports-modules-4.4.0-62-generic N/A linux-firmware1.157.8 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1658016/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1658016] [NEW] Intel AC7260 wireless (iwlwifi) stops working after computer sleep/wakeup
Public bug reported: Since about the beginning of 2017 the Intel AC7260 wireless card on my Asus UX501 stops working correctly when the computer suspends to RAM and wakes up again (laptop lid closed and opened). The message is: [ 7679.281856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready The only way to come around this problem is to re-insert the iwlwifi module: sudo modprobe -r iwlwifi; sudo modprobe iwlwifi To be more precise what it means stops working: The wifi does not see the networks correctly. nm-applet reports only one of many networks in my area. My network is not there and it does not connect. I used to have the problem rarely in the past. However it happened only occasionally and I could live with the above workaround. Since about the beginning of 2017 it happens __always__. Not sure, which update exactly caused it, but you can imagine how annoying it is. I would appreciate if it could be fixed. Thanks! Here is the relevant dmesg log: [ 7679.149644] PM: resume of devices complete after 737.622 msecs [ 7679.150241] PM: Finishing wakeup. [ 7679.150242] Restarting tasks ... done. [ 7679.163190] Bluetooth: hci0: read Intel version: 3707100180012d0d00 [ 7679.163197] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq [ 7679.188077] bbswitch: disabling discrete graphics [ 7679.188089] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95) [ 7679.279490] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7679.280238] asix 3-3:1.0 eth0: link down [ 7679.280695] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7679.281856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7679.281960] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7679.282220] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7679.342219] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 7679.467403] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7679.467709] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7679.483163] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7679.549503] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7700.394009] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7700.544809] cfg80211: World regulatory domain updated: [ 7700.544812] cfg80211: DFS Master region: unset [ 7700.544812] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 7700.544814] cfg80211: (2402000 KHz - 2472000 KHz @ 4 KHz), (N/A, 2000 mBm), (N/A) [ 7700.544815] cfg80211: (2457000 KHz - 2482000 KHz @ 4 KHz), (N/A, 2000 mBm), (N/A) [ 7700.544816] cfg80211: (2474000 KHz - 2494000 KHz @ 2 KHz), (N/A, 2000 mBm), (N/A) [ 7700.544817] cfg80211: (517 KHz - 525 KHz @ 8 KHz, 16 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 7700.544818] cfg80211: (525 KHz - 533 KHz @ 8 KHz, 16 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 7700.544819] cfg80211: (549 KHz - 573 KHz @ 16 KHz), (N/A, 2000 mBm), (0 s) [ 7700.544820] cfg80211: (5735000 KHz - 5835000 KHz @ 8 KHz), (N/A, 2000 mBm), (N/A) [ 7700.544821] cfg80211: (5724 KHz - 6372 KHz @ 216 KHz), (N/A, 0 mBm), (N/A) [ 7700.545380] Intel(R) Wireless WiFi driver for Linux [ 7700.545382] Copyright(c) 2003- 2015 Intel Corporation [ 7700.546038] iwlwifi :3b:00.0: loaded firmware version 17.352738.0 op_mode iwlmvm [ 7700.557859] iwlwifi :3b:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 7700.557914] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7700.558147] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7700.741439] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 7700.747514] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7700.747609] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7700.747849] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7700.931190] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7700.931425] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7700.946613] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7700.999856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-extra-4.4.0-62-generic 4.4.0-62.83 ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40 Uname: Linux 4.4.0-62-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: brain 2827 F pulseaudio /dev/snd/controlC0: brain 2827 F pulseaudio CurrentDesktop: Unity Date: Fri Jan 20 09:51:58 2017 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (604 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT
[Kernel-packages] [Bug 1658016] Re: Intel AC7260 wireless (iwlwifi) stops working after computer sleep/wakeup
inux 4.4.0-62-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: - USERPID ACCESS COMMAND - /dev/snd/controlC1: brain 2827 F pulseaudio - /dev/snd/controlC0: brain 2827 F pulseaudio + USERPID ACCESS COMMAND + /dev/snd/controlC1: brain 2827 F pulseaudio + /dev/snd/controlC0: brain 2827 F pulseaudio CurrentDesktop: Unity Date: Fri Jan 20 09:51:58 2017 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (604 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 RelatedPackageVersions: - linux-restricted-modules-4.4.0-62-generic N/A - linux-backports-modules-4.4.0-62-generic N/A - linux-firmware1.157.8 + linux-restricted-modules-4.4.0-62-generic N/A + linux-backports-modules-4.4.0-62-generic N/A + linux-firmware1.157.8 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1658016 Title: Intel AC7260 wireless (iwlwifi) stops working after computer sleep/wakeup Status in linux package in Ubuntu: New Bug description: Since about the beginning of 2017 the Intel AC7260 wireless card on my Asus UX501 stops working correctly when the computer suspends to RAM and wakes up again (laptop lid closed and opened). The message is: [ 7679.281856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready The only way to come around this problem is to re-insert the iwlwifi module: sudo modprobe -r iwlwifi; sudo modprobe iwlwifi To be more precise what it means stops working: The wifi does not see the networks correctly. nm-applet reports only one of many networks in my area. My network is not there and it does not connect. I used to have the problem rarely in the past. However it happened only occasionally and I could live with the above workaround. Since about the beginning of 2017 it happens __always__. Not sure, which update exactly caused it, but you can imagine how annoying it is. I would appreciate if it could be fixed. Thanks! Here is the relevant dmesg log: [ 7679.149644] PM: resume of devices complete after 737.622 msecs [ 7679.150241] PM: Finishing wakeup. [ 7679.150242] Restarting tasks ... done. [ 7679.163190] Bluetooth: hci0: read Intel version: 3707100180012d0d00 [ 7679.163197] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq [ 7679.188077] bbswitch: disabling discrete graphics [ 7679.188089] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95) [ 7679.279490] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7679.280238] asix 3-3:1.0 eth0: link down [ 7679.280695] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7679.281856] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7679.281960] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7679.282220] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7679.342219] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 7679.467403] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7679.467709] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7679.483163] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7679.549503] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7700.394009] iwlwifi :3b:00.0: L1 Disabled - LTR Enabled [ 7700.544809] cfg80211: World regulatory domain updated: [ 7700.544812] cfg80211
[Kernel-packages] [Bug 1658016] Re: Intel AC7260 wireless (iwlwifi) stops working after computer sleep/wakeup
.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: brain 2827 F pulseaudio /dev/snd/controlC0: brain 2827 F pulseaudio CurrentDesktop: Unity Date: Fri Jan 20 09:51:58 2017 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (604 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.4.0-62-generic N/A linux-backports-modules-4.4.0-62-generic N/A linux-firmware1.157.8 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1658016/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1658016] Re: Intel AC7260 wireless (iwlwifi) stops working after computer sleep/wakeup
not ready ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-extra-4.4.0-62-generic 4.4.0-62.83 ProcVersionSignature: Ubuntu 4.4.0-62.83-generic 4.4.40 Uname: Linux 4.4.0-62-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: brain 2827 F pulseaudio /dev/snd/controlC0: brain 2827 F pulseaudio CurrentDesktop: Unity Date: Fri Jan 20 09:51:58 2017 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (604 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.4.0-62-generic N/A linux-backports-modules-4.4.0-62-generic N/A linux-firmware1.157.8 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1658016/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1658016] Re: Intel AC7260 wireless (iwlwifi) stops working after computer sleep/wakeup
ortVersion: 2.20.1-0ubuntu2.5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: brain 2827 F pulseaudio /dev/snd/controlC0: brain 2827 F pulseaudio CurrentDesktop: Unity Date: Fri Jan 20 09:51:58 2017 HibernationDevice: RESUME=UUID=5165b586-2b44-4e4b-be49-177090e3b609 InstallationDate: Installed on 2015-05-26 (604 days ago) InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Release amd64 (20150422) MachineType: ASUSTeK COMPUTER INC. N501JW ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-62-generic root=UUID=299cfed8-e49e-40d4-a8dd-fd66089e6d8a ro quiet splash iwlwifi.power_save=1 iwlwifi.power_level=5 acpi_osi= acpi_backlight=vendor acpi_enforce_resources=lax acpi=force nmi_watchdog=0 drm.vblankoffdelay=1 i915.semaphores=1 i915.enable_rc6=7 i915.lvds_downclock=1 rcutree.rcu_idle_gp_delay=1 pcie_aspm=force i915.enable_psr=1 i915.enable_fbc=1 i915.disable_power_well=1 vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.4.0-62-generic N/A linux-backports-modules-4.4.0-62-generic N/A linux-firmware1.157.8 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/03/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: N501JW.210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: N501JW dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: 1.0 dmi.chassis.asset.tag: ATN12345678901234567 dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK COMPUTER INC. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrN501JW.210:bd08/03/2015:svnASUSTeKCOMPUTERINC.:pnN501JW:pvr1.0:rvnASUSTeKCOMPUTERINC.:rnN501JW:rvr1.0:cvnASUSTeKCOMPUTERINC.:ct10:cvr1.0: dmi.product.name: N501JW dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK COMPUTER INC. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1658016/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 2077063] [NEW] package nvidia-dkms-545-open (not installed) failed to install/upgrade: »installiertes nvidia-dkms-545-open-Skript des Paketes post-installation«-Unterprozess gab
Public bug reported: package nvidia-dkms-545-open (not installed) failed to install/upgrade: »installiertes nvidia-dkms-545-open-Skript des Paketes post- installation«-Unterprozess gab den Fehlerwert 10 zurück, unter Kernel 6.8 hwe22.04 ProblemType: Package DistroRelease: Ubuntu 22.04 Package: nvidia-dkms-545-open (not installed) ProcVersionSignature: Ubuntu 6.8.0-40.40~22.04.3-generic 6.8.12 Uname: Linux 6.8.0-40-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 CasperMD5CheckResult: unknown Date: Thu Aug 15 09:46:28 2024 ErrorMessage: »installiertes nvidia-dkms-545-open-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 10 zurück InstallationDate: Installed on 2022-08-17 (728 days ago) InstallationMedia: Ubuntu 20.04.4 LTS "Focal Fossa" - Release amd64 (20220223) Python3Details: /usr/bin/python3.10, Python 3.10.12, python3-minimal, 3.10.6-1~22.04 PythonDetails: /usr/bin/python3.10, Python 3.10.12, python-is-python3, 3.9.2-2 RelatedPackageVersions: dpkg 1.21.1ubuntu2.3 apt 2.4.12 SourcePackage: nvidia-graphics-drivers-545 Title: package nvidia-dkms-545-open (not installed) failed to install/upgrade: »installiertes nvidia-dkms-545-open-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 10 zurück UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: nvidia-graphics-drivers-545 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package jammy -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to nvidia-graphics-drivers-545 in Ubuntu. https://bugs.launchpad.net/bugs/2077063 Title: package nvidia-dkms-545-open (not installed) failed to install/upgrade: »installiertes nvidia-dkms-545-open-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 10 zurück, unter Kernel 6.8 hwe22.04 Status in nvidia-graphics-drivers-545 package in Ubuntu: New Bug description: package nvidia-dkms-545-open (not installed) failed to install/upgrade: »installiertes nvidia-dkms-545-open-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 10 zurück, unter Kernel 6.8 hwe22.04 ProblemType: Package DistroRelease: Ubuntu 22.04 Package: nvidia-dkms-545-open (not installed) ProcVersionSignature: Ubuntu 6.8.0-40.40~22.04.3-generic 6.8.12 Uname: Linux 6.8.0-40-generic x86_64 NonfreeKernelModules: nvidia_modeset nvidia ApportVersion: 2.20.11-0ubuntu82.6 Architecture: amd64 CasperMD5CheckResult: unknown Date: Thu Aug 15 09:46:28 2024 ErrorMessage: »installiertes nvidia-dkms-545-open-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 10 zurück InstallationDate: Installed on 2022-08-17 (728 days ago) InstallationMedia: Ubuntu 20.04.4 LTS "Focal Fossa" - Release amd64 (20220223) Python3Details: /usr/bin/python3.10, Python 3.10.12, python3-minimal, 3.10.6-1~22.04 PythonDetails: /usr/bin/python3.10, Python 3.10.12, python-is-python3, 3.9.2-2 RelatedPackageVersions: dpkg 1.21.1ubuntu2.3 apt 2.4.12 SourcePackage: nvidia-graphics-drivers-545 Title: package nvidia-dkms-545-open (not installed) failed to install/upgrade: »installiertes nvidia-dkms-545-open-Skript des Paketes post-installation«-Unterprozess gab den Fehlerwert 10 zurück UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-545/+bug/2077063/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp