Re: [Ada] 4.3.0-rc1 available
Clear for Ada on x86 and x86_64-linux: http://gcc.gnu.org/ml/gcc-testresults/2008-02/msg01630.html http://gcc.gnu.org/ml/gcc-testresults/2008-02/msg01586.html I see lots of libmudflap FAIL on both targets though, is someone working on those FAIL? I collected on gcc-testresults quite good Ada results for 4.3 on: powerpc64-suse-linux-gnu hppa2.0w-hp-hpux11.11 hppa-unknown-linux-gnu s390-ibm-linux-gnu s390x-ibm-linux-gnu sparc-sun-solaris2.11 sparc-sun-solaris2.6 powerpc64-suse-linux-gnu ia64-suse-linux-gnu mips-sgi-irix5.3 Note very good (tasking likely not implemented and not signaled as such): i386-unknown-netbsdelf3.1 x86_64-unknown-netbsd4.0 Missing are Ada results for x86-darwin and powerpc-darwin, I've CCed macada.org people who seem to provide 4.3 based Ada for both targets: http://macada.org/macada/Downloads.html Alan & Al, do you have testresults? Matthias Klose provided Debian-20080113-1 4.3 results with Ada for ia64/sparc/s390/powerpc/i486/hppa/x86_64. Only missing from debian are mips, mipsel and alpha which were present with Ada for 4.1. Matthias are there known issues for 4.3/Ada on those targets or just lack of interest? Another detail: md5.sum does not contain the hash for the gcc-4.3.0-RC-20080222.tar.bz2.tar.bz2 file (which I assume is the prefered download since it's 23% smaller than the .tar.gz). Sincerely, Laurent On Fri, 2008-02-22 at 15:41 +0100, Jakub Jelinek wrote: > GCC 4.3.0 release candidate 1 is now available at: > > ftp://gcc.gnu.org/pub/gcc/snapshots/4.3.0-RC-20080222/ > > Please test the tarballs there and report any problems to Bugzilla. CC me > on the bugs if you believe they are regressions from previous releases > severe enough that they should block the 4.3.0 release. >
Re: Fix C++0x regressions for gcc-4.3
Joe Buck escreveu: > There is no such thing as a "C++0x regression", since (very limited and > experimental) C++0x support is brand new in 4.3, and 4.3.0 hasn't been > released yet. A regression is something that worked correctly in a > previously released version of GCC, but that doesn't work now. Thanks for your explanation (and Andrew's in a private message). I was looking for this info in a FAQ but couldn't find it. Regards, Rodolfo Lima.
Re: [Ada] 4.3.0-rc1 available
Laurent GUERBY writes: > Clear for Ada on x86 and x86_64-linux: > > http://gcc.gnu.org/ml/gcc-testresults/2008-02/msg01630.html > http://gcc.gnu.org/ml/gcc-testresults/2008-02/msg01586.html > > I see lots of libmudflap FAIL on both targets though, is someone > working on those FAIL? > > I collected on gcc-testresults quite good Ada results for 4.3 on: > > powerpc64-suse-linux-gnu > hppa2.0w-hp-hpux11.11 > hppa-unknown-linux-gnu > s390-ibm-linux-gnu > s390x-ibm-linux-gnu > sparc-sun-solaris2.11 > sparc-sun-solaris2.6 > powerpc64-suse-linux-gnu > ia64-suse-linux-gnu > mips-sgi-irix5.3 > > Note very good (tasking likely not implemented and not signaled as > such): > i386-unknown-netbsdelf3.1 > x86_64-unknown-netbsd4.0 > > Missing are Ada results for x86-darwin and powerpc-darwin, I've CCed > macada.org people who seem to provide 4.3 based Ada for both targets: > > http://macada.org/macada/Downloads.html > > Alan & Al, do you have testresults? > > Matthias Klose provided Debian-20080113-1 4.3 results with Ada for > ia64/sparc/s390/powerpc/i486/hppa/x86_64. Only missing from debian are > mips, mipsel and alpha which were present with Ada for 4.1. > > Matthias are there known issues for 4.3/Ada on those targets or just > lack of interest? recent build logs can be found here: http://buildd.debian.org/build.php?pkg=gnat-4.3 alpha currently fails with a bootstrap comparision failure (Ludovic?); the mips buildd's do have unrelated problem; asking our mips porters to do manual builds. Matthias
Re: [Ada] 4.3.0-rc1 available
On Sun, 24 Feb 2008, Laurent GUERBY wrote: > Clear for Ada on x86 and x86_64-linux: > > http://gcc.gnu.org/ml/gcc-testresults/2008-02/msg01630.html > http://gcc.gnu.org/ml/gcc-testresults/2008-02/msg01586.html > > I see lots of libmudflap FAIL on both targets though, is someone > working on those FAIL? Uros looked at this for me and thinks it might be due to using an old libc on the cfarm. I'll let him explain exactly what's needed. --Kaveh -- Kaveh R. Ghazi [EMAIL PROTECTED]
PureMessage has detected a content threat
PureMessage has detected a content threat in a mail sent by you. Event: Threat Action: Message quarantined Message ID: <[EMAIL PROTECTED]> Message subject:Re: Message Error Recipient: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> Attachment information: Event: Threat Action: No action Filename: data.zip Threat: Filetype
Re: [Ada] 4.3.0-rc1 available
On Sun, 2008-02-24 at 09:23 -0500, Kaveh R. GHAZI wrote: > On Sun, 24 Feb 2008, Laurent GUERBY wrote: > > > Clear for Ada on x86 and x86_64-linux: > > > > http://gcc.gnu.org/ml/gcc-testresults/2008-02/msg01630.html > > http://gcc.gnu.org/ml/gcc-testresults/2008-02/msg01586.html > > > > I see lots of libmudflap FAIL on both targets though, is someone > > working on those FAIL? > > Uros looked at this for me and thinks it might be due to using an old > libc on the cfarm. I'll let him explain exactly what's needed. For x86_64 I used debian 4.0 libc6 2.3.6.ds1-13 (I can update to 2.3.6.ds1-13etch5). For x86 I used the much older ubuntu 5.10 libc6 2.3.5-1ubuntu12. Laurent
GCC mirror changing IPs
Hi, We operate a GCC release mirror in St. Louis, MO (mirrors.laffeycomputer.com). This server has changed IP addresses, which is normally no worry on your end. But the old IP had special access to the master server to be able to download the releases right when they came out, and thus take some load off of your servers. This new IP address does not seem to have that. The old IP was 66.165.104.114 and the new IP is 71.91.230.170. Both should have a revers DNS PTR of pong.laffeycomputer.com. If you could enable the mirror access for the new IP I would appreciate it. Note that the old IP may be active for a little while as well. I am using it to get the latest release right now. Thanks, -- Joe Laffey| Visual Effects for Film and Video LAFFEY Computer Imaging | - St. Louis, MO | Show Reel http://LAFFEY.tv/?e09280 USA | - . |-*- Digital Fusion Plugins -*- --
Re: [Ada] 4.3.0-rc1 available
Laurent GUERBY wrote: http://gcc.gnu.org/ml/gcc-testresults/2008-02/msg01630.html http://gcc.gnu.org/ml/gcc-testresults/2008-02/msg01586.html I see lots of libmudflap FAIL on both targets though, is someone working on those FAIL? Uros looked at this for me and thinks it might be due to using an old libc on the cfarm. I'll let him explain exactly what's needed. For x86_64 I used debian 4.0 libc6 2.3.6.ds1-13 (I can update to 2.3.6.ds1-13etch5). For x86 I used the much older ubuntu 5.10 libc6 2.3.5-1ubuntu12. Kaveh did some debugging on a failed test to get: /home/ghazi/gcc-testing/44/build/gcc/xgcc -B/home/ghazi/gcc-testing/44/build/gcc/ -ggdb3 -DDEBUG_ASSERT -I/home/ghazi/gcc-testing/44/egcc-SVN20080223/libmudflap/testsuite -I/home/ghazi/gcc-testing/44/egcc-SVN20080223/libmudflap/testsuite/.. -I.. -L/home/ghazi/gcc-testing/44/build/x86_64-unknown-linux-gnu/32/libmudflap/.libs/home/ghazi/gcc-testing/44/egcc-SVN20080223/libmudflap/testsuite/libmudflap.cth/pass37-frag.c -static -DSTATIC -fmudflapth -lmudflapth -lpthread -Wl,--noinhibit-exec -L/home/ghazi/gcc-testing/44/build/x86_64-unknown-linux-gnu/32/libmudflap/testsuite -ldl -lm -m32 -o ./pass37-frag.exe $file ./pass37-frag.exe./pass37-frag.exe: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV),for GNU/Linux 2.6.0, statically linked, for GNU/Linux 2.6.0, not stripped $./pass37-frag.exe Segmentation fault $gdb pass37-frag.exe GNU gdb 6.4.90-debian This GDB was configured as "x86_64-linux-gnu"... Using host libthread_dblibrary "/lib/libthread_db.so.1". (gdb) run Starting program: /home/ghazi/gcc-testing/44/build/x86_64-unknown-linux-gnu/libmudflap/testsuite/pass37-frag.exe [Thread debugging using libthread_db enabled] Cannot find new threads: generic error (gdb) q The program is running. Exit anyway? (y or n) y $/lib/libc.so.6 GNU C Library stable release version 2.3.6, by Roland McGrath et al. Copyright (C) 2005 Free Software Foundation, Inc. In my (working) case: GNU C Library stable release version 2.5, by Roland McGrath et al. Copyright (C) 2006 Free Software Foundation, Inc. Without knowing libc details I would say that 2.3.6 has a fatal bug somewhere that was fixed in later versions. Uros.
possible bug with libstdc++ in gcc4.3 20080215 linked to old user /usr/lib/libgcc_s.1.dylib
I installed gcc4.3 20080215 on os x10.5.2 using macports
The configure arguments (with prefix = /opt/local) are:
47 configure.args --enable-languages=c,c++,objc,obj-c++ \
48 --libdir=${prefix}/lib/${name} \
49 --includedir=${prefix}/include/${name} \
50 --infodir=${prefix}/share/info \
51 --mandir=${prefix}/share/man \
52 --with-local-prefix=${prefix} \
53 --with-system-zlib \
54 --disable-nls \
55 --program-suffix=-mp-${major} \
56 --with-gxx-include-dir=${prefix}/include/${name}/c++/ \
57 --with-gmp=${prefix} \
58 --with-mpfr=${prefix}
% otool -L /opt/local/lib/gcc43/libstdc++.6.dylib
gives:
/opt/local/lib/gcc43/libstdc++.6.dylib:
/opt/local/lib/gcc43/libstdc++.6.dylib (compatibility version 7.0.0,
current version 7.10.0)
/usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current
version 111.0.0)
/usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version
1.0.0)
So /opt/local/lib/gcc43/libstdc++.6.dylib is linked to the old, system
/usr/lib/libgcc_s.1.dylib instead of to the new
/opt/local/lib/gcc43/libgcc_s.1.dylib
Is this the correct behaviour?
Re: GCC mirror changing IPs
On Sun, 24 Feb 2008, Joe Laffey wrote: > If you could enable the mirror access for the new IP I would appreciate > it. Note that the old IP may be active for a little while as well. I am > using it to get the latest release right now. I've forwarded this to the group of admins for the gcc.gnu.org machine. Gerald
Re: GCC mirror changing IPs
On Sun, 24 Feb 2008, Gerald Pfeifer wrote: On Sun, 24 Feb 2008, Joe Laffey wrote: If you could enable the mirror access for the new IP I would appreciate it. Note that the old IP may be active for a little while as well. I am using it to get the latest release right now. I've forwarded this to the group of admins for the gcc.gnu.org machine. OK. Thanks. -- Joe Laffey| Visual Effects for Film and Video LAFFEY Computer Imaging | - St. Louis, MO | Show Reel http://LAFFEY.tv/?e09284 USA | - . |-*- Digital Fusion Plugins -*- --
