strange problem
Hi,
I have some strange problem with my machine
It just freeze (no keybord or mouse activity, no ping reply). It happens
while I am in X.
And from time to time I get this message:
"hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }"
The system is Intel 440BX, PIII 700, radeon9000pro, Linux Kernel 2.5.63,
XFree-4.3, but I got same problems with kernel 2.4.20 and XFree-4.2
Any idea what is wrong ?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ntp problem (newbie)
Hi, I try to install and configure a ntpd on a machine I do apt-get install ntp ntpdate ntp-doc When it prompts for an ntp server to synchronize I get on already working. It asks me if I want him to overwrite ntp.conf and I say yes. All fine, ps -ax shows ntpd working but when I try to synchronize other computers they say "no server suitable for synchronization" What did I do wrong ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: how to install just one package from some other distro (likewoody)?
On Wed, 2002-10-09 at 14:08, J.S.Sahambi wrote: > Hi > I wanted to install avidemux but my "apt-cache search avidemux" did > not give me anything. My sourses.lst file is: > > deb http://202.141.80.72/debian testing main non-free contrib > deb http://202.141.80.72/debian-non-US testing/non-US main non-free contrib download package dpkg -i package.deb -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: make menuconfig
On Thu, 2002-10-10 at 19:41, Scott Henson wrote: > I recently reinstalled my debian unstable system and I wanted to compile > a new kernel, but to my suprise make menuconfig would no longer work. > It craps out with an error about not being able to find an ncurses > library. I have libncurses5-dev and all of its friends installed. > Anyone know what package Im missing to be able to use make menuconfig. U need libnucurses5-dev http://packages.debian.org/unstable/devel/kernel-source-2.4.18.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: unable to mount /cdrom
On Thu, 2002-10-31 at 12:45, Rhodri wrote: > Hi everybody, > > I just switch on the computer yesterday and I tried to mount the /cdrom > device and I couldn't. > > The error it gives me is: > "wrong fs type, bad superblock on /dev/cdrom or too many mounted > filesystems. do u have iso9660 kernel support ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Gnome freezes on initial splash screen
On Mon, 2002-11-18 at 10:11, franck routier wrote: > Hi, > > I'm using unstable and did a fresh upgrade. > > Gnome2 won't work now. When I log in from gdm, the gnome splash screen > opens, but nothing prints on the bottom of it, as it used to. It then > stays frozen forever. > > I think this is related to gconf, but I'm not sure at all... > > Where should I look to try to solve this ? Gnome2 in Sid is not starting anymore due to a bug in the latest bonobo packages. To fix, downgrade the following packages: bonobo-activation libbonobo-activation-dev libbonobo-activation4. The packages are in /var/cache/apt/archives/ or at ftp://ftp.debian.org/debian/pool/main/b/bonobo-activation/ and can be installed using dpkg -i . You may need to go down to version 1.0.3-2.2. > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: IMAP & SMTP services
On Fri, 2002-11-22 at 10:45, Veszi Gabor wrote: > Hi! > > > 1. Which packages do I need to install to get a ssl encrypted IMAP server > > running? > > I'm using Courier-IMAP and it works great for me. You'll need to > installed the courier-imap-ssl package (and it's dependiences like > courier-imap, courier-ssl,...). U need to have openssl installed on the machine so it can generate the certificate -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
jrf for debian
Hi Is there any jrf (java relational framework) package for debian ? I tried to apt-cache search jrf/java but I dind't get any answer to satisfy my needs I have deb http://www.ibiblio.org/pub/linux/devel/lang/java/blackdown.org/debian unstable main non-free in my /etc/apt/sources.list -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
apt-get problem
when I run apt-get update it says something like Reading Package Lists... Done Building Dependency Tree... Done W: Bizarre Error - File size is not what the server reported 0 84 W: Bizarre Error - File size is not what the server reported 0 88 W: You may want to run apt-get update to correct these problems what is wrong ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
mlterm problem
Hi, I installed the latest mlterm.deb from unstable and when I tried to execute it it says: mlterm: relocation error: mlterm: undefined symbol: fribidi_get_type... I tried to downgrade from unstable to testing or stable, but I still get the same error. Any idea where is the error ? Sorry if I am mailing to the wrong list! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: mlterm problem
On Lu, 2002-09-02 at 16:01, Stephen Gran wrote: > This one time, at band camp, Cristi Banciu said: > > Hi, > Right list (^8. It sounds like a problem with libfribidi0 - try > downgrading that instead. U were right... I downloaded libfribidi0 and now it is working fine Thank you -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Java-vm plugin
On Wed, 2002-09-25 at 12:56, [EMAIL PROTECTED] wrote: > > Using either galeon or mozilla a warning pops up complaining that I should install a >java-vm plugin to display some picture in a page. > What deb package should I install for java-vm support? j2re1.3 ftp.tux.org/debian woody non-free ftp://mirrors.rcn.net/pub/debian/dists/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Java-vm plugin
On Wed, 2002-09-25 at 14:42, Keith O'Connell wrote: > >>>>> "Cristi" == Cristi Banciu <[EMAIL PROTECTED]> writes: > > Cristi> j2re1.3 > > Cristi> ftp.tux.org/debian woody non-free > Cristi> ftp://mirrors.rcn.net/pub/debian/dists/ > > Neither of these (or close approximations) work in my sources.list. > Could you repost a cut from your sources.list just to clarify for us? sure #jre deb ftp://archive.logicnet.ro/mirrors/ftp.tux.org/debian woody non-free -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: What up with www.debian.org ?
On Fri, 2003-11-21 at 09:37, Raghavendra Bhat wrote: > Jerome posts: > > >> What happens to www.debian.org ? > > Someone has cracked all the servers of the Debian Project. There has > been a severe security mishap and guys should uninstall all stuff > downloaded and installed in the past 2 days. Please do not apt-get > anything right now! Please wait till an `official' release happens! is this an official position ? Are you sure that this really happens ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
www.debian.org
http://cert.uni-stuttgart.de/files/fw/debian-security-20031121.txt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: how to mount a windows 'share' under linux
will trillich wrote: we'd like to automate backups from the office windo~1 box using rsync. we can do it usnig samba and the ftp-like interface, but all timestamps are lost this way (unless there's an option we've missed). we googled for things like 'mount windows share under linux filesystem' and get .exe downloadables and tutorials on the fhs... isn't there some way to mount a windo~1 'share' as part of the linux file system so that rsync can handle the transfers? maybe there's some string of keywords to 'apt-cache search' for? if'n you could supply which M to RTF out of, it'd be muy helpful. apperciative thanks in advance. -- Their iz ate errers in these sentance. man smbount -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.289 / Virus Database: 265.4.3 - Release Date: 11/26/2004 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
apache + mass virtual hosting +tomcat please help
Hi, I have configured apache with mass virtual hosting by adding following line to apache's conf files. VirtualDocumentRoot /var/vhosts/%0/httpdocs/ and everything seems to work just fine with a little exception. Few virtual sites needs tomcat in order to work. I have installed tomcat4 and mod_jk2, but I have no idea how could I tell that www.tomcatsite.com which is /var/vhosts/www.tomcatsite.com/httpdocs is a site that requires java ? Sorry if I am confuse! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: apache + mass virtual hosting +tomcat please help
Roozemond, D.A. wrote: (although there might be a workaround with bridged networking etc). The easiest solution I see is letting tomcat run on port 81 (for instance), and tell apache to redirect any requests for http://www.tomcatsite.com/ to http://www.tomcatsite.com:81/, which tomcat will then serve (probably in a manner similar to the one you defined in apache). Yes, I run tomcat on 8080 and I am using mod_jk2 to bind tomcat with apache. I just don't know how to tell apache to call tomcat for one particular virtual host . Hope I made it somewhat clearer... Yes, you did -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
strange ps
Hi, I have a computer which behaves strange. ps doesn't show all the processes runing on the machine. For example if I have apache, mysql, qmail, tinydns running it will show only first 3 of them (or something like that). If I stop one shown process and I run ps again I will be able to see a hidden process. Then if I start again the process, let's say apache and run ps again I won't be able to see apache process, which is running just fine. The machine is running kernel 2.4. Anyone has an idea why is acting like that ? Any suggestion how could I fix it ? Thank you! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
perl program to log apache access.log with mass virtual hosting
Hi,
I am using apache with mass virtual hosting. I need to keep separate log
files for each vhosts into something like thist
/var/log/httpd/$vhost.without.www/$year/$month/$day/access.log
I have found a little perl script that says it does that. Unfortunatelly
it does not working, apache error.log saying something like this:
piped log program '/usr/local/sbin/logger' failed unexpectedly
Here is the perl script
###start program ###
#!/usr/bin/perl
#Script to pipe apache log entries to virtually hosted log files
# Assumes httpd.conf has the following:
# LogFormat "%v %h %l %u %t \"%r\" %>s %b" commonvhost
# and that ONLY the following logging line is used in the httpd.conf:
# CustomLog "| /path/to/logger.pl" commonvhost
# DO NOT configure the CustomLog directive in the vhost stubs for vhosts
# or this will not work.
# Script logs commonvhost entries to a logfile with a template of:
# /var/log/httpd/virtual.domain/$year/$month/$day
use strict;
my $logEntry = <>;
# get the vhost from this log entry:
$logEntry=~/(.*?) /;
my $vhost = $1;
my ($year, $month, $day) = (
(localtime)[5]+1900,
sprintf("%02d", (localtime)[4]+1),
sprintf("%02d", (localtime)[3])
);
# Name of access logfiles:
my $accessLogName = "vhosts_log";
my $logDir = "/var/log/httpd";
my $allLogDir = "$logDir/all/$year/$month/$day";
my $vhostLogDir = "$logDir/$vhost/$year/$month/$day";
writeLog($allLogDir, "all");
writeLog($vhostLogDir, "vhost");
# write a log entry to a file
sub writeLog(){
my $logDir = shift @_;
my $type = shift @_;
if( ! -d $logDir ) {
`mkdir -p $logDir`;
}
open(FD, ">>$logDir/$accessLogName");
# if type is vhost, strip off the vhost data:
if($type eq "vhost"){
$logEntry =~s/.*? //;
}
print FD $logEntry;
close FD;
}
###end program ###
Can anyone tell me what have I done wrong ?
Thank you very much!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: USB 2.0 speed
Alexandros Papadopoulos wrote: I have an external HDD case, that is USB 2.0 certified. When I boot my machine with KNOPPIX and have the USB case plugged, I get fast transfer rates to my external disk (10MB/sec or so). When I boot my regual installation of Debian (sarge), with both kernels 2.4.25 and 2.6.8 (installed via apt-get), the same modules are loaded (uhci-hcd and friends), but the system can only exchange data with the external drive VERY slowly (less than 500kb/sec). usbview shows me at that time that the external USB device (correctly) advertises speeds of up to 480Mbps, but actual file transfers are extremely slow. Anyone have any idea on how to troubleshoot this? Try to load ehci modules. I have an usb-stick and if I mount it with -o sync option I am able to transfer data at about 5Mb/sec, which is pretty good for a flash drive. I am using kernel 2.6.8 installed with apt-get. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
awstats with mass virtual hosting
Hi, I have a machine with a lot of virtual hosts. For that I am using apache with mass virtual hosting. Now I have to run awstats on each single virtual host. I was curious what is the beste metod to do that ? As far as I read I have to have one conf for each virtual host. I was curios how is it better for awstats ? To have one big log file, each line containing the virtual host, or to have one log file for each virtual host ? Any suggestions, idea, etc. how to do that will be apreciate. I must say I never used awstats before. Thank you very much. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Migrating from qmail: which MTA?
David Garamond wrote: David Garamond wrote: We are planning to migrate a bunch of hosting servers from RH73 + qmail + vmailmgr to Sarge and I'd appreciate on the comments of the choice of MTA to use. Oh, I should add that I'm pretty clueless when it comes to other MTAs. I've used qmail ever since I've used Linux (around RH5-RH6). I'm not even familiar with Sendmail. Most of my friends are pushing for Postfix, but I see that Debian's default is exim, and I myself have been using courier-imap so currently I'm thinking courier would be the easiest migration route. Regards, dave And why don't u use qmail ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Migrating from qmail: which MTA?
robin wrote: Looking via synaptic: qmail-src Source only package for building qmail binary package qmail is a secure Secure, reliable, efficient, simple mail transport system. Or you can use precompiled binary packages http://smarden.org/pape/Debian/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Harddisk not recognized
Nicos Gollan wrote: On Sun, 16 May 2004 13:44:48 +0200 "Christian Christmann" <[EMAIL PROTECTED]> wrote: the BIOS if my motherboard doesn't recognize my new 160GB harddisk correctly. I'd like to boot from this device. Is there a way to overcome this problem with lilo etc. ? No, just try to upgrade your bios. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: D-I to SATA (hda) but move to 2.6 kernel (sda) fails
Graham Williams wrote: The current beta 4 debian-installer will install to SATA okay, but treats the disk as IDE (/dev/hda). In moving to kernel 2.6.6 from sid this uses SCSI (/dev/sda) and the reboot fails. Is there a migration path one needs to follow? You have to edit and modify /etc/fstab and /etc/lilo.conf or /boot/grub.menu.lst. Regards, Graham -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: grub fails
Johann Spies wrote: I have a fairly new PC with the following hardware: messages like "Loading stage1.5" on the screen. Did you edit /boot/grub/menu.lst according to your kernel ? Does anyone know about a possible incompatibility between grub and this hardware? No, I have the same hardware and it is working fine with grub. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: ATI radeon 8500 no dri
Manu wrote: Thanks for your response and sorry for the big attachment. I have tried the one from ATI and it is not working U should try this: http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
dhcp problem
Hi, I have a network with computers with dual boot (linux and windows). They get ip from a debian dhcp3 server. When a client boot the machine in windows he gets ip A, and when the same client boots the machine in linux gets ip A+1. How could I make it receive the same ip, no matter what OS the machine boots. In linux I edited /etc/dhclient-eth0.conf and I put send client-host-name and send dhcp-client-identifier. I know I could simply solve the problem by bonding ip with mac, but I don't want to do that. I need dinamicaly assigned address, not static. Thank you very much! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: dhcp problem
On Wed, 2004-06-09 at 12:37, Diego MartÃnez CastaÃeda wrote: > you'll always get differents ip's if you don't assign a determinate ip > address to an MAC address. The rest of your pool of ip addresses will be > assigned dinamicaly. so , you wanna tell me that I have no choice but to assign ip static based on mac ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: dhcp problem [SOLVED]
On Wed, 2004-06-09 at 12:21, Cristi Banciu wrote: > Hi, > > I have a network with computers with dual boot (linux and windows). They > get ip from a debian dhcp3 server. When a client boot the machine in > windows he gets ip A, and when the same client boots the machine in > linux gets ip A+1. How could I make it receive the same ip, no matter > what OS the machine boots. In linux I edited /etc/dhclient-eth0.conf and > I put send client-host-name and send dhcp-client-identifier. > I know I could simply solve the problem by bonding ip with mac, but I > don't want to do that. I need dinamicaly assigned address, not static. Using dhcpcd instead of dhclient will solve the problem. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
kde removes on dselect-upgrade
Hi, I am running sid and when I perform an apt-get dselect-upgrade it wants to remove kde. Reading Package Lists... Done Building Dependency Tree... Done The following packages will be REMOVED: (14 or more lines of packages to be removed) 1 packages upgraded, 0 newly installed, 247 to remove and 3 not upgraded. If I try something like apt-get install samba I got the following: The following packages have unmet dependencies: samba: Depends: libcupsys2-gnutls10 (>= 1.1.20final-1) but it is not going to be installed E: Broken packages I searched on bts and I found this: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=250921 , but I still have no idea how I could fix the problem. So any hints will be welocome. Thank you -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: kde removes on dselect-upgrade
On Tue, 2004-06-15 at 12:33, richard lyons wrote: > I thought that was all in the past (as of a week ago). Have you done > an 'apt-get update' lately? yes, I did and still same error. What repository do you use? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
problems installing evolution on debian/sid
Hi, when I try to install evolution I got the following errors. I am running debian sid. Any idea what is wrong and how could I fix it ? Thank you! #cat /etc/apt/sources.list deb http://ftp.de.debian.org/debian sid main contrib non-free deb http://ftp.de.debian.org/debian-non-US/ sid/non-US main contrib non-free #apt-get install evolution Reading Package Lists... Done Building Dependency Tree... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation: The following packages have unmet dependencies: evolution: Depends: gtkhtml3.0 (>= 3.0.10) but it is not going to be installed Depends: libbonoboui2-0 (>= 2.5.4) but it is not going to be installed Depends: libgal2.0-6 (>= 1.99.11) but it is not going to be installed Depends: libgnome-pilot2 (>= 2.0.2) but it is not going to be installed Depends: libgnome2-0 (>= 2.6.1.1) but it is not going to be installed Depends: libgnomeui-0 (>= 2.6.0) but it is not going to be installed Depends: libgnutls11 (>= 1.0.16) but it is not going to be installed Depends: libgtkhtml3.0-4 (>= 3.0.10) but it is not going to be installed Depends: libsoup2.0-0 (>= 1.99.28) but it is not going to be installed Depends: libtasn1-2 (>= 0.2.8) but 0.2.7-2 is to be installed Depends: libgal2.0-common (>= 1.99.11) but it is not going to be installed E: Broken packages -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: 8139too
[EMAIL PROTECTED] wrote: Hi all, I'm trying to install a DLink DFE-530 TX (Rev-C1) PCI NIC Card on a Woody (tried with 2.4.18 kernel), which seems to work with 8139too module (according try via-rhine module. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: choise of HDD
Pim Bliek wrote: Hiya all, I am in the market for a new HDD for my Debian (Sarge) Desktop. I have an NForce2 ASUS A7N8X Deluxe 2.0 motherboard with 2 PATA connectors and 2 SATA ones. I guess I prefer SATA because.. well, it's the future :). Any suggestions? I am looking for something fast, in the range of 80-160 GB, dependant on price. Price should be in range of 80 - 120 euros, in the Netherlands. I don't live in the Netherlands, so I can't help you with the prices. But I suggest to buy a Seagate SATA disk. As far as I know only Seagate has native SATA, the others do a bridge between PATA and SATA. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Monitoring debian server
On Fri, 2004-05-07 at 18:50, El pichichi wrote: > Hi all, > > I'm currently trying to monitor my home debian server. > > I would like to find a way to supervise the processes (for example, if > a process uses more than 85 % of the CPU, I receive an e-mail which > indicates me the process). Try nagios. http;//www.nagios.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
locales error when performing apt-get install
Hi, Every time when I try an apt-get install anything I got the following error: Setting up locales (2.3.2.ds1-12) ... Generating locales... en_US.ISO-8859-1... done en_US.ISO-8859-15... done en_US.UTF-8... done ro_RO.UTF-8...LC_ADDRESS: `country_ab3' value does not match `country_num' value dpkg: error processing locales (--configure): subprocess post-installation script returned error exit status 1 Any idea how could I fix this problem ? I tried dpkg-reconfigure locales without success. I am using debian/sid Thank you very much! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
