Re: can not connect video device(/dev/video0)
Dear linuxer: What may cause [EMAIL PROTECTED] root]# /proc/sys/dev/parport/parport0/autoprobe bash: /proc/sys/dev/parport/parport0/autoprobe: Permission denied I am root, pretty strange about it, please help sincere Eric _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
[newbie] webcam driver compile fail, please help
Dear linux users: I had nw802 file assume as my BTC usb webcam's linux driver http://nw802.sourceforge.net/faq.html , but when I compile(make-with my kernel source 2.4.20 installed) it have some error - [EMAIL PROTECTED] nw802-2.4-0.0.99]# make gcc -O3 -D__KERNEL__ -DMODULE -Wall -DMODVERSIONS -funroll-loops -frerun-cse-after-loop -funroll-all-loops -fomit-frame-pointer -nostdinc -I /usr/src/linux-2.4/include -I `dirname \`gcc -print-libgcc-file-name\``/include/ -include /usr/src/linux-2.4/include/linux/modversions.h -c -o usbvideo.o usbvideo.c usbvideo.c: In function `usbvideo_AllocateDevice': usbvideo.c:1083: warning: assignment from incompatible pointer type usbvideo.c: In function `usbvideo_v4l_mmap': usbvideo.c:1182: warning: passing arg 1 of `remap_page_range_Rc414bdc2' makes pointer from integer without a cast usbvideo.c:1182: incompatible type for argument 4 of `remap_page_range_Rc414bdc2' usbvideo.c:1182: too few arguments to function `remap_page_range_Rc414bdc2' make: *** [usbvideo.o] Error 1 -- hope to see any advancered's help, thanks in advance, sincerely eric _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com --- Begin Message --- > For Intel cpu's, you're on your own. IMO, there hasn't been a > decent chipset for Intel processors since the good ol' 440BX. 09/07/03 Thanks Anne for the motherboard text file, and to the others who have already replied and to those about to reply. Tom, My ASUS P2B is using the Intel 440BX AGPset. Do I get a prize? Time for more research on this subject. The Other. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com --- End Message ---
can not connect video device(/dev/video0)
Dear mandrake linux users: I had download and install most of my device driver of my webcam BTC usb webcam, but when I run xawtv or camoram or webcam, it response me error can not connect to video device(/dev/video0) please check connection please help on this, highly appreciate your effort and time sincere ERic _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
where is apt-get update's source?
Dear linux users: for atp-get sources, in my progeny 1.0, it seem in /var/state/apt/lists all sources are from progeny site, but all not be found at this time, how do I adding debian's sources? also I have a sid disk 1 how do I update, or upgrade from my installed progeny 1.0? highly appreciate your tech help and time sincere Eric -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
apt-get update, upgrade and install not success, please help
Dear debain users: When i use apt-get update; apt-get upgrade I meet the error You might want to rYou might want to run `apt-get -f install' to correct these. Sorry, but the following packages have unmet dependencies: libgtk1.2: Depends: gconv-modules but it is not installable locales: Depends: glibc2.2 but it is not installable E: Unmet dependencies. Try using -f. un `apt-get -f install' to correct these. then I use apt-get update; apt-get upgrade -f I meet following problem: Hit http://http.us.debian.org testing/non-free Packages Hit http://http.us.debian.org testing/non-free Release Reading Package Lists... Done Building Dependency Tree... Done Reading Package Lists... Done Building Dependency Tree... Done Correcting dependencies... Done The following packages will be REMOVED: libart-dev locales The following NEW packages will be installed: docbook-xml libdb3 libgtk1.2-common libscrollkeeper0 libxslt1 scrollkeeper symlinks The following packages have been kept back abiword apache apache-common apmd apt ash autoinstall balsa base-config bzip2 communicator console-data console-tools console-tools-libs cvs debhelper debian-policy dh-make dia discover dnsutils dpkg elm-me+ eog eperl eterm fileutils freetype2 gabber gedit gftp glade-gnome glimmer gmc gnome-applets gnome-control-center gnome-core gnome-help gnome-panel gnome-panel-data gnome-session gnome-utils gnomeicu gnucash gnumeric gnupg gnus groff gs gsfonts imagemagick libaudiofile-dev libbz2 libcapplet-dev libcapplet0 libdps-dev libglib1.2 libglib1.2-dev libmagick5 libnspr4 libpam-modules libpanel-applet-dev libpanel-applet0 librep9 libwww-perl lprng mc-common mozilla netpbm netscape ntp openssl parted perl-5.005-doc psgml python-dev python-doc python-gdk-imlib python-glade python-gnome python-gtk python-numeric rep rep-gtk rep-gtk-gnome samba samba-common sawfish-gnome shellutils slrn smbclient sox squid ssh swig sysklogd tetex-bin textutils util-linux vflib2 vim-gtk vm w3-el-e20 wget xchat-gnome xemacs21 xemacs21-bin xemacs21-mule xemacs21-support xemacs21-supportel xlibmesa-dev xlibosmesa-dev xpdf xscreensaver xserver-8514 xserver-agx xserver-common xserver-common-v3 xserver-mach32 xserver-mach8 xserver-p9000 xserver-s3 xserver-svga xserver-xfree86 321 packages upgraded, 7 newly installed, 2 to remove and 124 not upgraded. 24 packages not fully installed or removed. Need to get 0B/175MB of archives. After unpacking 99.7MB will be used. Do you want to continue? [Y/n] Calling dpkg with the following arguments... /usr/bin/dpkg --unpack /var/cache/apt/archives/debconf_1.2.14_all.deb /var/cache/apt/archives/libdb2-dev_2%3a2.7.7.0-8_i386.deb /var/cache/apt/archives/libdb2-util_2%3a2.7.7.0-8_i386.deb /var/cache/apt/archives/libdb2_2%3a2.7.7.0-8_i386.deb /var/cache/apt/archives/libpopt0_1.6.4-2_i386.deb /var/cache/apt/archives/mount_2.11n-4_i386.deb Sub-process /usr/bin/dpkg requires resequencing. highly appreciate your tech help and time sincere Eric -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: apt-get update, upgrade and install not success, please help
Dear Bruce or any linux users: my sources.list is test part of debian package so I just apt-get update progeny:~# apt-get update Hit http://http.us.debian.org testing/main Packages Hit http://http.us.debian.org testing/main Release Hit http://http.us.debian.org testing/contrib Packages Hit http://http.us.debian.org testing/contrib Release Hit http://http.us.debian.org testing/non-free Packages Hit http://http.us.debian.org testing/non-free Release Reading Package Lists... Done Building Dependency Tree... Done It seem ok. then I apt-get upgrade progeny:~# apt-get upgrade Reading Package Lists... Done Building Dependency Tree... Done You might want to run `apt-get -f install' to correct these. Sorry, but the following packages have unmet dependencies: libgtk1.2: Depends: gconv-modules but it is not installable locales: Depends: glibc2.2 but it is not installable E: Unmet dependencies. Try using -f. welcom any hint , appreciate your time to help sincere Eric Bruce Park wrote: > Eric, > > Are your sources in your /etc/apt/sources.list valid? > Just run the update command and see what happens first. Then run upgrade > afterwards. > > bp > > >From: eric lin <[EMAIL PROTECTED]> > >To: [EMAIL PROTECTED] > >Subject: apt-get update, upgrade and install not success, please help > >Date: Tue, 03 Dec 2002 03:43:40 -0700 > > > >Dear debain users: > > > > When i use apt-get update; apt-get upgrade > >I meet the error > > > >You might want to rYou might want to run `apt-get -f install' to correct > >these. > >Sorry, but the following packages have unmet dependencies: > > libgtk1.2: Depends: gconv-modules but it is not installable > > locales: Depends: glibc2.2 but it is not installable > >E: Unmet dependencies. Try using -f. > >un `apt-get -f install' to correct these. > > > >then I use > >apt-get update; apt-get upgrade -f > > > >I meet following problem: > > > > > >Hit http://http.us.debian.org testing/non-free Packages > >Hit http://http.us.debian.org testing/non-free Release > >Reading Package Lists... Done > >Building Dependency Tree... Done > >Reading Package Lists... Done > >Building Dependency Tree... Done > >Correcting dependencies... Done > >The following packages will be REMOVED: > > libart-dev locales > >The following NEW packages will be installed: > > docbook-xml libdb3 libgtk1.2-common libscrollkeeper0 libxslt1 > >scrollkeeper symlinks > >The following packages have been kept back > > abiword apache apache-common apmd apt ash autoinstall balsa > >base-config bzip2 communicator console-data > > console-tools console-tools-libs cvs debhelper debian-policy dh-make > >dia discover dnsutils dpkg elm-me+ eog > > eperl eterm fileutils freetype2 gabber gedit gftp glade-gnome glimmer > >gmc gnome-applets > > gnome-control-center gnome-core gnome-help gnome-panel > >gnome-panel-data gnome-session gnome-utils gnomeicu > > gnucash gnumeric gnupg gnus groff gs gsfonts imagemagick > >libaudiofile-dev libbz2 libcapplet-dev libcapplet0 > > libdps-dev libglib1.2 libglib1.2-dev libmagick5 libnspr4 > >libpam-modules libpanel-applet-dev > > libpanel-applet0 librep9 libwww-perl lprng mc-common mozilla netpbm > >netscape ntp openssl parted > > perl-5.005-doc psgml python-dev python-doc python-gdk-imlib > >python-glade python-gnome python-gtk > > python-numeric rep rep-gtk rep-gtk-gnome samba samba-common > >sawfish-gnome shellutils slrn smbclient sox > > squid ssh swig sysklogd tetex-bin textutils util-linux vflib2 vim-gtk > >vm w3-el-e20 wget xchat-gnome > > xemacs21 xemacs21-bin xemacs21-mule xemacs21-support > >xemacs21-supportel xlibmesa-dev xlibosmesa-dev xpdf > > xscreensaver xserver-8514 xserver-agx xserver-common xserver-common-v3 > >xserver-mach32 xserver-mach8 > > xserver-p9000 xserver-s3 xserver-svga xserver-xfree86 > >321 packages upgraded, 7 newly installed, 2 to remove and 124 not > >upgraded. > >24 packages not fully installed or removed. > >Need to get 0B/175MB of archives. After unpacking 99.7MB will be used. > >Do you want to continue? [Y/n] > >Calling dpkg with the following arguments... > >/usr/bin/dpkg --unpack /var/cache/apt/archives/debconf_1.2.14_all.deb > >/var/cache/apt/archives/libdb2-dev_2%3a2.7.7.0-8_i386.deb > >/var/cache/apt/archives/libdb2-util_2%3a2.7.7.0-8_i386.deb > >/var/cache/apt/archives/libdb2_2%3a2.7.7.0-8_i386.deb > >/var/cache/apt/archives/libpopt0_1.6.4-2_i386.deb > >/var/cache/apt/archives/mount_2.11n-4_i386.deb > >Sub-process /usr/bin/d
apt-get update then apt-get upgrade, remaining a lots package notinstall
Dear advance linux user: under choice of source as test, I type apt-get update progeny:/home/fsshl# apt-get update Hit http://http.us.debian.org testing/main Packages Hit http://http.us.debian.org testing/main Release Hit http://http.us.debian.org testing/contrib Packages Hit http://http.us.debian.org testing/contrib Release Hit http://http.us.debian.org testing/non-free Packages Hit http://http.us.debian.org testing/non-free Release Reading Package Lists... Done Building Dependency Tree... Done progeny:/home/fsshl# apt-get upgrade Reading Package Lists... Done Building Dependency Tree... Done The following packages have been kept back abiword apache apache-common apmd apt ash autoinstall balsa base-config bzip2 communicator console-data console-tools console-tools-libs cvs debhelper debian-policy dh-make dia discover dnsutils dpkg elm-me+ eog eperl eterm fileutils freetype2 gabber gedit gftp glade-gnome glimmer gmc gnome-applets gnome-control-center gnome-core gnome-help gnome-panel gnome-panel-data gnome-session gnome-utils gnomeicu gnucash gnumeric gnupg gnus groff gs gsfonts imagemagick libaudiofile-dev libbz2 libcapplet-dev libcapplet0 libdps-dev libglib1.2 libglib1.2-dev libmagick5 libnspr4 libpam-modules libpanel-applet-dev libpanel-applet0 librep9 libwww-perl lprng mc-common mozilla netpbm netscape ntp openssl parted perl-5.005-doc psgml python-dev python-doc python-gdk-imlib python-glade python-gnome python-gtk python-numeric rep rep-gtk rep-gtk-gnome samba samba-common sawfish-gnome shellutils slrn smbclient sox squid ssh swig sysklogd tetex-bin textutils util-linux vflib2 vim-gtk vm w3-el-e20 wget xchat-gnome xemacs21 xemacs21-bin xemacs21-mule xemacs21-support xemacs21-supportel xlibmesa-dev xlibosmesa-dev xpdf xscreensaver xserver-8514 xserver-agx xserver-common xserver-common-v3 xserver-mach32 xserver-mach8 xserver-p9000 xserver-s3 xserver-svga xserver-xfree86 0 packages upgraded, 0 newly installed, 0 to remove and 124 not upgraded. progeny:/home/fsshl# then apt-get upgrade, but the result is unoptismistic, it remaining have a lots of packages can not be install although no error like to see any tech hints or opinion highly appreciate your time and effort and help sincere Eric -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
when i access my own site it was reponse the connection was refused
Dear Linux users: I know at last update, it ever ask me what is my fully qualify domain name, then i type myregistereddomain.com result is proxy server and apache server seem can not start(which work before update or upgrade) now when i use my browser to access www.myregistereddomain.com it pop up a dialog window say The connection was refused when attempting to contact 12.34.56.78(which is my ip address) highly appreciate your help and effort Sincere Eric, in 2.4.20 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
apt-get install linuxconf, error while processing slrn
Dear Linuxer: I try to apt-get linuxconf, it encounter error end as Errors wre encountered while processing: slrn please help on that also I already have lprng install but when i try to print a file lpr try Get_local_host: hostname 'progeny.linuxspice.com' bad also my apache webserver seem not work by similar reason, when I try to access my own website, www.registereddomained.com, it rpsonse conenction refused when attempting to contact 12.34.56.78 also my motherboard(intel D845PESV) have built in Lan(eepro I guess) but I modprobe eepro /lib/modules/2.4.20-686/kernel/drivers/net/eepro.o: init_module: Device or resource busy Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20-686/kernel/drivers/net/eepro.o: insmod /lib/modules/2.4.20-686/kernel/drivers/net/eepro.o failed /lib/modules/2.4.20-686/kernel/drivers/net/eepro.o: insmod eepro failed how to let it work?(work with 3com card now I use, so I will connect the other to my xp pc to webserve it to broadcast from xp, in windowXP intel's onboard Lan have no problem connect to internet) highly apprecaite your help and effort and time sincere Eric -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
print fail , please help
Dear Linux users: although I seem have lprng running, but when I try lpr fsshl@www:~$ lpr try Status Information: sending job 'fsshl@www+995' to missingprinter@localhost connecting to 'localhost', attempt 1 connected to 'localhost' requesting printer missingprinter@localhost job 'fsshl@www+995' transfer to missingprinter@localhost failed error 'NONZERO RFC1179 ERROR CODE FROM SERVER' with ack 'ACK_FAIL' sending str '^Bmissingprinter' to missingprinter@localhost error msg: 'spool queue for 'missingprinter' does not exist on server www.linuxspice.com' error msg: ' non-existent printer or you need to run 'checkpc -f'' so I tried what it recommand checkpc -f fsshl@www:~$ checkpc -f bash: checkpc: command not found then I su as root retry fsshl@www:~$ su Password: www:/home/fsshl# checkpc -f www:/home/fsshl# lpr try Status Information: sending job 'root@www+0' to missingprinter@localhost connecting to 'localhost', attempt 1 connected to 'localhost' requesting printer missingprinter@localhost job 'root@www+0' transfer to missingprinter@localhost failed error 'NONZERO RFC1179 ERROR CODE FROM SERVER' with ack 'ACK_FAIL' sending str '^Bmissingprinter' to missingprinter@localhost error msg: 'spool queue for 'missingprinter' does not exist on server www.linuxspice.com' error msg: ' non-existent printer or you need to run 'checkpc -f'' same bad thing happen please help, highly apprecaite your time and effort sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
print fail , please help
Dear linux users: also in linuxconf, I try to configure printer again it response LPRng-Style printcap file found This module cann't manage this pritncap variant You may convert the file to the classic printcap format or delete it and let this module recreate a fresh-new printcap file. please help how to delete old one ? or any advance way to configure my printer sincerely Eric www.linuxspice.com linuxpc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
sound card on intel board not work, please help
Dear linux advancer: I had intel D845PESV , come with AC97 and eeproLAN, both all not work in 2.4.20 . like AC97, I put it in /etc/modules reboot it still have no sound(I assume gnome will have sound at login and logout as end user) please help on that, actually in windowXP I also have no osund, I remember XP install warn me AC97 is not compatible with windowXP, but I still let that software dirver install from XP cd. it had no sound though. hope to see any advancer in linux can let this chip work before windowr. also is Koda digital Camera using USB be supported? Highly apprecaite your reply and help and effort and time sincere Eric www.linuxspice.com linuxpc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: sound card on intel board not work, please help
Egor Tur wrote: I had intel D845PESV , come with AC97 and eeproLAN, both all not work in 2.4.20 . like AC97, I put it in /etc/modules reboot it still have no sound(I assume gnome will have sound at login and logout as end user) please help on that, actually in windowXP I also have no osund, I remember XP install warn me AC97 is not compatible with windowXP, but I still let that software dirver install from XP cd. it had no sound though. hope to see any advancer in linux can let this chip work before windowr. also is Koda digital Camera using USB be supported? Highly apprecaite your reply and help and effort and time I think that You need first of all setup support of AC'97 in BIOS. Best regards. Both my audio and Lan are enable on the Bios SV84510A.86A.0008.P04 come with that intel board no sound please help Sincere Eric www.linuxspice.com linux pc for sale
Re: sound card on intel board not work, please help
Edward Guldemond wrote: Eric, First of all, if you compiled 2.4.20, make sure that you built both of those drivers either directly into the kernel, or as modules. Judging by how you phrased your question, you're expecting them as modules, so go back and double check that. On Sun, Dec 08, 2002 at 11:18:13AM -0700, eric lin wrote: Dear linux advancer: I had intel D845PESV , come with AC97 and eeproLAN, both all not work in 2.4.20 . like AC97, I put it in /etc/modules What do you mean by "like AC97, I put it in /etc/modules"? What module did you load into /etc/modules? If it was just ac97_codec, then sound won't work as that sits on top of another driver. Because this is an Intel board, I would try the i810_audio module, and if that doesn't work, find out more about the name of the card and try ALSA. (Note, in order for ALSA to work under 2.4.20, you need to apply the patch from the bug page for it as the ALSA team expected a change in USB handling in 2.4.20 that didn't come.) As for the eepro NIC, make sure that you have it selected and build a module for it. I suggest putting this in /etc/modutils/aliases, thereby having the kernel module automaticlly load, but that's up to you. (It will work just fine in /etc/modules too.) please help on that, actually in windowXP I also have no osund, I remember XP install warn me AC97 is not compatible with windowXP, but I still let that software dirver install from XP cd. it had no sound though. My integrated sound (Intel 82801BA-ICH2) is AC97 based, and I had zero problems with it when the machine came preinstalled with Windows XP, and when I had to reinstall XP when it barfed all over itself. (This was a friend's computer at the time, and then I bought it from him.) hope to see any advancer in linux can let this chip work before windowr. Like I said, try i810_audio, and hopefully it will work. :-) Dear Edward or any advanced linuxer: in my 2.4.20-686 modprobe i810_audio not work www:/home/fsshl# modprobe i810_audio /lib/modules/2.4.20-686/kernel/drivers/sound/i810_audio.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.20-686/kernel/drivers/sound/i810_audio.o: insmod /lib/modules/2.4.20-686/kernel/drivers/sound/i810_audio.o failed /lib/modules/2.4.20-686/kernel/drivers/sound/i810_audio.o: insmod i810_audio failed please help on this sincere Eric www.linuxspice.com linux pc for sale also is Koda digital Camera using USB be supported? Highly apprecaite your reply and help and effort and time http://www.linux-usb.org/ is your friend for questions like this. Happy to help, -- Edward Guldemond (working on a witty sig)
on board ac97 sound not work in 2.4.20
after I login gnome as end user, it give me 2 error window I was not able to open your audio device OPlease check that you have permission to open /dev/mixer and make sure you have sound support compiled to your kernel so I me chmod 777 /dev/mixer, reboot login from gdm to gnome as enduser, no sound, that I had have in 2.4.17 in Asus Via chip of K7 1.4GHz (I am using Intel board onbard AC97) please help sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: on board ac97 sound not work in 2.4.20
Kent West wrote:
eric lin wrote:
after I login gnome as end user, it give me 2 error window
I was not able to open your audio device
OPlease check that you have permission to open /dev/mixer
and make sure you have sound support compiled to your kernel
so I me chmod 777 /dev/mixer, reboot
login from gdm to gnome as enduser, no sound, that I had have in
2.4.17 in Asus Via chip of K7 1.4GHz (I am using Intel board onbard
AC97)
please help
sincere Eric
www.linuxspice.com
linux pc for sale
I would recommend that you change the permissions on /dev/mixer back
to what they were, and instead add your user to the audio group
("addgroup eric audio"), then log out and back in. I'm confident that
this by itself is not sufficient to solve your problems.
What's the output of "lspci"?
And "lsmod"?
www:/home/fsshl# lsmod
Module Size Used byNot tainted
soundcore 3652 0 (autoclean)
af_packet 11784 2 (autoclean)
ppp_async 6368 1 (autoclean)
mousedev3768 1
input 3328 0 [mousedev]
ide-scsi7536 0
scsi_mod 88872 1 [ide-scsi]
parport_pc 21000 1 (autoclean)
lp 5920 0 (autoclean)
parport22912 1 (autoclean) [parport_pc lp]
ac973072 0 (unused)
bsd_comp4056 0
ppp_deflate 2968 0
zlib_deflate 17432 0 [ppp_deflate]
ppp_generic19392 3 [ppp_async bsd_comp ppp_deflate]
slhc4528 0 [ppp_generic]
3c59x 25264 1
rtc 5788 0 (autoclean)
ext2 31712 1 (autoclean)
ide-disk9920 2 (autoclean)
ide-probe-mod 8752 0 (autoclean)
ide-mod 151816 2 (autoclean) [ide-scsi ide-disk
ide-probe-mod]
ext3 58144 0 (autoclean)
jbd36744 0 (autoclean) [ext3]
unix 13768 132 (autoclean)
www:/home/fsshl# lspci
00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 02)
00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 02)
00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 02)
00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 02)
00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 02)
00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02)
00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24c5
(rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta] (rev 15)
02:05.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 24)
02:08.0 Ethernet controller: Intel Corp.: Unknown device 1039 (rev 82)
I go to tldp.org down laod sound howto, I did not see ac97 is supported chip
like to see your help or any other linuxer's advice
sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Returned mail: see transcript for details
Real Time Clock Driver v1.10e PCI: Found IRQ 9 for device 02:05.0 PCI: Sharing IRQ 9 with 00:1d.2 PCI: Sharing IRQ 9 with 00:1f.1 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 02:05.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xdc00. Vers LK1.1.16 eepro_init_module: Probe is very dangerous in ISA boards! eepro_init_module: Please add "autodetect=1" to force probe CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Intel 810 + AC97 Audio, version 0.21, 23:23:34 Nov 30 2002 PCI: Found IRQ 3 for device 00:1f.5 PCI: Sharing IRQ 3 with 00:1f.3 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xe080 and 0xe400, IRQ 3 i810_audio: Audio Controller supports 6 channels. i810_audio: Primary codec not ready. parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] parport0: Printer, Brother MFC-8500 lp0: using parport0 (polling). SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: E-IDE Model: CD-ROM 52X/AKH Rev: A64 Type: CD-ROM ANSI SCSI revision: 02 mice: PS/2 mouse device common for all mice ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! apm: BIOS not found. apm: BIOS not found. eepro_init_module: Probe is very dangerous in ISA boards! eepro_init_module: Please add "autodetect=1" to force probe hope to see some's help or advice sincere Eric www.linuxspice.com linux pc for sale
dmesg to help debug why ac97 no sound
Dear Linuxer: the following dmesg seem to show it detect my ac97 is i810_audio but it said Primary codec not ready please help on this in 2.4.20 intel borad /* eepro is also not work, both I all put in my /etc/modules */ sincere ERic www.linuxspice.com linux pc for sale eepro_init_module: Probe is very dangerous in ISA boards! eepro_init_module: Please add "autodetect=1" to force probe CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Intel 810 + AC97 Audio, version 0.21, 23:23:34 Nov 30 2002 PCI: Found IRQ 3 for device 00:1f.5 PCI: Sharing IRQ 3 with 00:1f.3 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xe080 and 0xe400, IRQ 3 i810_audio: Audio Controller supports 6 channels. i810_audio: Primary codec not ready. parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] parport0: Printer, Brother MFC-8500 lp0: using parport0 (polling). SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: E-IDE Model: CD-ROM 52X/AKHRev: A64 Type: CD-ROM ANSI SCSI revision: 02 mice: PS/2 mouse device common for all mice ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! apm: BIOS not found. apm: BIOS not found. eepro_init_module: Probe is very dangerous in ISA boards! eepro_init_module: Please add "autodetect=1" to force probe -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
i810_audio.o
Dear Hennig: I have similar problem as yours of sound in the motherboard to configure in linux would you mind to send me both oss and alsa's i810_audio.o highly appreciate your help sincere Eric www.linuxspice.com linux pc for sale /* any one in linux camp ever compile 2.5.50, especially in debian version, should I untar anywhere, then I make xconfig, it have many error, ./configure alsa driver also have gcc can not execute executable error, please help */ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
after upgrade, gnome not allowed login, and other
Dear linux: After upgrade, I can not login in gnome, It seem at upgrade process ever ask me install xfree4.2.1 I reply yes(next), but Kerob m, I reply cancel(No, I guess), is that cause problem also now I apt-get upgrade it left many package can no upgrade, please help on this www:/home/fsshl# apt-get dist-upgrade Reading Package Lists... Done Building Dependency Tree... Done Calculating Upgrade... Done The following packages have been kept back balsa debian-policy gabber glade-gnome gnome-applets gnome-control-center gnome-panel gnome-panel-data gnumeric libgd1 linuxconf netpbm parted python-gnome 0 packages upgraded, 0 newly installed, 0 to remove and 14 not upgraded. hope to get and advancer's help sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
from intel onboard Lan and audo to install 2.4.50
Colin Watson wrote: >On Mon, Dec 09, 2002 at 12:59:55AM -0700, eric lin wrote: > > >> the following dmesg seem to show it detect my ac97 is i810_audio but >>it said Primary codec not ready >> >>please help on this >>in 2.4.20 intel borad >>/* eepro is also not work, both I all put in my /etc/modules */ >> >>sincere ERic >>www.linuxspice.com >>linux pc for sale >> >>eepro_init_module: Probe is very dangerous in ISA boards! >>eepro_init_module: Please add "autodetect=1" to force probe >>CSLIP: code copyright 1989 Regents of the University of California >>PPP generic driver version 2.4.2 >>PPP Deflate Compression module registered >>PPP BSD Compression module registered >>Intel 810 + AC97 Audio, version 0.21, 23:23:34 Nov 30 2002 >>PCI: Found IRQ 3 for device 00:1f.5 >>PCI: Sharing IRQ 3 with 00:1f.3 >>PCI: Setting latency timer of device 00:1f.5 to 64 >>i810: Intel ICH4 found at IO 0xe080 and 0xe400, IRQ 3 >>i810_audio: Audio Controller supports 6 channels. >>i810_audio: Primary codec not ready. >> >> > >As far as I can tell, this happens if the i810 doesn't have the ac97 >codec. Assuming that it really is an i810 card [1], you might have >better luck getting a response from the linux-kernel mailing list. > >[1] You've explicitly put it in /etc/modules, so who knows! Note that I >don't have to explicitly add i810_audio to /etc/modules or >/etc/modutils/* for my laptop; instead the kernel works it out >automatically. > > > >>eepro_init_module: Probe is very dangerous in ISA boards! >>eepro_init_module: Please add "autodetect=1" to force probe >> >> > >The eepro module needs at least an io argument to set the I/O base >address(es), and possibly an irq argument too. You can use 'options' >lines in /etc/modutils/* to set options that are always added when >probing named modules; see the modules.conf(5) man page and remember to >run update-modules after editing files in /etc/modutils. > my lspci -v result related to intel onboard LAN(assume is eepro) >02:08.0 Ethernet controller: Intel Corp.: Unknown device 1039 (rev 82) >Subsystem: Intel Corp.: Unknown device 3015 >Flags: bus master, medium devsel, latency 32, IRQ 11 >Memory at feafe000 (32-bit, non-prefetchable) [size=4K] >I/O ports at d880 [size=64] >Capabilities: > >If it's a PCI card, you might want eepro100 instead? > > > I tried put a line in /etc/modutils/actions insmod eepro autodetect=1 IO=d880 IRQ=11 reboot , still not work (may be sytax is wrong, have any opinion? do see man page have its syntax on the option feature) some say newest kernel 2.5.50 can solve all above hardware(intel board on board LAN and audio ) problem, so I download full tar.gz, choose what my hardware fit make install error happen, I justify one of it, first one, in linux-2.4.50/include/asm-i386/io_apic.h containing sis_apic_bug not include its .h file then re do make install still error, this time I have no clue - in.o sound/built-in.o arch/i386/pci/built-in.o net/built-in.o --end-group -o vmlinux drivers/built-in.o(.text+0x11f15): In function `kd_nosound': : undefined reference to `input_event' drivers/built-in.o(.text+0x11f31): In function `kd_nosound': : undefined reference to `input_event' drivers/built-in.o(.text+0x11fc8): In function `kd_mksound': : undefined reference to `input_event' drivers/built-in.o(.text+0x12baa): In function `kbd_bh': : undefined reference to `input_event' drivers/built-in.o(.text+0x12bb8): In function `kbd_bh': : undefined reference to `input_event' drivers/built-in.o(.text+0x12bc9): more undefined references to `input_event' follow drivers/built-in.o(.text+0x13003): In function `kbd_connect': : undefined reference to `input_open_device' drivers/built-in.o(.text+0x1301f): In function `kbd_disconnect': : undefined reference to `input_close_device' drivers/built-in.o(.init.text+0xd71): In function `kbd_init': : undefined reference to `input_register_handler' make: *** [vmlinux] Error 1 fsshl@www:~/linux-2.5.50$ also I have difficult(unsuccess) patch 2.5.50 I did gzip -cd patch-2.5.50-ac1.gz | patch -p0 in my home direction which I untar unzip linux-2.5.50.tar.gz it ask file to patch I type patch-2.5.50-ac1.gz again, not right, so produc .orig and .rej files, please help on that highly appreciate your help and your time sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
how to unpatch?
Dear Linuxer: I follow the Readme in 2.5.50, do gzip -cd patch-2.5.50-ac1.gz | patch -p0 but then it response can't find file to patch at input line 4 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -- |diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.50/arch/alpha/defconfig linux.50-ac1/arch/alpha/defconfig |--- linux.50/arch/alpha/defconfig 2002-11-25 15:11:47.0 + |+++ linux.50-ac1/arch/alpha/defconfig 2002-12-03 20:54:30.0 + -- File to patch: then how should I response? I ever try to put again atch-2.5.50-ac1.gz but it is not work, please give more hint to unpatch highly appreciate your time and effort sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: how to unpatch?
Seneca wrote: On Tue, Dec 10, 2002 at 01:24:52AM -0700, eric lin wrote: I follow the Readme in 2.5.50, do gzip -cd patch-2.5.50-ac1.gz | patch -p0 but then it response can't find file to patch at input line 4 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -- |diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.50/arch/alpha/defconfig linux.50-ac1/arch/alpha/defconfig |--- linux.50/arch/alpha/defconfig 2002-11-25 15:11:47.0 + |+++ linux.50-ac1/arch/alpha/defconfig 2002-12-03 20:54:30.0 + -- File to patch: then how should I response? I ever try to put again atch-2.5.50-ac1.gz What is the name of the directory containing your kernel source? For the patch to work without typing in every filename, you could rename the source's directory to linux.50 I download as enduser for example to /home/fsshl linux-2.5.50.tar.gz then I tar xfvz linux-2.5.50.tar.gz it generate a directory linux-2.5.50 in my /home/fsshl then I follow README in linux-2.5.50 to do unpatch the another downloaded patch-2.5.50-ac1.gz from kernel.org www:/home/fsshl# gzip -cd patch-2.5.50-ac1.gz | patch -p1 can't find file to patch at input line 4 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -- |diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.50/arch/alpha/defconfig linux.50-ac1/arch/alpha/defconfig |--- linux.50/arch/alpha/defconfig 2002-11-25 15:11:47.0 + |+++ linux.50-ac1/arch/alpha/defconfig 2002-12-03 20:54:30.0 + -- File to patch: so the name of directory containing my kernel source should be /home/fsshl in the promt of File to patch: I tried both patch-2.5.50-ac1.gz and linux-2.5.50.tar.gz all not work the line gzip -cd patch-2.5.50-ac1.gz | patch -p1 in that readme doc should do gzip -cd patch-2.5.50-ac1.gz | patch -p0 but someone in [EMAIL PROTECTED] told me eric lin wrote: Dear Andrew: I follow the Readme in 2.5.50, do gzip -cd patch-2.5.50-ac1.gz | patch -p0 You want `patch -p1'. what ever both all not work. like to see any advancer's opinion highly apprecaite your help sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
need help on webserver or apache
Dear Linuxer: I also have a webserver and website question, I create a directory checkout in my /var/www which contain index.html itself but if I type in any browser http;//www.myregistereddomain.com/checkout it did not show the content in my /var/www/checkout/index.html please help -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Apache config
Dear Nate: I get that doamin is by paying some company to register, I only give them my ip address to get that domain. no, it only show a piece of white so should I configure more some where in my apache server, hihgly appreciate nate wrote: eric lin said: Dear Linuxer: I also have a webserver and website question, I create a directory checkout in my /var/www which contain index.html itself but if I type in any browser http;//www.myregistereddomain.com/checkout it did not show the content in my /var/www/checkout/index.html what does it show? have you tried http://YOUR_IP_ADDRESS/checkout ? does your domain properly point to the IP of the server? nate -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: need help on webserver or apache
but what exact command i should use or what file I should modify/ I search whole my disk only www:/# find . | grep mod_dir ./usr/share/doc/apache/manual/mod/mod_dir.html.en ./usr/share/doc/apache/manual/mod/mod_dir.html.html ./usr/share/doc/apache/manual/mod/mod_dir.html.ja.jis ./usr/lib/apache/1.3/110mod_dir.info ./usr/lib/apache/1.3/mod_dir.so www:/# cd /var/www www:/var/www# DirectoryIndex index.html /cgi-bin/index.pl bash: DirectoryIndex: command not found www:/var/www# /usr/lib/apache/1.3/mod_dir.so related also I have a source code line is http://www.linuxspice.com/cgi-bin/entrance.cgi"; > in my websource, should I create a directory cgi-bin and create a file name entrance.cgi in that dir in /var/www? highly apprecaite your help on this issue pasha wrote: Have you tried specifying a 'DirectoryIndex' directive? For info, go to: http://httpd.apache.org/docs/mod/mod_dir.html#directoryindex :P On Wed, Dec 11, 2002 at 03:12:32AM -0700, eric lin wrote: Dear Linuxer: I also have a webserver and website question, I create a directory checkout in my /var/www which contain index.html itself but if I type in any browser http;//www.myregistereddomain.com/checkout it did not show the content in my /var/www/checkout/index.html please help -- Sincere Eric www.linuxspice.com linux pc for sale -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
install macromedia coldfusion MX have problem
Dear Linuxer; I tried to install macromedia's coldfusion MX but I meet error Error occurred during initialization of VM Unable to load native library: /tmp/install.dir.24128/Linux/resource/jre/lib/i38 6/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so. 6 with link time reference Please help -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: install macromedia coldfusion MX have problem
that seem is a big defect, since what old can use , but new can not. Would any body have opinion so that. New should improve not retrograde eric nate wrote: eric lin said: Dear Linuxer; I tried to install macromedia's coldfusion MX 6/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file probably cannot use it on debian woody. it is linked against glibc 2.0 which is really old. I think debian hamm(1998) was the most recent version of debian to sport glibc 2.0 nate -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: need help on webserver or apache
pasha wrote: You should be modifying /etc/apache/httpd.conf (unless you have built the source by hand - then: find /etc -iname "httpd.conf") According to the documentation for apache 1.3 - you should be loading mod_dir module somewhere in your httpd.conf (usually it is already included, but could be commented out - in which case you should uncomment the line; otherwise, this is the line from my httpd.conf: LoadModule dir_module /usr/lib/apache/1.3/mod_dir.so then, somewhere in your httpd.conf you should also include the following lines: DirectoryIndex index.html index.htm index.shtml index.cgi This 'should do the trick'. although thanks your advice, but after I modify(adding that 3 lines) my /etc/apache/httpd.conf then reboot open mozilla 1.2.1-3 newest from debian upgrade of unstable, type in http://www.linuxspice.com/checkout it still a piece of white but if you click my wite's bottom's hyperlink checkout, it do can show the content I edit in my /var/www/checkout/index.html please help again or any linuxer's advice sincere Eric As far as your cgi's are concerned, debianized system would often keep its cgi scripts in /usr/lib/cgi-bin - but you should make sure that your httpd.conf has appropriate entries for cgi's: LoadModule cgi_module /usr/lib/apache/1.3/mod_cgi.so ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ AllowOverride None Options ExecCGI Order allow,deny Allow from all [these lines were taken from the default httpd.conf supplied with debian's apache package] Hope this helps... if you are having problems with cgi's in apache, you should read over the following: http://httpd.apache.org/docs/mod/mod_cgi.html :P On Wed, Dec 11, 2002 at 04:51:50AM -0700, eric lin wrote: but what exact command i should use or what file I should modify/ I search whole my disk only www:/# find . | grep mod_dir /usr/share/doc/apache/manual/mod/mod_dir.html.en /usr/share/doc/apache/manual/mod/mod_dir.html.html /usr/share/doc/apache/manual/mod/mod_dir.html.ja.jis /usr/lib/apache/1.3/110mod_dir.info /usr/lib/apache/1.3/mod_dir.so www:/# cd /var/www www:/var/www# DirectoryIndex index.html /cgi-bin/index.pl bash: DirectoryIndex: command not found www:/var/www# /usr/lib/apache/1.3/mod_dir.so related also I have a source code line is http://www.linuxspice.com/cgi-bin/entrance.cgi"; > in my websource, should I create a directory cgi-bin and create a file name entrance.cgi in that dir in /var/www? highly apprecaite your help on this issue pasha wrote: Have you tried specifying a 'DirectoryIndex' directive? For info, go to: http://httpd.apache.org/docs/mod/mod_dir.html#directoryindex :P On Wed, Dec 11, 2002 at 03:12:32AM -0700, eric lin wrote: Dear Linuxer: I also have a webserver and website question, I create a directory checkout in my /var/www which contain index.html itself but if I type in any browser http;//www.myregistereddomain.com/checkout it did not show the content in my /var/www/checkout/index.html please help -- Sincere Eric www.linuxspice.com linux pc for sale -- Sincere Eric www.linuxspice.com linux pc for sale -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: need help on webserver or apache
pasha wrote: You should be modifying /etc/apache/httpd.conf (unless you have built the source by hand - then: find /etc -iname "httpd.conf") According to the documentation for apache 1.3 - you should be loading mod_dir module somewhere in your httpd.conf (usually it is already included, but could be commented out - in which case you should uncomment the line; otherwise, this is the line from my httpd.conf: LoadModule dir_module /usr/lib/apache/1.3/mod_dir.so then, somewhere in your httpd.conf you should also include the following lines: DirectoryIndex index.html index.htm index.shtml index.cgi This 'should do the trick'. As far as your cgi's are concerned, debianized system would often keep its cgi scripts in /usr/lib/cgi-bin - but you should make sure that your httpd.conf has appropriate entries for cgi's: LoadModule cgi_module /usr/lib/apache/1.3/mod_cgi.so ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ AllowOverride None Options ExecCGI Order allow,deny Allow from all same thing , after i adding these line reboot, to my site fill out some info in my form, hit submit the browser show Method Not Allowed The requested method POST is not allowed for the URL /index.html. please help again, or any linuxer's advice [these lines were taken from the default httpd.conf supplied with debian's apache package] Hope this helps... if you are having problems with cgi's in apache, you should read over the following: http://httpd.apache.org/docs/mod/mod_cgi.html :P On Wed, Dec 11, 2002 at 04:51:50AM -0700, eric lin wrote: but what exact command i should use or what file I should modify/ I search whole my disk only www:/# find . | grep mod_dir /usr/share/doc/apache/manual/mod/mod_dir.html.en /usr/share/doc/apache/manual/mod/mod_dir.html.html /usr/share/doc/apache/manual/mod/mod_dir.html.ja.jis /usr/lib/apache/1.3/110mod_dir.info /usr/lib/apache/1.3/mod_dir.so www:/# cd /var/www www:/var/www# DirectoryIndex index.html /cgi-bin/index.pl bash: DirectoryIndex: command not found www:/var/www# /usr/lib/apache/1.3/mod_dir.so related also I have a source code line is http://www.linuxspice.com/cgi-bin/entrance.cgi"; > in my websource, should I create a directory cgi-bin and create a file name entrance.cgi in that dir in /var/www? highly apprecaite your help on this issue pasha wrote: Have you tried specifying a 'DirectoryIndex' directive? For info, go to: http://httpd.apache.org/docs/mod/mod_dir.html#directoryindex :P On Wed, Dec 11, 2002 at 03:12:32AM -0700, eric lin wrote: Dear Linuxer: I also have a webserver and website question, I create a directory checkout in my /var/www which contain index.html itself but if I type in any browser http;//www.myregistereddomain.com/checkout it did not show the content in my /var/www/checkout/index.html please help -- Sincere Eric www.linuxspice.com linux pc for sale -- Sincere Eric www.linuxspice.com linux pc for sale -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: from intel onboard Lan and audo to install 2.4.50
some say newest kernel 2.5.50 can solve all above hardware(intel board on board LAN and audio ) problem, so I download full tar.gz, choose what my hardware fit make install Use make-kpkg in the kernel-package package. I did, but it terminate with error gcc -Wp,-MD,drivers/pci/.quirks.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -Iarch/i386/mach-defaults -nostdinc -iwithprefix include-DKBUILD_BASENAME=quirks -DKBUILD_MODNAME=quirks -c -o drivers/pci/quirks.o drivers/pci/quirks.c drivers/pci/quirks.c: In function `quirk_ioapic_rmw': drivers/pci/quirks.c:354: `sis_apic_bug' undeclared (first use in this function) drivers/pci/quirks.c:354: (Each undeclared identifier is reported only once drivers/pci/quirks.c:354: for each function it appears in.) make[3]: *** [drivers/pci/quirks.o] Error 1 make[2]: *** [drivers/pci] Error 2 make[1]: *** [drivers] Error 2 make[1]: Leaving directory `/home/fsshl/linux-2.5.50' make: *** [stamp-build] Error 2 www:/home/fsshl/linux-2.5.50# if someone know it be modifed, please drop me a note where I can get the fixed source. it's on 2.5.50.ac-1 patched 2.5.50 from kernel.org hihgly apprecaite error happen, I justify one of it, first one, in linux-2.4.50/include/asm-i386/io_apic.h containing sis_apic_bug not include its .h file As Colin already said, if you can't handle this, you shouldn't be using 2.5 kernels. Some of them don't build, and many (most) have serious bugs that could cause data loss. If you want to go ahead with this, you'll have to get help from lkml, but be prepared to be thoroughly roasted. also I have difficult(unsuccess) patch 2.5.50 I did gzip -cd patch-2.5.50-ac1.gz | patch -p0 ^ s/0/1/ -rob -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: after upgrade, gnome not allowed login, and other
Rob Weir wrote: On Mon, Dec 09, 2002 at 07:29:49PM -0700, eric lin wrote: Dear linux: After upgrade, I can not login in gnome, Are you running sid? You might have the broken bonobo-activation package installed. If your mirror is out of date, go get the latest release from http.us.debian.org. my source is unstable so it is newest, I checked after tonoght's updae upgrade, so I reboot at login window choose gnome, it response two heavy flash then return to login window so not work, need advanced help again It seem at upgrade process ever ask me install xfree4.2.1 I reply yes(next), but Kerob m, I reply Kerob? www:/home/fsshl# apt-get dist-upgrade Reading Package Lists... Done Building Dependency Tree... Done Calculating Upgrade... Done The following packages have been kept back balsa debian-policy gabber glade-gnome gnome-applets gnome-control-center gnome-panel gnome-panel-data gnumeric libgd1 linuxconf netpbm parted python-gnome 0 packages upgraded, 0 newly installed, 0 to remove and 14 not upgraded. Are you running sid or sarge? In sid, packages sometimes get held back because their dependencies haven't all been uploaded, or approved by the ftpmasters or whatever. Also, don't use linuxconf. It's crap. And it can damage your system. my begining is progeny1.0 2.2.18 then load 4 or 5 deb of pppoeconf from first disk of sid, then download from unstable kernel image 2.4.20, and upgrade again to 2.4.20-2 -rob -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: need help on webserver or apache
pasha wrote: Check your apache's log to see what goes wrong... tail -f /var/log/apache/errors.log then restart your apache (using a different term window) and watch what goes in your errors.log. If you don't find anything useful during restart of apache - then see what happens when you access the directory with your mozilla. Also, make sure that the directory in question is registered in your httpd.conf ( directive)... make sure you have the modules, and apache knows about them... for example, you might need to add the following line to your httpd.conf: AddModule mod_dir.c and then restart your apache. After the modules have been loaded, you can simply comment out the above line from your httpd.conf file. The same applies to your cgi. :P I add these in the end of /etc/apache/httpd.conf it turn out my site can not be access altogether please feel free to modify, probably the order is not correct or other factor. It have 2 loadModule in the front part. sincere Eric AllowOverride None Option ExecCGI Order allow,deny Allow from all AllowOverride None Options ExecCGI Order allow,deny Allow from all AddModule mod_dir.c DirectoryIndex index.html index.htm index.shtml index.cgi ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ AllowOverride None Options ExecCGI Order allow,deny Allow from all On Wed, Dec 11, 2002 at 07:08:37AM -0700, eric lin wrote: pasha wrote: You should be modifying /etc/apache/httpd.conf (unless you have built the source by hand - then: find /etc -iname "httpd.conf") According to the documentation for apache 1.3 - you should be loading mod_dir module somewhere in your httpd.conf (usually it is already included, but could be commented out - in which case you should uncomment the line; otherwise, this is the line from my httpd.conf: LoadModule dir_module /usr/lib/apache/1.3/mod_dir.so then, somewhere in your httpd.conf you should also include the following lines: DirectoryIndex index.html index.htm index.shtml index.cgi This 'should do the trick'. although thanks your advice, but after I modify(adding that 3 lines) my /etc/apache/httpd.conf then reboot open mozilla 1.2.1-3 newest from debian upgrade of unstable, type in http://www.linuxspice.com/checkout it still a piece of white but if you click my wite's bottom's hyperlink checkout, it do can show the content I edit in my /var/www/checkout/index.html please help again or any linuxer's advice sincere Eric As far as your cgi's are concerned, debianized system would often keep its cgi scripts in /usr/lib/cgi-bin - but you should make sure that your httpd.conf has appropriate entries for cgi's: LoadModule cgi_module /usr/lib/apache/1.3/mod_cgi.so ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ AllowOverride None Options ExecCGI Order allow,deny Allow from all [these lines were taken from the default httpd.conf supplied with debian's apache package] Hope this helps... if you are having problems with cgi's in apache, you should read over the following: http://httpd.apache.org/docs/mod/mod_cgi.html :P On Wed, Dec 11, 2002 at 04:51:50AM -0700, eric lin wrote: but what exact command i should use or what file I should modify/ I search whole my disk only www:/# find . | grep mod_dir /usr/share/doc/apache/manual/mod/mod_dir.html.en /usr/share/doc/apache/manual/mod/mod_dir.html.html /usr/share/doc/apache/manual/mod/mod_dir.html.ja.jis /usr/lib/apache/1.3/110mod_dir.info /usr/lib/apache/1.3/mod_dir.so www:/# cd /var/www www:/var/www# DirectoryIndex index.html /cgi-bin/index.pl bash: DirectoryIndex: command not found www:/var/www# /usr/lib/apache/1.3/mod_dir.so related also I have a source code line is http://www.linuxspice.com/cgi-bin/entrance.cgi"; > in my websource, should I create a directory cgi-bin and create a file name entrance.cgi in that dir in /var/www? highly apprecaite your help on this issue pasha wrote: Have you tried specifying a 'DirectoryIndex' directive? For info, go to: http://httpd.apache.org/docs/mod/mod_dir.html#directoryindex :P On Wed, Dec 11, 2002 at 03:12:32AM -0700, eric lin wrote: Dear Linuxer: I also have a webserver and website question, I create a directory checkout in my /var/www which contain index.html itself but if I type in any browser http;//www.myregistereddomain.com/checkout it did not show the content in my /var/www/checkout/index.html please help -- Sincere Eric www.linuxspice.com linux pc for sale -- Sincere Eric www.linuxspice.com linux pc for sale -- Sincere Eric www.linuxspice.com linux pc for sale -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: need help on webserver or apache
pasha wrote: Check your apache's log to see what goes wrong... tail -f /var/log/apache/errors.log www:/home/fsshl# tail -f /var/log/apache/error.log [Wed Dec 11 04:21:17 2002] [error] [client 64.91.61.186] File does not exist: /v ar/www/favicon.ico [Wed Dec 11 06:21:54 2002] [error] [client 157.158.178.3] client sent HTTP/1.1 r equest without hostname (see RFC2616 section 14.23): / [Wed Dec 11 06:58:00 2002] [notice] caught SIGTERM, shutting down [Wed Dec 11 07:00:59 2002] [notice] Apache/1.3.26 (Unix) Debian GNU/Linux config ured -- resuming normal operations [Wed Dec 11 07:00:59 2002] [notice] suEXEC mechanism enabled (wrapper: /usr/lib/ apache/suexec) [Wed Dec 11 07:00:59 2002] [notice] Accept mutex: sysvsem (Default: sysvsem) [Wed Dec 11 08:32:00 2002] [notice] caught SIGTERM, shutting down [Wed Dec 11 08:57:13 2002] [notice] Apache/1.3.26 (Unix) Debian GNU/Linux config ured -- resuming normal operations [Wed Dec 11 08:57:13 2002] [notice] suEXEC mechanism enabled (wrapper: /usr/lib/ apache/suexec) [Wed Dec 11 08:57:13 2002] [notice] Accept mutex: sysvsem (Default: sysvsem) would some one can see what may cause wrong? highly appreciate then restart your apache (using a different term window) and watch what goes in your errors.log. If you don't find anything useful during restart of apache - then see what happens when you access the directory with your mozilla. Also, make sure that the directory in question is registered in your httpd.conf ( directive)... make sure you have the modules, and apache knows about them... for example, you might need to add the following line to your httpd.conf: AddModule mod_dir.c and then restart your apache. After the modules have been loaded, you can simply comment out the above line from your httpd.conf file. The same applies to your cgi. :P On Wed, Dec 11, 2002 at 07:08:37AM -0700, eric lin wrote: pasha wrote: You should be modifying /etc/apache/httpd.conf (unless you have built the source by hand - then: find /etc -iname "httpd.conf") According to the documentation for apache 1.3 - you should be loading mod_dir module somewhere in your httpd.conf (usually it is already included, but could be commented out - in which case you should uncomment the line; otherwise, this is the line from my httpd.conf: LoadModule dir_module /usr/lib/apache/1.3/mod_dir.so then, somewhere in your httpd.conf you should also include the following lines: DirectoryIndex index.html index.htm index.shtml index.cgi This 'should do the trick'. although thanks your advice, but after I modify(adding that 3 lines) my /etc/apache/httpd.conf then reboot open mozilla 1.2.1-3 newest from debian upgrade of unstable, type in http://www.linuxspice.com/checkout it still a piece of white but if you click my wite's bottom's hyperlink checkout, it do can show the content I edit in my /var/www/checkout/index.html please help again or any linuxer's advice sincere Eric As far as your cgi's are concerned, debianized system would often keep its cgi scripts in /usr/lib/cgi-bin - but you should make sure that your httpd.conf has appropriate entries for cgi's: LoadModule cgi_module /usr/lib/apache/1.3/mod_cgi.so ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ AllowOverride None Options ExecCGI Order allow,deny Allow from all [these lines were taken from the default httpd.conf supplied with debian's apache package] Hope this helps... if you are having problems with cgi's in apache, you should read over the following: http://httpd.apache.org/docs/mod/mod_cgi.html :P On Wed, Dec 11, 2002 at 04:51:50AM -0700, eric lin wrote: but what exact command i should use or what file I should modify/ I search whole my disk only www:/# find . | grep mod_dir /usr/share/doc/apache/manual/mod/mod_dir.html.en /usr/share/doc/apache/manual/mod/mod_dir.html.html /usr/share/doc/apache/manual/mod/mod_dir.html.ja.jis /usr/lib/apache/1.3/110mod_dir.info /usr/lib/apache/1.3/mod_dir.so www:/# cd /var/www www:/var/www# DirectoryIndex index.html /cgi-bin/index.pl bash: DirectoryIndex: command not found www:/var/www# /usr/lib/apache/1.3/mod_dir.so related also I have a source code line is http://www.linuxspice.com/cgi-bin/entrance.cgi"; > in my websource, should I create a directory cgi-bin and create a file name entrance.cgi in that dir in /var/www? highly apprecaite your help on this issue pasha wrote: Have you tried specifying a 'DirectoryIndex' directive? For info, go to: http://httpd.apache.org/docs/mod/mod_dir.html#directoryindex :P On Wed, Dec 11, 2002 at 03:12:32AM -0700, eric lin wrote: Dear Linuxer: I also have a webserver and website question, I create a directory checkout in my /var/www which contain index.html itself but if I type in any browser http;//www.myregistereddomain.com/checkout it did not show the content in my /var/www/checkout/index.html please help -- Sincere Eri
Re: need help on webserver or apache
pasha wrote: can you send me your entire httpd.conf file? It isn't necessarily the problem with these lines, but could also be affected by their location within the file, among with other things... So, to make things much easier, and quicker, to resolve - I'd like to take a loot at your entire httpd.conf file. On Wed, Dec 11, 2002 at 08:51:25AM -0700, eric lin wrote: pasha wrote: Check your apache's log to see what goes wrong... tail -f /var/log/apache/errors.log then restart your apache (using a different term window) and watch what goes in your errors.log. If you don't find anything useful during restart of apache - then see what happens when you access the directory with your mozilla. Also, make sure that the directory in question is registered in your httpd.conf ( directive)... make sure you have the modules, and apache knows about them... for example, you might need to add the following line to your httpd.conf: AddModule mod_dir.c and then restart your apache. After the modules have been loaded, you can simply comment out the above line from your httpd.conf file. The same applies to your cgi. :P I add these in the end of /etc/apache/httpd.conf it turn out my site can not be access altogether please feel free to modify, probably the order is not correct or other factor. It have 2 loadModule in the front part. sincere Eric AllowOverride None Option ExecCGI Order allow,deny Allow from all AllowOverride None Options ExecCGI Order allow,deny Allow from all AddModule mod_dir.c DirectoryIndex index.html index.htm index.shtml index.cgi ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ AllowOverride None Options ExecCGI Order allow,deny Allow from all # This is the main server configuration file. See URL http://www.apache.org/ # for instructions. # Do NOT simply read the instructions in here without understanding # what they do, if you are unsure consult the online docs. You have been # warned. # Originally by Rob McCool # Shared Object Module Loading: # To be able to use the functionality of a module which was built # as a shared object you have to place corresponding `LoadModule' # lines at this location so the directives contained in it are # actually available _before_ they are used. # Example: # ServerType is either inetd, or standalone. ServerType standalone -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: need help on webserver or apache
pasha wrote: can you send me your entire httpd.conf file? It isn't necessarily the problem with these lines, but could also be affected by their location within the file, among with other things... So, to make things much easier, and quicker, to resolve - I'd like to take a loot at your entire httpd.conf file. On Wed, Dec 11, 2002 at 08:51:25AM -0700, eric lin wrote: pasha wrote: Check your apache's log to see what goes wrong... tail -f /var/log/apache/errors.log then restart your apache (using a different term window) and watch what goes in your errors.log. If you don't find anything useful during restart of apache - then see what happens when you access the directory with your mozilla. Also, make sure that the directory in question is registered in your httpd.conf ( directive)... make sure you have the modules, and apache knows about them... for example, you might need to add the following line to your httpd.conf: AddModule mod_dir.c and then restart your apache. After the modules have been loaded, you can simply comment out the above line from your httpd.conf file. The same applies to your cgi. :P I add these in the end of /etc/apache/httpd.conf it turn out my site can not be access altogether please feel free to modify, probably the order is not correct or other factor. It have 2 loadModule in the front part. sincere Eric AllowOverride None Option ExecCGI Order allow,deny Allow from all AllowOverride None Options ExecCGI Order allow,deny Allow from all AddModule mod_dir.c DirectoryIndex index.html index.htm index.shtml index.cgi ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ AllowOverride None Options ExecCGI Order allow,deny Allow from all -- Sincere Eric www.linuxspice.com linux pc for sale # This is the main server configuration file. See URL http://www.apache.org/ # for instructions. # Do NOT simply read the instructions in here without understanding # what they do, if you are unsure consult the online docs. You have been # warned. # Originally by Rob McCool # Shared Object Module Loading: # To be able to use the functionality of a module which was built # as a shared object you have to place corresponding `LoadModule' # lines at this location so the directives contained in it are # actually available _before_ they are used. # Example: # ServerType is either inetd, or standalone. ServerType standalone # If you are running from inetd, go to "ServerAdmin". # Port: The port the standalone listens to. For ports < 1023, you will # need httpd to be run as root initially. Port 80 # HostnameLookups: Log the names of clients or just their IP numbers # e.g. www.apache.org (on) or 204.62.129.132 (off) # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on. HostnameLookups off # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # User/Group: The name (or #number) of the user/group to run httpd as. # On SCO (ODT 3) use User nouser and Group nogroup # On HPUX you may not be able to use shared memory as nobody, and the # suggested workaround is to create a user www and use that user. User www-data Group www-data # ServerAdmin: Your address, where problems with the server should be # e-mailed. ServerAdmin webmaster@localhost # ServerRoot: The directory the server's config, error, and log files # are kept in. # NOTE! If you intend to place this on a NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation, # you will save yourself a lot of trouble. ServerRoot /etc/apache # BindAddress: You can support virtual hosts with this option. This option # is used to tell the server which IP address to listen to. It can either # contain "*", an IP address, or a fully qualified Internet domain name. # See also the VirtualHost directive. BindAddress * # The Debian package of Apache loads every feature as shared modules. # Please keep this LoadModule: line here, it is needed for installation. # LoadModule vhost_alias_module /usr/lib/apache/1.3/mod_vhost_alias.so # LoadModule env_module /usr/lib/apache/1.3/mod_env.so LoadModule config_log_module /usr/lib/apache/1.3/mod_log_config.so # LoadModule mime_magic_module /usr/lib/apache/1.3/mod_mime_magic.so LoadModule mime_module /usr/lib/apache/1.3/mod_mime.so LoadModule negotiation_module /usr/lib/apache/1.3/mod_negotiation.so LoadModule status_module /usr/lib/apache/1.3/mod_status.so # LoadModule info_module /usr/lib/apache/1.3/mod_info.so # LoadModule includes_module /usr/lib/apache/1.3/mod_include.so LoadModule autoindex_module /usr/lib/apache/1.3/mod_autoindex.so LoadModule dir_module /usr/lib/apache/1.3/mod_dir.so LoadModule cgi_module /usr/lib/apache/1.3/mod_cgi.so # LoadModule asis_module /usr/lib/apache/1.3/mod_asis.so # LoadModule imap_module /usr/lib/apache/1.3/
Re: need help on webserver or apache
pasha wrote: I am afraid the following few lines of your file got sent, please re-send the file... I suspect that it could have been truncated along the way... You can archive it with tar.gz and attach it - email it directly to me at [EMAIL PROTECTED] - that should do it! :P # This is the main server configuration file. See URL http://www.apache.org/ # for instructions. # Do NOT simply read the instructions in here without understanding # what they do, if you are unsure consult the online docs. You have been # warned. # Originally by Rob McCool # Shared Object Module Loading: # To be able to use the functionality of a module which was built # as a shared object you have to place corresponding `LoadModule' # lines at this location so the directives contained in it are # actually available _before_ they are used. # Example: # ServerType is either inetd, or standalone. ServerType standalone I guess I realize, if I type http://www.linuxspice.com/checkout/index.html then it will show any way thanks your help -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Unidentified subject!
Dear debian linux user: My isp qwest.net assigned dsl modem actiontec R1524SU, accord tech support said it use port 80, he said If I am going to broadcast website, I need to configure webserver to use other port and config modem to forward that port, so I use port 70 Listen 70 in httpd.conf I tried http://(FQDN) or (public ip):70it reponse connection refused-if no appendix 70, then it show the modem 's configure page my apache test page still can be accessed by , http://localhost, http://127.0.0.1, or http://192.168.0.2(shown in my ifconfig) looking for any advanced advice sincere eric, _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
how to broadcast web, if dsl modem block port 80
Dear debian linux user: My isp qwest.net assigned dsl modem actiontec R1524SU, accord tech support said it use port 80, he said If I am going to broadcast website, I need to configure webserver to use other port and config modem to forward that port, so I use port 70 Listen 70 in httpd.conf I tried http://(FQDN) or (public ip):70it reponse connection refused-if no appendix 70, then it show the modem 's configure page my apache test page still can be accessed by , http://localhost, http://127.0.0.1, or http://192.168.0.2(shown in my ifconfig) looking for any advanced advice sincere eric, _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Apache/DSL Modem/Port Forwarding
--- Elizabeth Barham <[EMAIL PROTECTED]> wrote: >eric writes: > >> My isp qwest.net assigned dsl modem actiontec R1524SU, accord tech >> support said it use port 80, he said If I am going to broadcast website, >> I need to configure webserver to use other port and config modem to >> forward that port, so I use port 70 >> Listen 70 >> in httpd.conf >> I tried http://(FQDN) or (public ip):70it reponse connection refused-if >> no appendix 70, then it show the modem 's configure page >> >> my apache test page still can be accessed by , http://localhost, >> http://127.0.0.1, or http://192.168.0.2(shown in my ifconfig) > >Can you access your Apache test page when httpd.conf is set to "Listen >70" like this: > > http://127.0.0.1:70 yes, I can access my test page by this way > >?. If so, then you may be experiencing a problem related to your DSL >modem. > welcome any softer soln so I can save a little money to rent static ip. actiontec tech support told me port 80 be used by that dsl/router >Elizabeth _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: how to broadcast web, if dsl modem block port 80
thanks your reply I let httpd.conf all back to port 80, and lease a static ip from qwest.net(my isp) contact actiontec tech support, it ask me to change modem configuration at DMZ hosting to my local ip, 192.168.0.2 then I try my static ip again on the browzer, and it response time out he also recommand me to upgrade dsl modem 1524's firmware from my current 1.60.10.0.50 to 1.60.10.0.69 after I unzip the new firmware file, it generate [EMAIL PROTECTED] recover]# ls product.ini R1520SU.bin R1520SU.bmp R1524SU-1.bin R1524SU-1.bmp R1524SU.bin R1524SU.bmp recover.exe recover.ini ver.txt [EMAIL PROTECTED] recover]# cat ver.txt 1.60.10.0.69-R1520SU 1.60.10.0.69-R1524SU-1 1.60.10.0.69-R1524SU -- does anyone know how to make this dos configureation file work in linux? or succesful to use atciontec r1524 old firmware to broadcast web? like to see your experience sincere eric --- Wolfgang Fischer <[EMAIL PROTECTED]> wrote: >On Wed, 03 Sep 2003 06:00:11 +0200, eric lin wrote: > >> Dear debian linux user: >> >> My isp qwest.net assigned dsl modem actiontec R1524SU, accord tech >> support said it use port 80, he said If I am going to broadcast website, >> I need to configure webserver to use other port and config modem to >> forward that port, so I use port 70 >> Listen 70 >> in httpd.conf >> I tried http://(FQDN) or (public ip):70it reponse connection refused-if >> no appendix 70, then it show the modem 's configure page >> >> my apache test page still can be accessed by , http://localhost, >> http://127.0.0.1, or http://192.168.0.2(shown in my ifconfig) > >If this (and not http://localhost:70) is still possible, you have to >restart apache. Changes in httpd.conf are used after restarting apache. >> >> looking for any advanced advice >> sincere eric, >> >> _ >> Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com > > >-- >To UNSUBSCRIBE, email to [EMAIL PROTECTED] >with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Apache/DSL Modem/Port Forwarding
thanks your reply again, I went to portscan.com, check my httpd header, it response can not find, so I guess if I can not see my website powered by my own pc, it also can not be access by outsider. --- Elizabeth Barham <[EMAIL PROTECTED]> wrote: >eric writes: > >> > If so, then you may be experiencing a problem related to your DSL >> > modem. >> >> welcome any softer soln so I can save a little money to rent static >> ip. actiontec tech support told me port 80 be used by that >> dsl/router > >You mentioned Port Forwarding in your original email so if your DSL >modem is capable of doing that then it may work. > >Keep in mind, however, that the reverse action from your side of the >modem may not be what others see; it may be working but you can't see >it. After you set up port forwarding on your DSL modem then you may >want to ask a friend or someone with a different net IP address to try >and report what he or she sees. > >Elizabeth _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
run win/dos file on linux, please help
Dear advanced linux user: I had win/dos format hardware firmware update file, like it run on linux, I tried wine, but not success --- [EMAIL PROTECTED] root]# wine Actiontec-1524-1_60_10_0_69-Upgrade.exe wine: relocation error: /usr/lib/wine/libntdll.dll.so: symbol __fork, version GLIBC_2.0 not defined in file libc.so.6 with link time reference Highly apprecaite anyone's help on this eric, [EMAIL PROTECTED] _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: run win/dos file on linux, please help
--- message from Ryan Nowakowski <[EMAIL PROTECTED]> attached: thanks your reply, I do not have floppy drive, I ever download dosemu, then at command line type dos [EMAIL PROTECTED] root]# dos CPU speed set to 1161 MHz Running on CPU=586, FPU=1 In file included from /var/lib/dosemu/global.conf:743 from /var/lib/dosemu/global.conf:633 Error in /var/lib/dosemu/global.conf: (line 744) Disk-device/file /var/lib/dosemu/hdimage.first doesn't exist. 1 error(s) detected while parsing the configuration-file -- then I tried dos Actiontec-1524* (my firmware upgrade file, dsl modem actiontec R1524) still get same error result looking advancer share your dos/window emulator's experience Eric _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com --- Begin Message --- On Wed, Sep 03, 2003 at 04:15:24PM -0700, eric lin wrote: > Dear advanced linux user: > > I had win/dos format hardware firmware update file, like it run on linux, I tried > wine, but not success The easiest way to do this is to just use a dos or windows boot floppy. -- Ryan Nowakowski Computer Support for Small Business and Individuals http://austincomputersupport.com pgp0.pgp Description: PGP signature --- End Message ---
Re: Apache/DSL Modem/Port Forwarding
Thanks your reply, the following is this dsl modem's advance setup # WAN IP Address # Wireless Settings # LAN IP Address # DHCP Server # Services Blocking # Website Blocking # VPN Pass Through # Remote Management # Port Forwarding # DMZ Hosting # Firewall # Dynamic Routing # NAT # Static Routing # MAC Address Cloning I believe I modify back from my apache server's httpd.conf listen 70 back to 80, also no Port Forwaring my static ip is 209.180.184.93 you might try any way, I tried telnet (my ip) it have login prompt, but that seem very little to help me to my goal broadcast webpage. also I can not guess how to configure or modify the setting so the modem configure page can be moved out from port 80 that's why actiontec support ask me to update firmware, but it only have window file no linux tar file looking advancer sharing your opinion sincere Eric --- --- Jacob Anawalt <[EMAIL PROTECTED]> wrote: >eric lin wrote: > >>--- Elizabeth Barham <[EMAIL PROTECTED]> wrote: >> >> >>>eric writes: >>> >>> >>>> My isp qwest.net assigned dsl modem actiontec R1524SU, accord tech >>>>support said it use port 80, he said If I am going to broadcast website, >>>> I need to configure webserver to use other port and config modem to >>>>forward that port, so I use port 70 >>>>Listen 70 >>>>in httpd.conf >>>>I tried http://(FQDN) or (public ip):70it reponse connection refused-if >>>> no appendix 70, then it show the modem 's configure page >>>> >>>> my apache test page still can be accessed by , http://localhost, >>>>http://127.0.0.1, or http://192.168.0.2(shown in my ifconfig) >>>> >>>> >>>Can you access your Apache test page when httpd.conf is set to "Listen >>>70" like this: >>> >>>http://127.0.0.1:70 >>> >>> >> >>yes, I can access my test page by this way >> >> >> >>>?. If so, then you may be experiencing a problem related to your DSL >>>modem. >>> >>> >>> >> >>welcome any softer soln so I can save a little money to rent static ip. >>actiontec tech support told me port 80 be used by that dsl/router >> >> > > >eric lin wrote: > >>--- Elizabeth Barham <[EMAIL PROTECTED]> wrote: >> >> >>>eric writes: >>> >>> >>> >>>>>If so, then you may be experiencing a problem related to your DSL >>>>>modem. >>>>> >>>>> >>>>welcome any softer soln so I can save a little money to rent static >>>>ip. actiontec tech support told me port 80 be used by that >>>>dsl/router >>>> >>>> >>>You mentioned Port Forwarding in your original email so if your DSL >>>modem is capable of doing that then it may work. >>> >>>Keep in mind, however, that the reverse action from your side of the >>>modem may not be what others see; it may be working but you can't see >>>it. After you set up port forwarding on your DSL modem then you may >>>want to ask a friend or someone with a different net IP address to try >>>and report what he or she sees. >>> >>>Elizabeth >>> >>> >> >>thanks your reply again, >> >>I went to portscan.com, check my httpd header, it response can not find, so I guess >>if I can not see my website powered by my own pc, it also can not be access by >>outsider. >> >> >> >Let me see if I understand what you are saying. > >Qwest said here's your static IP, but btw we're using port 80 for >configuring the DSL modem, so you'll have to use another port for web >traffic. > >The DSL modem has the public ip address and your computer only has a >private network address (eg 192.168.0.2) and you can configure your DSL >modem to forward packets. > >You are able to browse to any of the following: http://127.0.0.1/, >http://127.0.0.1:70/, http://192.168.0.2/ and http://192.168.0.0:70/ > >You can browse the web and send email from this computer right? If so, >then routing is most likely set up correctly. > >Are you sure that you have entered the port 70 forward properly into the >dsl modem configuration? > >The DSL modem config page should indicate that it is forwarding tcp >traffic on port 70 to your web server on port 70 (you might be able to >forward
webbroadcast trouble, plese help
after I modify /etc/httpd/conf/httpd.conf file from listen 80 to 70 and modem advanced setting port forwarding form 60 to 90 for both 192.168.0.2 and 209.180.184.93(leased static ip from qwest.net) my test page can be access by http://localhost:70 but http://209.180.184.93:70 it immediately response connection refused so , it seem show my linux file do have some inflence to pass through this dsl and its firmware if not totally looking advancer sharing your physics of linux sincere Eric _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: [DYNDNS #54522] if port 80 be block by dsl modem, can I still broadcast web?
Dear Christian: In modem's configure menu's port forwarding, I make it pass 60 to 90 port at both tcp and udp and ip address 192.168.0.2(private, I can see it from my ifconfig) and 209.180.184.93(leased static ip from qwest.net) at advanced setting and in /etc/httpd/conf/httpd.conf , change listen 80 to listen 70 in my /etc/hosts I have, and only have loop back 127.0.0.1 localhost the result now is http://209.180.184.93 or www.linuxspc.dyndns.org show my modem config page http://209.180.184.93:70 or www.linuxspc.dyndns.org:70 connection refused when attempting to 209.180.184.93:70 http://localhost connection refused when sttempting to connect localhost http://localhost:70 immediated show my apache test page - under such phenonan , how do I make http://209.180.184.93 or www.linuxspc.dyndns.org immediate pop out my apache test page ? I used apache 2, linux kernel 2.4.20-6(redhat 9) looking your experienced advice sincere eric [EMAIL PROTECTED] --- Christian Smith via RT <[EMAIL PROTECTED]> wrote: > > [EMAIL PROTECTED] - Wed Sep 3 17:34:10 2003]: > > > Dear Christrian : > > > > my registered linuxspc.dyndns.org, but it showed > a > > username, password request window, that is not > what I > > setup in my webserver. > > > > please help > > This is probably the web admin interface to your > router. You need to > make sure that the router is configured to forward > port 80 to your web > server. Also, realize that you may not be able to > connect to your web > server via the linuxspc.dyndns.org name from within > your network > because the router may not (probably does not) > support loopback > connections. > > -- > Christian Smith > Customer Support Technician > Dynamic DNS Network Services > http://www.dyndns.org/ > __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Apache/DSL Modem/Port Forwarding
--- Jacob Anawalt <[EMAIL PROTECTED]> wrote: >eric lin wrote: > >[...snip...] > >>that's why actiontec support ask me to update firmware, but it only have window file >>no linux tar file >> >>looking advancer sharing your opinion >> >> >> >Is the update file a win32 executable (ie update.exe) or is it a zip >file who's contents need to be ftp'd/zmodem transfered to the DSL modem? > >If it's not a program, but is an archive file or just a data file that >needs to be transfered, you may not need windows. > >Jacob two file, one is .zip, I already unzip it in linux the other is .exe file that is the problem I can not get it run in linux > >Ps. I find it interesting that you are cross-posting to debian-user and >redhat-user lists. What distribution/release of GNU/Linux are you using? > I use redhat 9, kernel 2.4.20-6 > >-- >To UNSUBSCRIBE, email to [EMAIL PROTECTED] >with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: how to broadcast web, if dsl modem block port 80
one side connect to phone line, the other side connect to my pc's lan port, so it seem is modem but it print gateway on the device, so it is a complicated device(actiontec dsl-modem-gateway R1524). I ever phone actiontec tech support, he said this dsl modem with my current firmware 1.51 can work to broadcast webserver-do not need to update to newer firmware. But he do not know how to support linux. hope to see more help sincere eric --- "Stefan Waidele jun." <[EMAIL PROTECTED]> wrote: >eric lin wrote: >> Dear debian linux user: >> >> My isp qwest.net assigned dsl modem actiontec R1524SU, > >Is that a DSL-modem or a DSL-Router? > >The fact that it has a management-UI running on port 80 suggests it is a >router. > >If it is a router you will have to read up on port-forwarding. > >HTH, > >Stefan _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: how to broadcast web, if dsl modem block port 80
so I tried most exposed setting, dmz host, but first, it can not let me type in my public ip, it only allow 192.168.0.* second, I try 182.168.0.2 in that dmz host which show on my ifconfig, but the result still can not access my website's page when i type in my wrote: >Hi Eric, > >eric lin wrote: > > one side connect to phone line, the other side connect to my pc's lan > > port, so it seem is modem > > > > but it print gateway on the device, > > > > so it is a complicated device(actiontec dsl-modem-gateway R1524). > > > > >> If it is a router > >...or another kind of complicated device... > > >> you will have to read up on port-forwarding. > >http://www.hastec.nl/actiontec/tutorials/port/port_f.html >and >http://www.cloudnet.com/support/getting_Connected/setup/other/options.php > >were found on: >http://www.google.de/search?hl=de&ie=UTF-8&oe=UTF-8&q=port-forwarding+actiontec&meta= > >HTH, > >Stefan > > >-- >To UNSUBSCRIBE, email to [EMAIL PROTECTED] >with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: route function of actiontec 1524(solved)
--- "eric" <[EMAIL PROTECTED]> wrote: >Kevin Buhr wrote: > >>"eric" <[EMAIL PROTECTED]> writes: >> >> >>> I had actiontec 1524 dsl modem, firmware 1.60.50.0.51, with one pc >>>(wtih linux, redhat 9) with one static ip, I want to broadcast >>>webserver by above >>>but when I type in my (static ip) in my browser, it show the modem >>>configuration page, not my apache test page which I suppose to see. >>> >>> >> >>I don't have an Actiontec modem, but it looks like it's a combination >>DSL modem and NATting router. >> >>Working from their user manual, I gather that---under the "WAN IP >>Address" advanced setting page---you've set the modem up to either >>obtain its (static) IP address automatically or you've specified the >>static IP address manually. In particular, you don't have >>"transparent bridging" enabled, so your WAN IP address is your global >>static IP address and your RedHat machine is obtaining a 192.168.0.xxx >>IP address from the modem via DHCP, right? >> >>If this is correct, I'd suggest that you begin by entering the >>advanced configuration and double-check that "remote management" is >>disabled and that, on the "port forwarding" screen, you have an entry >>that will forward packets for TCP port 80 to the *internal* IP >>address, say 192.168.0.2, of your PC. >> >>Now, even with everything set up this way, it may *still* be the case >>that when you "http://my.static.ip/"; from within your internal >>network, you get the configuration pages for your modem (or you get >>nothing at all). In fact, this probably *is* what will happen; it's >>just a pecularity of how NAT works. The only way to get to your >>RedHat webserver from your internal network will be to do >>"http://192.168.0.2/";. >> >>The key is whether or not a buddy, connecting from the *outside* to >>"http://my.static.ip/"; gets your RedHat webserver or not. Yes, I see my apache test page from outside world, thanks Kevin and many other friend's help on this issue, it solved sincere eric, [EMAIL PROTECTED] >> >> _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
btc webcam and its app not work, please help
Dear Linux users: I had a btc webcam, I try using gnomemeeting(come with rh9 default), it fail on both audio and video, my onboard ac 97 sound it work fine when I test it in install rh9 process camorama, from video4linux.net and http://camorama.fixedgear.org/, it response Cound not connect to video connection(/dev/video0) please check connection, but I already insert my webcam cable to usb port. I also went to debian site to find webcam app, SDLcam-0.7.3, I get source from sunsite.unc.edu, it fail to install. -- [EMAIL PROTECTED] SDLcam-0.7.3]# ./install.sh cp: cannot stat `SDLcam': No such file or directory cp: cannot stat `filter/*.so': No such file or directory cp: cannot stat `capture/*.so': No such file or directory -- SDLcam has been installed in /usr/local/bin filters and input plugins are in /usr/local/lib/SDLcam Its ressources files are in /usr/local/share/SDLcam Please note that you can edit the SDLcam.cfg file and copy it in /usr/local/share/SDLcam for global use. --- please help on this eric _ Have you signed up for the World's Fastest Free Email ? http://www.Luxmail.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
error in make-kpkg at linux-2.5.51
gcc -Wp,-MD,drivers/ide/pci/.nvidia.o.d -D__KERNEL__ -Iinclude -Wall -Wstrict- prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -mpreferred -stack-boundary=2 -march=i686 -Iarch/i386/mach-generic -fomit-frame-pointer -nos tdinc -iwithprefix include -Idrivers/ide -DKBUILD_BASENAME=nvidia -DKBUILD_MOD NAME=nvidia -c -o drivers/ide/pci/nvidia.o drivers/ide/pci/nvidia.c In file included from drivers/ide/pci/nvidia.c:29: drivers/ide/pci/nvidia.h:35: `PCI_DEVICE_ID_NVIDIA_NFORCE_IDE' undeclared here ( not in a function) drivers/ide/pci/nvidia.h:35: initializer element is not constant drivers/ide/pci/nvidia.h:35: (near initialization for `nvidia_chipsets[0].device ') drivers/ide/pci/nvidia.h:43: initializer element is not constant drivers/ide/pci/nvidia.h:43: (near initialization for `nvidia_chipsets[0].enable bits[0]') drivers/ide/pci/nvidia.h:43: initializer element is not constant drivers/ide/pci/nvidia.h:43: (near initialization for `nvidia_chipsets[0].enable bits[1]') drivers/ide/pci/nvidia.h:43: initializer element is not constant drivers/ide/pci/nvidia.h:43: (near initialization for `nvidia_chipsets[0].enable bits') drivers/ide/pci/nvidia.h:46: initializer element is not constant drivers/ide/pci/nvidia.h:46: (near initialization for `nvidia_chipsets[0]') drivers/ide/pci/nvidia.c: In function `nforce_ratemask': drivers/ide/pci/nvidia.c:79: `PCI_DEVICE_ID_NVIDIA_NFORCE_IDE' undeclared (first use in this function) drivers/ide/pci/nvidia.c:79: (Each undeclared identifier is reported only once drivers/ide/pci/nvidia.c:79: for each function it appears in.) drivers/ide/pci/nvidia.c:80: warning: unreachable code at beginning of switch st atement drivers/ide/pci/nvidia.c: In function `ata66_nforce': drivers/ide/pci/nvidia.c:288: `PCI_DEVICE_ID_NVIDIA_NFORCE_IDE' undeclared (firs t use in this function) drivers/ide/pci/nvidia.c:289: warning: unreachable code at beginning of switch s tatement drivers/ide/pci/nvidia.c: At top level: drivers/ide/pci/nvidia.c:343: `PCI_DEVICE_ID_NVIDIA_NFORCE_IDE' undeclared here (not in a function) drivers/ide/pci/nvidia.c:343: initializer element is not constant drivers/ide/pci/nvidia.c:343: (near initialization for `nforce_pci_tbl[0].device ') make[4]: *** [drivers/ide/pci/nvidia.o] Error 1 make[3]: *** [drivers/ide/pci] Error 2 make[2]: *** [drivers/ide] Error 2 make[1]: *** [drivers] Error 2 make[1]: Leaving directory `/home/fsshl/linux-2.5.51' make: *** [stamp-build] Error 2 -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Intel(R) Desktop Board D845PESV; LAN drivers for Linux*.
[EMAIL PROTECTED] wrote: Hello Eric, Thank you for contacting Intel(R) Technical Support. Please download the latest LAN drivers for Linux* at the following URL: http://support.intel.com/support/go/linux/e100.htm These drivers are known to build properly on 2.2.x kernels through 2.2.20 and on 2.4.x kernels through 2.4.18. For the VE Adapter please use 2.4.x kernel. For Building and Installation procedures, please be sure to read the accompanying file, at the following link: ftp://aiedownload.intel.com/df-support/2896/ENG/e100.txt If the problem persists, please reply back with more detailed information regarding your inquiry. Please do not hesitate to contact us again if you need further assistance. Sincerely yours, Fernando S. Intel Technical Support Intel(R) Desktop Board Support Web Site http://support.intel.com/support/motherboards/desktop/ Intel is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as the property of others. A representative of Intel may subsequently contact you (via email) in order to obtain your feedback on the quality of the support you received. If you do not wish to participate, simply delete the survey email. 12/11/2002 05:06 PM ->my linux lspci show 02:08.0 Ethnet controller:Intel Corp: Unknown device 1039(rev 82) and can not modprobe eepro, many error, say it is dangerious isa chip, in 2.4.20 progeny or debian linux, so how to make that LAN work?(in linux?) ->##ERIGNORE## ->Name: Eric Lin ->Email: [EMAIL PROTECTED] ->Customer_type: OEM ->Product: Intel(R) Desktop Board D845PESV ->Product_id: 890 ->OS: Linux* ->Survey_opt_in: No ->Bios_version: SV84510A.86A ->Processor_manufacturer: Intel(R) ->Video_manufacturer: Other (please specify below) ->Video_model: nVidia NV6 ->Sound_manufacturer: On-Board Audio ->Sound_model: Sound Max ->Virus: none installed ->Issue: my linux lspci show 02:08.0 Ethnet controller:Intel Corp: Unknown device 1039(rev 82) and can not modprobe eepro, many error, say it is dangerious isa chip, in 2.4.20 progeny or debian linux, so how to make that LAN work?(in linux?) ->Form_id: 27 -> it (linux 2.4.20) work on e100, highly thanks sound AC97 in this board also not work in my 2.4.20(although some same 2.5.11 will work, but it is too difficult to install 2.5 kernel) would you please give me the driver? I ahve the other board, D845GBV also no sound in windowXP home Edition, when i install XP on the board, it especially warning me AC97 is not compatible with XP Home Ed, if I proceed install it may damage hardware then I try to proceed that software, the result is no sound, no mather I also install CD 's driver or your website's driver, so need help on that sincere Eric -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: need help on webserver or apache
Dear Pasha: I put the attached file to /etc/apache/httpd.conf and (1) when I type http://www.linuxpice.com/checkout it still a piece of white (2) I have a line in my /var/www/index.html http://www.linuxspice.com/cgi-bin/entrance.cgi"; method="post"> also have /var/www/cgi-bin directiory but when I hit submit form in my site , the browser appear Not Found The requested URL /cgi-bin/entrance.cgi was not found on this server. but as what I tried last time if I type http://www.linuxspice.com/checkout/index.html I do can see my site source in my /var/www/checkout/index.html so it seem have no change between your modify version and old debian version. please give more explanation or any linuxer's advice Eric --- pasha wrote: See attached file... Use diff to see the differences made; I kept all changes together - so it should be easy to spot. You should check the attached file for consistency with the way your system is setup (location of files, etc). With this setup you can keep you cgi's either in checkout directory or your system's cgi directory - but you must check to see if those cgi scripts are readable by www-data group!!! [You should also consider using mime-types - which will allow apache to handle certain file-types accordingly.] If you run into errors when restarting apache - check your /var/log/apache/error.log file. # This is the main server configuration file. See URL http://www.apache.org/ # for instructions. # Do NOT simply read the instructions in here without understanding # what they do, if you are unsure consult the online docs. You have been # warned. # Originally by Rob McCool # Shared Object Module Loading: # To be able to use the functionality of a module which was built # as a shared object you have to place corresponding `LoadModule' # lines at this location so the directives contained in it are # actually available _before_ they are used. # Example: # ServerType is either inetd, or standalone. ServerType standalone # If you are running from inetd, go to "ServerAdmin". # Port: The port the standalone listens to. For ports < 1023, you will # need httpd to be run as root initially. Port 80 # HostnameLookups: Log the names of clients or just their IP numbers # e.g. www.apache.org (on) or 204.62.129.132 (off) # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on. HostnameLookups off # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # User/Group: The name (or #number) of the user/group to run httpd as. # On SCO (ODT 3) use User nouser and Group nogroup # On HPUX you may not be able to use shared memory as nobody, and the # suggested workaround is to create a user www and use that user. User www-data Group www-data # ServerAdmin: Your address, where problems with the server should be # e-mailed. ServerAdmin webmaster@localhost # ServerRoot: The directory the server's config, error, and log files # are kept in. # NOTE! If you intend to place this on a NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation, # you will save yourself a lot of trouble. ServerRoot /etc/apache # BindAddress: You can support virtual hosts with this option. This option # is used to tell the server which IP address to listen to. It can either # contain "*", an IP address, or a fully qualified Internet domain name. # See also the VirtualHost directive. #BindAddress * # The Debian package of Apache loads every feature as shared modules. # Please keep this LoadModule: line here, it is needed for installation. # LoadModule vhost_alias_module /usr/lib/apache/1.3/mod_vhost_alias.so # LoadModule env_module /usr/lib/apache/1.3/mod_env.so LoadModule config_log_module /usr/lib/apache/1.3/mod_log_config.so # LoadModule mime_magic_module /usr/lib/apache/1.3/mod_mime_magic.so LoadModule mime_module /usr/lib/apache/1.3/mod_mime.so LoadModule negotiation_module /usr/lib/apache/1.3/mod_negotiation.so LoadModule status_module /usr/lib/apache/1.3/mod_status.so # LoadModule info_module /usr/lib/apache/1.3/mod_info.so # LoadModule includes_module /usr/lib/apache/1.3/mod_include.so LoadModule autoindex_module /usr/lib/apache/1.3/mod_autoindex.so LoadModule dir_module /usr/lib/apache/1.3/mod_dir.so LoadModule cgi_module /usr/lib/apache/1.3/mod_cgi.so # LoadModule asis_module /usr/lib/apache/1.3/mod_asis.so # LoadModule imap_module /usr/lib/apache/1.3/mod_imap.so # LoadModule action_module /usr/lib/apache/1.3/mod_actions.so # LoadModule speling_module /usr/lib/apache/1.3/mod_speling.so LoadModule userdir_module /usr/lib/apache/1.3/mod_userdir.so LoadModule alias_module /usr/lib/apache/1.3/mod_alias.so LoadModule rewrite_module /usr/lib/apache/1.3/mod_rewrite.so LoadModule acce
Re: need help on webserver or apache
Dear Pasha:
This is my var/log/apache/error.log
[Thu Dec 12 01:20:07 2002] [notice] caught SIGTERM, shutting down
[Thu Dec 12 01:21:36 2002] [alert] mod_unique_id: unable to
gethostbyname("www.linuxspice.com")
[Thu Dec 12 01:36:13 2002] [alert] mod_unique_id: unable to
gethostbyname("www.linuxspice.com")
[Thu Dec 12 01:45:15 2002] [notice] Apache/1.3.26 (Unix) Debian
GNU/Linux configured -- resuming normal operations
[Thu Dec 12 01:45:15 2002] [notice] suEXEC mechanism enabled (wrapper:
/usr/lib/apache/suexec)
[Thu Dec 12 01:45:15 2002] [notice] Accept mutex: sysvsem (Default: sysvsem)
[Thu Dec 12 01:58:21 2002] [notice] caught SIGTERM, shutting down
[Thu Dec 12 03:09:09 2002] [alert] mod_unique_id: unable to
gethostbyname("www.linuxspice.com")
[Thu Dec 12 03:13:25 2002] [notice] Apache/1.3.26 (Unix) Debian
GNU/Linux configured -- resuming normal operations
[Thu Dec 12 03:13:26 2002] [notice] suEXEC mechanism enabled (wrapper:
/usr/lib/apache/suexec)
[Thu Dec 12 03:13:26 2002] [notice] Accept mutex: sysvsem (Default: sysvsem)
[Thu Dec 12 03:32:46 2002] [error] [client 61.219.196.138] Client sent
malformed Host header
[Thu Dec 12 03:37:45 2002] [notice] caught SIGTERM, shutting down
[Thu Dec 12 03:39:17 2002] [notice] Apache/1.3.26 (Unix) Debian
GNU/Linux configured -- resuming normal operations
[Thu Dec 12 03:39:17 2002] [notice] suEXEC mechanism enabled (wrapper:
/usr/lib/apache/suexec)
[Thu Dec 12 03:39:17 2002] [notice] Accept mutex: sysvsem (Default: sysvsem)
[Thu Dec 12 03:49:15 2002] [notice] caught SIGTERM, shutting down
[Thu Dec 12 03:50:44 2002] [notice] Apache/1.3.26 (Unix) Debian
GNU/Linux configured -- resuming normal operations
[Thu Dec 12 03:50:45 2002] [notice] suEXEC mechanism enabled (wrapper:
/usr/lib/apache/suexec)
[Thu Dec 12 03:50:45 2002] [notice] Accept mutex: sysvsem (Default: sysvsem)
[Thu Dec 12 03:56:19 2002] [error] [client 64.91.61.186] script not
found or unable to stat: /usr/lib/cgi-bin/entrance.cgi
[Thu Dec 12 04:10:22 2002] [error] [client 64.91.61.186] script not
found or unable to stat: /usr/lib/cgi-bin/entrance.cgi
[Thu Dec 12 05:08:52 2002] [notice] caught SIGTERM, shutting down
[Thu Dec 12 05:10:24 2002] [notice] Apache/1.3.26 (Unix) Debian
GNU/Linux configured -- resuming normal operations
[Thu Dec 12 05:10:24 2002] [notice] suEXEC mechanism enabled (wrapper:
/usr/lib/apache/suexec)
[Thu Dec 12 05:10:24 2002] [notice] Accept mutex: sysvsem (Default: sysvsem)
[Thu Dec 12 05:12:39 2002] [error] [client 64.91.61.186] script not
found or unable to stat: /usr/lib/cgi-bin/entrance.cgi
pasha wrote:
What does your logfile say?
You have two problems, as I understand:
First, your apache doesn't seem to feed index.html when you access checkout
directory. A quick test would show relevant results:
put your index.html file into /var/www and then, using your favorite
browser, go to www.linuxspice.com. If your index.html page shows up without
explicitly stating it within the URL - then your problem is with the
checkout directory - meaning one (or several) of the following:
a) your checkout directory isn't readable/executable by www-data user or group
I chmod 777 for both directory(checout and cgi-bin in my /var/www
b) your directory is misconfigured in httpd.conf
it is you yesterday modified version now running in my /etc/apache/
c) you have an .htacess file within the directory that changes apache's
www:/var/www/cgi-bin# ls -a -l
total 12
drwxrwxrwx2 root root 4096 Dec 11 05:04 .
drwxr-xr-x6 root root 4096 Dec 12 03:55 ..
-rwxrwxrwx1 root root2 Dec 11 05:04 entrance.cgi
www:/var/www/cgi-bin# cd ../checkout
www:/var/www/checkout# ls -a -l
total 12
drwxrwxrwx2 root root 4096 Dec 11 11:53 .
drwxr-xr-x6 root root 4096 Dec 12 03:55 ..
-rw-r--r--1 root root 285 Dec 11 11:50 index.html
www:/var/www/checkout# cd ..
www:/var/www# ls -a -l
total 96
drwxr-xr-x6 root root 4096 Dec 12 03:55 .
drwxr-xr-x 15 root root 4096 Dec 6 10:26 ..
-rw---1 root root16384 Dec 12 03:55 .index.html.swp
drwxr-xr-x2 root root 4096 Dec 2 06:25 calamaris
drwxrwxrwx2 root root 4096 Dec 11 05:04 cgi-bin
drwxrwxrwx2 root root 4096 Dec 11 11:53 checkout
lrwxrwxrwx1 root root 55 Dec 9 12:49 docbook-dsssl ->
/usr/sh
are/sgml/docbook/stylesheet/dsssl/modular/images
-rw-r--r--1 root root 6466 Dec 12 03:48 index.html
-rw-r--r--1 root root 4798 Dec 8 05:46 old1index.html
-rw-r--r--1 root root 5761 Dec 8 20:16 old2index.html
-rw-r--r--1 root root 6786 Dec 9 01:07 old3index.html
-rw-r--r--1 root root 7741 Dec 9 01:08 old4.html
-rw-r--r--1 root root 6786 Dec 9 01:10 old5.html
-rw-r--r--1 root root 4546 Dec 11 22:59 oldindex.html
drwxr-xr-x2 root roo
Re: need help on webserver or apache
eric lin wrote: Dear Pasha: new error, after I go to my /usr/lib/cgi-bin/ to create a file entrance.cgi and put a space char in it. then chmod 777 that entrance.cgi and up one level, chmod 777 cgi-bin revisit my site, hit submit botton it show Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. please help pasha wrote: What does your logfile say? You have two problems, as I understand: First, your apache doesn't seem to feed index.html when you access checkout directory. A quick test would show relevant results: put your index.html file into /var/www and then, using your favorite browser, go to www.linuxspice.com. If your index.html page shows up without explicitly stating it within the URL - then your problem is with the checkout directory - meaning one (or several) of the following: a) your checkout directory isn't readable/executable by www-data user or group b) your directory is misconfigured in httpd.conf c) you have an .htacess file within the directory that changes apache's behavior upon access of the checkout directory. If your /var/www/index.html _isn't_ displayed by the browser when you access www.linuxspice.com then there could be other problems. In that case - increase the loglevel inside your httpd.conf and examine your logs during apache's restart. Your second problem is that your cgi isn't found, when accessed from within your html file. First off, make sure that the domain name actually resolves by your apache; you might wanna reference your cgi otherwise... Check yout httpd.conf for spelling errors (no one is perfect) Make sure that your cgi-bin directory is accessable by www-data group and your cgi script is executable and readable by www-data. Also, when I accessed www.linuxspice.com/checkout - it became evident that some page got loaded (look at the source). I suspect that your index.html file is erreneous. First off - there are no tags inside framesets. Framesets are comprised of definitions of frames. is seperate from framesets. :P On Thu, Dec 12, 2002 at 04:08:58AM -0700, eric lin wrote: Dear Pasha: I put the attached file to /etc/apache/httpd.conf and (1) when I type http://www.linuxpice.com/checkout it still a piece of white (2) I have a line in my /var/www/index.html http://www.linuxspice.com/cgi-bin/entrance.cgi"; method="post"> also have /var/www/cgi-bin directiory but when I hit submit form in my site , the browser appear Not Found The requested URL /cgi-bin/entrance.cgi was not found on this server. but as what I tried last time if I type http://www.linuxspice.com/checkout/index.html I do can see my site source in my /var/www/checkout/index.html so it seem have no change between your modify version and old debian version. please give more explanation or any linuxer's advice Eric --- pasha wrote: See attached file... Use diff to see the differences made; I kept all changes together - so it should be easy to spot. You should check the attached file for consistency with the way your system is setup (location of files, etc). With this setup you can keep you cgi's either in checkout directory or your system's cgi directory - but you must check to see if those cgi scripts are readable by www-data group!!! [You should also consider using mime-types - which will allow apache to handle certain file-types accordingly.] If you run into errors when restarting apache - check your /var/log/apache/error.log file. # This is the main server configuration file. See URL http://www.apache.org/ # for instructions. # Do NOT simply read the instructions in here without understanding # what they do, if you are unsure consult the online docs. You have been # warned. # Originally by Rob McCool # Shared Object Module Loading: # To be able to use the functionality of a module which was built # as a shared object you have to place corresponding `LoadModule' # lines at this location so the directives contained in it are # actually available _before_ they are used. # Example: # ServerType is either inetd, or standalone. ServerType standalone # If you are running from inetd, go to "ServerAdmin". # Port: The port the standalone listens to. For ports < 1023, you will # need httpd to be run as root initially. Port 80 # HostnameLookups: Log the names of clients or just their IP numbers # e.g. www.apache.org (on) or 204.62.129.132 (off) # The default is off because it'd be overall bette
access website or webpage not work
Dear Boyle: I using html to make a form and action , try to collect data from visitor and dump to some where im my file, but when I hit submit, it show Internal Server Error in my index.html I have a line http://www.linuxspice.com/cgi-bin/entrance.cgi";> do you know what may case wrong? /usr/lib/cgi-bin/entrance.cgi is already be created and have permision 777 I also mark out # in /etc/apache/httpd.conf Allowoverwrite none line looking to hear from you soon -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: access website or webpage not work
Robert L. Yelvington wrote: do you have suEXEC compiled into apache and if yes to previous question are you executing the cgi as the same user/group? How do I know suEXEC is compiled into apache? and if not how do I compile it in? hihgly appreciate your or any advancer's help ~r %-Original Message- %From: eric lin [mailto:[EMAIL PROTECTED]] %Sent: Thursday, December 12, 2002 10:33 AM %To: [EMAIL PROTECTED] %Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED] %Subject: access website or webpage not work % % %Dear Boyle: % % I using html to make a form and action , try to collect data from %visitor and dump to some where im my file, but when I hit submit, it show %Internal Server Error % %in my index.html I have a line % %http://www.linuxspice.com/cgi-bin/entrance.cgi";> % %do you know what may case wrong? %/usr/lib/cgi-bin/entrance.cgi is already be created and have permision 777 % %I also mark out # in /etc/apache/httpd.conf -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: [users@httpd] RE: access website or webpage not work
Dear Boyle:
i tried to put a simple perl file in my /usr/lib/cgi-bin/entrance.pl
#!/usr/local/bin/perl
use strict;
use CGI ':standrard';
print "Content-type: text/html\n\n";
foreach my $name (param()) {
my @cpu=param($name);
print "The field with the NAME attribute euual to
$name had a VALUE equal to @cpu\n";
and my
/var/www/index.html
have
http://www.linuxspice.com/cgi-bin/entrance.pl";>
reboot
when I click the submit bottom of my site in my browser it still
Internal Server Error
please help
Boyle Owen wrote:
All mails via the list, please - no personal mails.
Internal Server Error
means the CGI program did not work when the webserver tried to execute
it. There is a big tutorial about CGIs in the docs that came with
apache. Read that first, it explains this very point. Basic tips:
- test the program form the command line,
- check it outputs a CGI header before any other data
- does it work as the apache user (esp. if it has to write files etc.)
- does it have all the ENVs it needs (remember that it runs in a reduced
shell as apache user).
This is a problem with your CGI and not with apache - apache is working
perfectly which is why you get the 500 error :-)
Rgds,
Owen Boyle
-----Original Message-
From: eric lin [mailto:[EMAIL PROTECTED]]
Sent: Donnerstag, 12. Dezember 2002 17:33
To: Boyle Owen
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: access website or webpage not work
Dear Boyle:
I using html to make a form and action , try to collect data from
visitor and dump to some where im my file, but when I hit
submit, it show
Internal Server Error
in my index.html I have a line
http://www.linuxspice.com/cgi-bin/entrance.cgi";>
do you know what may case wrong?
/usr/lib/cgi-bin/entrance.cgi is already be created and have
permision 777
I also mark out # in /etc/apache/httpd.conf
Allowoverwrite none
line
looking to hear from you soon
--
Sincere Eric
www.linuxspice.com
linux pc for sale
This message is for the named person's use only. It may contain
confidential, proprietary or legally privileged information. No
confidentiality or privilege is waived or lost by any mistransmission.
If you receive this message in error, please notify the sender urgently
and then immediately delete the message and any copies of it from your
system. Please also immediately destroy any hardcopies of the message.
You must not, directly or indirectly, use, disclose, distribute, print,
or copy any part of this message if you are not the intended recipient.
The sender's company reserves the right to monitor all e-mail
communications through their networks. Any views expressed in this
message are those of the individual sender, except where the message
states otherwise and the sender is authorised to state them to be the
views of the sender's company.
-
The official User-To-User support forum of the Apache HTTP Server Project.
See http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: [EMAIL PROTECTED]
" from the digest: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: access website or webpage not work
nate wrote:
eric lin said:
Robert L. Yelvington wrote:
do you have suEXEC compiled into apache and if yes to previous question
are you executing the cgi as the same user/group?
How do I know suEXEC is compiled into apache? and if not how do I compile
it in?
I don't have much experience with suexec, but you can see if its turned
on by doing:
/usr/sbin/apache -l
if you see this:
suexec: enabled; valid wrapper /usr/lib/apache/suexec
yes , my is turn on
but it still have internal server error
i tried to put a simple perl file in my /usr/lib/cgi-bin/entrance.pl
#!/usr/local/bin/perl
use strict;
use CGI ':standrard';
print "Content-type: text/html\n\n";
foreach my $name (param()) {
my @cpu=param($name);
print "The field with the NAME attribute euual to
$name had a VALUE equal to @cpu\n";
and my
/var/www/index.html
have
http://www.linuxspice.com/cgi-bin/entrance.pl";>
reboot
when I click the submit bottom of my site in my browser it still
Internal Server Error
please help
or something similar it's turned on, if you see its disabled then it's
turned off
nate
--
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: newbie's apache , internal server error, please help
[Thu Dec 12 19:55:46 2002] [error] (2)No such file or directory: exec of
/usr/lib/cgi-bin/entrance.pl failed
[Thu Dec 12 19:55:46 2002] [error] [client 64.91.61.186] Premature end
of script headers: /usr/lib/cgi-bin/entrance.pl[Thu Dec 12 19:56:11
2002] [notice] caught SIGTERM, shutting down
[Thu Dec 12 19:57:45 2002] [notice] Apache/1.3.26 (Unix) Debian
GNU/Linux configured -- resuming normal operations
[Thu Dec 12 19:57:45 2002] [notice] suEXEC mechanism enabled (wrapper:
/usr/lib/apache/suexec)
[Thu Dec 12 19:57:45 2002] [notice] Accept mutex: sysvsem (Default: sysvsem)
[Thu Dec 12 19:59:37 2002] [error] (2)No such file or directory: exec of
/usr/lib/cgi-bin/entrance.pl failed
[Thu Dec 12 19:59:37 2002] [error] [client 64.91.61.186] Premature end
of script headers: /usr/lib/cgi-bin/entrance.pl[Thu Dec 12 20:13:08
2002] [error] (2)No such file or directory: exec of
/usr/lib/cgi-bin/entrance.pl failed
[Thu Dec 12 20:13:08 2002] [error] [client 6
this is my /var/log/apache/error.log
www:/home/fsshl# #!/usr/local/bin/perl
bash: !/usr/local/bin/perl: event not found
I tried first line of the command, but it immediately failed
hope to see your help again
Rodent of Unusual Size wrote:
eric lin wrote:
i tried to put a simple perl file in my /usr/lib/cgi-bin/entrance.pl
#!/usr/local/bin/perl
use strict;
use CGI ':standrard';
print "Content-type: text/html\n\n";
foreach my $name (param()) {
my @cpu=param($name);
print "The field with the NAME attribute euual to
$name had a VALUE equal to @cpu\n";
:
when I click the submit bottom of my site in my browser it still
Internal Server Error
the first thing to check in a case like this is the apache error
log (probably logs/error_log under the apache serverroot). next
is to try to run the script from the command line, though that's
somewhat difficult with the cgi module. try these and see what
messages you get; they'll be key to figuring out what to do next.
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: [users@httpd] RE: access website or webpage not work
www:/home/fsshl# which perl
/usr/bin/perl
www:/home/fsshl# env
SSH_AGENT_PID=507
KDE_MULTIHEAD=false
SHELL=/bin/bash
TERM=xterm
QT_XFT=0
GTK_RC_FILES=/etc/gtk/gtkrc:/home/fsshl/.gtkrc:/home/fsshl/.gtkrc-kde
USER=root
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.ogg=01;35:*.mp3=01;35:*.wav=01;35:
SSH_AUTH_SOCK=/tmp/ssh-XXQlcPCz/agent.503
USERNAME=fsshl
SESSION_MANAGER=local/www.linuxspice.com:/tmp/.ICE-unix/536
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/bin/X11:/usr/local/sbin:/usr/local/bin
PWD=/home/fsshl
LANG=C
GDM_LANG=C
PS1=\h:\w\$
GDMSESSION=KDE
SHLVL=3
HOME=/root
LOGNAME=fsshl
DISPLAY=:0.0
XAUTHORITY=/home/fsshl/.Xauthority
COLORTERM=
_=/usr/bin/env
my path have /usr/bin and perl is in it
it still not work
please help again
Chad Morland wrote:
Wrong path to your perl executable in the script you are using.
Type the following:
#which perl
And then replace that path with the one that you have in the script in
question. (chances are you are using something like /usr/bin/perl) If
that doesn't work then you don't have a perl executable in your $PATH.
Try the following and it should find it.
#find / -name perld
-CM
- Original Message -----
From: "eric lin" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Thursday, December 12, 2002 10:34 PM
Subject: Re: [users@httpd] RE: access website or webpage not work
Dear Boyle:
i tried to put a simple perl file in my
/usr/lib/cgi-bin/entrance.pl
#!/usr/local/bin/perl
use strict;
use CGI ':standrard';
print "Content-type: text/html\n\n";
foreach my $name (param()) {
my @cpu=param($name);
print "The field with the NAME attribute euual to
$name had a VALUE equal to @cpu\n";
and my
/var/www/index.html
have
action="http://www.linuxspice.com/cgi-bin/entrance.pl";>
reboot
when I click the submit bottom of my site in my browser it still
Internal Server Error
please help
Boyle Owen wrote:
All mails via the list, please - no personal mails.
Internal Server Error
means the CGI program did not work when the webserver tried to
execute
it. There is a big tutorial about CGIs in the docs that came with
apache. Read that first, it explains this very point. Basic tips:
- test the program form the command line,
- check it outputs a CGI header before any other data
- does it work as the apache user (esp. if it has to write files
etc.)
- does it have all the ENVs it needs (remember that it runs in a
reduced
shell as apache user).
This is a problem with your CGI and not with apache - apache is
working
perfectly which is why you get the 500 error :-)
Rgds,
Owen Boyle
-Original Message-
From: eric lin [mailto:[EMAIL PROTECTED]]
Sent: Donnerstag, 12. Dezember 2002 17:33
To: Boyle Owen
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: access website or webpage not work
Dear Boyle:
I using html to make a form and action , try to collect data from
visitor and dump to some where im my file, but when I hit
submit, it show
Internal Server Error
in my index.html I have a line
http://www.linuxspice.com/cgi-bin/entrance.cgi";>
do you know what may case wrong?
/usr/lib/cgi-bin/entrance.cgi is already be created and have
permision 777
I also mark out # in /etc/apache/httpd.conf
This message is for the named person's use only. It may contain
confidential, proprietary or legally privileged information. No
confidentiality or privilege is waived or lost by any
mistransmission.
If you receive this message in error, please notify the sender
urgently
and then immediately delete the message and any copies of it from
your
system. Please also immediately destroy any hardcopies of the
message.
You must not, directly or indirectly, use, disclose, distribute,
print,
or copy any part of this message if you are not the intended
recipient.
The sender's company reserves the right to monitor all e-mail
communications through their networks. Any views expressed in this
message are those of the individual sender, except where the message
states otherwise and the sender is authorised to state them to be
the
views of the sender's company.
-
The official User-To-User support forum of the Apache HTTP Server
Project.
See http://httpd.apache.org/userslist.html> for more info.
To unsubs
did any one know sis305 agp is what chipset in xfree86 4?
Dear Linuxer: did any one know sis305 agp is what chipset in xfree86 4? -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: newbie's apache , internal server error, please help
Rodent of Unusual Size wrote:
eric lin wrote:
[Thu Dec 12 19:55:46 2002] [error] (2)No such file or directory: exec of
/usr/lib/cgi-bin/entrance.pl failed
this usually means that the interpreter in the shebang line of
the script is incorrect. or possibly that the script file
has dos line endings.
what does 'ls -lag /usr/local/bin/perl' say?
edit the script file ('vi entrance.pl'); does the status line
at the bottom say 'dos'?
www:/home/fsshl# #!/usr/local/bin/perl
bash: !/usr/local/bin/perl: event not found
no, *execute* the script, don't type it interactively. that is,
try
www:/home/fsshl# /usr/lib/cgi-bin/entrance.pl
Thanks your hint on this
so I change my .pl file to #!/usr/bin/perl which is my path in env
so I tried hit submit bottom this time, the browser did not show error,
but it show a piece of white, that may be improve, but not what I want
I want to colletec date from visiter and print it out
(at least at beginning)
my pl is
#!/usr/bin/perl
use strict;
use CGI ':standrard';
print "Content-type: text/html\n\n";
foreach my $name (param()) {
my @cpu=param($name);
print "The field with the NAME attribute euual to
$name had a VALUE equal to @cpu\n";
}
Please help again
instead.
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
what is perl 's syntax or grammer?(toward e-commerce)
Dear website developer or linuxer:
I follow two boods, one is "HTML for the World Wide Web with XHTML
and CSS" the other is "Teach yourself WEbPublishing with HTML and XHTML"
may be best weblanguage is java or java script, let me explore html and
cgi and perl first
by many try, when I hit my submit bottom , it finally show somthing
This is example of CGI Script
-my entrance.cgi
#!/usr/bin/perl
use strict;
use CGI ':standard';
my @param=param();
print "Content-type: text/html\n\n";
print "\n";
print "This is an example CGI script.\n";
foreach my $name (param()) {
my @value = param($name);
print "The field with the NAME attriabute equal to
$name had a VALUE equal to @value\n";
}
print "";
--
but that is not correct or good enough, I still expect the print out the
name field i collect from visitor(ie CPU, motherboard, harddisk, etc...)
and value field( the price of cpu, motherboard, harddisk, etc...)
please help
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
could we use c replace perl in cgi program?
Dear advanced webprogramers or linuxer:
Could we using c replace perl in cgi programming?
I tried a simple c program(although it not compile write)
to parse the name and value it inherate from visitor hit the submit form
#include
int main()
{
extern char name[][];
extern char value[][];
printf("Content-type: text/html\n\n");
printf("\n");
printf("the price fo ", name[1], " equal ", value[1], "\n");
printf("");
}
--
like to see any of you 's opinion
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
after change action for test, website can not access, please help
Dear cgilib user, linuxer: When I change my /var/www/index.html 's action of form to what post in http://www.infodrom.org/projects/cgilib/test.php3 after I hit submit bottom, my browser show me Not Found The requested URL /cgi-bin/cgitest/listall was not found on this server. please help -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: [users@httpd] could we use c replace perl in cgi program?
Dear J. Greelees:
Thanks your reply, some frined email me a link : cgilib
<http://www.infodrom.org/projects/cgilib/>
is the module you mean is in that site's cgllib?
from that site I see paring name from form and cookie, so far I do not
want care cookie, just want to see the paring name and value from
/var/www/index.html 's form action
(probably I should add #include
and
name = cgiGetValue (cgi, "name"); /* but I have many name in my
index.html, to collect data from visitor, and value */
like to see what is your opinion on that
/* but I fail to get what expected following its Testsuite */
J. Greenlees wrote:
eric lin wrote:
Dear advanced webprogramers or linuxer:
Could we using c replace perl in cgi programming?
I tried a simple c program(although it not compile write)
to parse the name and value it inherate from visitor hit the submit form
#include
int main()
{
extern char name[][];
extern char value[][];
printf("Content-type: text/html\n\n");
printf("\n");
printf("the price fo ", name[1], " equal ", value[1], "\n");
printf("");
}
--
like to see any of you 's opinion
yes, c can be used as cgi.
just trying to remember the module needed to add the functionality.
-
The official User-To-User support forum of the Apache HTTP Server Project.
See http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: [EMAIL PROTECTED]
" from the digest: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: PostgerSQL 7.3 packages for woody
Oliver Elphick wrote: Packages of PostgreSQL 7.3 built for woody are available at http://people.debian.org/~elphick when I do apt-get isntall postgresql it finaaly response error Setting up postgresql (7.3rel-7) ... initdb: pg_encoding failed Make sure the program was installed correctly. dpkg: error processing postgresql (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: postgresql E: Sub-process /usr/bin/dpkg returned an error code (1) please help -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: [users@httpd] could we use c replace perl in cgi program?
J. Greenlees wrote:
actually, I think that it's apache's suexec directive I was thinking about.
if all you want is transparent url's, so that visitors don't see the
site, that can easilt be accomplished with the scripts themselves,
without using additional modules.
not yet to security, I ((and visitors )just want to see the data they
fill in after they hit submit botton that can be displayed in the browser,
I did not know whether is because in my /etc/apache/httpd.conf I did
not do enough load module especially with perl, so I can not catch the
name and value of the form at first webpge they fill.
looking for more hint and help
you might want to read more about the scripting languages available, and
how to use them before altering apache to hide the form action data.
eric lin wrote:
Dear J. Greelees:
Thanks your reply, some frined email me a link : cgilib
<http://www.infodrom.org/projects/cgilib/>
is the module you mean is in that site's cgllib?
from that site I see paring name from form and cookie, so far I do not
want care cookie, just want to see the paring name and value from
/var/www/index.html 's form action
(probably I should add #include
and
name = cgiGetValue (cgi, "name"); /* but I have many name in my
index.html, to collect data from visitor, and value */
like to see what is your opinion on that
/* but I fail to get what expected following its Testsuite */
J. Greenlees wrote:
eric lin wrote:
Dear advanced webprogramers or linuxer:
Could we using c replace perl in cgi programming?
I tried a simple c program(although it not compile write)
to parse the name and value it inherate from visitor hit the submit
form
#include
int main()
{
extern char name[][];
extern char value[][];
printf("Content-type: text/html\n\n");
printf("\n");
printf("the price fo ", name[1], " equal ", value[1], "\n");
printf("");
}
--
like to see any of you 's opinion
yes, c can be used as cgi.
just trying to remember the module needed to add the functionality.
-
The official User-To-User support forum of the Apache HTTP Server
Project.
See http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: [EMAIL PROTECTED]
" from the digest: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
-
The official User-To-User support forum of the Apache HTTP Server Project.
See http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: [EMAIL PROTECTED]
" from the digest: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: could we use c replace perl in cgi program?
Elizabeth Barham wrote: eric lin <[EMAIL PROTECTED]> writes: Did you ever subscribe the mailling list in infodrom-cgilib it seem not work, also the two people on that site's email address is also can not be accessable. No, I just downloaded and used their library. Elizabeth after I untar, make, make install, it have error www:/home/fsshl/cgilib-0.5# make install cc -I. -Wall -O2 -g -c -o cgitest.o cgitest.c cgitest.c: In function `main': cgitest.c:116: parse error before `Library' make: *** [cgitest.o] Error 1 please help -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
is cgilib by apt-get install, same package as download form infodrom.orgsite?
Dear Linuxer: Is cgilib by apt-get install same as we download from cgilib from http://www.infodrom.org/projects/cgilib/use.php3 ? -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: PostgerSQL 7.3 packages for woody
Oliver Elphick wrote: On Fri, 2002-12-13 at 16:20, eric lin wrote: Oliver Elphick wrote: Packages of PostgreSQL 7.3 built for woody are available at http://people.debian.org/~elphick when I do apt-get isntall postgresql it finaaly response error Setting up postgresql (7.3rel-7) ... initdb: pg_encoding failed ... please help This is a new one... First of all, can you do this: $ /usr/lib/postgresql/bin/pg_encoding 2 EUC_CN If that is OK, try (as user postgres): $ pg_encoding 2 If that fails, the search path is wrong; /etc/postgresql/postgresql.env (from package postgresql-client) needs to be sourced by postgres's .profile this step I failed, both as root and end-user, so how should I modify?(at /etc/postgresql/postgresql.env ? or anywhere to do anything?) please help again If that works, make sure $PGDATA is empty and owned by postgres, or non-existent and able to be created by postgres. Then (change C and SQL_ASCII to suit your site): $ LANG=C initdb --debug --pgdata $PGDATA --encoding SQL_ASCII This will produce a lot of output, but it should indicate what is going wrong. Post the relevant bits. -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
internal server error, please help
David Z Maze wrote:
eric lin <[EMAIL PROTECTED]> writes:
I follow two boods, one is "HTML for the World Wide Web with XHTML
and CSS" the other is "Teach yourself WEbPublishing with HTML and
XHTML"
may be best weblanguage is java or java script, let me explore html
and cgi and perl first
(Disagreeing with Colin Watson, I actually do like Java as a
language. I agree that JavaScript is to be avoided whenver possible,
though. The Java runtime still feels pretty heavy-weight to me; I
wouldn't try writing CGI scripts in it, for example.)
-my entrance.cgi
#!/usr/bin/perl
use strict;
use CGI ':standard';
my @param=param();
print "Content-type: text/html\n\n";
print "\n";
print "This is an example CGI script.\n";
foreach my $name (param()) {
my @value = param($name);
Are you sure you don't mean $value here?
print "The field with the NAME attriabute equal to
$name had a VALUE equal to @value\n";
...and here? I'd probably change this loop to something like
foreach my $name (@param) {
print "$name: " . param($name) . "\n";
}
Thanks your reply, but it is not work( I did not know why yet, maybe
some where in my /etc/apache/httpd.conf I should add load mod_perl
any hint?
}
print "";
If you're lost on basics of Perl (e.g. what $, %, and @ mean before
variable names, how $foo, $foo{bar}, %foo are related, etc.) you might
want to spend a lot of time reading the Perl documentation, and/or
buying one of the O'Reilly Perl books if you're into dead trees. 'man
perlintro' might be informative, along with reading some of the other
man pages listed in 'man perl'. Also, to get documentation on a
specific Perl package, you can do e.g. 'perldoc CGI'.
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
install /oss sound drive, directory not match, please help
Dear Linuxer: when I install oss 's sound drive, enable auto load at boot time, it response No /etc/rc.d/init.d directory. Couldn't do this do't know how to do this in your system please help -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
after install mod_perl, still can not work well
Dear experienced webmaster or linuxer:
I download mod_perl 1.27 and install it also at my /etc/apache/httpd
add a line
LoadModule perl_module /usr/lib/apache/1.3/mod_perl.so
with my simple script /usr/lib/cgi-bin/entrance.cgi
#!/usr/bin/perl-wT
use strict;
use CGI ':standard';
use CGI qw(:standard);
my @param=param();
print "Content-type: text/html\n\n";
print "\n";
print "This is an example CGI script.\n";
foreach my $name (param()) {
my @value = param($name);
print "The field with the NAME attriabute equal to
$name had a VALUE equal to @value\n";
}
print "";
--
it should show more than
This is an example CGI script
when I hit the submit bottom, but name and value
it is not what I expected, please help
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: could we use c replace perl in cgi program?
David Z Maze wrote:
eric lin <[EMAIL PROTECTED]> writes:
Dear advanced webprogramers or linuxer:
Could we using c replace perl in cgi programming?
Sure, nothing's intrinsically tied to Perl at all. Look at
http://hoohoo.ncsa.uiuc.edu/cgi/overview.html for the CGI
specification, including a listing of the environment variables that
could be set.
I tried a simple c program(although it not compile write)
to parse the name and value it inherate from visitor hit the submit form
#include
int main()
{
extern char name[][];
extern char value[][];
printf("Content-type: text/html\n\n");
printf("\n");
printf("the price fo ", name[1], " equal ", value[1], "\n");
printf("");
}
--
Well, sure, where do you expect name and value to actually be defined?
(I don't think 'extern' is allowed to modify local variables in any
case.) You also might look for C CGI libraries if this would make you
happy; there seems to be a libcgicg1-dev package in unstable, which
appears to provide the right functionality.
may be after I install what you recommand's libcgicg1-dev package
it have test-cgi in my /usr/lib/cgi-bin/ so I change my
/var/www/index.html's form point to it
http://www.linuxspice.com//cgi-bin/test-cgi";>
after I use my browser to hit the submit bottom, it show Forbidden
You don't have permission to access //cgi-bin/test-cgi on this server.
Apache/1.3.26 Server at default.itsyourdomain.com Port 80
even I chmod 777 test-cgi
need advancer's advice
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: what is perl 's syntax or grammer?
Colin Watson wrote: On Fri, Dec 13, 2002 at 05:06:48AM -0700, eric lin wrote: may be best weblanguage is java or java script, let me explore html and cgi and perl first Neither Java nor JavaScript is a worthwhile language in my opinion. Perl is fine, but you'll never get anywhere in any language by not reading the documentation. Put another way, you can get it wrong in any language; don't blame the language for it. See 'man perl' and the many documents to which it refers. See 'man CGI'. Try setting in the environment REQUEST_METHOD=GET and QUERY_STRING to whatever the browser sends, so that is my /var/www/index.html (form field?) or /usr/lib/cgi-bin/entrance.cgi(at beginning?) or anywhere ? please help again and then using the Perl debugger. but that is not correct or good enough, I still expect the print out the name field i collect from visitor(ie CPU, motherboard, harddisk, etc...) and value field( the price of cpu, motherboard, harddisk, etc...) It looks like it works fine to me. Maybe your form's wrong, I have no idea. If you're doing e-commerce, you might be better off hiring a consultant rather than sending half a dozen nearly-identical messages a day to debian-user. Cheers, -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: could we use c replace perl in cgi program?
Elizabeth Barham wrote:
1) If you want to install that library, you ought to do it manually
as the way the Makefile is, it will not work correctly.
highly apprecaite you point out how to "as the way the Makefile
is"(modify Makefile in cgilib-0.5? by adding or deleting or modifying
anything?)?
some in debian seem also have a package do about using c replace perl
-(some debian 's camp's friend---
Well, sure, where do you expect name and value to actually be defined?
(I don't think 'extern' is allowed to modify local variables in any
case.) You also might look for C CGI libraries if this would make you
happy; there seems to be a libcgicg1-dev package in unstable, which
appears to provide the right functionality.
---I install what he recommand--
2) The error is within cgitest.c, specifically:
printf ("Cookie "Library" set\n");
which can be remedied by modifing the line to:
printf ("Cookie \"Library\" set\n");
Elizabeth
this is my c program try, to achieve get data out from html's submit
and form, if it is not a dream
I tried a simple c program(although it not compile write)
> to parse the name and value it inherate from visitor hit the submit form
>
>
>
> #include
>
> int main()
> {
> extern char name[][];
> extern char value[][];
>
>
> printf("Content-type: text/html\n\n");
> printf("\n");
> printf("the price fo ", name[1], " equal ", value[1], "\n");
> printf("");
> }
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: [users@httpd] Re: what is perl 's syntax
Philip M. Gollucci wrote:
see
perldoc -f print
for why
also see perldoc CGI
#!/usr/bin/perl -wT
use strict;
use CGI qw (:standard);
print header();
print start_html();
print "This is an exmaple CGI script.\n";
foreach (param()) {
print "\n";
print "$_ has value(s) => ";
print param($_);
print "\n";
}
print end_html();
Same thing, only show "This is an example CGI script."
I keep doubt it is my httpd and perl module did not configure well
any opinion?
#!/usr/bin/perl-wT
use strict;
use CGI ':standard';
use CGI qw(:standard);
my @param=param();
print "Content-type: text/html\n\n";
print "\n";
print "This is an example CGI script.\n";
foreach my $name (param()) {
my @value = param($name);
print "The field with the NAME attriabute equal to
$name had a VALUE equal to @value\n";
}
print "";
On Sat, 2002-12-14 at 10:22, eric lin wrote:
Dave Sherohman wrote:
On Fri, Dec 13, 2002 at 01:02:10PM -0500, David Z Maze wrote:
foreach my $name (param()) {
my @value = param($name);
Are you sure you don't mean $value here?
Not necessarily. param() returns the first value associated with the
name whan called in scalar context or a list of all values associated
with the name in list context.
print "The field with the NAME attriabute equal to
$name had a VALUE equal to @value\n";
...and here? I'd probably change this loop to something like
foreach my $name (@param) {
print "$name: " . param($name) . "\n";
}
foreach my $name (@param) {
print "$name: " . join ', ', param($name) . "\n";
}
I tried yours , still not work well(only the Thisis cgi be shown in my
browser)
are you guy prety sure it is not httpd's config have problem but my
script program not good enough? (like perl module loading or config?)
fsshl@www:~$ cat /usr/lib/cgi-bin/entrance.cgi
#!/usr/bin/perl-wT
use strict;
use CGI ':standard';
use CGI qw(:standard);
my @param=param();
print "Content-type: text/html\n\n";
print "\n";
print "This is an example CGI script.\n";
foreach my $name (param()) {
my @value = param($name);
print "The field with the NAME attriabute equal to
$name had a VALUE equal to @value\n";
}
print "";
-
The official User-To-User support forum of the Apache HTTP Server Project.
See http://httpd.apache.org/userslist.html> for more info.
To unsubscribe, e-mail: [EMAIL PROTECTED]
" from the digest: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
Sincere Eric
www.linuxspice.com
linux pc for sale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
how to trans jpg to gif
Dear linuxer: Do any one know how to change jpg to gif?(I guess we can not show jpg file from other people's page directly) highly apprecaite -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: about web link
not work by direct static ip as url either on http://***>. but hyperlink with http://www.mycompany.com/photo.jpg work, every from othersite (from www.finitesite.com -- it is a free webhosting site) do not know why, hope experienced webmaster give me more hints highly apprecaite Vineet Kumar wrote: * eric ([EMAIL PROTECTED]) [021221 18:54]: http://www.linuxspice.com/case0.jpg"; width="96" height="64"> This is WAY off topic. /* it will help many newcomer too not just me */ Here's your fish for the day: http://64.91.61.186/case.jpg"; width="96" height="64"> Sincere Eric www.linuxspice.com linux/window pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
not work
No perl, in IE or netscape's URL, is I type http://www.linuxspice.com/case0.jpg I can see my photo but my html.index of C:\apach2\htdocs\ or /var/www/index.html if I have a line class="rightsidebar"> http://www.linuxspice.com/case.jpg"; width="200" height="150"> The URL in the quote if be replaced by just case.jpg then it can show photo in my website page(I have case0.jpg in both my \C:Apache2\htdocs or /var/www) Actually in the start apache2 in dos mode, I get some error or warning message (730048)Only one usage of each socket address (protocal/network address/port) is normally permitted. : make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down please hlep -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: how to trans jpg to gif
Hi nate: Some Last article you ever mention about broadcast to other site not by hyperlink or upload but directly by owncompany's real time concurcent server is high trafic, and is not allow at some site. Is that possible not because my perl or apache not configure well but becase my this idea to broadcast to web be blocked by my isp? that company called centurytel.net or .com, I also have a credit transaction site can be access. probably related about them. hope to see your or any advancer's advice(if that is what I guess, I may be switch isp in short time) nate wrote: eric lin said: Dear linuxer: Do any one know how to change jpg to gif?(I guess we can not show jpg file from other people's page directly) try the 'convert' program from imagemagick nate -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
high traffic problem
The advertisement of ebay sale or bidding , they all free to broadcast their onw graph or photo by themselves, I also try(but of course fail) that actually is not difficult just in their html http://yoursite/photo.jpg";>, and I do not think ebay specifically block me. So I guess is ISP level makeing problem. just to see any one have experience on this, so can give me some advice to deal with my isp to took off restriction or switch. nate wrote: eric lin said: Hi nate: Some Last article you ever mention about broadcast to other site not by hyperlink or upload but directly by owncompany's real time concurcent server is high trafic, and is not allow at some site. Is that possible not because my perl or apache not configure well but becase my this idea to broadcast to web be blocked by my isp? that company called centurytel.net or .com, I also have a credit transaction site can be access. probably related about them. hope to see your or any advancer's advice(if that is what I guess, I may be switch isp in short time) if your referring to blocking according to the referrer header, this is possible, most sites don't do it. If you are certain your loading the image correctly, contact the webmaster of the site your linking to and ask them. nate -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
not work, plese help
Dear Adam: I am using Debain progeny on 2.4.20, my question in hyper link to access my site 's photo or file work, but directly show pic by putting a code http://ippath/photo.jpg";> not work, so I have to took off the http://ippath/ and copy my photo.jpg to /var/www/ directory that restrict me post file or photo only at my own site, not to other's site-and it is not that site intend to block, ie ebay I suspect my system setting or isp level have problem Need advice of any one on firewall knowledge -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
[Fwd: Re: not work,]
www:/home/fsshl# iptables -L -nv Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination --- my iptables is just install from apt-get install (unstable) Simon Bland wrote: > I'm really not sure on that, I generally use iptables, independent of a > specific firewall package. If you are using an iptables one, try: > > iptables -L -nv > > This will give a dump of all the loaded rules, if that doesn't work, > well I'm not 100% up on ipchains.. > www:/home/fsshl# ipchains -L -nv ipchains: Incompatible with this kernel my ipchains is 1.3.10, kernel is 2.4.20 Plese help why my iptables show nothing? highly apprecaite , Eric -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: [Fwd: Re: not work,]
Dear Bill or any linuxer: I think what I miss is port-forwarding, (if I guess is not correct please justify me) hope to see your advice and hlep again, and thanks in advance Bill Moseley wrote: On Mon, 23 Dec 2002, eric lin wrote: www:/home/fsshl# iptables -L -nv Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Plese help why my iptables show nothing? Good question!: http://www.netfilter.org/ http://www.linuxguruz.org/iptables/howto/ -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: not work,
Thomas Braun wrote: eric lin wrote: www:/home/fsshl# iptables -L -nv Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination --- my iptables is just install from apt-get install (unstable) www:/home/fsshl# ipchains -L -nv ipchains: Incompatible with this kernel my ipchains is 1.3.10, kernel is 2.4.20 Plese help why my iptables show nothing? I think this is not a Firewall problem,there are no Firewall rules, what tells you your access.log or error.log? my access log have 304 and 404 error when It try to access that http://ipath/file'> www:/var/log/apache# iptables -t nat -Lnv iptables: Table does not exist (do you need to insmod?) www:/var/log/apache# insmod iptables insmod: iptables: no module by that name found www:/var/log/apache# what tells you iptables -t nat -Lnv it indeed is difficult for me to realize what is that mean highly apprecaite your reply, and hope to see more cu thomas highly apprecaite , Eric -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: not work,
thanks your replying follow your instruct in bash shell www:/home/fsshl# telnet localhost 80 Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused www:/home/fsshl# Get /file HTTP/1.0 bash: Get: command not found www:/home/fsshl# telnet localhost 80 Get /file HTTP/1.0 Usage: telnet [-4] [-6] [-8] [-E] [-L] [-a] [-d] [-e char] [-l user] [-n tracefile] [-r] [host-name [port]] -- ---access.log- 213.191.132.131 - - [23/Dec/2002:11:24:25 -0700] "GET / HTTP/1.0" 200 8243 213.191.132.131 - - [23/Dec/2002:11:24:51 -0700] "GET /case.jpg HTTP/1.0" 200 324850 213.191.132.131 - - [23/Dec/2002:11:24:52 -0700] "GET /computer2G.jpg HTTP/1.0" 200 282132 213.191.132.131 - - [23/Dec/2002:11:24:54 -0700] "GET /intelcpu2g.jpg HTTP/1.0" 200 5614 213.191.132.131 - - [23/Dec/2002:11:25:13 -0700] "GET /cdrom.jpg HTTP/1.0" 200 209235 213.191.132.131 - - [23/Dec/2002:11:25:13 -0700] "GET /motherboard.jpg HTTP/1.0" 200 239258 194.97.55.146 - - [23/Dec/2002:11:47:19 -0700] "CONNECT mtrap.freenet.de:25 HTTP/1.0" 405 231 194.97.55.146 - - [23/Dec/2002:11:47:20 -0700] "POST http://mtrap.freenet.de:25 HTTP/1.0" 405 228 194.97.55.146 - - [23/Dec/2002:11:47:20 -0700] "POST http://mail.centurtel.net:25 HTTP/1.0" 405 228 194.97.55.146 - - [23/Dec/2002:11:47:21 -0700] "POST http://localhost:25 HTTP/1.0" 405 228 63.205.225.170 - - [23/Dec/2002:13:39:08 -0700] "GET /case0.jpg HTTP/1.1" 404 215 63.205.225.170 - - [23/Dec/2002:13:39:15 -0700] "GET /case.jpg%22 HTTP/1.1" 404 215 63.205.225.170 - - [23/Dec/2002:13:39:32 -0700] "GET / HTTP/1.1" 200 8243 63.205.225.170 - - [23/Dec/2002:13:39:33 -0700] "GET /intelcpu2g.jpg HTTP/1.1" 200 5614 63.205.225.170 - - [23/Dec/2002:13:39:53 -0700] "GET /videocard.jpg HTTP/1.1" 200 231610 63.205.225.170 - - [23/Dec/2002:13:39:54 -0700] "GET /computer2G.jpg HTTP/1.1" 200 282132 63.205.225.170 - - [23/Dec/2002:13:40:03 -0700] "GET /case.jpg HTTP/1.1" 200 324850 63.205.225.170 - - [23/Dec/2002:13:40:11 -0700] "GET /memory.jpg HTTP/1.1" 200 104716 63.205.225.170 - - [23/Dec/2002:13:40:15 -0700] "GET /cdrom.jpg HTTP/1.1" 200 209235 63.205.225.170 - - [23/Dec/2002:13:40:35 -0700] "GET /harddisk.jpg HTTP/1.1" 200 254781 63.205.225.170 - - [23/Dec/2002:13:40:36 -0700] "GET /memory.jpg HTTP/1.1" 200 236343 63.205.225.170 - - [23/Dec/2002:13:40:46 -0700] "GET /motherboard.jpg HTTP/1.1" 200 406002 63.205.225.170 - - [23/Dec/2002:13:40:50 -0700] "GET /monitor.jpg HTTP/1.1" 200 97354 63.205.225.170 - - [23/Dec/2002:13:42:49 -0700] "GET /monitor.jpg HTTP/1.1" 200 356336 64.91.61.186 - - [23/Dec/2002:13:45:52 -0700] "GET / HTTP/1.1" 200 8243 64.91.61.186 - - [23/Dec/2002:13:45:53 -0700] "GET /computer2G.jpg HTTP/1.1" 304 - 64.91.61.186 - - [23/Dec/2002:13:45:53 -0700] "GET /motherboard.jpg HTTP/1.1" 304 - 64.91.61.186 - - [23/Dec/2002:13:45:54 -0700] "GET /case.jpg HTTP/1.1" 304 - 64.91.61.186 - - [23/Dec/2002:13:45:54 -0700] "GET /intelcpu2g.jpg HTTP/1.1" 304 - 64.91.61.186 - - [23/Dec/2002:13:45:54 -0700] "GET /cdrom.jpg HTTP/1.1" 304 - 64.91.61.186 - - [23/Dec/2002:13:45:55 -0700] "GET /memory.jpg HTTP/1.1" 304 - 64.91.61.186 - - [23/Dec/2002:13:45:59 -0700] "GET /videocard.jpg HTTP/1.1" 304 - 64.91.61.186 - - [23/Dec/2002:13:45:59 -0700] "GET /monitor.jpg HTTP/1.1" 304 - 64.91.61.186 - - [23/Dec/2002:13:46:02 -0700] "GET /harddisk.jpg HTTP/1.1" 304 - "access.log" 74L, 6232C -- error.log- [Mon Dec 23 13:39:08 2002] [error] [client 63.205.225.170] File does not exist: /var/www/case0.jpg [Mon Dec 23 13:39:15 2002] [error] [client 63.205.225.170] File does not exist: /var/www/case.jpg" - hope to see your or any advancer's help again thanks in advance Brad Lay wrote: telnet localhost 80 GET /file HTTP/1.0 (Thats ENTER, ENTER.) What happens then? Look in the access.log and error.log as well. You might want to tag a | less on the end of the telnet line, if you need to scroll. Try that and see what happens. -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: not work,
Juris Smits wrote: Hello eric, Tuesday, December 24, 2002, 12:40:49 AM, you wrote: el> thanks your replying el> follow your instruct in el> bash shell el> www:/home/fsshl# telnet localhost 80 el> Trying ::1... el> Trying 127.0.0.1... el> telnet: Unable to connect to remote host: Connection refused el> www:/home/fsshl# Get /file HTTP/1.0 el> bash: Get: command not found el> www:/home/fsshl# telnet localhost 80 Get /file HTTP/1.0 el> Usage: telnet [-4] [-6] [-8] [-E] [-L] [-a] [-d] [-e char] [-l user] el> [-n tracefile] [-r] [host-name [port]] el> -- el> ---access.log- el> 213.191.132.131 - - [23/Dec/2002:11:24:25 -0700] "GET / HTTP/1.0" 200 8243 el> 213.191.132.131 - - [23/Dec/2002:11:24:51 -0700] "GET /case.jpg el> HTTP/1.0" 200 324850 el> 213.191.132.131 - - [23/Dec/2002:11:24:52 -0700] "GET /computer2G.jpg el> HTTP/1.0" 200 282132 el> 213.191.132.131 - - [23/Dec/2002:11:24:54 -0700] "GET /intelcpu2g.jpg el> HTTP/1.0" 200 5614 el> 213.191.132.131 - - [23/Dec/2002:11:25:13 -0700] "GET /cdrom.jpg el> HTTP/1.0" 200 209235 el> 213.191.132.131 - - [23/Dec/2002:11:25:13 -0700] "GET /motherboard.jpg el> HTTP/1.0" 200 239258 el> 194.97.55.146 - - [23/Dec/2002:11:47:19 -0700] "CONNECT el> mtrap.freenet.de:25 HTTP/1.0" 405 231 el> 194.97.55.146 - - [23/Dec/2002:11:47:20 -0700] "POST el> http://mtrap.freenet.de:25 HTTP/1.0" 405 228 el> 194.97.55.146 - - [23/Dec/2002:11:47:20 -0700] "POST el> http://mail.centurtel.net:25 HTTP/1.0" 405 228 el> 194.97.55.146 - - [23/Dec/2002:11:47:21 -0700] "POST http://localhost:25 el> HTTP/1.0" 405 228 el> 63.205.225.170 - - [23/Dec/2002:13:39:08 -0700] "GET /case0.jpg el> HTTP/1.1" 404 215 el> 63.205.225.170 - - [23/Dec/2002:13:39:15 -0700] "GET /case.jpg%22 el> HTTP/1.1" 404 215 el> 63.205.225.170 - - [23/Dec/2002:13:39:32 -0700] "GET / HTTP/1.1" 200 8243 el> 63.205.225.170 - - [23/Dec/2002:13:39:33 -0700] "GET /intelcpu2g.jpg el> HTTP/1.1" 200 5614 el> 63.205.225.170 - - [23/Dec/2002:13:39:53 -0700] "GET /videocard.jpg el> HTTP/1.1" 200 231610 el> 63.205.225.170 - - [23/Dec/2002:13:39:54 -0700] "GET /computer2G.jpg el> HTTP/1.1" 200 282132 el> 63.205.225.170 - - [23/Dec/2002:13:40:03 -0700] "GET /case.jpg HTTP/1.1" el> 200 324850 el> 63.205.225.170 - - [23/Dec/2002:13:40:11 -0700] "GET /memory.jpg el> HTTP/1.1" 200 104716 el> 63.205.225.170 - - [23/Dec/2002:13:40:15 -0700] "GET /cdrom.jpg el> HTTP/1.1" 200 209235 el> 63.205.225.170 - - [23/Dec/2002:13:40:35 -0700] "GET /harddisk.jpg el> HTTP/1.1" 200 254781 el> 63.205.225.170 - - [23/Dec/2002:13:40:36 -0700] "GET /memory.jpg el> HTTP/1.1" 200 236343 el> 63.205.225.170 - - [23/Dec/2002:13:40:46 -0700] "GET /motherboard.jpg el> HTTP/1.1" 200 406002 el> 63.205.225.170 - - [23/Dec/2002:13:40:50 -0700] "GET /monitor.jpg el> HTTP/1.1" 200 97354 el> 63.205.225.170 - - [23/Dec/2002:13:42:49 -0700] "GET /monitor.jpg el> HTTP/1.1" 200 356336 el> 64.91.61.186 - - [23/Dec/2002:13:45:52 -0700] "GET / HTTP/1.1" 200 8243 el> 64.91.61.186 - - [23/Dec/2002:13:45:53 -0700] "GET /computer2G.jpg el> HTTP/1.1" 304 - el> 64.91.61.186 - - [23/Dec/2002:13:45:53 -0700] "GET /motherboard.jpg el> HTTP/1.1" 304 - el> 64.91.61.186 - - [23/Dec/2002:13:45:54 -0700] "GET /case.jpg HTTP/1.1" 304 - el> 64.91.61.186 - - [23/Dec/2002:13:45:54 -0700] "GET /intelcpu2g.jpg el> HTTP/1.1" 304 - el> 64.91.61.186 - - [23/Dec/2002:13:45:54 -0700] "GET /cdrom.jpg HTTP/1.1" el> 304 - el> 64.91.61.186 - - [23/Dec/2002:13:45:55 -0700] "GET /memory.jpg HTTP/1.1" el> 304 - el> 64.91.61.186 - - [23/Dec/2002:13:45:59 -0700] "GET /videocard.jpg el> HTTP/1.1" 304 - el> 64.91.61.186 - - [23/Dec/2002:13:45:59 -0700] "GET /monitor.jpg el> HTTP/1.1" 304 - el> 64.91.61.186 - - [23/Dec/2002:13:46:02 -0700] "GET /harddisk.jpg el> HTTP/1.1" 304 - el> "access.log" 74L, 6232C el> -- el> error.log- el> [Mon Dec 23 13:39:08 2002] [error] [client 63.205.225.170] File does not el> exist: /var/www/case0.jpg el> [Mon Dec 23 13:39:15 2002] [error] [client 63.205.225.170] File does not el> exist: /var/www/case.jpg" el> - el> hope to see your or any advancer's help again el> thanks in advance el> Brad Lay wrote: telnet localhost 80 GET /file HTTP/1.0 (Thats ENTER, ENTER.) What happens then? Look in the access.log and error.log as well. You might want to tag a | less on the end of the telnet line, if you need to scroll. Try that and see what happens. el> -- el> Sincere Eric el> www.linuxspice.com el> linux pc for sale Check if your httpd is running type /etc/init.d/httpd start might be apache instead of httpd /etc/init.d/apache start Starting web ser
Re: not work,
Gary Turner wrote: eric lin wrote: my access log have 304 and 404 error when It try to access that http://ipath/file'> "304" is not an error. In response to a conditional GET request, Apache is saying that the document has not been changed. "404" is saying that *at the requested URL* the document was not found. Given your history, I suspect malformed URL in the anchor, or the document is differently named or located on your server. RTFM http://www.w3.org/Protocols/rfc2616-sec10.html -- gt [EMAIL PROTECTED] Nielsen's First Law of Computer Manuals: People don't read documentation voluntarily. thanks your link -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: not work,
Bill Moseley wrote: On Mon, 23 Dec 2002, David Z Maze wrote: eric lin <[EMAIL PROTECTED]> writes: www:/home/fsshl# telnet localhost 80 Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused That means your Web server isn't running. '/etc/init.d/apache start' as root; if it fails, error messages might be in /var/log/apache somewhere. [Based on your previous posts, I don't have any particular reason to believe that you have any firewalling issues at all; it's just that you tried to do some strange thing with your Web server configuration and now things don't work. Really, take other people's advice and get a basic clue before you start asking questions on strange tangents on public mailing lists.] Trolling. Eric, you are really good! Cross-posting to five lists now, maybe more. Look, linuxspice.com points to your DNS provider and they are doing lame frame-based forwarding. So you cannot use http://linuxspice.com/photo.jpg you have to use relative linkes. Did you get that? You cannot use this in your web page: http://linuxspice.com/photo.jpg";> you have to use because linuxspice.com does NOT point to your machine, it points to a machine that fowards to your machine via frames. Any link of the form http://linuxspice.com/anything will fail do to the way ItsYourDomain.com has your site setup. Get yourself a real web server on a static IP and not on a slow DSL connection, and hire a contractor. Dear Bill Thanks your replying, when I register domain, that comapany also offer free binding, so it is that regertar do the binding ip and www.mycompany.com for me. so , now I want to use http://www.mycompany.com/photo.jpg or gif"> mean I have to swich some binding to my own local machine? then what kind of setting I should do? and do I need to inform that register to do something? -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: about web link
Vineet Kumar wrote: * eric ([EMAIL PROTECTED]) [021221 18:54]: http://www.linuxspice.com/case0.jpg"; width="96" height="64"> This is WAY off topic. Here's your fish for the day: http://64.91.61.186/case.jpg"; width="96" height="64"> you are right, last email I remember I did type as what you suggest, but today I check the page source from kconquer, it have a www. before that static ip, so I took off that www, then it show my photo. Thanks a lot, please forget last wrong message. /* but if I use www.myregistereddomain.com instead of staticip, it still not work, some in the mailing list told me may be binding have problem. when I register domain, that registar also do binding for me. so I wonder that is the problem, that is I should do binding by myself in linux box. any advice? */ You had a mysterious closing tag for which there was no opening tag. This wasn't your main problem, though. The URL you were trying to reference in your img tag was no good (404 Not Found). From looking at http://www.linuxspice.com I guess you intended to use the URL given above. If you want an example of how to reference an image with an absolute URL, just look at the source of http://www.linuxspice.com/index.html, since all of their images appear to be coming from 64.91.61.186, and are all specified with absolute URLs. Here's how to fish for the future: http://mozilla.org/editor/ http://www.w3.org/MarkUp/ http://validator.w3.org/ http://www.oreillynet.com/search/index.ncsp?sp-q=html&sp-k=books&search=search http://www.w3schools.com/html/ This mailing list is intended for community support for Debian GNU/Linux. As it is extraordinarily high-traffic already, we would appreciate that everyone try to limit posts here to on-topic questions (somehow related to Debian), and take other questions to more appropriate fora. good times, Vineet -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: work but http://www.domain.com/file">not work
Bernd Eckenfels wrote: On Tue, Dec 24, 2002 at 04:51:04AM -0700, eric lin wrote: Do you know why in the html code to show photo by http://12.34.56.78/photo.gif or jpg"> work but http://www.domain.com/photo.gif or jpg"> not work? you are totally in the wrong list, but anyway: eighter www.domain.com does not resolv to 12.34.56.78 or you web server is using name based virtual hosts. The ip does match the default host, the name does match another one. If you want us to help you need to provide real address, real error messages and a description of your network. Thanks your reply, In my own site(my comuter's browser) I can see that pic even using http://www.domain.com/photo.gif";> in my /var/www/index.html but in www.finitesite.com(a free webhosting company)'s my index.html if I also put http://www.domain.com/photo.gif";> then the photo is broken when I vistie my finitesite page, www://www.finitesite.com/fsshl -but using static ip 12.34.56.78 work Do you use proxies? Firewalls? What kind of firewall? What happens if you directly type the images address (both) in your browser? both www.domain.com/photo.gif or 12.34.56.78/photo.gif in URL of any browser all work. Greetings Bernd -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: work but http://www.domain.com/file">not work
Bernd Eckenfels wrote: On Tue, Dec 24, 2002 at 05:53:29AM -0700, eric lin wrote: but in www.finitesite.com(a free webhosting company)'s my index.html if I also put http://www.domain.com/photo.gif";> then the photo is broken when I vistie my finitesite page, www://www.finitesite.com/fsshl -but using static ip 12.34.56.78 work i do not fully understand, but you can just write that only work when index.html and photo.gif in my own computer, if index.html and photo.gif are located at different place -and not use static ip but www.domain.com, it wont work my firewall related test: www:/var/log/apache# iptables -t nat -Lnv iptables: Table does not exist (do you need to insmod?) so I am very beginner to networking of linux, hope to see your advice again. this will work Greetings Bernd -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
webserver using name based virtual hosts, make problem
Dear Bernd Eckenfels or apache webserver user: On Tue, Dec 24, 2002 at 04:51:04AM -0700, eric lin wrote: >> Do you know why in the html code to show photo by >> http://12.34.56.78/photo.gif or jpg"> work but >> http://www.domain.com/photo.gif or jpg"> not work? you are totally in the wrong list, but anyway: eighter www.domain.com does not resolv to 12.34.56.78 or you web server is using name based virtual hosts. The ip does match the default host, the name does match another one. If you want us to help you need to provide real address, real error messages and a description of your network. Do you use proxies? Firewalls? What kind of firewall? What happens if you directly type the images address (both) in your browser? Greetings Bernd please help on "The ip does match the default host, but the name does match another one." I have some related lines about this in my /etc/apache/httpd.conf - # ServerName allows you to set a host name which is sent back to clients for # your server if it's different than the one the program would get (i.e. use # "www" instead of the host's real name). # # Note: You cannot just invent host names and hope they work. The name you # define here must be a valid DNS name for your host. If you don't understand # this, ask your network administrator. ServerName www.linuxspice.com # UseCanonicalName: (new for 1.3) With this setting turned on, whenever # Apache needs to construct a self-referencing URL (a url that refers back # to the server the response is coming from) it will use ServerName and # Port to form a "canonical" name. With this setting off, Apache will # use the hostname:port that the client supplied, when possible. This # also affects SERVER_NAME and SERVER_PORT in CGIs. UseCanonicalName on - MaxClients 150 # MaxRequestsPerChild: the number of requests each child process is # allowed to process before the child dies. # The child will exit so as to avoid problems after prolonged use when # Apache (and maybe the libraries it uses) leak. On most systems, this # isn't really needed, but a few (such as Solaris) do have notable leaks # in the libraries. MaxRequestsPerChild 30 # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, in addition to the default. See also the VirtualHost command #Listen 3000 Listen 64.91.61.186:80 # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. DocumentRoot /var/www - Please help again, thanks in advance -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: webserver using name based virtual hosts, make problem
Bernd Eckenfels wrote: Hello, your apache config does not contain named virtual hosts, so your problem is in the fact that the ip for: ServerName www.linuxspice.com is not Listen 64.91.61.186:80 So this means if you specify http://www.linuxspice.com/case.jpg it will not be the same as http://64.91.61.186/case.jpg, unless you are on a host which has set up this wrong name mapping, because it is http://63.85.86.80/case.jpg. Greetings Bernd so if I want that http://www.linuxspice.com/case.jpg";> showed photo in finitesite.com/fsshl I need to modify my httpd.conf # VirtualHost: Allows the daemon to respond to requests for more than one # server address, if your server machine is configured to accept IP packets # for multiple addresses. This can be accomplished with the ifconfig # alias flag, or through kernel patches like VIF. # Any httpd.conf or srm.conf directive may go into a VirtualHost command. # See also the BindAddress entry. # #ServerAdmin [EMAIL PROTECTED] #DocumentRoot /var/www/host.some_domain.com #ServerName host.some_domain.com #ErrorLog /var/log/apache/host.some_domain.com-error.log #TransferLog /var/log/apache/host.some_domain.com-access.log # -- is this part need to be modify? if so, should I do this? - DocumentRoot /var/www/ ServerNmae www.linuxspice.com --- that is in the last part of my httpd.conf please help again, thanks in advance Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: work but http://www.domain.com/file">not work
Thomas Braun wrote: eric lin wrote: Dear advancers: Do you know why in the html code to show photo by http://12.34.56.78/photo.gif or jpg"> work but http://www.domain.com/photo.gif or jpg"> not work? Do you can resolve www.domain.com on the computer? cu thomas highly appreciate your help you mean www. or static put that in URL of browser it all work, or you mean configure named or ipv6 or bind and run them? No, although in boot time I see the prompt debian or progeny make it run , so setting is default(and I do not know what kind config they are) I ever email register, but I think I had better solve it by myself in linux box. -- Sincere Eric www.linuxspice.com linux pc for sale -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
