Bug#802186: xserver-xorg-video-ati: Complete system lockup after some time when using radeon driver in xorg.conf

2015-10-18 Thread Gianluca Renzi 
Package: xserver-xorg-video-ati
Version: 1:7.5.0-1+b1
Severity: important

Dear Maintainer,

the latest xorg driver suffers a couple of severity issues and they can lead to 
a unusable X setup, or a
complete locked-up system (only hard reset is the only way to recover from 
this...)

1- It seems the xorg probe procedure is unable to create a valid xorg 
configuration if there is no /etc/X11/xorg at all.
   This issue can be workarounded creating a simple and valid xorg.conf with a 
valid BusID card location.
   If BusID is missing the Xorg crashes with a segfault. Not a big issue for 
me...

2- when the radeon driver in xorg.conf is used, the system is usable for 30/45 
minutes (even if it remains in idle for most
   of the time) then hangs. All resources are locked, and curiously if a audio 
playing was running a DMA-loop-whatever 
   is playing the last chunk of audio-data in the audio buffer. I suspect a 
complete CPU hang.
   The system is using the drm radeon driver as usual and no problems when 
starting-up the system.
   If I switch to fbdev in xorg.conf (i.e. it still uses the kernel drm driver 
anyway) the system runs fine forever...
   This architecture has two video boards installed: a NVIDIA 6600 with 
OpenFirmware Flash in the slower PCI-E Bus 8X and
   a BIOS Flashed ATI-RadeonHD 4670 in the faster bus lane PCI-E 16X.

3- The kernel cmdline is the following:
   video=offb:off nouveau.modeset=1 nouveau.noaccel=1 radeon.modeset=1 
radeon.agpmode=-1 fastboot loglevel=3

Not speaking about the 3d Mesa/Gallium support that it is *COMPLETELY BROKEN* 
here. But this is another story.


-- Package-specific info:
X server symlink status:

lrwxrwxrwx 1 root root 13 May 16 00:43 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 274 Oct  8 12:09 /usr/bin/Xorg

VGA-compatible devices on PCI bus:
--
:0a:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. 
[AMD/ATI] RV730 XT [Radeon HD 4670] [1002:9490]
0001:06:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV43 [GeForce 
6600] [10de:0141] (rev a2)

Xorg X server configuration file status:

-rw-r--r-- 1 root root 10130 Oct 13 20:41 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
---
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0  "Screen0" 0 0
InputDevice"Mouse0" "CorePointer"
InputDevice"Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath   "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "built-ins"
EndSection

Section "Module"
Load  "glx"
Load  "dri"
Load  "dri2"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver  "kbd"
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver  "mouse"
Option  "Protocol" "auto"
Option  "Device" "/dev/input/mice"
Option  "ZAxisMapping" "4 5 6 7"
EndSection

# Option "SWcursor" "boolean" Selects software cursor. The default is off.
# Option "NoAccel" "boolean" Enables or disables all hardware acceleration. The 
default is to enable hardware acceleration.
# Option "ZaphodHeads" "string" Specify the RandR output(s) to use with
#   zaphod mode for a particular driver instance.
#   If you use this option you must use this
#   option for all instances of the driver.
#   For example:
#   Option "ZaphodHeads" "LVDS,VGA-0"
#   will assign xrandr outputs LVDS and VGA-0 to 
this instance of the driver.
# Option "EXAVSync" "boolean" This option attempts to avoid tearing by 
# stalling the engine until the display controller
# has passed the destination region. It reduces 
# tearing at the cost of performance and has been 
known
# to cause instability on some chips. The default 
is off.

# The following driver Options are supported for KMS (Kernel Modesetting):

# Option "ColorTiling" "boolean" The framebuffer can be addressed either
#in linear or tiled mode. Tiled mode can provide
#significant performance benefits with 3D 
applications.
#Tiling will be disabled if the drm module is 
too old or
#if the current display configuration does not 
support it.
#On R6

Bug#801487: introducing xserver-xorg-legacy without telling anybody?

2015-10-18 Thread Harald Dunkel 
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256

On 10/17/15 23:26, Julien Cristau wrote:
> On Sat, Oct 17, 2015 at 05:34:19 +0200, Harald Dunkel wrote:
> 
>> 
>> Since when?
>> 
> Ever since X has been able to work as non-root, i.e. when logind support was 
> added...
> 

Sorry to say, but thats BS. I am running X on sid right now without
being root. No logind installed.

If the xinit package depends upon either logind or xserver-xorg-\
legacy to work, then its dependecies should say so. There is
surely no "root-only" mentioned in startx(1) or xinit(1).


Regards
Harri

-BEGIN PGP SIGNATURE-
Version: GnuPG v2

iQEcBAEBCAAGBQJWI0z9AAoJEAqeKp5m04HL9wwH/jvMCIGfi99AZZ8FXhkbuUeJ
mKxnanGGwE6pFEB1AJqw7g+Ht3PXgswgAS1J1l+4LvLSNOEFqeWmJkmhc4kX2g/7
yMXP/ls5CGasBI/+XX2nxvd9pMp0RFgOz1fKZDgaXNIEBGfDeUkjVJLYgNzDw6+c
KPs5/jnUKwh9Y8cLUs/omyU9/QNOyPpynw8iwVNzPrMa95blND+LX8eoAyOofBSv
d5kFtKYngq9QnRSWddmPHL3sjmnUfwUim2Fu5YvAxfirYBhIZ70WQF5xOYiRpnQW
wsJP9S2c2C5pptyLe0sPA+ZzAnDcXTK8D/kfqVEWbbTx6YEWcjntUJ9VqFafbPw=
=LiQp
-END PGP SIGNATURE-

xorg: Changes to 'debian-unstable'

2015-10-18 Thread Andreas Boll 
 debian/README.source   |   24 -
 debian/changelog   |1 
 debian/xsfbs/repack.sh |   32 --
 debian/xsfbs/xsfbs.mk  |  285 --
 debian/xsfbs/xsfbs.sh  |  622 -
 5 files changed, 1 insertion(+), 963 deletions(-)

New commits:
commit f2441a8995bfb0699537ec3c44a0b7b4db7417f7
Author: Andreas Boll 
Date:   Sun Oct 18 20:28:10 2015 +0200

Delete obsolete debian/xsfbs.

diff --git a/debian/README.source b/debian/README.source
index b09a1ab..4ecd5e6 100644
--- a/debian/README.source
+++ b/debian/README.source
@@ -47,27 +47,3 @@ are involved:
   case, it appears directly in the .diff.gz.
 * Otherwise, the patch is added to debian/patches/ which is managed
   with quilt as documented in /usr/share/doc/quilt/README.source.
-
-quilt is actually invoked by the Debian X packaging through a larger
-set of scripts called XSFBS. XSFBS brings some other X specific
-features such as managing dependencies and conflicts due to the video
-and input driver ABIs.
-XSFBS itself is maintained in a separate repository at
-  git://git.debian.org/pkg-xorg/xsfbs.git
-and it is pulled inside the other Debian X repositories when needed.
-
-The XSFBS patching system requires a build dependency on quilt. Also
-a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
-so that the XSFBS patching occurs before the actual build. So the
-very first target of the build (likely the one running autoreconf)
-should depend on $(STAMP_DIR)/patch. It should also not depend on
-anything so that parallel builds are correctly supported (nothing
-should probably run while patching is being done). And finally, the
-clean target should depend on the xsfclean target so that patches
-are unapplied on clean.
-
-When the upstream sources contain some DFSG-nonfree files, they are
-listed in text files in debian/prune/ in the "debian-*" branch of
-the Debian repository. XSFBS' scripts then take care of removing
-these listed files during the build so as to generate a modified
-DFSG-free .orig.tar.gz tarball.
diff --git a/debian/changelog b/debian/changelog
index e38c23a..7f59c09 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -4,6 +4,7 @@ xorg (1:7.7+13) UNRELEASED; urgency=medium
 - makefile: Set TZ=UTC before calling asciidoc (Closes: #795985).
   Thanks, Eduard Sanou!
   * rules: Remove unused variable ARCH.
+  * Delete obsolete debian/xsfbs.
 
  -- Andreas Boll   Tue, 13 Oct 2015 11:04:42 +0200
 
diff --git a/debian/xsfbs/repack.sh b/debian/xsfbs/repack.sh
deleted file mode 100755
index 5935cc9..000
--- a/debian/xsfbs/repack.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-
-set -e
-
-if ! [ -d debian/prune ]; then
-   exit 0
-fi
-
-if [ "x$1" != x--upstream-version ]; then
-   exit 1
-fi
-
-version="$2"
-filename="$3"
-
-if [ -z "$version" ] || ! [ -f "$filename" ]; then
-   exit 1
-fi
-
-dir="$(pwd)"
-tempdir="$(mktemp -d)"
-
-cd "$tempdir"
-tar xf "$dir/$filename"
-cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
-
-tar czf "$dir/$filename" *
-cd "$dir"
-rm -rf "$tempdir"
-echo "Done pruning upstream tarball"
-
-exit 0
diff --git a/debian/xsfbs/xsfbs.mk b/debian/xsfbs/xsfbs.mk
deleted file mode 100755
index 3c59c20..000
--- a/debian/xsfbs/xsfbs.mk
+++ /dev/null
@@ -1,285 +0,0 @@
-#!/usr/bin/make -f
-
-# Debian X Strike Force Build System (XSFBS): Make portion
-
-# Copyright 1996 Stephen Early
-# Copyright 1997 Mark Eichin
-# Copyright 1998-2005, 2007 Branden Robinson
-# Copyright 2005 David Nusinow
-#
-# Licensed under the GNU General Public License, version 2.  See the file
-# /usr/share/common-licenses/GPL or .
-
-# Originally by Stephen Early 
-# Modified by Mark W. Eichin 
-# Modified by Adam Heath 
-# Modified by Branden Robinson 
-# Modified by Fabio Massimo Di Nitto 
-# Modified by David Nusinow 
-# Acknowledgements to Manoj Srivastava.
-
-# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
-export DH_OPTIONS
-
-# force quilt to not use ~/.quiltrc and to use debian/patches
-QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
-
-# Set up parameters for the upstream build environment.
-
-# Determine (source) package name from Debian changelog.
-SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
-| grep '^Source:' | awk '{print $$2}')
-
-# Determine package version from Debian changelog.
-SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
-| grep '^Version:' | awk '{print $$2}')
-
-# Determine upstream version number.
-UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
-
-# Determine the source version without the epoch for make-orig-tar-gz
-NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
-
-# Figure out who's building this package.
-BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat 
/etc/mailname 2>/dev/null))}})
-
-# Find out if

Bug#802275: xserver-xorg-core: X crashes after X -configure

2015-10-18 Thread Christian Stalp 
Package: xserver-xorg-core
Version: 2:1.17.2-3
Severity: normal

Dear Maintainer,

   * What led up to the situation?
I wanted to create a new xorg.conf for my Thinkpad X60s and my 19" display
attached to the docking station. In order to do that, I followed this
guideline: http://www.thinkwiki.org/wiki/Xorg_RandR_1.2
   * What exactly did you do (or not do) that was effective (or
 ineffective)?
I stoped the X-server with "service lightdm stop" and put in "X -configure"

   * What was the outcome of this action?
I got this error-dump without special information:
X.Org X Server 1.17.2
Release Date: 2015-06-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
Current Operating System: Linux psyche 4.2.0-1-686-pae #1 SMP Debian 4.2.3-2
(2015-10-14) i686
Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-1-686-pae root=UUID=2e8153c3
-f74e-4aa7-a040-56cddec955c2 ro quiet
Build Date: 08 October 2015  10:05:01AM
xorg-server 2:1.17.2-3 (http://www.debian.org/support)
Current version of pixman: 0.33.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 18 23:28:13 2015
List of video drivers:
vmware
ztv
trident
tdfx
sisusb
siliconmotion
savage
r128
openchrome
nouveau
neomagic
mga
mach64
geode
cirrus
radeon
ati
intel
qxl
vesa
fbdev
modesetting
(EE)
(EE) Backtrace:
(EE) 0: /usr/lib/xorg/Xorg (xorg_backtrace+0x52) [0x80221cc2]
(EE) 1: /usr/lib/xorg/Xorg (0x8007d000+0x1a9072) [0x80226072]
(EE) 2: linux-gate.so.1 (__kernel_rt_sigreturn+0x0) [0xb770abc8]
(EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb46a+0xdd2e)
[0xb46add2e]
(EE) 4: /usr/lib/xorg/Xorg (0x8007d000+0xa1d08) [0x8011ed08]
(EE) 5: /usr/lib/xorg/Xorg (0x8007d000+0xa1e66) [0x8011ee66]
(EE) 6: /usr/lib/xorg/Xorg (0x8007d000+0xa2676) [0x8011f676]
(EE) 7: /usr/lib/xorg/Xorg (xf86CallDriverProbe+0x26) [0x800f1396]
(EE) 8: /usr/lib/xorg/Xorg (DoConfigure+0xd8) [0x800f0278]
(EE) 9: /usr/lib/xorg/Xorg (InitOutput+0x12e5) [0x801011f5]
(EE) 10: /usr/lib/xorg/Xorg (0x8007d000+0x4260f) [0x800bf60f]
(EE) 11: /usr/lib/xorg/Xorg (0x8007d000+0x2c32a) [0x800a932a]
(EE) 12: /lib/i386-linux-gnu/i686/cmov/libc.so.6 (__libc_start_main+0xf3)
[0xb7281a63]
(EE) 13: /usr/lib/xorg/Xorg (0x8007d000+0x2c368) [0x800a9368]
(EE)
(EE) Segmentation fault at address 0x18
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
(EE)
(EE)
Please consult the The X.Org Foundation support
 at http://wiki.x.org
 for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional
information.
(EE)
(EE) Server terminated with error (1). Closing log file.





[   28.855515] fbcon: inteldrmfb (fb0) is primary device
[   28.987492] i915 :00:02.0: fb0: inteldrmfb frame buffer device



-- System Information:
Debian Release: stretch/sid
  APT prefers unstable
  APT policy: (700, 'unstable'), (650, 'testing'), (630, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 4.2.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages xserver-xorg-core depends on:
ii  keyboard-configuration1.133
ii  libaudit1 1:2.4.4-4
ii  libc6 2.19-22
ii  libdbus-1-3   1.10.0-3
ii  libdrm2   2.4.64-1
ii  libegl1-mesa  10.6.8-1
ii  libepoxy0 1.3.1-1
ii  libgbm1   10.6.8-1
ii  libgcrypt20   1.6.4-3
ii  libgl1-mesa-glx [libgl1]  10.6.8-1
ii  libpciaccess0 0.13.4-1
ii  libpixman-1-0 0.33.2-2
ii  libselinux1   2.3-2+b1
ii  libudev1  227-2
ii  libxau6   1:1.0.8-1
ii  libxdmcp6 1:1.1.2-1
ii  libxfont1 1:1.5.1-1
ii  libxshmfence1 1.2-1
ii  udev  227-2
ii  xserver-common2:1.17.2-3

Versions of packages xserver-xorg-core recommends:
ii  libgl1-mesa-dri  10.6.8-1

Versions of packages xserver-xorg-core suggests:
pn  xfonts-100dpi | xfonts-75dpi  
pn  xfonts-scalable   

-- no debconf information
[  1318.117] 
X.Org X Server 1.17.2
Release Date: 2015-06-16
[  1318.117] X Protocol Version 11, Revision 0
[  1318.117] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[  1318.117] Current Operating System: Linux psyche 4.2.0-1-686-pae #1 SMP 
Debian 4.2.3-2 (2015-10-14) i686
[  1318.117] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-1-

Processed: limit source to xinit, tagging 790433

2015-10-18 Thread Debian Bug Tracking System 
Processing commands for cont...@bugs.debian.org:

> limit source xinit
Limiting to bugs with field 'source' containing at least one of 'xinit'
Limit currently set to 'source':'xinit'

> tags 790433 + pending
Bug #790433 [xinit] xinit: /etc/X11/xinit/xinitrc is not executable
Added tag(s) pending.
> thanks
Stopping processing here.

Please contact me if you need assistance.
-- 
790433: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=790433
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems

xinit: Changes to 'debian-unstable'

2015-10-18 Thread Laurent Bigonville 
 debian/changelog  |6 ++
 debian/xinit.postinst |   31 +++
 2 files changed, 37 insertions(+)

New commits:
commit a8e678a1d5a18d47f57d97546ce8a377ce5852be
Author: Laurent Bigonville 
Date:   Mon Oct 19 01:28:38 2015 +0200

Make /etc/X11/xinit/xinitrc on upgrade too (Closes: #790433)

diff --git a/debian/changelog b/debian/changelog
index f11e7b0..f67b851 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,9 @@
+xinit (1.3.4-2) UNRELEASED; urgency=medium
+
+  * Make /etc/X11/xinit/xinitrc on upgrade too (Closes: #790433)
+
+ -- Laurent Bigonville   Mon, 19 Oct 2015 01:27:14 +0200
+
 xinit (1.3.4-1) unstable; urgency=medium
 
   * Team upload.
diff --git a/debian/xinit.postinst b/debian/xinit.postinst
new file mode 100644
index 000..e0d08f6
--- /dev/null
+++ b/debian/xinit.postinst
@@ -0,0 +1,31 @@
+#!/bin/sh
+# postinst script for xinit
+#
+# see: dh_installdeb(1)
+
+set -e
+
+case "$1" in
+configure)
+   if dpkg --compare-versions "$2" lt-nl "1.3.4-2~"; then
+if ! dpkg-statoverride --list /etc/X11/xinit/xinitrc >/dev/null 
2>&1; then
+chmod 0755 /etc/X11/xinit/xinitrc
+fi
+   fi
+;;
+
+abort-upgrade|abort-remove|abort-deconfigure)
+;;
+
+*)
+echo "postinst called with unknown argument \`$1'" >&2
+exit 1
+;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

xinit: Changes to 'debian-unstable'

2015-10-18 Thread Laurent Bigonville 
 debian/changelog |2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

New commits:
commit c20b96c0f2370b68d9cc2760baa2f9a9a052f5fb
Author: Laurent Bigonville 
Date:   Mon Oct 19 01:35:35 2015 +0200

Fix changelog

diff --git a/debian/changelog b/debian/changelog
index f67b851..d676286 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,6 +1,6 @@
 xinit (1.3.4-2) UNRELEASED; urgency=medium
 
-  * Make /etc/X11/xinit/xinitrc on upgrade too (Closes: #790433)
+  * Make /etc/X11/xinit/xinitrc executable on upgrade too (Closes: #790433)
 
  -- Laurent Bigonville   Mon, 19 Oct 2015 01:27:14 +0200

Bug#790433: marked as done (xinit: /etc/X11/xinit/xinitrc is not executable)

2015-10-18 Thread Debian Bug Tracking System 
Your message dated Mon, 19 Oct 2015 01:19:48 +
with message-id 
and subject line Bug#790433: fixed in xinit 1.3.4-2
has caused the Debian Bug report #790433,
regarding xinit: /etc/X11/xinit/xinitrc is not executable
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
790433: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=790433
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: xinit
Version: 1.3.4-1
Severity: normal

xinit (1.3.4-1) unstable; urgency=medium
[...]
  * debian/rules: Make /etc/X11/xinit/xinitrc executable to make lintian happy
and also to fix LP: #491696

But on two of my Debian/unstable machines, /etc/X11/xinit/xinitrc is
still not executable. On a new Debian/unstable machine, it is however
executable. Such an inconsistency is quite bad for maintenance.

-- System Information:
Debian Release: stretch/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 
'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.0.0-2-amd64 (SMP w/8 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)

Versions of packages xinit depends on:
ii  coreutils   8.23-4
ii  libc6   2.19-18
ii  libx11-62:1.6.3-1
ii  x11-common  1:7.7+9
ii  xauth   1:1.0.9-1

Versions of packages xinit recommends:
ii  aterm [x-terminal-emulator]  1.0.1-8+b2
ii  fvwm [x-window-manager]  1:2.5.30.ds-1.1+local1
ii  gnome-session [x-session-manager]3.16.0-1
ii  gnome-session-flashback [x-session-mana  3.17.2-2
ii  gnome-terminal [x-terminal-emulator] 3.16.2-1
ii  icewm [x-window-manager] 1.3.8+githubmod+20150412+960629d-1
ii  metacity [x-window-manager]  1:3.17.2-3+b1
ii  mutter [x-window-manager]3.16.2-2
ii  roxterm-gtk3 [x-terminal-emulator]   2.9.5-1
ii  rxvt-unicode [x-terminal-emulator]   9.21-1
ii  stterm [x-terminal-emulator] 0.5+20140606+gitc2fd275-1
ii  tightvncserver [xserver] 1.3.9-6.5
ii  twm [x-window-manager]   1:1.0.9-1
ii  vnc4server [xserver] 4.1.1+X4.3.0-37.6
ii  xfce4-terminal [x-terminal-emulator] 0.6.3-1+b2
ii  xserver-xephyr [xserver] 2:1.17.1-2
ii  xserver-xorg [xserver]   1:7.7+9
ii  xterm [x-terminal-emulator]  318-2
ii  xvfb [xserver]   2:1.17.1-2

xinit suggests no packages.

-- no debconf information
--- End Message ---
--- Begin Message ---
Source: xinit
Source-Version: 1.3.4-2

We believe that the bug you reported is fixed in the latest version of
xinit, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 790...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Laurent Bigonville  (supplier of updated xinit package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)


-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256

Format: 1.8
Date: Mon, 19 Oct 2015 03:13:52 +0200
Source: xinit
Binary: xinit
Architecture: source amd64
Version: 1.3.4-2
Distribution: unstable
Urgency: medium
Maintainer: Debian X Strike Force 
Changed-By: Laurent Bigonville 
Description:
 xinit  - X server initialisation tool
Closes: 790433 801529
Changes:
 xinit (1.3.4-2) unstable; urgency=medium
 .
   * Team upload.
   * Remove xsfbs and switch to dh7
   * Make /etc/X11/xinit/xinitrc executable on upgrade too (Closes: #790433)
   * debian/control: Bump Standards-Version to 3.9.6 (no further changes)
   * d/p/07_Pass-keeptty-on-current-tty.patch: Pass -keeptty when telling the
 server to start on the current tty (Closes: #801529)
Checksums-Sha1:
 cdc15608ee75dfccb46d056461ccfeb7643431c6 1561 xinit_1.3.4-2.dsc
 2a16c4e615b70bd75fd6aa0ff8bef2e538172ef0 12195 xinit_1.3.4-2.diff.gz
 01d04cf01a7211710f3fa5264fff07dc32eb3f13 47414 xinit_1.3.4-2_amd64.deb
Checksums-Sha256:
 98b7248dad91929ee992fb2546437384227516e5573e3ff87402c86ae2066bd9 1561 
xinit_1.3.4-2.dsc
 e2a480c2b0b078fdfa31bd3421ec2fcc040a6dd64e4ee707469e67dfa3afc8b1 12195 
xinit_1.3.4-2.diff.gz
 8ab3e9433b89fcb6b4cbe1d9bf4890d4865edc267a3ea237113286e

Bug#801529: marked as done (xinit: startx fails when output is redirected)

2015-10-18 Thread Debian Bug Tracking System 
Your message dated Mon, 19 Oct 2015 01:19:48 +
with message-id 
and subject line Bug#801529: fixed in xinit 1.3.4-2
has caused the Debian Bug report #801529,
regarding xinit: startx fails when output is redirected
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
801529: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=801529
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: xinit
Version: 1.3.4-1
Severity: normal

Dear Maintainer,

As of my most recent sid upgrade, startx stopped working.
The problem turned out to be that it no longer supports redirection.

I was logging in to tty1 and running this in my .zlogin:

startx >& $HOME/.xsession-errors

As of the upgrade to the "run as user" X server, X fails to start.
It pauses for 5-10 seconds, then exits, leaving the terminal
settings wrong so I have to run reset.

.local/share/xorg/Xorg.0.log says:

[  1000.714] (++) using VT number 1

[  1000.714] (EE) 
Fatal server error:
[  1000.714] (EE) xf86OpenConsole: VT_ACTIVATE failed: Operation not permitted
[  1000.714] (EE) 

Running simply startx, without the redirect, works. But of course I
can no longer check output from programs run inside X.

Some comments on the web suggest that startx -- -keeptty will allow
redirection, but man xinit warns:
This  option is only useful when debugging the server.
Not all platforms support (or can use) this option.
so it seems like that might not be a good long-term option.

Redhat claims to have a fix for the redirection problem:
https://bugzilla.redhat.com/show_bug.cgi?id=1177513#c5
I can't verify whether their fix actually fixes the issue (and I'm
not sure how to find the actual code change involved in the fix,
or whether it was pushed upstream, though I'm guessing not since
that was back in January so Debian hopefully would have it by now).

I haven't been able to find any other way besides redirection to get
stdout and stderr for programs run inside X. Is there a new and
improved way that would make redirection unnecessary?


-- System Information:
Debian Release: stretch/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 3.14-2-686-pae (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages xinit depends on:
ii  coreutils   8.23-4
ii  libc6   2.19-22
ii  libx11-62:1.6.3-1
ii  x11-common  1:7.7+12
ii  xauth   1:1.0.9-1

Versions of packages xinit recommends:
ii  gnome-terminal [x-terminal-emulator]  3.18.0-1
ii  openbox [x-window-manager]3.6.1-1
ii  xserver-xorg [xserver]1:7.7+12
ii  xterm [x-terminal-emulator]   320-1

xinit suggests no packages.

-- no debconf information
--- End Message ---
--- Begin Message ---
Source: xinit
Source-Version: 1.3.4-2

We believe that the bug you reported is fixed in the latest version of
xinit, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 801...@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Laurent Bigonville  (supplier of updated xinit package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmas...@ftp-master.debian.org)


-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256

Format: 1.8
Date: Mon, 19 Oct 2015 03:13:52 +0200
Source: xinit
Binary: xinit
Architecture: source amd64
Version: 1.3.4-2
Distribution: unstable
Urgency: medium
Maintainer: Debian X Strike Force 
Changed-By: Laurent Bigonville 
Description:
 xinit  - X server initialisation tool
Closes: 790433 801529
Changes:
 xinit (1.3.4-2) unstable; urgency=medium
 .
   * Team upload.
   * Remove xsfbs and switch to dh7
   * Make /etc/X11/xinit/xinitrc executable on upgrade too (Closes: #790433)
   * debian/control: Bump Standards-Version to 3.9.6 (no further changes)
   * d/p/07_Pass-keeptty-on-current-tty.patch: Pass -keeptty when telling the
 server to start on the current tty (Closes: #801529)
Checksums-Sha1:
 cdc15608ee75dfccb46d056461ccfeb7643431c6 1561 xinit_1.3.4-2.dsc
 2a16c4e615b70bd75fd6aa0ff8bef2e538172ef0 12195 xinit_1.3.4-2.diff.gz
 01d04cf01a7211710f3fa5264fff07dc32eb3f13 47414 xinit_1.3.4-2_amd64.deb
Checksums-

Processing of xinit_1.3.4-2_amd64.changes

2015-10-18 Thread Debian FTP Masters 
xinit_1.3.4-2_amd64.changes uploaded successfully to localhost
along with the files:
  xinit_1.3.4-2.dsc
  xinit_1.3.4-2.diff.gz
  xinit_1.3.4-2_amd64.deb

Greetings,

Your Debian queue daemon (running on host franck.debian.org)

xinit: Changes to 'debian-unstable'

2015-10-18 Thread Laurent Bigonville 
 debian/changelog|9 
 debian/compat   |2 
 debian/control  |5 
 debian/patches/07_Pass-keeptty-on-current-tty.patch |   32 +
 debian/patches/series   |1 
 debian/rules|   97 ---
 debian/xinit.install|2 
 debian/xsfbs/repack.sh  |   32 -
 debian/xsfbs/xsfbs.mk   |  285 -
 debian/xsfbs/xsfbs.sh   |  622 
 10 files changed, 56 insertions(+), 1031 deletions(-)

New commits:
commit 2f852bed08e9d3886c5d691f5c8dd8c511ddcd48
Author: Laurent Bigonville 
Date:   Mon Oct 19 03:14:00 2015 +0200

Release to unstable

diff --git a/debian/changelog b/debian/changelog
index 4c984a1..ea67453 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,12 +1,13 @@
-xinit (1.3.4-2) UNRELEASED; urgency=medium
+xinit (1.3.4-2) unstable; urgency=medium
 
+  * Team upload.
   * Remove xsfbs and switch to dh7
   * Make /etc/X11/xinit/xinitrc executable on upgrade too (Closes: #790433)
   * debian/control: Bump Standards-Version to 3.9.6 (no further changes)
   * d/p/07_Pass-keeptty-on-current-tty.patch: Pass -keeptty when telling the
 server to start on the current tty (Closes: #801529)
 
- -- Laurent Bigonville   Mon, 19 Oct 2015 02:48:20 +0200
+ -- Laurent Bigonville   Mon, 19 Oct 2015 03:13:52 +0200
 
 xinit (1.3.4-1) unstable; urgency=medium
 

commit 1c38f492aa807041313c4d17f222ac5ba166faf3
Author: Laurent Bigonville 
Date:   Mon Oct 19 02:35:43 2015 +0200

Remove xsfbs and switch to dh7

diff --git a/debian/changelog b/debian/changelog
index e0ce7bb..4c984a1 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,11 +1,12 @@
 xinit (1.3.4-2) UNRELEASED; urgency=medium
 
+  * Remove xsfbs and switch to dh7
   * Make /etc/X11/xinit/xinitrc executable on upgrade too (Closes: #790433)
   * debian/control: Bump Standards-Version to 3.9.6 (no further changes)
   * d/p/07_Pass-keeptty-on-current-tty.patch: Pass -keeptty when telling the
 server to start on the current tty (Closes: #801529)
 
- -- Laurent Bigonville   Mon, 19 Oct 2015 02:00:46 +0200
+ -- Laurent Bigonville   Mon, 19 Oct 2015 02:48:20 +0200
 
 xinit (1.3.4-1) unstable; urgency=medium
 
diff --git a/debian/compat b/debian/compat
index 7ed6ff8..ec63514 100644
--- a/debian/compat
+++ b/debian/compat
@@ -1 +1 @@
-5
+9
diff --git a/debian/control b/debian/control
index e9fdc7b..83291be 100644
--- a/debian/control
+++ b/debian/control
@@ -4,7 +4,8 @@ Priority: optional
 Maintainer: Debian X Strike Force 
 Uploaders: Cyril Brulebois 
 Build-Depends:
- debhelper (>= 5.0.0),
+ debhelper (>= 9),
+ dh-autoreconf,
  pkg-config,
  libx11-dev (>= 2:1.0.0),
  quilt,
diff --git a/debian/rules b/debian/rules
index 388af97..00cae49 100755
--- a/debian/rules
+++ b/debian/rules
@@ -1,97 +1,22 @@
 #!/usr/bin/make -f
 # debian/rules for the Debian xutils package.
-# Copyright © 2004 Scott James Remnant 
-# Copyright © 2005 Daniel Stone 
-# Copyright © 2005 David Nusinow 
 
 # Uncomment this to turn on verbose mode.
 #export DH_VERBOSE=1
 
-include debian/xsfbs/xsfbs.mk
+%:
+   dh $@ --with autoreconf,quilt
 
-DPKG_EXPORT_BUILDFLAGS = 1
-DEB_CFLAGS_MAINT_APPEND = -Wall -g
-include /usr/share/dpkg/buildflags.mk
+override_dh_auto_configure:
+   dh_auto_configure -- --with-xinitdir=/etc/X11/xinit \
+--with-xterm=/usr/bin/xterm
 
-ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
-   NUMJOBS = $(patsubst parallel=%,%,$(filter 
parallel=%,$(DEB_BUILD_OPTIONS)))
-   MAKEFLAGS += -j$(NUMJOBS)
-endif
+override_dh_auto_install:
+   dh_auto_install --destdir=debian/tmp
 
-DEB_HOST_ARCH  ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
-DEB_HOST_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
-   confflags += --build=$(DEB_HOST_GNU_TYPE)
-else
-   confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
-endif
+override_dh_install:
+   dh_install --list-missing
 
-configure: $(STAMP_DIR)/patch
-   autoreconf -vfi
-
-build: build-stamp
-build-stamp: configure $(STAMP_DIR)/genscripts
-   dh_testdir
-
-   mkdir -p build
-   cd build && \
-   ../configure --prefix=/usr --mandir=\$${prefix}/share/man \
---infodir=\$${prefix}/share/info $(confflags) \
---with-xinitdir=/etc/X11/xinit \
---with-xterm=/usr/bin/xterm
-   cd build && $(MAKE) || exit 1
-   >$@
-
-clean: xsfclean
-   dh_testdir
-   dh_testroot
-   rm -f build-stamp
-
-   rm -f config.cache config.log config.status
-   rm -f */config.cache */config.log */config.status
-   rm -f c

xinit: Changes to 'refs/tags/xinit-1.0.4'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.0.4' created by Alan Coopersmith  at 
2007-05-22 03:01 +

xinit Version 1.0.4

Changes since xinit-1.0.3:
Alan Coopersmith (11):
  renamed: .cvsignore -> .gitignore
  Add *~ to .gitignore to skip over emacs/patch droppings
  Change example X server argument from bc to -br now that bc is gone
  Stop hardcoding /usr/X11R6/bin in manpage examples
  Bug #10616: Clarify syntax on xinit & startx man pages
  Don't print windowpath debug messages unless built -DDEBUG
  Replace static ChangeLog with dist hook to generate from git log
  Modernize list of Xservers printed when "X" is not found in $PATH
  Remove support for pre-POSIX-1990 platforms
  Remove old Imake checks now that we always build with autoconf
  Version bump: 1.0.4

Daniel Drake (1):
  Fill in COPYING File (X.Org Bugzilla #11024)

Samuel Thibault (1):
  X.Org Bugzilla #8013: xinit should set WINDOWPATH

---
 .cvsignore   |   22 --
 .gitignore   |   23 ++
 COPYING  |   25 +--
 ChangeLog|  103 --
 Makefile.am  |7 +-
 configure.ac |4 -
 startx.man   |2 
 xinit.c  |  199 +--
 xinit.man|8 +-
 9 files changed, 169 insertions(+), 224 deletions(-)
---

xinit: Changes to 'refs/tags/debian/1.3.4-2'

2015-10-18 Thread Laurent Bigonville 
Tag 'debian/1.3.4-2' created by Laurent Bigonville  at 
2015-10-19 01:14 +

xinit Debian release 1.3.4-2

Changes since xinit-1.3.4-1:
Laurent Bigonville (6):
  Make /etc/X11/xinit/xinitrc on upgrade too (Closes: #790433)
  Fix changelog
  debian/control: Bump Standards-Version to 3.9.6 (no further changes)
  d/p/07_Pass-keeptty-on-current-tty.patch: Pass -keeptty when telling the 
server to start on the current tty (Closes: #801529)
  Remove xsfbs and switch to dh7
  Release to unstable

---
 debian/changelog|   11 
 debian/compat   |2 
 debian/control  |5 
 debian/patches/07_Pass-keeptty-on-current-tty.patch |   32 +
 debian/patches/series   |1 
 debian/rules|   97 ---
 debian/xinit.install|2 
 debian/xinit.postinst   |   31 
 debian/xsfbs/repack.sh  |   32 -
 debian/xsfbs/xsfbs.mk   |  285 -
 debian/xsfbs/xsfbs.sh   |  622 
 11 files changed, 91 insertions(+), 1029 deletions(-)
---

xinit: Changes to 'refs/tags/xinit-1.0.8'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.0.8' created by Adam Jackson  at 2008-03-06 22:09 
+

xinit 1.0.8
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.8 (GNU/Linux)

iEYEABECAAYFAkfQa6kACgkQW4otUKDs0NMnBACfUVkwJDhDklo8GWGQaA96BRuw
kBUAoOsdGJZ+qeZExtkcGeoCPUCz87WI
=5S5y
-END PGP SIGNATURE-

Changes since xinit-1.0.7:
Adam Jackson (1):
  xinit 1.0.8

David Nusinow (1):
  Unbreak installs on non-launchd systems

James Cloos (1):
  Add missing PHONY line for automatic ChangeLog generation

Jeremy Huddleston (19):
  Added some support for Xquartz on OS-X.
  Added Apple launchd support
  Changed x11-exec to actually start X11.app.  X11.app will be responsible 
for calling xinit.
  OS-X: Added argv[0] hack for finding Xquartz UI and icon as well as 
claiming its dock icon
  Added support for OS-X preferences to disable tcp/ip connections and xauth
  OS-X: Made defaults test more robust
  OS-X: Need to use bash --login to setup the environment from launchd.
  XQuartz doesn't need the -launchd command line argument anymore.
  OS-X: Properly set enable_xauth if the user has no defaults set and 
choose a valid $display for fast-user-switching.
  OS-X: Add bindir to $PATH in startx if it's not there
  OS-X: Fixed typo
  OS-X: Set fontpath in xinitrc to include system / user fonts.  
Additionally fixed font scaling issues (trac #52)
  Apple: use -nocpp arg to xrdb if cpp is not installed
  Apple: Cleaned up font path setting and added font caching to xinitrc
  Apple: Support spaces in $HOME for font path, and remove duplicate entry
  Added org.x.X11.plist.cpp to EXTRA_DIST
  Apple: font caching and defaults
  Apple: Adding support for an xinitrc.d directory on OSX, so fink doesn't 
need to clobber files
  Apple: Use -c in the launchd plist, so broken .profile/.bashrc don't much 
up startx

Matthieu Herrb (2):
  Use /dev/arandom instead of /dev/urandom to generate the cookie
  Merge branch 'master' of 
ssh://he...@git.freedesktop.org/git/xorg/app/xinit

root (1):
  Define APPLE for the rest of us

---
 .gitignore  |2 
 Makefile.am |   58 
 configure.ac|   38 +-
 cpprules.in |   37 ++
 org.x.X11.plist.cpp |   27 +++
 startx.cpp  |  188 ++--
 xinit.c |   98 +--
 xinitrc.cpp |   28 +++
 8 files changed, 348 insertions(+), 128 deletions(-)
---

xinit: Changes to 'refs/tags/xinit-1.0.6'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.0.6' created by Matthieu Herrb  at 
2007-09-15 16:52 +

xinit version 1.0.6

Changes since xinit-1.0.5:
Matthieu Herrb (4):
  remove .serverauth.$$ file on signals or errors
  MKCOOKIE program for OpenBSD.
  generate
  Bump to 1.0.6

---
 INSTALL  |  236 +++
 configure.ac |   10 ++
 startx.cpp   |1 
 3 files changed, 245 insertions(+), 2 deletions(-)
---

xinit: Changes to 'refs/tags/xinit-1.0.5'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.0.5' created by Eric Anholt  at 2007-09-05 17:15 
+

xinit 1.0.5

Changes since xinit-1.0.4:
Eric Anholt (3):
  Use /dev/random to generate the cookie if mcookie is unavailable.
  Fix broken test for /dev/random cookie generation failure.
  Bump version to 1.0.5.

---
 configure.ac |2 +-
 startx.cpp   |   11 ---
 2 files changed, 9 insertions(+), 4 deletions(-)
---

xinit: Changes to 'refs/tags/xinit-1.0.3'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.0.3' created by Adam Jackson  at 
2006-10-13 21:53 +

xinit 1.0.3

Changes since the dawn of time:
Adam Jackson (6):
  Use a unique token for PKG_CHECK_MODULES. Otherwise, if you use a global
  Bug #3860: Avoid a bashism. (Diego Pettenò)
  Bug #2027: Treat SIGTERM like SIGINT in xinit. (Andreas Luik)
  Stub COPYING files
  Bump to 1.0.2.
  Bump to 1.0.3

Alan Coopersmith (9):
  x11perf/Makefile.am: xinit/Makefile.am: xvidtune/Makefile.am:
  Use kbd_mode -a to restore console keyboard on Solaris x86 too.
  Add config.h includes for modularization Use RETSIGTYPE if defined by
  Use AC_TYPE_SIGNAL and AC_FUNC_VFORK to replace Imake's SIGNAL_DEFINES and
  Don't define HAS_COOKIE_MAKER if mcookie wasn't found.
  Use cpp to substitute variables in man pages
  Use @APP_MAN_SUFFIX@ instead of $(APP_MAN_SUFFIX) in macro substitutions 
to
  Add settings for SHELL_CMD & ARCHMANDEFS to match monolith changes for bug
  Change *mandir targets to use new *_MAN_DIR variables set by 
xorg-macros.m4

Daniel Stone (3):
  Move manpages to section 1.
  Define HAS_COOKIE_MAKER and search for mcookie so startx will generate
  Bump to 0.99.1.

Egbert Eich (7):
  Importing vendor version xf86-012804-2330 on Thu Jan 29 00:06:33 PST 2004
  Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004
  readding XFree86's cvs IDs
  Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004
  Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004
  Merging XORG-CURRENT into trunk
  Separate server auth and client .Xautority file in startx. .Xautority 
might

Eric Anholt (4):
  Set CSRG_BASED for BSD systems so the build succeeds.
  Bugzilla #4045: Do a missed replacement of @@ with \ in startx.
  Add/improve .cvsignore files for apps.
  Another pass at .cvsignores for apps.

Jeremy C. Reed (2):
  Bug #4449  Be more
  In comments, change contractions to be spelled out to fix cpp "missing

Kaleb Keithley (4):
  R6.6 is the Xorg base-line
  Initial revision
  XFree86 4.3.0.1
  XFree86 4.3.99.16 Bring the tree up to date for the Cygwin folks

Kean Johnson (1):
  See ChangeLog entry 2005-11-07 for details.

Kevin E Martin (10):
  Various changes preparing packages for RC0:
  Update package version number for RC1 release.
  Update package version number for X11R7 RC2 release.
  Make using full paths in the xinit scripts optional.
  Make the programs used in the xinit scripts configurable.
  Update package version number for X11R7 RC3 release.
  Add m4 magic to allow AS_HELP_STRING to work with older versions of
  Change *man_SOURCES ==> *man_PRE to fix autotools warnings.
  Update package version number for final X11R7 release candidate.
  Update package version for X11R7 release.

Matthieu Herrb (2):
  Quote MCOOKIE to allow to specify a command with args (ie
  Check setuid() return value. Bugzilla #7116.

Søren Sandmann Pedersen (1):
  Build system for xinit

xinit: Changes to 'refs/tags/xinit-1.1.1'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.1.1' created by Jeremy Huddleston  at 
2008-12-17 23:20 +

xinit 1.1.1

Changes since xinit-1.1.0:
Alan Coopersmith (1):
  Fix build of startx & xinitrc with Solaris make

Jeremy Huddleston (17):
  Apple: privleged_startx: Increase the timeout so slower machines don't 
get a stray process warning in their system log.
  startx.cpp: Made some things a little more friendly for people who have 
spaces in pathnames.
  Apple: Using eval to protect people who have spaces in their home path.
  Support the instant-off API in SnowLeopard.
  Apple: sleep() to avoid innocent error message spew
  Apple: Make VPATH builds work on darwin
  Apple: Use AvailabilityMacros.h for Tiger compatability
  OSX: Create privleged_startx on Tiger
  OSX Tiger: More compilation fixes...
  OSX Tiger: Hopefully the last fix for Tiger users...
  Apple: Honor X11_PREFS_DOMAIN if it's set (1.4.2-apple26 and later)
  OSX Tiger: Fix discovery of mach port
  OSX: Fixed bad prefix
  OSX: More prefix fixes
  OSX: Don't use login/bash -c hack anymore for org.x.startx LaunchAgent
  Apple: Allow defaults option that maps to a -dpi server command line in 
startx
  xinit 1.1.1

---
 Makefile.am |3 
 configure.ac|   18 +--
 org.x.startx.plist.cpp  |5 -
 privileged_startx/20-font_cache.cpp |4 
 privileged_startx/Makefile.am   |9 +
 privileged_startx/client.c  |6 +
 privileged_startx/org.x.privileged_startx.plist.cpp |   19 ++--
 privileged_startx/server.c  |   68 --
 startx.cpp  |   95 +++-
 xinit.c |   40 +++-
 10 files changed, 191 insertions(+), 76 deletions(-)
---

xinit: Changes to 'refs/tags/xinit-1.0.9'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.0.9' created by Adam Jackson  at 2008-05-21 18:36 
+

xinit 1.0.9
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEABECAAYFAkg0a8QACgkQW4otUKDs0NNwiQCfaziYIkl3/EGgOlxXGPHPMnDM
ykIAnRBEwvNqdfU30Za4kni792UBnHm8
=Xynt
-END PGP SIGNATURE-

Changes since xinit-1.0.8:
Adam Jackson (2):
  Unset session environment variables so startx works within a running 
session.
  xinit 1.0.9

Alan Coopersmith (3):
  Use od on /dev/random to generate cookie on Solaris
  Check for proper cookie creation on all platforms
  Use /bin/ksh instead of /bin/sh on Solaris

Jeremy C. Reed (1):
  Use /dev/urandom for cookie it it exists

Jeremy Huddleston (14):
  Apple: Fixed issue where display would not be passed correctly to the 
server if nolisten tcp was enabled.
  Apple: Execute /usr/X11/bin/privileged_startx if it's present
  Apple: Renamed LaunchAgent to org.x.startx to distinguish it from the 
org.x.X11 application
  Correctly handle users with spaces in $HOME
  Apple: privileged_startx is in XINITDIR
  Apple: We renamed font_cache.sh to font_cache for better consistency... 
Changing startx to work with this
  Apple: Wait for privileged_startx to finish, so we don't race to create 
/tmp/.X11-unix
  Apple: Added privileged_startx
  Apple: Fixed make dist to include a missing header and not include 
generated sources
  Cleaned up handling of defaultserver{,args}
  Apple: Use CFProcessPath instead of argv[0] trick.
  Apple: Added some OSX version protection, so this will still compile on 
Tiger and below.
  Apple: No need for these bits being here in xinit as of 
xserver-1.4.0-apple9
  Apple: Don't need to spew unneccessary 'directory exists' messages.

Matthieu Herrb (2):
  OpenBSD: use openssl rand -hex 16 to generate the cookie.
  Replace sprintf() and strcpy() with snprintf().

---
 Makefile.am |   12 
 configure.ac|   38 +--
 org.x.X11.plist.cpp |   27 --
 org.x.startx.plist.cpp  |   25 ++
 privileged_startx/10-tmpdirs.cpp|   37 ++
 privileged_startx/20-font_cache.cpp |   35 ++
 privileged_startx/Makefile.am   |   74 +
 privileged_startx/client.c  |   56 
 privileged_startx/org.x.privileged_startx.plist.cpp |   21 +
 privileged_startx/privileged_startx.c   |   59 
 privileged_startx/privileged_startx.defs|   40 +++
 privileged_startx/privileged_startx_types.h |6 
 privileged_startx/server.c  |  250 
 startx.cpp  |   29 +-
 xinit.c |   89 +--
 xinitrc.cpp |   12 
 16 files changed, 682 insertions(+), 128 deletions(-)
---

xinit: Changes to 'refs/tags/xinit-1.0.7'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.0.7' created by Tilman Sauerbeck  at 
2007-09-17 10:47 +

xinit 1.0.7

Changes since xinit-1.0.6:
Tilman Sauerbeck (2):
  Bug #12448: Don't try to trap 'ERR'.
  Bumped version to 1.0.7.

---
 configure.ac |2 +-
 startx.cpp   |2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
---

xinit: Changes to 'refs/tags/xinit-1.2.0'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.2.0' created by Rémi Cardona  at 2009-11-14 14:00 
+

xinit 1.2.0
-BEGIN PGP SIGNATURE-
Version: GnuPG v2.0.13 (GNU/Linux)

iEYEABECAAYFAkr+t/sACgkQfUU/I5AasIqjEgCfZ6zMXvFykw8Erytf7Y6txWVV
hYUAnjmryZk3keU8Hura1tXFMC7PFZDr
=ABSC
-END PGP SIGNATURE-

Changes since xinit-1.1.1:
Alan Coopersmith (7):
  Migrate to xorg macros 1.3 & XORG_DEFAULT_OPTIONS
  Purge ancient server names from help, add newer server names instead
  Drop ancient A/UX compatibility hack
  Drop ancient SunWindows compatibility check
  Man page updates
  Strip RCS/CVS tags
  Use platform-specific X server names in man pages for cygwin & darwin

Andres Salomon (1):
  app/xinit: make startx's $? a useful value

Jeremy Huddleston (6):
  Apple: Use MAC_OS_X_VERSION_MIN_REQUIRED instead of 
__MAC_OS_X_VERSION_MIN_REQUIRED
  launchd: Added --with-launchd-id-prefix option to set non-standard 
launchd id prefix (org.x is still default)
  launchd: Include LAUNCHD_ID_PREFIX in the socket name for reverse lookup 
to tell which launchd id owns $DISPLAY
  launchd: Update the DISPLAY envvar to not have a - ... call me paranoid, 
but I feel safer without it
  This is not a GNU project, so declare it foreign.
  Apple: Export X11_PREFS_DOMAIN for children (quartz-wm)

Jon TURNEY (1):
  Cygwin can also have spaces in $HOME

Paulo Cesar Pereira de Andrade (1):
  Correct make distcheck for recent git versions.

Robert Macomber (1):
  startx: fix misparsing of initial client and server arguments which begin 
with / or ./

Rémi Cardona (2):
  make XINITDIR configurable at build-time, default is unchanged
  xinit 1.2.0

---
 .gitignore  |3 
 Makefile.am |   15 ++-
 configure.ac|   52 +
 cpprules.in |8 +-
 org.x.startx.plist.cpp  |4 -
 privileged_startx/Makefile.am   |7 +
 privileged_startx/client.c  |4 -
 privileged_startx/org.x.privileged_startx.plist.cpp |4 -
 privileged_startx/privileged_startx_types.h |6 +
 privileged_startx/server.c  |6 +
 startx.cmd  |3 
 startx.cpp  |   16 ++--
 startx.man  |   44 +--
 xinit.c |   58 +++---
 xinit.man   |   79 +---
 xinitrc.cmd |1 
 xinitrc.cpp |1 
 17 files changed, 160 insertions(+), 151 deletions(-)
---

xinit: Changes to 'refs/tags/xinit-1.1.0'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.1.0' created by Adam Jackson  at 2008-06-12 19:27 
+

xinit 1.1.0
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEABECAAYFAkhReJkACgkQW4otUKDs0NOHIQCfQHfyZVy+HhTugq4K5CHtF2pe
0M0AoLB3Z5SPeo8ABYpjg6WHu527165K
=UUDX
-END PGP SIGNATURE-

Changes since xinit-1.0.9:
Adam Jackson (1):
  xinit 1.1.0

Jeremy Huddleston (2):
  Properly handle using xserverrc
  Apple: Don't use launchd on Tiger since it doesn't support the features 
we need.

---
 Makefile.am  |4 
 configure.ac |   19 ---
 startx.cpp   |   20 ++--
 3 files changed, 18 insertions(+), 25 deletions(-)
---

xinit: Changes to 'refs/tags/xinit-1.2.1'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.2.1' created by Jeremy Huddleston  at 
2010-03-16 00:07 +

xinit 1.2.1
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.10 (Darwin)

iD8DBQBLnsvcjC1Anjf1NmMRAqKQAJ410505A9Uc4QPEXYcZvT8/cKW8DQCeK3j0
fpWy1o6+PkEIw/cV+3XoYzE=
=aRE5
-END PGP SIGNATURE-

Changes since xinit-1.2.0:
Gaetan Nadon (5):
  .gitignore: use common defaults with custom section # 24239
  Makefile.am: do not include autogen.sh in distribution #24183
  Deploy the new XORG_DEFAULT_OPTIONS #24242
  INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206
  Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES

Jeremy Huddleston (4):
  Quiet warning for fts_open
  darwin: Handle home directories that contain a single-quote (')
  Updates for .gitignore
  Update to version 1.2.1 for release.

---
 .gitignore   |   80 --
 INSTALL  |  236 ---
 Makefile.am  |   10 +
 configure.ac |7 -
 privileged_startx/.gitignore |9 +
 privileged_startx/server.c   |2 
 startx.cpp   |2 
 7 files changed, 89 insertions(+), 257 deletions(-)
---

xinit_1.3.4-2_amd64.changes ACCEPTED into unstable

2015-10-18 Thread Debian FTP Masters 


Accepted:

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256

Format: 1.8
Date: Mon, 19 Oct 2015 03:13:52 +0200
Source: xinit
Binary: xinit
Architecture: source amd64
Version: 1.3.4-2
Distribution: unstable
Urgency: medium
Maintainer: Debian X Strike Force 
Changed-By: Laurent Bigonville 
Description:
 xinit  - X server initialisation tool
Closes: 790433 801529
Changes:
 xinit (1.3.4-2) unstable; urgency=medium
 .
   * Team upload.
   * Remove xsfbs and switch to dh7
   * Make /etc/X11/xinit/xinitrc executable on upgrade too (Closes: #790433)
   * debian/control: Bump Standards-Version to 3.9.6 (no further changes)
   * d/p/07_Pass-keeptty-on-current-tty.patch: Pass -keeptty when telling the
 server to start on the current tty (Closes: #801529)
Checksums-Sha1:
 cdc15608ee75dfccb46d056461ccfeb7643431c6 1561 xinit_1.3.4-2.dsc
 2a16c4e615b70bd75fd6aa0ff8bef2e538172ef0 12195 xinit_1.3.4-2.diff.gz
 01d04cf01a7211710f3fa5264fff07dc32eb3f13 47414 xinit_1.3.4-2_amd64.deb
Checksums-Sha256:
 98b7248dad91929ee992fb2546437384227516e5573e3ff87402c86ae2066bd9 1561 
xinit_1.3.4-2.dsc
 e2a480c2b0b078fdfa31bd3421ec2fcc040a6dd64e4ee707469e67dfa3afc8b1 12195 
xinit_1.3.4-2.diff.gz
 8ab3e9433b89fcb6b4cbe1d9bf4890d4865edc267a3ea237113286ef3e81a266 47414 
xinit_1.3.4-2_amd64.deb
Files:
 76e43051c8debe9492111a82fc08e256 1561 x11 optional xinit_1.3.4-2.dsc
 f747d5487686505bc0ea07687a2cb3df 12195 x11 optional xinit_1.3.4-2.diff.gz
 faf50ec4266de938a134723e51844808 47414 x11 optional xinit_1.3.4-2_amd64.deb

-BEGIN PGP SIGNATURE-
Version: GnuPG v1

iQEcBAEBCAAGBQJWJESiAAoJEB/FiR66sEPVRcgH/AyhtL7mWap3gDATf74nKrci
uI4rLEWFvGBLPjCoI4jW4j4lJltPVNpAlIKVBKT1+5hz8gqRtzyYbOWUWwKIS9eN
6sVOaUuFrHP6ZdDdACK7E069TWPUUDcpcZr4yOEEDnnZzOwWevtVZJCiTomcYTaU
DhfHDXD6mpCL6WSlIn/GRtxOkzKsL8zYMqY6CuKOjBofFFYJTW4+OpeIReh7rZ10
6C2OxlYTL1Bz9jd2PjutOCpW/iTmK0RLB65Ceq35NCpV2MIngqLwdztdu53WBT4J
lDMHP9wx+92UBusKI8Zw2xPLXJi6ZfAdtTsUfV41R7tHVflVRs9DMYCxuvmi7FY=
=n/lQ
-END PGP SIGNATURE-


Thank you for your contribution to Debian.

xinit: Changes to 'refs/tags/xinit-1.3.4-2'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.3.4-2' created by Laurent Bigonville  at 
2015-10-19 01:19 +

xinit Debian release 1.3.4-2

Changes since xinit-1.3.4-1:
Laurent Bigonville (6):
  Make /etc/X11/xinit/xinitrc on upgrade too (Closes: #790433)
  Fix changelog
  debian/control: Bump Standards-Version to 3.9.6 (no further changes)
  d/p/07_Pass-keeptty-on-current-tty.patch: Pass -keeptty when telling the 
server to start on the current tty (Closes: #801529)
  Remove xsfbs and switch to dh7
  Release to unstable

---
 debian/changelog|   11 
 debian/compat   |2 
 debian/control  |5 
 debian/patches/07_Pass-keeptty-on-current-tty.patch |   32 +
 debian/patches/series   |1 
 debian/rules|   97 ---
 debian/xinit.install|2 
 debian/xinit.postinst   |   31 
 debian/xsfbs/repack.sh  |   32 -
 debian/xsfbs/xsfbs.mk   |  285 -
 debian/xsfbs/xsfbs.sh   |  622 
 11 files changed, 91 insertions(+), 1029 deletions(-)
---

xinit: Changes to 'refs/tags/debian/1.3.4-2'

2015-10-18 Thread Laurent Bigonville 
Rebased ref, commits from common ancestor:

xinit: Changes to 'debian-unstable'

2015-10-18 Thread Laurent Bigonville 
 debian/changelog  |   10 +
 debian/patches/08_pick-free-display.patch |   31 ++
 debian/patches/series |1 
 debian/rules  |1 
 4 files changed, 43 insertions(+)

New commits:
commit dbfd254d37e5a71b780cbdaba43cd91b96023780
Author: Laurent Bigonville 
Date:   Mon Oct 19 03:54:42 2015 +0200

Release to unstable

diff --git a/debian/changelog b/debian/changelog
index 8ec79e6..68ad392 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,11 +1,12 @@
-xinit (1.3.4-3) UNRELEASED; urgency=medium
+xinit (1.3.4-3) unstable; urgency=medium
 
+  * Team upload.
   * d/p/08_pick-free-display.patch: Properly pick a free display number if
 -nolock or -displayfd is used to start X (like GDM is now doing)
   * debian/rules: Make /etc/X11/xinit/xserverrc executable again, this got
 lost during the xsfbs -> dh7 switch
 
- -- Laurent Bigonville   Mon, 19 Oct 2015 03:49:19 +0200
+ -- Laurent Bigonville   Mon, 19 Oct 2015 03:54:32 +0200
 
 xinit (1.3.4-2) unstable; urgency=medium
 

commit a7e33612117b46a103498b8d59a00a37a512497c
Author: Laurent Bigonville 
Date:   Mon Oct 19 03:50:01 2015 +0200

debian/rules: Make /etc/X11/xinit/xserverrc executable again, this got lost 
during the xsfbs -> dh7 switch

diff --git a/debian/changelog b/debian/changelog
index 2e65547..8ec79e6 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -2,8 +2,10 @@ xinit (1.3.4-3) UNRELEASED; urgency=medium
 
   * d/p/08_pick-free-display.patch: Properly pick a free display number if
 -nolock or -displayfd is used to start X (like GDM is now doing)
+  * debian/rules: Make /etc/X11/xinit/xserverrc executable again, this got
+lost during the xsfbs -> dh7 switch
 
- -- Laurent Bigonville   Mon, 19 Oct 2015 03:44:48 +0200
+ -- Laurent Bigonville   Mon, 19 Oct 2015 03:49:19 +0200
 
 xinit (1.3.4-2) unstable; urgency=medium
 
diff --git a/debian/rules b/debian/rules
index 00cae49..35955b2 100755
--- a/debian/rules
+++ b/debian/rules
@@ -20,3 +20,4 @@ override_dh_install:
 override_dh_fixperms:
dh_fixperms
chmod 0755 debian/xinit/etc/X11/xinit/xinitrc
+   chmod 0755 debian/xinit/etc/X11/xinit/xserverrc

commit f5ead13a42ef2147c355a4faf0ddde8c56f7d60c
Author: Laurent Bigonville 
Date:   Mon Oct 19 03:45:54 2015 +0200

d/p/08_pick-free-display.patch: Properly pick a free display number if 
-nolock or -displayfd is used to start X (like GDM is now doing)

diff --git a/debian/changelog b/debian/changelog
index ea67453..2e65547 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,10 @@
+xinit (1.3.4-3) UNRELEASED; urgency=medium
+
+  * d/p/08_pick-free-display.patch: Properly pick a free display number if
+-nolock or -displayfd is used to start X (like GDM is now doing)
+
+ -- Laurent Bigonville   Mon, 19 Oct 2015 03:44:48 +0200
+
 xinit (1.3.4-2) unstable; urgency=medium
 
   * Team upload.
diff --git a/debian/patches/08_pick-free-display.patch 
b/debian/patches/08_pick-free-display.patch
new file mode 100644
index 000..74f9304
--- /dev/null
+++ b/debian/patches/08_pick-free-display.patch
@@ -0,0 +1,31 @@
+commit e07fa99039c0f63ed8f0b142e546ef102321fca0
+Author: Hans de Goede 
+Date:   Fri Mar 20 14:25:44 2015 +0100
+
+startx: Fix startx picking an already used display number when -nolock is 
used
+
+Currently startx relies on /tmp/.X?-lock being present for automatically
+picking a free display number. This does not work if -nolock is used when
+starting the server, or if the server is started with -displayfd as 
-displayfd
+implies -nolock.
+
+This is becoming a problem now that -displayfd is getting used by
+display-managers (e.g. gdm), this fixes this by also checking for
+/tmp/.X11-unix/X?
+
+Signed-off-by: Hans de Goede 
+Reviewed-by: Peter Hutterer 
+
+diff --git a/startx.cpp b/startx.cpp
+index cc8be90..a9d477b 100644
+--- a/startx.cpp
 b/startx.cpp
+@@ -120,7 +120,7 @@ enable_xauth=1
+ XCOMM Automatically determine an unused $DISPLAY
+ d=0
+ while true ; do
+-[ -e /tmp/.X$d-lock ] || break
++[ -e "/tmp/.X$d-lock" -o -S "/tmp/.X11-unix/X$d" ] || break
+ d=$(($d + 1))
+ done
+ defaultdisplay=":$d"
diff --git a/debian/patches/series b/debian/patches/series
index 0865b75..a7c5d38 100644
--- a/debian/patches/series
+++ b/debian/patches/series
@@ -3,3 +3,4 @@
 03_debian_startx_manpage.diff
 06_move_serverauthfile_into_tmp.diff
 07_Pass-keeptty-on-current-tty.patch
+08_pick-free-display.patch

xinit: Changes to 'refs/tags/xinit-1.3.4-3'

2015-10-18 Thread Laurent Bigonville 
Tag 'xinit-1.3.4-3' created by Laurent Bigonville  at 
2015-10-19 01:54 +

xinit Debian release 1.3.4-3

Changes since xinit-1.3.4-2:
Laurent Bigonville (3):
  d/p/08_pick-free-display.patch: Properly pick a free display number if 
-nolock or -displayfd is used to start X (like GDM is now doing)
  debian/rules: Make /etc/X11/xinit/xserverrc executable again, this got 
lost during the xsfbs -> dh7 switch
  Release to unstable

---
 debian/changelog  |   10 +
 debian/patches/08_pick-free-display.patch |   31 ++
 debian/patches/series |1 
 debian/rules  |1 
 4 files changed, 43 insertions(+)
---

Processing of xinit_1.3.4-3_amd64.changes

2015-10-18 Thread Debian FTP Masters 
xinit_1.3.4-3_amd64.changes uploaded successfully to localhost
along with the files:
  xinit_1.3.4-3.dsc
  xinit_1.3.4-3.diff.gz
  xinit_1.3.4-3_amd64.deb

Greetings,

Your Debian queue daemon (running on host franck.debian.org)

xinit_1.3.4-3_amd64.changes ACCEPTED into unstable

2015-10-18 Thread Debian FTP Masters 


Accepted:

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256

Format: 1.8
Date: Mon, 19 Oct 2015 03:54:32 +0200
Source: xinit
Binary: xinit
Architecture: source amd64
Version: 1.3.4-3
Distribution: unstable
Urgency: medium
Maintainer: Debian X Strike Force 
Changed-By: Laurent Bigonville 
Description:
 xinit  - X server initialisation tool
Changes:
 xinit (1.3.4-3) unstable; urgency=medium
 .
   * Team upload.
   * d/p/08_pick-free-display.patch: Properly pick a free display number if
 -nolock or -displayfd is used to start X (like GDM is now doing)
   * debian/rules: Make /etc/X11/xinit/xserverrc executable again, this got
 lost during the xsfbs -> dh7 switch
Checksums-Sha1:
 4fdfeda550798c6d3f889361f8cca11aea31ee58 1561 xinit_1.3.4-3.dsc
 82dcbefb3546168b298ff4e6f9ec076a909d51d1 12751 xinit_1.3.4-3.diff.gz
 4350faaf5fdf55bdbb4b0a32cb0220f98f4d2245 47540 xinit_1.3.4-3_amd64.deb
Checksums-Sha256:
 389444e4c5b1f606d516b0538d6e96ab71e470e01cda289b54e673fc9c656ccc 1561 
xinit_1.3.4-3.dsc
 0b081792e83043c3b87b3fca89d6c427ffb5baa19f9f42fa725d57ecefc2aa3b 12751 
xinit_1.3.4-3.diff.gz
 2746d79f70ba0bc51c9cd309a37bbf7bcaa5089ab9f6b9fac11d81fb42cfbebd 47540 
xinit_1.3.4-3_amd64.deb
Files:
 c27ede389db41f45a4b3854bde6dbc63 1561 x11 optional xinit_1.3.4-3.dsc
 4ae3b9cb7317be3d719a4b1962bcc22b 12751 x11 optional xinit_1.3.4-3.diff.gz
 d2abcc558fcb4e021651159c33b3805f 47540 x11 optional xinit_1.3.4-3_amd64.deb

-BEGIN PGP SIGNATURE-
Version: GnuPG v1

iQEcBAEBCAAGBQJWJE4XAAoJEB/FiR66sEPVZG4H/2+tpf27iXVkVuKewtMIXUfa
4/+FIsIprlXYF2ENpxq8qnRdHW6+i1GI75Le1V6XvumVT1PFjetM58sKL5cw8PfV
PqPJtULCENCSC+FmMYEJ3zCJFAj0WA+Ey3lIBe8Pcl9BNH96BvpSnbUGsezQKFWC
uzCh9eQCgGVC/GcgwjDAU9e+ZGD8w8RjjiZqMq69S4v6k3638bWT3TvIsGqO3/J+
AOVw2djT1S53tSZHGthFqPJ7oP0rGDP7fxiD+o4x+eBHgT0bP3zMBC4qxsjycpXb
4s2GhZ9CLBxD5lPN730xSTOZkGDaY4QIOu0zr82ltESTcX1RHggQx03yeviy+Ss=
=1XDH
-END PGP SIGNATURE-


Thank you for your contribution to Debian.

Bug#801487: introducing xserver-xorg-legacy without telling anybody?

2015-10-18 Thread Michel Dänzer 
On 18.10.2015 16:40, Harald Dunkel wrote:
> On 10/17/15 23:26, Julien Cristau wrote:
>> On Sat, Oct 17, 2015 at 05:34:19 +0200, Harald Dunkel wrote:
> 
>>> Since when?
>>>
>> Ever since X has been able to work as non-root, i.e. when logind support was 
>> added...
> 
> 
> Sorry to say, but thats BS. I am running X on sid right now without
> being root. No logind installed.

You'll find that the Xorg process runs as root then. What Julien is
talking about is the ability of the Xorg process to run as a non-root user.


-- 
Earthling Michel Dänzer   |   http://www.amd.com
Libre software enthusiast | Mesa and X developer



signature.asc
Description: OpenPGP digital signature