World Breakage in sys/modules/ukbd
A buildworld done in the last hour with a fresh cvsup fails with the following: touch opt_usb.h echo > ukbd.h echo '#define KBD_INSTALL_CDEV 1' > opt_kbd.h rm -f .depend mkdep -f .depend -a -nostdinc -D_KERNEL -DKLD_MODULE -I- -I. -I@ -I@/../ include -I/usr/obj/usr/src/i386/usr/include /usr/src/sys/modules/ukbd/../../ dev/usb/ukbd.c /usr/src/sys/modules/ukbd/../../dev/usb/ukbd.c:46: opt_ukbd.h: No such file or directory mkdep: compile failed *** Error code 1 Stop in /usr/src/sys/modules/ukbd. *** Error code 1 Stop in /usr/src/sys/modules. *** Error code 1 Stop in /usr/src/sys. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. [[1m2:34pm[m] 2 [/usr/src]:nic-31-c23-178# exit exit Script done on Tue Jan 11 14:35:13 2000 -- Jeremy L. Stock <[EMAIL PROTECTED]> ICQ 46329337<[EMAIL PROTECTED]> Fax # 612-629-6540 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
ViBRA16X Problems again after a make world yesterday
I haven't seen any reports of this yet. After a make world yesterday, I hear stuttered sound from RealPlayer G2 and xmms won't play anything at all. I tried to figure out when it was broken but didn't have any luck. It worked fine after my last make world on December 27th. -- Jeremy L. Stock <[EMAIL PROTECTED]> ICQ 46329337 Fax # 612-629-6540 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Creative ViBRA16X Problem (fwd)
Thought I'd post this to -current also since it gives a little more detail (I hope). I can't believe I'm the only one experiencing this since it's still around when I do a fresh install from a snapshot. Not a huge deal for me since I can use Windows for audio, but I'd rather use FreeBSD again. I'm sure this will get addressed before 4.0R. I just wanted to make sure it's a known issue. -- Jeremy L. Stock <[EMAIL PROTECTED]> ICQ 46329337 Fax # 612-629-6540 -- Forwarded message -- Date: Tue, 18 Jan 2000 22:14:44 -0600 (CST) From: Jeremy L. Stock <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: Creative ViBRA16X Problem I posted this on -current almost a week ago and only received one response that didn't solve the problem. Audio hasn't played correctly for me since December 27th. Now when I try to play audio, it just stutters. I'm not sure when it broke since I went from -current as of the 27th to -current as of the 11th and now earlier today. The problem still remains even after a total reinstall. I just wanted to make sure you were aware of it and make sure you had a chance to correct it before 4.0R. Here's some info. Let me know if you need anything else. Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #0: Tue Jan 18 20:00:28 CST 2000 [EMAIL PROTECTED]:/usr/src/sys/compile/NIC Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 350796057 Hz CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf AMD Features=0x8800 real memory = 134217728 (131072K bytes) avail memory = 127315968 (124332K bytes) Preloaded elf kernel "kernel" at 0xc02c2000. sbc0: at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,1 on isa0 sbc0: setting card to irq 10, drq 0, 1 pcm0: on sbc0 unknown0: at port 0x201 on isa0 And from boot -v (Let me know if I left an important section out) Trying Read_Port at 203 CTL0043: start dependant CTL0043: adding irq mask 0x20 CTL0043: adding dma mask 0x2 CTL0043: adding dma mask 0x8 CTL0043: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0043: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x10 CTL0043: adding io range 0x388-0x397, size=0x4, align=0x4 CTL0043: start dependant CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: end dependant CTL7005: start dependant CTL7005: adding io range 0x201-0x201, size=0x1, align=0x1 CTL7005: start dependant CTL7005: adding io range 0x200-0x20f, size=0x1, align=0x1 CTL7005: end dependant isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices sbc0: at port 0x220-0x22f,0x300-0x301,0x388-0x38b irq 10 drq 0,1 on isa0 sbc0: setting card to irq 10, drq 0, 1 pcm0: on sbc0 pcm: setmap 2d000, 2000; 0xc7814000 -> 2d000 pcm: setmap 2f000, 2000; 0xc7816000 -> 2f000 unknown0: at port 0x201 on isa0 pnpinfo output: Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CTL00f0 (0xf0008c0e), Serial Number 0x PnP Version 1.0, Vendor Version 16 Device Description: Creative ViBRA16X PnP Logical Device ID: CTL0043 0x43008c0e #0 Device Description: Audio TAG Start DF Good Configuration IRQ: 5 - only one type (true/edge) DMA: channel(s) 1 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 [16-bit addr] I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 9 10 - onl
ATA Driver Problem
I have two hard drives both Western Digital 8.4GB (primary master) 6.4GB (primary slave) and a CDROM as secondary master. The driver detects the 8.4GB and my cdrom but doesn't seem to see the second hd at all. I'd provide more info if I could but / lives on the second drive so I'm not sure if I can provide any concrete details. I used the config example in LINT for the driver. -- Jeremy L. Stock <[EMAIL PROTECTED]> ICQ 46329337 Fax # 612-629-6540 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: ATA Driver Problem
On Mon, 27 Sep 1999, Soren Schmidt wrote: >It seems Jeremy L. Stock wrote: >> I have two hard drives both Western Digital 8.4GB (primary master) 6.4GB >> (primary slave) and a CDROM as secondary master. The driver detects the >> 8.4GB and my cdrom but doesn't seem to see the second hd at all. I'd provide >> more info if I could but / lives on the second drive so I'm not sure if >> I can provide any concrete details. I used the config example in LINT for >> the driver. > >Are you sure you have the latest versions of everything in /sys/dev/ata ?? >There was a window of opportunity where I messed up unless ATA_STATIC_ID >was defined... > >-Søren > Fairly positive I have the latest versions. I cvsup'ed twice yesterday. I forgot to mention my motherboard is an ASUS P5-AB if it matters at all. -- Jeremy L. Stock <[EMAIL PROTECTED]> ICQ 46329337 Fax # 612-629-6540 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: ATA Driver Problem
On Mon, 27 Sep 1999, Soren Schmidt wrote: >It seems Jeremy L. Stock wrote: >>>Are you sure you have the latest versions of everything in /sys/dev/ata ?? >>>There was a window of opportunity where I messed up unless ATA_STATIC_ID >>>was defined... >>> >>>-Søren >>> >> >>Fairly positive I have the latest versions. I cvsup'ed twice yesterday. I >>forgot to mention my motherboard is an ASUS P5-AB if it matters at all. > >Check that you have at least v1.25 of ata-disk.c. >BTW here it works on the same motherboard... > >-Søren > $FreeBSD: src/sys/dev/ata/ata-disk.c,v 1.28 1999/09/25 18:23:45 phk Exp $ Anything else I should look at? -- Jeremy L. Stock <[EMAIL PROTECTED]> ICQ 46329337 Fax # 612-629-6540 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Problem with sbc driver and/or newpcm
88, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 9 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 9 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 9 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x394, alignment 0x4, len 0x4 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 9 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG End DF Logical Device ID: CTL7005 0x05708c0e #1 Compatible Device ID: PNPb02f (2fb0d041) Device Description: Game TAG Start DF Good Configuration I/O Range 0x201 .. 0x201, alignment 0x1, len 0x1 [16-bit addr] TAG Start DF Acceptable Configuration I/O Range 0x200 .. 0x20f, alignment 0x1, len 0x1 [16-bit addr] TAG End DF End Tag Successfully got 48 resources, 2 logical fdevs -- card select # 0x0001 CSN CTL00f0 (0xf0008c0e), Serial Number 0x Logical device #0 IO: 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 0x0220 IRQ 5 0 DMA 1 3 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x 0x 0x0000 0x 0x 0x 0x 0x IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 -- Jeremy L. Stock <[EMAIL PROTECTED]> ICQ 46329337<[EMAIL PROTECTED]> Fax # 612-629-6540 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
