Re: kerberos5 breaks buildworld in -current
just replace mv with cp in /usr/src/kerberos5/lib/libasn1/Makefile Val To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
ATA DMA support is broken
After last changes ata DMA support is not workind and atapicd is not recognized on Toshiba Tecra-8100 (FreeBSD-5.0-CURRENT) Val Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #5: Tue Oct 3 14:33:01 EDT 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/VALCHO Timecounter "i8254" frequency 1193176 Hz CPU: Pentium III/Pentium III Xeon/Celeron (647.60-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff real memory = 134086656 (130944K bytes) avail memory = 123797504 (120896K bytes) Preloaded elf kernel "kernel" at 0xc065d000. Pentium Pro MTRR support enabled VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc05d2182 (122) VESA: S3 Incorporated. M7 BIOS md0: Malloc disk apm0: on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 11 isab0: at device 5.0 on pci0 isa0: on isab0 atapci0: port 0xfff0-0x at device 5.1 on pci0 atapci0: Busmastering DMA enabled uhci0: port 0xff80-0xff9f irq 11 at device 5.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: at 5.3 pci0: (vendor=0x11c1, dev=0x0441) at 7.0 irq 3 pci0: (vendor=0x1179, dev=0x0d01) at 9.0 irq 11 pci0: at 11.0 pci0: at 11.1 pcm0: port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff8000-0xefff irq 11 at device 12.0 on pci0 acpi0: on motherboard fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: at port 0x3e0 iomem 0xd irq 10 on isa0 pcic0: management irq 10 pccard0: on pcic0 pccard1: on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 pmtimer0 on isa0 unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled IPv6 packet filtering initialized, default to accept, logging disabled IPsec: Initialized Security Association Processing. IP Filter: v3.4.9 initialized. Default = pass all, Logging = disabled ata1-master: identify retries exceeded ad0: 11513MB [23392/16/63] at ata0-master BIOSPIO Mounting root from ufs:/dev/ad0s3a pccard: card inserted, slot 1 ep0: <3Com 3C556> at port 0x240-0x25f irq 5 slot 1 on pccard1 ep0: Ethernet address 00:00:86:52:40:af To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: ATA DMA support is broken
Soren, yes, I didn't make world today, but cvsup is after your last commit. Before that in my dmesg it was : ad0: 11513MB [23392/16/63] at ata0-master UDMA33 acd0: CDROM at ata1-master using UDMA33 Thanks, Val On Tue, 3 Oct 2000, Soren Schmidt wrote: > It seems Valentin Chopov wrote: > > After last changes ata DMA support is not workind and atapicd is not > > recognized on Toshiba Tecra-8100 (FreeBSD-5.0-CURRENT) > > Are you sure this is with the latest changes ? > > -Søren > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > with "unsubscribe freebsd-current" in the body of the message > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
after errors in SCSI (Adaptec 29160), 5.0 freezes
System is freezes, no panic, no reboot, need cold reset to restart... Thanks, Val This is from /var/log/messages : Oct 10 00:10:11 squid /boot/kernel/kernel: (da2:ahc0:0:2:0): Invalidating pack Oct 10 00:10:44 squid last message repeated 10 times Oct 10 00:11:03 squid last message repeated 6 times Oct 10 00:11:07 squid /boot/kernel/kernel: (da2:ahc0:0:2:0): SCB 0x60 - timed out while idle, SEQADDR == 0x3 Oct 10 00:11:07 squid /boot/kernel/kernel: sg[0] - Addr 0x2af1d000 : Length 4096 Oct 10 00:11:07 squid /boot/kernel/kernel: sg[1] - Addr 0x1c85e000 : Length 2048 Oct 10 00:11:07 squid /boot/kernel/kernel: (da2:ahc0:0:2:0): SCB 96: Immediate reset. Flags = 0x4040 Oct 10 00:11:07 squid /boot/kernel/kernel: (da2:ahc0:0:2:0): no longer in timeout, status = 34b Oct 10 00:11:07 squid /boot/kernel/kernel: ahc0: Issued Channel A Bus Reset. 32 SCBs aborted dmesg: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #1: Mon Oct 9 16:29:43 EDT 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/SQUID Timecounter "i8254" frequency 1193072 Hz CPU: Pentium III/Pentium III Xeon/Celeron (733.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x387fbff real memory = 805240832 (786368K bytes) config> di pcic0 No such device: pcic0 Invalid command or syntax. Type `?' for help. config> di sn0 No such device: sn0 Invalid command or syntax. Type `?' for help. config> di lnc0 No such device: lnc0 Invalid command or syntax. Type `?' for help. config> di le0 No such device: le0 Invalid command or syntax. Type `?' for help. config> di ie0 No such device: ie0 Invalid command or syntax. Type `?' for help. config> di fe0 No such device: fe0 Invalid command or syntax. Type `?' for help. config> di ed0 No such device: ed0 Invalid command or syntax. Type `?' for help. config> di cs0 No such device: cs0 Invalid command or syntax. Type `?' for help. config> di bt0 No such device: bt0 Invalid command or syntax. Type `?' for help. config> di aic0 No such device: aic0 Invalid command or syntax. Type `?' for help. config> di aha0 No such device: aha0 Invalid command or syntax. Type `?' for help. config> di adv0 No such device: adv0 Invalid command or syntax. Type `?' for help. config> q avail memory = 779165696 (760904K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 IOAPIC #0 intpin 16 -> irq 12 IOAPIC #0 intpin 17 -> irq 10 IOAPIC #0 intpin 18 -> irq 11 IOAPIC #0 intpin 19 -> irq 15 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee0 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee0 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec0 Preloaded elf kernel "kernel" at 0xc02c2000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02c209c. Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface pcib0: at pcibus 0 on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 0.0 irq 12 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xd000-0xd00f at device 7.1 on pci0 atapci0: Busmastering DMA enabled ata0: at 0x1f0 irq 14 on atapci0 fxp0: port 0xd800-0xd81f mem 0xd700-0xd70f,0xd7201000-0xd7201fff irq 10 at device 17.0 on pci0 fxp0: Ethernet address 00:90:27:12:fa:89 fxp1: port 0xdc00-0xdc1f mem 0xd710-0xd71f,0xd720-0xd7200fff irq 11 at device 18.0 on pci0 fxp1: Ethernet address 00:90:27:12:e0:85 ahc0: port 0xe000-0xe0ff mem 0xd7202000-0xd7202fff irq 15 at device 19.0 on pci0 aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 isa_dmainit(2, 1024) failed fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 vga0: at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled IP Filter: v3.4.9 initialized. Default = pass all, Logging = disabled ad0: 6180MB [13395/15/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da2 at ahc0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-3
ata-raid.c
ata-raid.c is missing from sys/conf/files Val To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
error in pci_cfgreg.c
I got this error while compiling the last kernel: cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include -D_KERNEL -include opt_global.h -elf -march=i686 -mpreferred-stack-boundary=2 ../../i386/pci/pci_cfgreg.c ../../i386/pci/pci_cfgreg.c: In function `pci_cfgregopen': ../../i386/pci/pci_cfgreg.c:95: dereferencing pointer to incomplete type ../../i386/pci/pci_cfgreg.c:99: dereferencing pointer to incomplete type ../../i386/pci/pci_cfgreg.c:100: dereferencing pointer to incomplete type ../../i386/pci/pci_cfgreg.c:100: sizeof applied to an incomplete type ../../i386/pci/pci_cfgreg.c:100: sizeof applied to an incomplete type ../../i386/pci/pci_cfgreg.c: At top level: ../../i386/pci/pci_cfgreg.c:139: warning: no previous prototype for `pci_cfgintr' ../../i386/pci/pci_cfgreg.c: In function `pci_cfgintr': ../../i386/pci/pci_cfgreg.c:150: increment of pointer to unknown structure ../../i386/pci/pci_cfgreg.c:150: arithmetic on pointer to an incomplete type ../../i386/pci/pci_cfgreg.c:151: dereferencing pointer to incomplete type ../../i386/pci/pci_cfgreg.c:151: dereferencing pointer to incomplete type ../../i386/pci/pci_cfgreg.c:153: dereferencing pointer to incomplete type ../../i386/pci/pci_cfgreg.c:153: dereferencing pointer to incomplete type ../../i386/pci/pci_cfgreg.c:157: dereferencing pointer to incomplete type machine/cpufunc.h:112: warning: inlining failed in call to `ffs' ../../i386/pci/pci_cfgreg.c:157: warning: called from here ../../i386/pci/pci_cfgreg.c:158: dereferencing pointer to incomplete type *** Error code 1 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: kernel trap 12 with interrupts disabled
I got the same with addition that the machine hangs:( Val On Wed, 18 Oct 2000, Manfred Antar wrote: > With current kernel I'm getting alot of : > kernel trap 12 with interrupts disabled > kernel trap 12 with interrupts disabled > kernel trap 12 with interrupts disabled > kernel trap 12 with interrupts disabled > kernel trap 12 with interrupts disabled > > Kernel from yesterday did not do this. > Everything seems to work fine although I think it hung on a "shutdown -r now" > I don't have a monitor hooked up to the machine right now, so I have no further info. > I'm in process of hooking up a serial console. > Manfred > == > || [EMAIL PROTECTED] || > || Ph. (415) 681-6235 || > == > > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > with "unsubscribe freebsd-current" in the body of the message > To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
sys/i386/i386/machdep.c:cpu_idle() changes causes this Was: Re:kernel trap 12 with interrupts disabled
I found that if I remove #ifndef SMP /#endif in:
sys/i386/i386/machdep.c:
void
cpu_idle(void)
{
#ifndef SMP
if (cpu_idle_hlt) {
disable_intr();
if (procrunnable())
enable_intr();
else {
enable_intr();
__asm __volatile("hlt");
}
}
#endif
}
it works again.
I'm running SMP kernel on Dual PIII machine.
Regards,
Val
On Thu, 19 Oct 2000, Valentin Chopov wrote:
> I got the same with addition that the machine hangs:(
>
> Val
>
> On Wed, 18 Oct 2000, Manfred Antar wrote:
>
> > With current kernel I'm getting alot of :
> > kernel trap 12 with interrupts disabled
> > kernel trap 12 with interrupts disabled
> > kernel trap 12 with interrupts disabled
> > kernel trap 12 with interrupts disabled
> > kernel trap 12 with interrupts disabled
> >
> > Kernel from yesterday did not do this.
> > Everything seems to work fine although I think it hung on a "shutdown -r now"
> > I don't have a monitor hooked up to the machine right now, so I have no further
>info.
> > I'm in process of hooking up a serial console.
> > Manfred
> > ==
> > || [EMAIL PROTECTED] ||
> > || Ph. (415) 681-6235 ||
> > ==
> >
> >
> >
> > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > with "unsubscribe freebsd-current" in the body of the message
> >
>
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of the message
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
device_tagenb in sys/cam/cam_xpt.c
After last changes , device_tagenb is not defined in sys/cam/cam_xpt.c Thanks, Val To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
CURRENT is freezing again ...
Hi, After last cvsup my machine (Dual PIII, SMP kernel) is freezing again in 10 min after boot... Thanks, Val To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
last changes in sys/kern/sysv_*.c in CURRENT and Squid 2.4
Hi, I have a problem with running server aplication which using message queues and shared memory - Squid 2.4 I'm giving short output of gdb. Thanks, Val (gdb) run -N Starting program: /usr/home/valentin/squid/squid-2.4-20001205/src/squid -N Program received signal SIGSYS, Bad system call. 0x48160ba0 in msgsys () from /usr/lib/libc.so.5 (gdb) where #0 0x48160ba0 in msgsys () from /usr/lib/libc.so.5 #1 0x481568bf in msgget () from /usr/lib/libc.so.5 #2 0x80a9c4c in storeDiskdDirInit (sd=0x8203000) at store_dir_diskd.c:386 #3 0x80a073c in storeDirInit () at store_dir.c:55 #4 0x809d981 in storeInit () at store.c:937 #5 0x80872e1 in mainInitialize () at main.c:523 #6 0x80877f4 in main (argc=2, argv=0xbfbffb78) at main.c:696 #7 0x804a4f1 in _start () To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
asm error in compiling SMP kernel
I got this one this time.
Val
cc -c -O -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes
-Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi
-nostdinc -I- -I. -I../.. -I../../../include
-I../../contrib/dev/acpica/Subsystem/Include -D_KERNEL -include opt_global.h -elf
-march=i686 -mpreferred-stack-boundary=2 ../../cam/cam_periph.c
../../cam/cam_periph.c: In function `cam_periph_unmapmem':
../../cam/cam_periph.c:687: internal error--unrecognizable insn:
(insn/i 287 1124 288 (parallel[
(set (mem/s/v:SI (plus:SI (reg:SI 0 %eax)
(const_int 284 [0x11c])) 0)
(asm_operands/v (" lock ; cmpxchgl %4,%0; jz 1f; pushl
%2; pushl %3; callmtx_exit_hard; addl$8,%%esp;1:#
exitlock_norecurse") ("=m") 0[
(const_int 0 [0x0])
(reg/v:SI 4 %esi)
(reg:SI 5 %edi)
(mem/s/v:SI (plus:SI (reg:SI 3 %ebx)
(const_int 284 [0x11c])) 0)
(reg:SI 0 %eax)
]
[
(asm_input:SI ("gi"))
(asm_input:SI ("g"))
(asm_input:SI ("r"))
(asm_input:SI ("0"))
(asm_input:SI ("1"))
] ("../../sys/mutex.h") 601))
(set (reg:SI 0 %eax)
(asm_operands/v (" lock ; cmpxchgl %4,%0; jz 1f; pushl
%2; pushl %3; callmtx_exit_hard; addl$8,%%esp;1:#
exitlock_norecurse") ("=a") 1[
(const_int 0 [0x0])
(reg/v:SI 4 %esi)
(reg:SI 5 %edi)
(mem/s/v:SI (plus:SI (reg:SI 3 %ebx)
(const_int 284 [0x11c])) 0)
(reg:SI 0 %eax)
]
[
(asm_input:SI ("gi"))
(asm_input:SI ("g"))
(asm_input:SI ("r"))
(asm_input:SI ("0"))
(asm_input:SI ("1"))
] ("../../sys/mutex.h") 601))
(clobber (reg:QI 1 %dl))
(clobber (reg:QI 2 %cl))
(clobber (mem:BLK (scratch) 0))
] ) -1 (insn_list 286 (nil))
(nil))
*** Error code 1
Stop in /usr/src/sys/compile/SQUID.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
sched_ule.c & SMP error
I'm getting an error in the sched_ule.c It looks that sched_add is called with "struct kse" arg. instead of "struct thread" Thanks, Val cc -c -O -pipe -march=pentiumpro -Wall -Wredundant-decls -Wnested-externs -Wstri ct-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fform at-extensions -std=c99 -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/contrib /dev/acpica -I/usr/src/sys/contrib/ipfilter -I/usr/src/sys/contrib/dev/ath -I/us r/src/sys/contrib/dev/ath/freebsd -D_KERNEL -include opt_global.h -fno-common -f inline-limit=15000 -fno-strict-aliasing -mno-align-long-strings -mpreferred-sta ck-boundary=2 -ffreestanding -Werror /usr/src/sys/kern/sched_ule.c /usr/src/sys/kern/sched_ule.c: In function `kseq_move': /usr/src/sys/kern/sched_ule.c:465: warning: passing arg 1 of `sched_add' from in compatible pointer type *** Error code 1 Stop in /usr/obj/usr/src/sys/MYKERNEL. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. == Valentin S. Chopov, CC[ND]P Sys/Net Admin SEI Data Inc. E-Mail: [EMAIL PROTECTED] == ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
