Re: debian-alsa bug?
Wendy Leigh Vandoolaeghe a écrit : Hi i'm trying to use alsa (alsa - alsa-base package) as my sound driver on a Dell Inspiron 8600, but nothing works. I've even compiled a new kernel 2.6.9, hoping that it would mysteriously fix the bug. When i run alsaconf it seems to be just fine, but i don't get any sound from any sound applications. And if I run /etc/init.d/alsa start, then it says it can't find any sound cards. (below is all the detail) anyone have a clue what i could do to fix the problem? Several persons with Dell computer (and I), had this problem and solved it by adding 'pci=noacpi' to the kernel at the (LILO|GRUB) prompt. Perhaps it will work for you too. hth -- Michel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: help install toshiba satellite 2435/S255
Matt Wesley a écrit: Dear all, I am trying to install a dual partition with linux and xp on my recently bought toshiba satellita 2435/S255, 2.4P4, 512. I have unsuccessfully tried to boot red hat and knoppix (they both die very early on in the process). All attempts to fiddle around with options for these two systems have failed too. Did you try to use the nopcmcia option with knoppix. With my Dell Latitude I had some troubles with this, but when I installed Debian, the PCMCIA worked fine. -- Michel
Re: inspiron 7500 - shutdown pblm
> -- Initial message --- > > From: <[EMAIL PROTECTED]> > To : > Cc : > Date: Tue, 24 Sep 2002 21:01:08 +0200 > Subject : inspiron 7500 - shutdown pblm > > > > hi > > i have an inspiron 7500 running a sarge with kernel 2.4.19 > when i do a poweroff ... it's doing "init 0" and then i have the last line : "Power Down." > i have to press the button power for shutting it down ... > normally the puter should turn off itself ... > i tried many options for this shutdown pblm to be solved ... but no way :/ > > if someone is using a 2.4.19 on an inspiron 7500 could u send me the kernel config file plz ? Did you load the power management module ? It will solve your pb. > > thks ! > -- EXCEPTIONNEL! Tiscali lance les forfaits Internet Illimités, à partir de 15,95EUR / mois. Pour en profiter,cliquez ici: http://register.tiscali.fr/forfaits/ Offres soumises à conditions.
Re: inspiron 7500 - shutdown pblm
> -- Initial message --- > > From: <[EMAIL PROTECTED]> > To : <[EMAIL PROTECTED]> > Cc : > Date: Tue, 24 Sep 2002 21:01:08 +0200 > Subject : inspiron 7500 - shutdown pblm > > > > hi > > i have an inspiron 7500 running a sarge with kernel 2.4.19 > when i do a poweroff ... it's doing "init 0" and then i have the last line : "Power Down." > i have to press the button power for shutting it down ... > normally the puter should turn off itself ... > i tried many options for this shutdown pblm to be solved ... but no way :/ > > if someone is using a 2.4.19 on an inspiron 7500 could u send me the kernel config file plz ? Did you load the power management module ? It will solve your pb. > > thks ! > -- EXCEPTIONNEL! Tiscali lance les forfaits Internet Illimités, à partir de 15,95EUR / mois. Pour en profiter,cliquez ici: http://register.tiscali.fr/forfaits/ Offres soumises à conditions. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: help install toshiba satellite 2435/S255
Matt Wesley a écrit: Dear all, I am trying to install a dual partition with linux and xp on my recently bought toshiba satellita 2435/S255, 2.4P4, 512. I have unsuccessfully tried to boot red hat and knoppix (they both die very early on in the process). All attempts to fiddle around with options for these two systems have failed too. Did you try to use the nopcmcia option with knoppix. With my Dell Latitude I had some troubles with this, but when I installed Debian, the PCMCIA worked fine. -- Michel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Acer Travelmate 290 & Standby/Suspend to disk ?
Sebastian Bleikamp a écrit : Hello, my name is Sebastian and I am new to this list. Since yesterday I am the proud owner of a Acer Travelmate 291LCi-M10. I installed Debian on it, and although I had informed myself prior at tuxmobile.org, I was surprised that nearly everything worked right out of the box. I had to install several "external" modules by myself, namely ndiswrapper (for Intel 2100 W-Lan) and sl-modem (for build in software modem). , but even that worked without any problems. The only things that didn´ t work out of the box are the accelerated ati drivers for the Ati Mobility 9600 M10 (RV350) and the standby/suspend/hibernate modes. And thats why I´m writing in here now. I tried most drivers on the web, namely the ati/radeon drivers shipped with the debian XFree86 4.3.0 packages, the ones from the ATI Homepage (fglx or s.th. like that) and the DRI development drivers. Each of them worked, but none of them made the 3d acceleration work. (I did this on several desktop PCs alredy, so I know the procedure.) Tuxracer and glxgears run at the same fps. But therefore (if using non-std. drivers) the tv-out and crt-out didn´ t work anymore, or the test mode console stopped working. And the suspend states don´t work although, even the normal ones (S1) don´ t do. The laptop enters sleep mode, but isn´ t able to resume. It stops after the framebuffer message in the reactivation process and hangs. hibernation even didn´ t start. Btw, did I mention I tried both kernels 2.6 and 2.4 ? Well, since 2.6 works better with anything else, I will stick to that. Well, I hope anyone reads this and can help me. Any help or comment is very welcome. With best regards, Sebastian Hello, I'll just try to you about ati problem. I had a similar problem, and solved it by : 1 - adding the AGP module specific to my computer. lspci | grep -i agp On my computer it prints '00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)' Then use modconf to insert the corresponding module (intel_agp for me) You now will have agpgart and the specific module shown by lsmod. 2 - You will have to un/reload the radeon module for it use the agp module 3 - Restart X, and it should be OK HTH. Regards, -- Michel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: wireless / iwconfig
[EMAIL PROTECTED] a écrit : Hello too, Im running Debian 3.0r2 kernel 2.6.5 and i cant find the command iwconfig... i compilled the kernel with all modules u can imagine and i downloaded a lot of pgks but i cant find it... if someonw can tell me... thanks. =) This command is in the package wireless-tools. cheers Cheers. -- Michel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Acer Travelmate 290 & Standby/Suspend to disk ?
Sebastian Bleikamp a écrit : Hello, my name is Sebastian and I am new to this list. Since yesterday I am the proud owner of a Acer Travelmate 291LCi-M10. I installed Debian on it, and although I had informed myself prior at tuxmobile.org, I was surprised that nearly everything worked right out of the box. I had to install several "external" modules by myself, namely ndiswrapper (for Intel 2100 W-Lan) and sl-modem (for build in software modem). , but even that worked without any problems. The only things that didn´ t work out of the box are the accelerated ati drivers for the Ati Mobility 9600 M10 (RV350) and the standby/suspend/hibernate modes. And thats why I´m writing in here now. I tried most drivers on the web, namely the ati/radeon drivers shipped with the debian XFree86 4.3.0 packages, the ones from the ATI Homepage (fglx or s.th. like that) and the DRI development drivers. Each of them worked, but none of them made the 3d acceleration work. (I did this on several desktop PCs alredy, so I know the procedure.) Tuxracer and glxgears run at the same fps. But therefore (if using non-std. drivers) the tv-out and crt-out didn´ t work anymore, or the test mode console stopped working. And the suspend states don´t work although, even the normal ones (S1) don´ t do. The laptop enters sleep mode, but isn´ t able to resume. It stops after the framebuffer message in the reactivation process and hangs. hibernation even didn´ t start. Btw, did I mention I tried both kernels 2.6 and 2.4 ? Well, since 2.6 works better with anything else, I will stick to that. Well, I hope anyone reads this and can help me. Any help or comment is very welcome. With best regards, Sebastian Hello, I'll just try to you about ati problem. I had a similar problem, and solved it by : 1 - adding the AGP module specific to my computer. lspci | grep -i agp On my computer it prints '00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)' Then use modconf to insert the corresponding module (intel_agp for me) You now will have agpgart and the specific module shown by lsmod. 2 - You will have to un/reload the radeon module for it use the agp module 3 - Restart X, and it should be OK HTH. Regards, -- Michel
Re: wireless / iwconfig
[EMAIL PROTECTED] a écrit : Hello too, Im running Debian 3.0r2 kernel 2.6.5 and i cant find the command iwconfig... i compilled the kernel with all modules u can imagine and i downloaded a lot of pgks but i cant find it... if someonw can tell me... thanks. =) This command is in the package wireless-tools. cheers Cheers. -- Michel
