atheros and pcmcia: card is not recognized
Hello, I bought a Netgear WG511U which is supported by the madwifi-driver. I created a file /etc/pcmcia/atheros.conf which is included by /etc/pcmcia/config: device "atheros" class "network" module "ath_pci" card "Atheros WiFi Card" manfid 0x0271, 0x0012 bind "atheros" But if I insert the card or restart the pcmcia-services, the card gets not recognized. When I load manually the ath_pci-module, the card works well. cardctl ident says: Socket 0: product info: "Atheros Communications, Inc.", "AR5001--", "Wireless LAN Reference Card", "00" manfid: 0x0271, 0x0012 function: 6 (network) Socket 1: no product info available any ideas? TIA bjo -- ICQ# 12220433 | bjo.nord-west.org | zeit-geist.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ESS ES1869 + X on Siemens Mobile 501 -> freeze
Hi, I tried to get sarge work on my Siemens Mobile 501, a laptop with a PII 266, 96MB RAM, 4 GB harddrive, ESS 1869-soundchip and Neomagic NM2160 graphics-chipset. After some troubles (the sb.o- module of bf24, 2.4.20-686 etc. only accept irq 7) I got the soundchip working, it plays fine with mpg123 at the console. But when I start X while mpg123 playing, the system freezes and can only be resetted by pulling the accu out and plugging the ac/dc-adaptor out. The same thing happens when I use the alsa-modules (which accept also irq 5) and when I try to use XMMS under X. On http://tuxmobil.de/siemens.html someone got this soundchip work on a 510 which seem to be nearly the same notebook. Does someone of you have some ideas or got a similar hardware constellation to work? I only found a user with the same problem after some googling. thanks bjo -- ICQ# 12220433 | http://www.thebjo.net | Was wissen die Armen, denen nie ein Blau aufging am Ziel ihres Herzens oder am Weg ihres Traums in der Nacht. Oder die Enthimmelten, die Frühblauberaubten. |E. Lasker-Schüler|
ESS ES1869 + X on Siemens Mobile 501 -> freeze
Hi, I tried to get sarge work on my Siemens Mobile 501, a laptop with a PII 266, 96MB RAM, 4 GB harddrive, ESS 1869-soundchip and Neomagic NM2160 graphics-chipset. After some troubles (the sb.o- module of bf24, 2.4.20-686 etc. only accept irq 7) I got the soundchip working, it plays fine with mpg123 at the console. But when I start X while mpg123 playing, the system freezes and can only be resetted by pulling the accu out and plugging the ac/dc-adaptor out. The same thing happens when I use the alsa-modules (which accept also irq 5) and when I try to use XMMS under X. On http://tuxmobil.de/siemens.html someone got this soundchip work on a 510 which seem to be nearly the same notebook. Does someone of you have some ideas or got a similar hardware constellation to work? I only found a user with the same problem after some googling. thanks bjo
Re: ESS ES1869 + X on Siemens Mobile 501 -> freeze
Bernhard Kleine <[EMAIL PROTECTED]> wrote: >i have a similar soundchip and use the sb.o module. When i ran >sndconfig, it asked for the IRQ and i sayed 5. Now I have an error >message on my display during boot time, but the sound works perfectly >under X. What error-message? Does it run on the same IRQ as lp0? bjo -- ICQ# 12220433 | http://www.thebjo.net | Was wissen die Armen, denen nie ein Blau aufging am Ziel ihres Herzens oder am Weg ihres Traums in der Nacht. Oder die Enthimmelten, die Frühblauberaubten. |E. Lasker-Schüler|
Re: ESS ES1869 + X on Siemens Mobile 501 -> freeze
Bernhard Kleine <[EMAIL PROTECTED]> wrote: >> >> What error-message? Does it run on the same IRQ as lp0? >> >sb: Interrupt test on IRQ7 failes - Probable IRQ conflict > >-- probably not, but I am not shure, on the laptop CUPS has not been >tested since the sound started to work When I set the sound-IRQ to 5, I also get this error message and when I play something the output is interrupted and the kernel reports some IRQ-conflicts. If I set the sound-IRQ to 7 and lp0 to 5, the soundcard is detected correctly. But in both cases X freezes bjo -- ICQ# 12220433 | http://www.thebjo.net | Was wissen die Armen, denen nie ein Blau aufging am Ziel ihres Herzens oder am Weg ihres Traums in der Nacht. Oder die Enthimmelten, die Frühblauberaubten. |E. Lasker-Schüler|
ESS ES1869 + X on Siemens Mobile 501 -> freeze
Hi, I tried to get sarge work on my Siemens Mobile 501, a laptop with a PII 266, 96MB RAM, 4 GB harddrive, ESS 1869-soundchip and Neomagic NM2160 graphics-chipset. After some troubles (the sb.o- module of bf24, 2.4.20-686 etc. only accept irq 7) I got the soundchip working, it plays fine with mpg123 at the console. But when I start X while mpg123 playing, the system freezes and can only be resetted by pulling the accu out and plugging the ac/dc-adaptor out. The same thing happens when I use the alsa-modules (which accept also irq 5) and when I try to use XMMS under X. On http://tuxmobil.de/siemens.html someone got this soundchip work on a 510 which seem to be nearly the same notebook. Does someone of you have some ideas or got a similar hardware constellation to work? I only found a user with the same problem after some googling. thanks bjo -- ICQ# 12220433 | http://www.thebjo.net | Was wissen die Armen, denen nie ein Blau aufging am Ziel ihres Herzens oder am Weg ihres Traums in der Nacht. Oder die Enthimmelten, die Frühblauberaubten. |E. Lasker-Schüler| -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ESS ES1869 + X on Siemens Mobile 501 -> freeze
Hi, I tried to get sarge work on my Siemens Mobile 501, a laptop with a PII 266, 96MB RAM, 4 GB harddrive, ESS 1869-soundchip and Neomagic NM2160 graphics-chipset. After some troubles (the sb.o- module of bf24, 2.4.20-686 etc. only accept irq 7) I got the soundchip working, it plays fine with mpg123 at the console. But when I start X while mpg123 playing, the system freezes and can only be resetted by pulling the accu out and plugging the ac/dc-adaptor out. The same thing happens when I use the alsa-modules (which accept also irq 5) and when I try to use XMMS under X. On http://tuxmobil.de/siemens.html someone got this soundchip work on a 510 which seem to be nearly the same notebook. Does someone of you have some ideas or got a similar hardware constellation to work? I only found a user with the same problem after some googling. thanks bjo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: ESS ES1869 + X on Siemens Mobile 501 -> freeze
Bernhard Kleine <[EMAIL PROTECTED]> wrote: >i have a similar soundchip and use the sb.o module. When i ran >sndconfig, it asked for the IRQ and i sayed 5. Now I have an error >message on my display during boot time, but the sound works perfectly >under X. What error-message? Does it run on the same IRQ as lp0? bjo -- ICQ# 12220433 | http://www.thebjo.net | Was wissen die Armen, denen nie ein Blau aufging am Ziel ihres Herzens oder am Weg ihres Traums in der Nacht. Oder die Enthimmelten, die Frühblauberaubten. |E. Lasker-Schüler| -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: ESS ES1869 + X on Siemens Mobile 501 -> freeze
Bernhard Kleine <[EMAIL PROTECTED]> wrote: >> >> What error-message? Does it run on the same IRQ as lp0? >> >sb: Interrupt test on IRQ7 failes - Probable IRQ conflict > >-- probably not, but I am not shure, on the laptop CUPS has not been >tested since the sound started to work When I set the sound-IRQ to 5, I also get this error message and when I play something the output is interrupted and the kernel reports some IRQ-conflicts. If I set the sound-IRQ to 7 and lp0 to 5, the soundcard is detected correctly. But in both cases X freezes bjo -- ICQ# 12220433 | http://www.thebjo.net | Was wissen die Armen, denen nie ein Blau aufging am Ziel ihres Herzens oder am Weg ihres Traums in der Nacht. Oder die Enthimmelten, die Frühblauberaubten. |E. Lasker-Schüler| -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: YMH0800 (opl3sa2 module) causes laptop freeze
Vampie Mann <[EMAIL PROTECTED]> wrote: >The Yamaha OPL-SA2 is causing system lockup after a >few seconds of play. there are no errors in >/proc/interupts or /proc/ioports and the card is on a >ISA bus so i pnpdump and there is Nothing >UN-commented, i need help geting this done. i bought >this laptop for MP3 and WiFi >it is an Acer Extensa 367D. Linux-Wlan-ng was no >trouble and the Kernel recompile was simple. damn this >problem What mp3player do you use? Some month ago I posted about trouble playing sound while running Xwindows with a ESS1869chip on a Siemens Mobile 501. Then someone told me that sound works with Mandrake 8.0. I found out that mdk 8.0 uses a 2.4.3 kernel and an old Xwindows. So I installed Xwindows 3.x under sarge and now sound works. Perhaps there is also a conflict between the xserver and your soundchip hth bjo -- ICQ# 12220433 | http://www.thebjo.net | "Und dann kommt am Bahnhof das Personal mit dem Wasserschlauch für das Bordrestaurant und dem RJ45-Kabel für den Newsserver?" | A.Krey in d.e.b.t+s | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: wireless configuration
Hi, Xavier Maillard <[EMAIL PROTECTED]> wrote: >> I have a Linksys WPC11 v3 wireless card. It works with the orinico_cs > >I have the same Wireless card here but I just could not figure out how >to make the orinoco_cs working for me. What did you do ? I mean which >kernel version, what 3rd party tools did you need, etc... Are you sure that you do not have v4 with the Realtek 8180 crap? bjo -- ICQ# 12220433 | http://www.thebjo.net | Das Internet spiegelt nur die Realität, im Gegensatz zum Fernsehen, die verdienen Geld mit falscher Realität. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: YMH0800 (opl3sa2 module) causes laptop freeze
Vampie Mann <[EMAIL PROTECTED]> wrote: >The Yamaha OPL-SA2 is causing system lockup after a >few seconds of play. there are no errors in >/proc/interupts or /proc/ioports and the card is on a >ISA bus so i pnpdump and there is Nothing >UN-commented, i need help geting this done. i bought >this laptop for MP3 and WiFi >it is an Acer Extensa 367D. Linux-Wlan-ng was no >trouble and the Kernel recompile was simple. damn this >problem What mp3player do you use? Some month ago I posted about trouble playing sound while running Xwindows with a ESS1869chip on a Siemens Mobile 501. Then someone told me that sound works with Mandrake 8.0. I found out that mdk 8.0 uses a 2.4.3 kernel and an old Xwindows. So I installed Xwindows 3.x under sarge and now sound works. Perhaps there is also a conflict between the xserver and your soundchip hth bjo -- ICQ# 12220433 | http://www.thebjo.net | "Und dann kommt am Bahnhof das Personal mit dem Wasserschlauch für das Bordrestaurant und dem RJ45-Kabel für den Newsserver?" | A.Krey in d.e.b.t+s |
Re: wireless configuration
Hi, Xavier Maillard <[EMAIL PROTECTED]> wrote: >> I have a Linksys WPC11 v3 wireless card. It works with the orinico_cs > >I have the same Wireless card here but I just could not figure out how >to make the orinoco_cs working for me. What did you do ? I mean which >kernel version, what 3rd party tools did you need, etc... Are you sure that you do not have v4 with the Realtek 8180 crap? bjo -- ICQ# 12220433 | http://www.thebjo.net | Das Internet spiegelt nur die Realität, im Gegensatz zum Fernsehen, die verdienen Geld mit falscher Realität.
