[Orgmode] Re: Debugging the publishing process?
Hi,
thanks Bernt (and Sebastian) for the help with this. In the end it turned
out that I had two places with the ORG files and apparently it was getting
quite confused with both. Getting rid of one of them and just leaving the
6.09a one did the trick. (I hadn't touched this computer for a bit more
than two months, so one forgets what is installed... :)
Thanks a lot,
Ángel de Vicente
En Tue, 21 Oct 2008 13:20:06 +0100, Bernt Hansen <[EMAIL PROTECTED]>
escribió:
Ángel de Vicente <[EMAIL PROTECTED]> writes:
I wonder if anyone can give me a tip... I'm just trying to figure out
the publishing process in Org-mode, but I'm not getting any
results.. is there a way to debug what ORG-MODE is trying to do?
I started with a basic setting, and defined a minimal (but I think
valid) org-publish-project-alist as:
(setq org-publish-project-alist
'(("OWD"
:base-directory "~/org/"
:publishing-directory "~/OWD")))
In ~/org I have a number of .org files that get properly exported to
HTML with C-c C-e h
but if I try to publish them with C-c C-e A, nothing appear in ~/OWD,
and have no clue where it went wrong.
By the way, I have version 6.04c installed (although the info manual
says it is 6.09a) (I just installed from the download link at
http://orgmode.org/index.html#sec-4)
This works fine for me in 6.09a (as reported by M-x org-version)
,[ minimal.emacs ]
| (global-font-lock-mode t)
|
| (add-hook 'org-mode-hook '(lambda () (flyspell-mode 1)))
|
| (add-to-list 'load-path (expand-file-name "~/git/org-mode/lisp"))
| (add-to-list 'auto-mode-alist '("\\.org$" . org-mode))
| (require 'org-install)
|
| (define-key global-map "\C-cl" 'org-store-link)
| (define-key global-map "\C-ca" 'org-agenda)
|
| (setq org-publish-project-alist
| '(("OWD"
|:base-directory "/tmp/org/"
|:publishing-directory "/tmp/OWD")))
`
I created /tmp/org and /tmp/OWD and then
emacs -q -l minimal.emacs
created /tmp/org/test.org and C-c C-e A creates /tmp/OWD/test.html
,[ test.org ]
| * First file
| Data for the first topic goes here
| #+BEGIN_EXAMPLE
| an example
| #+END_EXAMPLE
| This is after the example.
| * Export me
| here is some data
|
| More stuff
`
,[ test2.org ]
| * Another file
| * with stuff
| Whee it works fine.
`
The publishing process normally writes details to the message window (if
you click in the message window it open the *Messages* buffer so you can
scroll through the messages.)
,[ *Messages* ]
| Exporting... [2 times]
| Wrote /tmp/OWD/test2.html
| Exporting... done
| Publishing file /tmp/org/test.org
| Exporting... [3 times]
| Wrote /tmp/OWD/test.html
| Exporting... done
`
If I do it a second time without touching the files I get
,
| Skipping unmodified file /tmp/org/test2.org
| Skipping unmodified file /tmp/org/test.org
`
I'm sure there have been lots of changes since 6.04c that affect
publishing so I would recommend upgrading to the most recent version of
org-mode first and trying again.
Regards,
Bernt
--
--
http://www.iac.es/galeria/angelv/
High Performance Computing Support PostDoc
Instituto de Astrofísica de Canarias
___
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Error exporting indirect buffer to ASCII
Hi! > > I get a "wrong type argument: stringp, nil" when exporting to ASCII > > from > > an indirect buffer. I guess the problem is in the file > > > > org-6.09a/org-exp.el at line 1052: > > > > (file-name-nondirectory (buffer-file-name)) > have you customized org-export-run-in-background? No, C-h v org-export-run-in-background results in: ---snip-- org-export-run-in-background is a variable defined in `org-exp.el'. Its value is nil ---snip-- --- \\/ladi ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Re: Error exporting indirect buffer to ASCII
Well, the code snippet you mentioned is only reached if that variable is set, or f you export using a double prefix argument.. Anyway, I believe this problem is now fixed, get back to me if it persists in the latest git version. - Carsten On Oct 22, 2008, at 10:02 AM, Vladi Solutka wrote: Hi! I get a "wrong type argument: stringp, nil" when exporting to ASCII from an indirect buffer. I guess the problem is in the file org-6.09a/org-exp.el at line 1052: (file-name-nondirectory (buffer-file-name)) have you customized org-export-run-in-background? No, C-h v org-export-run-in-background results in: ---snip-- org-export-run-in-background is a variable defined in `org-exp.el'. Its value is nil ---snip-- --- \\/ladi ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] [PATCH] Allow storing clock status between emacs sessions.
Any chance that this patch will make it to the git repo? ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] [PATCH] Allow storing clock status between emacs sessions.
Hi Helge, this is a non-trivial patch, and have not yet had the time to look at it carefully. And I am too close to the next release 6.10, which will likely be the final version that will make it into Emacs 23, so I do not feel comfortable to add it now. After 6.10, good chances, yes. You can help by stress testing it, so that we can find bugs even before we install it. - Carsten On Oct 22, 2008, at 10:45 AM, Helge Gudmundsen wrote: Any chance that this patch will make it to the git repo? ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] [PATCH] Allow storing clock status between emacs sessions.
Hi Carsten, On 2008-10-22 11:18:59(+0200), Carsten Dominik wrote: > this is a non-trivial patch, and have not yet had the time to look at > it carefully. And I am too close to the next release 6.10, which will > likely be the final version that will make it into Emacs 23, so I do > not feel comfortable to add it now. After 6.10, good chances, yes. > > You can help by stress testing it, so that we can find bugs even > before we install it. I've already noticed a few minor problems, and will be posting a revised version of the patch soon, so keeping it out of 6.10 is probably best. If you want, I will split out the patch into three smaller patches; the changelog corrections, resuming clocking from an open clock line on clocking in, and saving/restoring `org-clock-history' and the running clock. The changelog corrections at least ought to make it into 6.10 :). James -- |---| ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Timestamps and `org-table-copy-down'
In a table column containing timestamps, pressing S-return with the cursor on the brackets surrounding the timestamp results the insertion of a copy of the timestamp with the active status toggled. Repeated a few times you end up with this: , | | Date | | |--| | | [2008-10-15 Wed] | | | <2008-10-15 Wed> | | | [2008-10-15 Wed] | | | <2008-10-15 Wed> | | | [2008-10-15 Wed] | | | <2008-10-15 Wed> | ` Is this supposed to happen? The documentation for `org-table-copy-down' mentions incrementing the day/month/year but not changing the active/inactive state. James -- |---| ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Re: Sync org-mode files in different computers
Hi, I am a new emacs user and I am exploring org-mode which is really amazing. I would like to know how I sync org-mode files in different computer over local network and over the internet. Hi, I personally use git to sync my org-mode files but there are lots of tools available to sync files across multiple machines. Some options are: - put your org-mode files in a source control system (git, svn, whatever system you are used to) and check out the files on all your target systems I use bzr (another vcs). My system is to place my org files on a server at home and mount the org directory as an nfs share on my local computers. Thus when I am at home I can access org files from any computer on my home network, or just run emacs on the server. Every evening a cron job automatically commits any changes to my server's bzr repo and at the same time pushes the updates to an external web server. On my notebook I have a local bzr branch of my org files. This covers most bases when I am away: If I remember before I go out, I can pull the latest changes from my home server to my notebook and just carry on working. If I forget to pull my changes I can pull all changes up to last evening's commit from the Internet. If all the above fails, I can just work on the branch I have on my notebook. This isn't usually more than a couple of days old. When I get to somewhere with an Internet connection I can use bzr to merge the changes on my notebook to the latest version. It also means that I have at least three copies of my org files in different places, so disk failures, etc won't result in much, or any, lost work. Ian. ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] [PATCH] Allow storing clock status between emacs sessions.
Sure thing, I will test it (he said, while frantically typing 'man patch' in a terminal window). Best regards, Helge (and once again, thanks for org-mode, which has ended my search for the perfect note-taking and organizing application) On Wed, Oct 22, 2008 at 10:18 AM, Carsten Dominik <[EMAIL PROTECTED]> wrote: > Hi Helge, > > this is a non-trivial patch, and have not yet had the time to look at it > carefully. And I am too close to the next release 6.10, which will likely > be the final version that will make it into Emacs 23, so I do not feel > comfortable to add it now. After 6.10, good chances, yes. > > You can help by stress testing it, so that we can find bugs even before we > install it. > > - Carsten > > On Oct 22, 2008, at 10:45 AM, Helge Gudmundsen wrote: > >> Any chance that this patch will make it to the git repo? >> >> >> ___ >> Emacs-orgmode mailing list >> Remember: use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode > > ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] How to move DEADLINE/SCHEDULED to the same line as Head line?
Now in my configuration, head lines with a DONE/DEADLINE stamp looks like * DONE Ask Manish the database username/password for PRD. CLOSED: [2008-10-01 Wed 10:00] * DONE Review the issues of 9-27 DEADLINE: <2008-09-30 Tue 18:00> But the format I prefer is as below, you can see DONE/DEADLINE is on the same line as the head title) * DONE Ask Manish the database username/password for PRD. CLOSED: [2008-10-01 Wed 10:00] * DONE Review the issues of 9-27 DEADLINE: <2008-09-30 Tue 18:00> Is this configurable and if it is, where can I find related documents or what's the variable to configure this? Thanks :) -- -- Larry.Liu Mobile: 13911483964 --- ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Error exporting indirect buffer to ASCII
Hi! > Well, the code snippet you mentioned is only reached if that variable > is set, or f you export using a double prefix argument.. > > Anyway, I believe this problem is now fixed, get back to me if it > persists in the latest git version. I just took the latest git snapshot and get the same error (after doing an "M-x org-export-as-ascii" from an indirect org buffer): ---snip Debugger entered--Lisp error: (wrong-type-argument stringp nil) file-name-nondirectory(nil) org-export-as-ascii(nil) call-interactively(org-export-as-ascii) execute-extended-command(nil) call-interactively(execute-extended-command) ---snip As far as I can see, the variable org-export-run-in-background is never referenced in the function 'org-export-as-ascii'. Instead, in org-exp.el:2193 the filename is build up from using 'buffer-file-name' (line 2199) which is nil since the indirect buffer doesn't have an associated filename. --- \\/ladi ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] After a custom agenda as follows I get a wrongly sorted result
Hi!
After a custom agenda as follows I get a wrongly sorted (see time gird) result
(see below)
(setq org-agenda-custom-commands
'(
...
("00" "agenda + prio a todos sorted prio up"
((agenda "prio ABC agenda"
((org-agenda-ndays 1)
(org-agenda-overriding-header "Today's Agenda + Prio A todos
")))
(alltodo "alle todos"
((org-agenda-skip-function
(lambda nil
(or (org-agenda-skip-entry-if (quote notregexp)
"\\=.*\\[#A\\]")
(org-agenda-skip-entry-if 'scheduled 'deadline
)))
((org-agenda-sorting-strategy '(priority-down
...
...
ADMIN: Scheduled: TODO whatever
:ADMIN:
LPM:Scheduled: INARBEIT whatever
:LPM:
Diary: Simchat Torah
16:00..
13:00..
9:00..
...
is this a bug or a config issue?
Rainer
___
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] org-mode and git
Hi folks, I had used bog standard RCS behind vc before (works fine for little stand alone projects), but recently loaded up the vc-git.el and added it to the supported backends for vc but some problems trying to update my org-mode install using it. Is it mature enough for this. What, if any, git interface for emacs do you guys recommend? -- The system of nature, of which man is a part, tends to be self-balancing, self-adjusting, self-cleansing. Not so with technology. ~E.F. Schumacher, Small is Beautiful, 1973 ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] org-mode and git
Also does anyone have a working Xemacs git support? Tim 2008/10/22 Richard Riley <[EMAIL PROTECTED]>: > > Hi folks, > > I had used bog standard RCS behind vc before (works fine for little > stand alone projects), but recently loaded up the vc-git.el and added it > to the supported backends for vc but some problems trying to update my > org-mode install using it. Is it mature enough for this. > > What, if any, git interface for emacs do you guys recommend? > > > -- > The system of nature, of which man is a part, tends to be self-balancing, > self-adjusting, self-cleansing. Not so with technology. ~E.F. Schumacher, > Small is Beautiful, 1973 > > > ___ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] How to move DEADLINE/SCHEDULED to the same line as Head line?
On Wed, Oct 22, 2008 at 3:48 PM, Larry. Liu wrote: > Now in my configuration, head lines with a DONE/DEADLINE stamp looks like > * DONE Ask Manish the database username/password for PRD. > CLOSED: [2008-10-01 Wed 10:00] How do you know I work on databases? :) > * DONE Review the issues of 9-27 > DEADLINE: <2008-09-30 Tue 18:00> > > But the format I prefer is as below, you can see DONE/DEADLINE is on the > same line as the head title) > * DONE Ask Manish the database username/password for PRD. CLOSED: > [2008-10-01 Wed 10:00] > * DONE Review the issues of 9-27 DEADLINE: <2008-09-30 Tue 18:00> > Is this configurable and if it is, where can I find related documents or > what's the variable to configure this? I am not sure if this is configurable. But have you looked at column view, particularly org-columns-default-format? -- Manish ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] org-mode and git
On Wed, Oct 22, 2008 at 5:03 PM, Richard Riley wrote: > > Hi folks, > > I had used bog standard RCS behind vc before (works fine for little > stand alone projects), but recently loaded up the vc-git.el and added it > to the supported backends for vc but some problems trying to update my > org-mode install using it. Is it mature enough for this. You mean update org-mode from within Emacs? Interesting. I will have to try that. > > What, if any, git interface for emacs do you guys recommend? I know of two DVC [1] and xgit. DVC is probably more comprehensive. -- Manish 1. http://download.gna.org/dvc/ ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] org-mode and git
Richard Riley <[EMAIL PROTECTED]> writes: > What, if any, git interface for emacs do you guys recommend? I would highly recommend magit[1]. I've been using it for a while now and it far better fits around the way /I/ use git :) You'll need a version[2] of git that supports --graph on the log command. Cheers, Phil Footnotes: [1] http://zagadka.vm.bytemark.co.uk/magit/magit.html [2] http://www.kernel.org/pub/software/scm/git/docs/git-log.html -- Philip Jackson web:http://www.shellarchive.co.uk photos: http://www.flickr.com/photos/[EMAIL PROTECTED]/ ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: org-mode and git
Phil Jackson <[EMAIL PROTECTED]> writes: > Richard Riley <[EMAIL PROTECTED]> writes: > >> What, if any, git interface for emacs do you guys recommend? > > I would highly recommend magit[1]. I've been using it for a while now > and it far better fits around the way /I/ use git :) > > You'll need a version[2] of git that supports --graph on the log > command. > > Cheers, > Phil > > Footnotes: > [1] http://zagadka.vm.bytemark.co.uk/magit/magit.html > [2] http://www.kernel.org/pub/software/scm/git/docs/git-log.html Looks good, a shame vc-git doesn't seem to work though. I will look into why as another set of non standard keys will make my head explode :-( Having said that its time to do some housekeeping anyway as there are few niggly little things I run into with packages and emacs 23 at the moment. C-x v v is a revelation in VC :-; ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Re: org-mode and git
Richard Riley <[EMAIL PROTECTED]> writes: > Looks good, a shame vc-git doesn't seem to work though. I will look into > why as another set of non standard keys will make my head explode :-( > Having said that its time to do some housekeeping anyway as there are > few niggly little things I run into with packages and emacs 23 at the > moment. > > C-x v v is a revelation in VC :-; It's great if you're working on only one file and want to commit all of its hunks, yes. Cheers, Phil -- Philip Jackson web:http://www.shellarchive.co.uk photos: http://www.flickr.com/photos/[EMAIL PROTECTED]/ ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] How to move DEADLINE/SCHEDULED to the same line as Head line?
On Wed, Oct 22, 2008 at 5:07 PM, Manish <[EMAIL PROTECTED]>wrote: > On Wed, Oct 22, 2008 at 3:48 PM, Larry. Liu wrote: > > Now in my configuration, head lines with a DONE/DEADLINE stamp looks > like > > * DONE Ask Manish the database username/password for PRD. > > CLOSED: [2008-10-01 Wed 10:00] > > How do you know I work on databases? :) :) Manish is my supervisor here :D > > > > * DONE Review the issues of 9-27 > > DEADLINE: <2008-09-30 Tue 18:00> > > > > But the format I prefer is as below, you can see DONE/DEADLINE is on > the > > same line as the head title) > > * DONE Ask Manish the database username/password for PRD. CLOSED: > > [2008-10-01 Wed 10:00] > > * DONE Review the issues of 9-27 DEADLINE: <2008-09-30 Tue 18:00> > > Is this configurable and if it is, where can I find related documents or > > what's the variable to configure this? > > I am not sure if this is configurable. But have you looked at column > view, particularly org-columns-default-format? > Seems it's not this variable, this variable is control the display of column view, not the behavior when adding a stamp like "CLOSE" or "DEADLINE" > > -- Manish > -- -- Larry.Liu Mobile: 13911483964 --- ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] org-plot questions
Hi, First of all, thanks to all for the work on org-mode and org-plot. A question about org-plot... Question 1: When I include an index column in the first column of the table, I am getting evenly spaced data points, with the xtic labels being coming from the 'ind:' column (2, in the first data set here). The behavior I expected was to use the second column (Frequency) as the independent variable, and to get a plot with 3 groups of 3 points, near frequencies of 1, 10, and 20. as I get with the 'Data Set B' group. Is this expected and correct? I know that this will also include the first column in the plot, which leads to my next question. Question 2: When I try to use the deps option, I either get an error or an undesired result. For example, if I include a "deps:3,4", I get a "Wrong type argument" error. If I enclose the 3,4 in single quotes (eg. deps:'3,4'), I get only the third column plotted, and not both third and fourth as I expected. What am I doing wrong? A comment - enclosing the argument for deps in single quotes, if that is the intention, seems inconsistent with the arguments for other options of that type (ind, for example). Question 3: Is there a way to produce 2 different plots from the same table data? Thanks again for the help. Jerry ** Data Set A #+PLOT: ind:2 | Index | Frequency | Amplitude | Phase | Delta | Peak | | 1 | 0.9 | 9 | 6 | 5 | 198 | | 2 | 1.0 | 10 | 9 | 7 | 212 | | 3 | 1.1 | 11 | 8 | 3 | 144 | | 4 | 9.9 | 19 |12 | 9 | 235 | | 5 | 10.0 | 18 | 7 |12 | 222 | | 6 | 10.1 | 22 |14 | 4 | 187 | | 7 | 19.9 | 14 |11 | 6 | 220 | | 8 | 20.0 | 20 |15 |14 | 213 | | 9 | 20.1 | 18 |16 |11 | 201 | ** Data Set B #+PLOT: ind:1 | Frequency | Amplitude | Phase | Delta | Peak | |---+---+---+---+--| | 0.9 | 9 | 6 | 5 | 198 | | 1.0 |10 | 9 | 7 | 212 | | 1.1 |11 | 8 | 3 | 144 | | 9.9 |19 |12 | 9 | 235 | | 10.0 |18 | 7 |12 | 222 | | 10.1 |22 |14 | 4 | 187 | | 19.9 |14 |11 | 6 | 220 | | 20.0 |20 |15 |14 | 213 | | 20.1 |18 |16 |11 | 201 | ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] [PATCH] Allow storing clock status between emacs sessions.
On Oct 22, 2008, at 11:42 AM, James TD Smith wrote: Hi Carsten, On 2008-10-22 11:18:59(+0200), Carsten Dominik wrote: this is a non-trivial patch, and have not yet had the time to look at it carefully. And I am too close to the next release 6.10, which will likely be the final version that will make it into Emacs 23, so I do not feel comfortable to add it now. After 6.10, good chances, yes. You can help by stress testing it, so that we can find bugs even before we install it. I've already noticed a few minor problems, and will be posting a revised version of the patch soon, so keeping it out of 6.10 is probably best. If you want, I will split out the patch into three smaller patches; the changelog corrections, resuming clocking from an open clock line on clocking in, and saving/restoring `org-clock-history' and the running clock. The changelog corrections at least ought to make it into 6.10 :). Did I mess up the ChangeLog again? Sorry about that, maybe a merge problem. I think git merge does not like the ChangeLog file structure Yes, please, this patch separately. - Carsten ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Timestamps and `org-table-copy-down'
This is a bug, fixed, thanks. - Carsten On Oct 22, 2008, at 11:47 AM, James TD Smith wrote: In a table column containing timestamps, pressing S-return with the cursor on the brackets surrounding the timestamp results the insertion of a copy of the timestamp with the active status toggled. Repeated a few times you end up with this: , | | Date | | |--| | | [2008-10-15 Wed] | | | <2008-10-15 Wed> | | | [2008-10-15 Wed] | | | <2008-10-15 Wed> | | | [2008-10-15 Wed] | | | <2008-10-15 Wed> | ` Is this supposed to happen? The documentation for `org-table-copy- down' mentions incrementing the day/month/year but not changing the active/inactive state. James -- |---| ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] org-plot questions
JBash <[EMAIL PROTECTED]> writes: > Hi, > > First of all, thanks to all for the work on org-mode and org-plot. > > A question about org-plot... > > Question 1: > When I include an index column in the first column of the table, I am > getting evenly spaced data points, > with the xtic labels being coming from the 'ind:' column (2, in the first > data set here). > > The behavior I expected was to use the second column (Frequency) as the > independent variable, and to get a > plot with 3 groups of 3 points, near frequencies of 1, 10, and 20. as I get > with the 'Data Set B' group. > > Is this expected and correct? > Hi Jerry, Not exactly expected, but I believe it is the correct behavior for now. Notice that you are missing an hline in your table after the headers. Without an obvious division between the headers, and the table data org-plot can not tell that the data is numeric, and should be interpreted as such, so it applies the values of the index column as xlabels to evenly spaced points (as if they were strings). Try the following table, and you should get a result more inline with expectations. #+PLOT: ind:2 with:points | Index | Frequency | Amplitude | Phase | Delta | Peak | |---+---+---+---+---+--| | 1 | 0.9 | 9 | 6 | 5 | 198 | | 2 | 1.0 |10 | 9 | 7 | 212 | | 3 | 1.1 |11 | 8 | 3 | 144 | | 4 | 9.9 |19 |12 | 9 | 235 | | 5 | 10.0 |18 | 7 |12 | 222 | | 6 | 10.1 |22 |14 | 4 | 187 | | 7 | 19.9 |14 |11 | 6 | 220 | | 8 | 20.0 |20 |15 |14 | 213 | | 9 | 20.1 |18 |16 |11 | 201 | > > I know that this will also include the first column in the plot, which leads > to my next question. > > Question 2: > When I try to use the deps option, I either get an error or an undesired > result. For example, if I include > a "deps:3,4", I get a "Wrong type argument" error. If I enclose the 3,4 in > single quotes (eg. deps:'3,4'), > I get only the third column plotted, and not both third and fourth as I > expected. What am I doing wrong? > A comment - enclosing the argument for deps in single quotes, if that is the > intention, seems inconsistent > with the arguments for other options of that type (ind, for example). > Sorry, the documentation is wrong and it specifies that the dependent columns should be specified as a comma separated list, when in actuality they should be specified as a standard lisp list "inside parenthesis separated by spaces". Thanks for catching this, I will submit a patch to the documentation. #+PLOT: ind:1 deps:(3 4) | Frequency | Amplitude | Phase | Delta | Peak | |---+---+---+---+--| | 0.9 | 9 | 6 | 5 | 198 | | 1.0 |10 | 9 | 7 | 212 | | 1.1 |11 | 8 | 3 | 144 | | 9.9 |19 |12 | 9 | 235 | | 10.0 |18 | 7 |12 | 222 | | 10.1 |22 |14 | 4 | 187 | | 19.9 |14 |11 | 6 | 220 | | 20.0 |20 |15 |14 | 213 | | 20.1 |18 |16 |11 | 201 | > > Question 3: > Is there a way to produce 2 different plots from the same table data? > Currently no there is not. In the current setup all of the plot lines adjacent to a table are collected and used to generate a single plot for the table. I does seem like a good idea to allow multiple plots from a single table. Two ideas that come to mind are... 1) keep all of the plot lines adjacent with the table, but number them into any number of different plots. For example the following would specify plots 1 and 2 for a table #+PLOT1: title:"the first plot" #+PLOT1: ind:1 with:points #+PLOT2: title:"the second plot on the same table" #+PLOT2: ind:2 deps:(3 4) with:lines | Frequency | Amplitude | Phase | Delta | Peak | |---+---+---+---+--| | 0.9 | 9 | 6 | 5 | 198 | | 1.0 |10 | 9 | 7 | 212 | | 1.1 |11 | 8 | 3 | 144 | | 9.9 |19 |12 | 9 | 235 | | 10.0 |18 | 7 |12 | 222 | | 10.1 |22 |14 | 4 | 187 | | 19.9 |14 |11 | 6 | 220 | | 20.0 |20 |15 |14 | 213 | | 20.1 |18 |16 |11 | 201 | 2) the only other mechanism which occurs to me is to somehow label the table with a unique ID, and then allow the plot lines to be located anywhere in the org-mode file and include the table ID as a new argument to the PLOT lines. This approach seems more flexible if more complicated. Thanks for the bug reports and ideas -- Eric > > Thanks again for the help. > Jerry > > ** Data Set A > #+PLOT: ind:2 > | Index | Frequency | Amplitude | Phase | Delta | Peak |
Re: [Orgmode] Re: Error exporting indirect buffer to ASCII
OK, thanks, I got it now. Fixed. - Carsten On Oct 22, 2008, at 1:18 PM, Vladi Solutka wrote: Hi! Well, the code snippet you mentioned is only reached if that variable is set, or f you export using a double prefix argument.. Anyway, I believe this problem is now fixed, get back to me if it persists in the latest git version. I just took the latest git snapshot and get the same error (after doing an "M-x org-export-as-ascii" from an indirect org buffer): ---snip Debugger entered--Lisp error: (wrong-type-argument stringp nil) file-name-nondirectory(nil) org-export-as-ascii(nil) call-interactively(org-export-as-ascii) execute-extended-command(nil) call-interactively(execute-extended-command) ---snip As far as I can see, the variable org-export-run-in-background is never referenced in the function 'org-export-as-ascii'. Instead, in org-exp.el:2193 the filename is build up from using 'buffer-file-name' (line 2199) which is nil since the indirect buffer doesn't have an associated filename. --- \\/ladi ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] After a custom agenda as follows I get a wrongly sorted result
Hi Rainer,
You need to add time-up to the sorting strategy. Time grid lines are
just added to the list of matches and then still need to be sorted in.
HTH
- Carsten
On Oct 22, 2008, at 1:24 PM, Rainer Stengele wrote:
Hi!
After a custom agenda as follows I get a wrongly sorted (see time
gird) result (see below)
(setq org-agenda-custom-commands
'(
...
("00" "agenda + prio a todos sorted prio up"
((agenda "prio ABC agenda"
((org-agenda-ndays 1)
(org-agenda-overriding-header "Today's Agenda + Prio A todos
")))
(alltodo "alle todos"
((org-agenda-skip-function
(lambda nil
(or (org-agenda-skip-entry-if (quote notregexp) "\\=.*\\[#A\
\]")
(org-agenda-skip-entry-if 'scheduled 'deadline
)))
((org-agenda-sorting-strategy '(priority-down
...
...
ADMIN: Scheduled: TODO
whatever :ADMIN:
LPM:Scheduled: INARBEIT
whatever :LPM:
Diary: Simchat Torah
16:00..
13:00..
9:00..
...
is this a bug or a config issue?
Rainer
___
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
___
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] HTML-export: arbitrary target directories when using setup files
Sebastian Rose <[EMAIL PROTECTED]> writes: Just for everyone to know: This is fixed in current git version. Thanks, Carsten!!! ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: bug or missing feature in undone repeating todos?
> On Tue, 21 Oct 2008 15:37:51 +0200, Carsten Dominik <[EMAIL PROTECTED]> > said: >> * TODO foo <2008-10-17 Fri +2d> CD> ? The example you had in your mail was: Yep. You're right that I blew the example and realized what the issue was after reading your response. See, you helped! -- "In the bathtub of history the truth is harder to hold than the soap, and much more difficult to find." -- Terry Pratchett ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] How to move DEADLINE/SCHEDULED to the same line as Head line?
Hi Larry, this is possible, but not recommended. You can configure the variable `org-insert-labeled-timestamps-at- point' to request that the deadline etc is inserted at point, and then you need to make sure that the cursor always is there where you want it inserted. However, the internals of project planning work more consistently if you allow Org to pus these into the second line, and then use other means like the agenda, the timeline, or column view to look at and edit these time stamps. - Carsten On Oct 22, 2008, at 12:18 PM, Larry.Liu wrote: Now in my configuration, head lines with a DONE/DEADLINE stamp looks like * DONE Ask Manish the database username/password for PRD. CLOSED: [2008-10-01 Wed 10:00] * DONE Review the issues of 9-27 DEADLINE: <2008-09-30 Tue 18:00> But the format I prefer is as below, you can see DONE/DEADLINE is on the same line as the head title) * DONE Ask Manish the database username/password for PRD. CLOSED: [2008-10-01 Wed 10:00] * DONE Review the issues of 9-27 DEADLINE: <2008-09-30 Tue 18:00> Is this configurable and if it is, where can I find related documents or what's the variable to configure this? Thanks :) -- -- Larry.Liu Mobile: 13911483964 --- ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Enhancement request : publish page limits
org-info.js ;-) ??? Make the de facto standard for viewing text in the internet !!! :-D Richard Riley <[EMAIL PROTECTED]> writes: > I didn't spot anything in the manual, but it would be nice if publish > automatically split large published org files into multiple html files > based on a "num entries per page" setting. This would then effectively > work as a handy blogging client IMO (ok no replies etc). Clearly it > would need to render a navigation widget too. (page 1,2,4,5 .. next 5 ) > etc. Does anyone have something like this or suggestions along the same > path? -- Sebastian Rose, EMMA STIL - mediendesign, Niemeyerstr.6, 30449 Hannover Tel.: +49 (0)511 - 36 58 472 Fax: +49 (0)1805 - 233633 - 11044 mobil: +49 (0)173 - 83 93 417 Email: [EMAIL PROTECTED], [EMAIL PROTECTED] Http: www.emma-stil.de ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Sync org-mode files in different computers
[EMAIL PROTECTED] (Flávio de Souza) writes: > I would like to know how I sync org-mode files in different computer > over local network and over the internet. I think most people will agree that the best way to sync org-mode files is to keep them under some kind of version control system. The advantage that has over something like rsync is that if you happen to make changes in different places (laptop and home, for example) without synchronizing in between (because you forget, or because your network connection is down, or something), then you can merge your edits in some way more fine-grained than "newest change wins". I started out using Subversion (svn) to keep my org-mode files, and am now using Mercurial (hg), which has both the advantages of being a dvcs (every working copy is also a complete repository) and of being easier to set up. Many people also like git or bzr. For just the purposes of syncing your org-mode files, which one you choose isn't very important. -- +---+ | Jason F. McBrayer[EMAIL PROTECTED] | | If someone conquers a thousand times a thousand others in | | battle, and someone else conquers himself, the latter one | | is the greatest of all conquerors. --- The Dhammapada| ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Enhancement request : publish page limits
Richard Riley <[EMAIL PROTECTED]> writes: > Hi, > > Do you have an example? > > The link > > http://orgmode.org/worg/code/org-info-js/org-info.js.html > > mentioned in the info file is dead. http://orgmode.org/worg/code/org-info-js/index.html -- Sebastian Rose, EMMA STIL - mediendesign, Niemeyerstr.6, 30449 Hannover Tel.: +49 (0)511 - 36 58 472 Fax: +49 (0)1805 - 233633 - 11044 mobil: +49 (0)173 - 83 93 417 Email: [EMAIL PROTECTED], [EMAIL PROTECTED] Http: www.emma-stil.de ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Enhancement request : publish page limits
Patch to fix this in doc/org.texi (pulled an hour ago).
diff --git a/doc/org.texi b/doc/org.texi
index 0ae852e..b2ce486 100644
--- a/doc/org.texi
+++ b/doc/org.texi
@@ -7688,7 +7688,7 @@ as well, press @kbd{?} for an overview of the available
keys). The second
view type is a @emph{folding} view much like Org provides it inside Emacs.
The script is available at @url{http://orgmode.org/org-info.js} and you can
find the documentation for it at
[EMAIL PROTECTED]://orgmode.org/worg/code/org-info-js/org-info.js.html}. We are
[EMAIL PROTECTED]://orgmode.org/worg/code/org-info-js/index.html}. We are
serving the script from our site, but if you use it a lot, you might not want
to be dependent on @url{orgmode.org} and prefer to install a local copy on
your own web server.
Richard Riley <[EMAIL PROTECTED]> writes:
> Hi,
>
> Do you have an example?
>
> The link
>
> http://orgmode.org/worg/code/org-info-js/org-info.js.html
>
> mentioned in the info file is dead.
>
> r.
>
>
> Sebastian Rose <[EMAIL PROTECTED]> writes:
>
>> org-info.js ;-)
>>
>> ???
>>
>> Make the de facto standard for viewing text in the internet !!!
>>
>> :-D
>>
>>
>> Richard Riley <[EMAIL PROTECTED]> writes:
>>> I didn't spot anything in the manual, but it would be nice if publish
>>> automatically split large published org files into multiple html files
>>> based on a "num entries per page" setting. This would then effectively
>>> work as a handy blogging client IMO (ok no replies etc). Clearly it
>>> would need to render a navigation widget too. (page 1,2,4,5 .. next 5 )
>>> etc. Does anyone have something like this or suggestions along the same
>>> path?
--
Sebastian Rose, EMMA STIL - mediendesign, Niemeyerstr.6, 30449 Hannover
Tel.: +49 (0)511 - 36 58 472
Fax: +49 (0)1805 - 233633 - 11044
mobil: +49 (0)173 - 83 93 417
Email: [EMAIL PROTECTED], [EMAIL PROTECTED]
Http: www.emma-stil.de
___
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] org-plot questions
Thanks, Eric!
It's a great tool... I like how it, within org, makes it easy to keep the
data organized an yet easily accessible.
Another quick org-plot question...
I found that to turn on the grid, I use:
#+PLOT: set:grid
So, to set an axis label, I tried
#+PLOT: set:xlabel("Frequency")
and
#+PLOT: set:xlabel "Frequency"
and a few other things, but didn't hit on the right combination. What's the
correct syntax?
--snip--
>
> Notice that you are missing an hline in your table after the headers.
>
Sorry, I should have seen that.
>
> > When I try to use the deps option, I either get an error or an undesired
> result. For example, if I include
> > a "deps:3,4", I get a "Wrong type argument" error. If I enclose the 3,4
> in single quotes (eg. deps:'3,4'),
>
>
> Currently no there is not. In the current setup all of the plot lines
> adjacent to a table are collected and used to generate a single plot for
> the table. I does seem like a good idea to allow multiple plots from a
> single table. Two ideas that come to mind are...
>
> 1) keep all of the plot lines adjacent with the table, but number them
> into any number of different plots. For example the following would
> specify plots 1 and 2 for a table
>
> #+PLOT1: title:"the first plot"
> #+PLOT1: ind:1 with:points
> #+PLOT2: title:"the second plot on the same table"
> #+PLOT2: ind:2 deps:(3 4) with:lines
> | Frequency | Amplitude | Phase | Delta | Peak |
> |---+---+---+---+--|
> | 0.9 | 9 | 6 | 5 | 198 |
> | 1.0 |10 | 9 | 7 | 212 |
> | 1.1 |11 | 8 | 3 | 144 |
> | 9.9 |19 |12 | 9 | 235 |
> | 10.0 |18 | 7 |12 | 222 |
> | 10.1 |22 |14 | 4 | 187 |
> | 19.9 |14 |11 | 6 | 220 |
> | 20.0 |20 |15 |14 | 213 |
> | 20.1 |18 |16 |11 | 201 |
>
> 2) the only other mechanism which occurs to me is to somehow label the
> table with a unique ID, and then allow the plot lines to be located
>
This feature (multiple plots from a single table) would be a very nice
addition, with either approach.
>
>
> Thanks for the bug reports and ideas -- Eric
>
You're welcome, and thanks for your help.
Jerry
___
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Re: Enhancement request : publish page limits
Richard,
there is a tutorial at org/worg:
http://orgmode.org/worg/org-tutorials/org-publish-html-tutorial.php
which shows how I handle the HTML export here. It's shorter to read,
than the old org-info documentation, and covers a nice way to handle
recursive exporting of entire directory trees and glue them together
by org-info.js.
I like this example most, currently, since it shows how `i TAB' is
handled with fixed-toc:
http://orgmode.org/worg/org-faq.php
Regards,
Sebastian
> Sebastian Rose <[EMAIL PROTECTED]> writes:
>> Patch to fix this in doc/org.texi (pulled an hour ago).
>>
>>
>> diff --git a/doc/org.texi b/doc/org.texi
>> index 0ae852e..b2ce486 100644
>> --- a/doc/org.texi
>> +++ b/doc/org.texi
>> @@ -7688,7 +7688,7 @@ as well, press @kbd{?} for an overview of the
>> available keys). The second
>> view type is a @emph{folding} view much like Org provides it inside Emacs.
>> The script is available at @url{http://orgmode.org/org-info.js} and you can
>> find the documentation for it at
>> [EMAIL PROTECTED]://orgmode.org/worg/code/org-info-js/org-info.js.html}. We
>> are
>> [EMAIL PROTECTED]://orgmode.org/worg/code/org-info-js/index.html}. We are
>> serving the script from our site, but if you use it a lot, you might not
>> want
>> to be dependent on @url{orgmode.org} and prefer to install a local copy on
>> your own web server.
>>
>>
>> Richard Riley <[EMAIL PROTECTED]> writes:
>>> Hi,
>>>
>>> Do you have an example?
>>>
>>> The link
>>>
>>> http://orgmode.org/worg/code/org-info-js/org-info.js.html
>>>
>>> mentioned in the info file is dead.
>>>
>>> r.
>>>
>>>
>>> Sebastian Rose <[EMAIL PROTECTED]> writes:
>>>
org-info.js ;-)
???
Make the de facto standard for viewing text in the internet !!!
:-D
Richard Riley <[EMAIL PROTECTED]> writes:
> I didn't spot anything in the manual, but it would be nice if publish
> automatically split large published org files into multiple html files
> based on a "num entries per page" setting. This would then effectively
> work as a handy blogging client IMO (ok no replies etc). Clearly it
> would need to render a navigation widget too. (page 1,2,4,5 .. next 5 )
> etc. Does anyone have something like this or suggestions along the same
> path?
--
Sebastian Rose, EMMA STIL - mediendesign, Niemeyerstr.6, 30449 Hannover
Tel.: +49 (0)511 - 36 58 472
Fax: +49 (0)1805 - 233633 - 11044
mobil: +49 (0)173 - 83 93 417
Email: [EMAIL PROTECTED], [EMAIL PROTECTED]
Http: www.emma-stil.de
___
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Re: Any iPhone devellopers here
Hi, Just thought I'd see if there were any reactions, positive or negative, to this idea. Cheers, David On Mon, Oct 13, 2008 at 10:45 AM, David Neu <[EMAIL PROTECTED]> wrote: > Hi Carsten, > > I'm new to orgmode, and must say that I've found it be an incredibly > intuitive and powerful emacs mode! > > When I saw this thread it resonated with my search for a strategy for > doing GTD while using a list app that isn't "mobile". That is, if you > don't have your list manager with you in different contexts (e.g. > @errands, @phone), it seems "challenging" to work from your lists. > The only context in which I seem to have my lists available is > @computer. I guess I could print out my lists, check off completed > items or add new items, but this seems suboptimal. > > I am a developer, but not an iPhone developer, and had the following > idea. Suppose you restrict your goal to: have orgmode actions and > appointments available on your mobile device (i.e. iPhone), and have > these items truly synchronized between orgmode and the iPhone; changes > in orgmode would be reflected on the iPhone and vice versa. > > Now, if you use the Calendar Store as the mechanism for exchange (see > http://developer.apple.com/leopard/overview/calendarstore.html), then > in view of > >> 1. We do now have a system to assign unique IDs to entries, so the >> cross-identification could be made to work. > > it seems that the goal can be accomplished. > > The strategy is based on not trying to get an orgmode app going on a > mobile device, but getting your actions and appoinments synchronized > between orgmode and iCal, and if you have an iPhone, Apple handles the > synchronization between your Mac and your iPhone for you. Therefore, > if implemented, the functionality could even be used by orgmode Mac > users without an iPhone. > > I hope this reply is on topic, and would be interested in your thoughts. > > Thanks for orgmode! > > Cheers, > David > ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] calling org-remember with an argument to select remember-type?
Hey all I am trying to call org-remember and automatically select making a journal entry (associated with the character "j"). I have tried the following: (org-remember "j") (org-remember ?J) describe-function on org-remember mentions org-force-remember-template-char so I have also tried: (let ((org-force-remember-template-char ?j)) (org-remember)) (let ((org-force-remember-template-char "j")) (org-remember)) But all of these display the prompt to select which remember-type to create. As might be apparent I am not really proficient in elisp, so I am hoping you guys can help me out kind regards Søren Pedersen ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] calling org-remember with an argument to select remember-type?
On Thu, Oct 23, 2008 at 12:48 AM, Søren Pedersen wrote: > Hey all > > I am trying to call org-remember and automatically select making a journal entry > (associated with the character "j"). > > I have tried the following: > > (org-remember "j") > (org-remember ?J) > > describe-function on org-remember mentions org-force-remember-template-char so I > have also tried: > > (let ((org-force-remember-template-char ?j)) > (org-remember)) > > (let ((org-force-remember-template-char "j")) > (org-remember)) > > But all of these display the prompt to select which remember-type to create. > Following section of manual seems to suggests that you have more than one template defined and available in that specific mode. ,[ http://orgmode.org/manual/Remember-templates.html#Remember-templates ] | When you call M-x org-remember (or M-x remember) to remember | something, Org will prompt for a key to select the template (if you | have more than one template) and then prepare the buffer [...] ` So either you need to delete other templates or if you call this template in a specific mode then you can consider defining template so that it is the only available template in that mode (please see the URL of the quoted section for details.) I haven't had a chance to test this yet but seems like a plausible solution. HTH, -- Manish ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] how to wrap headings
Hi, I just have a simple question: how can I wrap the headings so they don't go off the visual window? Thanks, Rich ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] how to wrap headings
On Wed, 22 Oct 2008 23:23:54 +0200 "Rich E" <[EMAIL PROTECTED]> wrote: > Hi, > > I just have a simple question: how can I wrap the headings so they > don't go off the visual window? > > Thanks, > Rich > > > ___ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > A simple approach that will work for all lines is 'toggle-truncate-lines'. If you are using a recent development version of Emacs, you can try 'visual-line-mode', which will also affect all lines in the file. -- Mike ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: how to wrap headings
"Rich E" <[EMAIL PROTECTED]> writes: > I just have a simple question: how can I wrap the headings so they > don't go off the visual window? M-x set-truncate-lines It toggles line wrapping on and off. -Bernt ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] org-plot questions
JBash <[EMAIL PROTECTED]> writes:
> Thanks, Eric!
>
> It's a great tool... I like how it, within org, makes it easy to keep the
> data organized an yet easily
> accessible.
>
Thanks, I'm happy it's proving useful.
>
> Another quick org-plot question...
>
> I found that to turn on the grid, I use:
> #+PLOT: set:grid
>
> So, to set an axis label, I tried
> #+PLOT: set:xlabel("Frequency")
> and
> #+PLOT: set:xlabel "Frequency"
> and a few other things, but didn't hit on the right combination. What's the
> correct syntax?
>
try
#+PLOT: set:"xlabel 'Frequency'"
You need the double " quotes for any argument that contains spaces, and
gnuplot requires quotes (in this case using single ' quotes) around the
argument to xlabel.
I agree this isn't obvious, if you have a suggestion for improving the
syntax please let me know.
> Currently no there is not. In the current setup all of the plot lines
> adjacent to a table are collected and used to generate a single plot for
> the table. I does seem like a good idea to allow multiple plots from a
> single table. Two ideas that come to mind are...
>
> 1) keep all of the plot lines adjacent with the table, but number them
> into any number of different plots. For example the following would
> specify plots 1 and 2 for a table
>
> #+PLOT1: title:"the first plot"
> #+PLOT1: ind:1 with:points
> #+PLOT2: title:"the second plot on the same table"
> #+PLOT2: ind:2 deps:(3 4) with:lines
> | Frequency | Amplitude | Phase | Delta | Peak |
> |---+---+---+---+--|
> | 0.9 | 9 | 6 | 5 | 198 |
> | 1.0 |10 | 9 | 7 | 212 |
> | 1.1 |11 | 8 | 3 | 144 |
> | 9.9 |19 |12 | 9 | 235 |
> | 10.0 |18 | 7 |12 | 222 |
> | 10.1 |22 |14 | 4 | 187 |
> | 19.9 |14 |11 | 6 | 220 |
> | 20.0 |20 |15 |14 | 213 |
> | 20.1 |18 |16 |11 | 201 |
>
> 2) the only other mechanism which occurs to me is to somehow label the
> table with a unique ID, and then allow the plot lines to be located
>
> This feature (multiple plots from a single table) would be a very nice
> addition, with either approach.
I agree, if I find time I will look at implementing it.
Thanks -- Eric
___
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: calling org-remember with an argument to select remember-type?
Manish gmail.com> writes: > > On Thu, Oct 23, 2008 at 12:48 AM, Søren Pedersen wrote: > > Hey all > > > > I am trying to call org-remember and automatically select making a > journal entry I figured it out myself (by, what else, reading the source): (org-remember nil ?j) Does what I want. org-remember takes 2 optional variables, the first one designating whether to jump directly to the place where the rememeber will be placed, and the second one being what I was looking for. kind regards Søren Pedersen ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] [PATCH] Fixed trivial misspelling in docstring to org-refile.
--- lisp/org.el |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/lisp/org.el b/lisp/org.el index d9cf394..30a9ce7 100644 --- a/lisp/org.el +++ b/lisp/org.el @@ -7243,7 +7243,7 @@ and will therefore always be up-to-date. At the target location, the entry is filed as a subitem of the target heading. Depending on `org-reverse-note-order', the new subitem will either be the -first of the last subitem. +first or the last subitem. With prefix arg GOTO, the command will only visit the target location, not actually move anything. -- 1.5.6.4 ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] Re: Fix Subtle Heading Creation Bugs
Carsten Dominik <[EMAIL PROTECTED]> writes: > I have applied your full patch, thanks. > > Please verify the push, I did have a little technical problem when > applying, so please make sure it worked correctly. Almost, I must have forgotten this: diff --git a/lisp/org.el b/lisp/org.el index ad0f106..5bca9e8 100644 --- a/lisp/org.el +++ b/lisp/org.el @@ -4694,7 +4694,7 @@ but create the new hedline after the current line." If the heading has no TODO state, or if the state is DONE, use the first state (TODO by default). Also with prefix arg, force first state." (interactive "P") - (when (not (org-insert-item 'checkbox)) + (when (or force-heading (not (org-insert-item 'checkbox))) (org-insert-heading force-heading) (save-excursion (org-back-to-heading) -- Peter Jones, http://pmade.com pmade inc. Louisville, CO US ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Re: how to wrap headings
Funny enough, yesterday I wrote this one here: (defun my-toggle-truncate-lines () "Toggle truncate-lines." (interactive) (setq truncate-lines (if truncate-lines nil t))) I've bound it to H-t (I like those windows keys in Linux/GNU :-) and use it a lot (since yesterday). It's so usefull, that I wonder if something like this is in emacs already??? Bernt Hansen wrote: "Rich E" <[EMAIL PROTECTED]> writes: I just have a simple question: how can I wrap the headings so they don't go off the visual window? M-x set-truncate-lines It toggles line wrapping on and off. -Bernt ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] org-plot questions
On Wed, Oct 22, 2008 at 15:43, Eric Schulte <[EMAIL PROTECTED]> wrote: > I agree this isn't obvious, if you have a suggestion for improving the > syntax please let me know. I haven't looked into this matter, so this comment might not be relevant, but I do have a suggestion that I had earlier written for the *general* problem of choosing a syntax for new functionality when you don't have obvious models to follow. Some of the desiderata for a syntax include: consistent, easy to parse, hard to corrupt, simple to quote, simple to escape (especially with things like regexps that are already complicated), supports being confident that exporting will not exhibit unexpected behavior, easier for the user to remember without reference materials, flexible, extensible, supports macros, nestable, pretty-printable, a published reference standard, and print-readable (serializing). If your syntax has those, then you're doing well. If you don't have a model to follow (such as org or gnuplot), then Lisp (el because this is el or cl because it's a standard that is similar to el and meticulously speced) has usually had a lot of thought put into its syntax. You might get a joke or two, but we know better. :) Again, perhaps not relevant, but maybe food for thought for future questions about syntax. ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[Orgmode] How to remove the automatically generated css codes from exported HTML file?
Hi, I want to remove the css style codes generated automatically by Org-mode in the exported html file, I have set the variable style for html export and itself works fine, but the css definition generated by Org-mode automatically doesn't get removed, and it affects the display of exported file, how can I remove it? Thanks :) -- -- Larry.Liu Mobile: 13911483964 --- ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] Re: Fix Subtle Heading Creation Bugs
Applied, thanks. - Carsten On Oct 23, 2008, at 2:30 AM, Peter Jones wrote: Carsten Dominik <[EMAIL PROTECTED]> writes: I have applied your full patch, thanks. Please verify the push, I did have a little technical problem when applying, so please make sure it worked correctly. Almost, I must have forgotten this: diff --git a/lisp/org.el b/lisp/org.el index ad0f106..5bca9e8 100644 --- a/lisp/org.el +++ b/lisp/org.el @@ -4694,7 +4694,7 @@ but create the new hedline after the current line." If the heading has no TODO state, or if the state is DONE, use the first state (TODO by default). Also with prefix arg, force first state." (interactive "P") - (when (not (org-insert-item 'checkbox)) + (when (or force-heading (not (org-insert-item 'checkbox))) (org-insert-heading force-heading) (save-excursion (org-back-to-heading) -- Peter Jones, http://pmade.com pmade inc. Louisville, CO US ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
Re: [Orgmode] How to remove the automatically generated css codes from exported HTML file?
This thread might help. http://thread.gmane.org/gmane.emacs.orgmode/7156 On Thu, Oct 23, 2008 at 10:25 AM, Larry. Liu wrote: > Hi, > > I want to remove the css style codes generated automatically by Org-mode in > the exported html file, I have set the variable style for html export and > itself works fine, but the css definition generated by Org-mode > automatically doesn't get removed, and it affects the display of exported > file, how can I remove it? > > Thanks :) > > -- > -- > Larry.Liu > Mobile: 13911483964 > --- ___ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode
