Bug#573737: ITP: grilo -- framework for media discovery and browsing

[Alberto Garcia]

On Tue, Jun 07, 2011 at 01:16:34PM +0200, Andreas Henriksson wrote:

> I suggest putting it in experimental for now No guarantees
> there, and people who want to test it can easily install it. :)

Makes sense, I think I'll do that.

Berto



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#610888: libpam-ldap: allow any LDAP users even when pam_check_host_attr

[Steve Langasek]

merge 610888 543483
thanks

Hi there,

On Sun, Jan 23, 2011 at 08:17:03PM +0100, Luca Capello wrote:
> On sid, however, while I was quite happy than I had nothing to touch to
> have LDAP authentication working automatically by default, the
> libpam-ldap's pam_check_host_attr seems to not work at all:
> --8<---cut here---start->8--- #
> /etc/pam.d/common-account - authorization settings common to all
> services
> 
> # here are the per-package modules (the "Primary" block)
> account   [success=2 new_authtok_reqd=done default=ignore]
> pam_unix.so 
> account   [success=1 default=ignore]  pam_ldap.so 
> # here's the fallback if no module succeeds
> account   requisite   pam_deny.so
> # prime the stack with a positive return value if there isn't one already;
> # this avoids us returning an error just because nothing sets a success code
> # since the modules above will each just jump around
> account   requiredpam_permit.so
> # and here are more per-package modules (the "Additional" block)
> # end of pam-auth-update config
> --8<---cut here---end--->8---

> I read the PAM documentation, but I still do not understand what is
> wrong with the default configuration.  Could this be related to
> ?  I guess so, given that libpam-ldapd's
> pam.d/common-account configuration works as expected, with the big
> difference being that the pam_ldap's profile is Additional and not
> Primary:

I think this is the same as bug #583483; merging.

While I'm still weighing whether to change pam_unix for bug #583492, it is
definitely the case that pam_ldap's authorization checks should be
'Additional' and not 'Primary' because, as seen here, they are intended to
always be applied *in addition* to any authorization checks from other
modules.

-- 
Steve Langasek   Give me a lever long enough and a Free OS
Debian Developer   to set it on, and I can move the world.
Ubuntu Developerhttp://www.debian.org/
slanga...@ubuntu.com vor...@debian.org


signature.asc
Description: Digital signature

Bug#626682: Side effects are not limited to sylog messages...

[Stefan Ring]

On Fri, Jun 3, 2011 at 5:44 PM, Stefan Ring  wrote:
>> Which might hit the same kinda path in the server as fbdev, OK (the
>> original issue seemed to happen with fbdev only, didn't see any other
>> complaints for other drivers until now).
>
> See https://bugzilla.redhat.com/show_bug.cgi?id=665320 for a few
> complaints with all kinds of drivers.

There’s another one: http://www.virtualbox.org/ticket/8909



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629619: VLC cannot be selected as the default video player in GNOME 3

[Maia Kozheva]

Package: vlc
Version: 1.1.9-1

In the "System Info" applet for the GNOME 3 Control Center, VLC is not 
available as a selection for the default video player setting.

Also reported in Ubuntu:

https://bugs.launchpad.net/ubuntu/+source/vlc/+bug/793334


signature.asc
Description: This is a digitally signed message part.

Bug#629620: please provide configuration include mechanism (e.g. /etc/tmux.conf.d/)

[Daniel Baumann]

Package: tmux
Severity: wishlist
Tags: upstream

Hi,

it would be nice if tmux would support including other configuration
files, either via an include statement in /etc/tmux.conf, or better,
automatically read all files in /etc/tmux.conf.d/, if existing (same for
~/.tmux.conf resp. ~/.tmux.conf.d/).

Regards,
Daniel

-- 
Address:Daniel Baumann, Donnerbuehlweg 3, CH-3012 Bern
Email:  daniel.baum...@progress-technologies.net
Internet:   http://people.progress-technologies.net/~daniel.baumann/



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629621: maven-debian-helper: --usj-name does not get used from debian/xxx.poms file

[James Page]

Package: maven-debian-helper
Version: 1.4.2
Severity: normal


I want to be able to specify a different /usr/share/java 
base name for JAR files; --usj-name in the debian/xxx.poms 
file looks like it does the job but when the library is 
installed it ignores this setting.

This is a outside use-case but does effect some packages 
I'm currently working on.

I'm working around this issue by using 

DEB_MAVEN_INSTALL_TO_USJ := false

And re-installing the JARs using tailored mh_installjar
commands in debian/rules

Cheers

James


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.38-8-generic (SMP w/8 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash

Versions of packages maven-debian-helper depends on:
ii  default-jdk   1:1.6-40   Standard Java or Java compatible D
ii  libmaven-clean-plugin-java2.3-3  Maven clean plugin
ii  libmaven-compiler-plugin-java 2.0.2-4Maven compiler plugin
ii  libmaven-jar-plugin-java  2.2-4  Maven Jar plugin
ii  libmaven-resources-plugin-jav 2.3-5  Maven resources plugin
ii  libmaven-site-plugin-java 2.1-1  Maven Site Plugin for generating a
ii  libplexus-velocity-java   1.1.7-3Plexus component interface to velo
ii  libsurefire-java  2.4.3-3Surefire test framework for Java
ii  maven-repo-helper 1.5.1  Helper tools for including Maven m
ii  maven22.2.1-5Java software project management a
ii  velocity  1.6.2-4Java-based template engine for web

Versions of packages maven-debian-helper recommends:
ii  apt-file2.4.2search for files within Debian pac
ii  devscripts  2.11.0   scripts to make the life of a Debi
ii  subversion  1.6.17dfsg-1 Advanced version control system

Versions of packages maven-debian-helper suggests:
pn  libmaven-javadoc-plugin-java   (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629622: ITP: jenkins-htmlunit-core-js -- Jenkins branch of the HtmlUnit Core JS Interpreter

[James Page]

Package: wnpp
Severity: wishlist
Owner: James Page 


* Package name: jenkins-htmlunit-core-js
  Version : 2.6-hudson-1
* URL : http://github.com/jenkinsci/core-js
* License : MPL-1.1 or GPL-2 (+ misc others)
  Programming Lang: Java
  Description : Jenkins branch of the HtmlUnit Core JS Interpreter

 HtmlUnit is a "GUI-Less browser for Java programs". It models HTML
 documents and provides an API that allows you to invoke pages,
 fill out forms, click links, etc... just like you do in your "normal"
 browser.
 .
 This package contains the Jenkins branch of the HtmlUnit adaptation
 of Mozilla Rhino Javascript engine for Java with supports HtmlUnit.
 .
 HtmlUnit Changes are documented by a diff (rhinoDiff.txt) contained
 in the generated jar files.

 This package is required to support packaging of jenkins and is one
 of a number of branches that the jenkinsci project maintains.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#607965: check sources

[Johannes Storm]

aquaria:  can't find. links death.
gish: seems all free [1]
lugaru:   unfree data files required (only non commercial)
penumbra: seems all free [2]

[1] https://github.com/blinry/gish
[2]
https://github.com/FrictionalGames/PenumbraOverture/tree/6a6953a9e02a6b0c152f3de78b2dc9b3a28948dc/PenumbraOverture.xcodeproj


-- 
email:   jo-mas...@gmx.de
PGP key-id:  2AE94C30
fingerprint: CB17 E5C2 F8AB EC66 552E C858 E8D9 6ADF 2AE9 4C30


signature.asc
Description: This is a digitally signed message part

Bug#628952: minidlna: Possible unknown copyright status of hardcoded image blobs in source code

[Carl Fürstenberg]

On Mon, Jun 6, 2011 at 19:20, Bernhard R. Link  wrote:
> * Benoīt Knecht  [110606 11:57]:
>> I had a look at these, and I'm pretty sure they're not eligible for
>> copyright protection (a white 'N' on a blue background is not nearly
>> creative enough). So I don't think there's a problem there; the license
>> header should just be corrected to state that there's no copyright on
>> this particular logo. What do you think?
>
> Removing the copyright notice is extremly dangerous. It's the only thing
> universally forbidden even before the copyright-mafia successfully lobbied
> for more in many countries.
>
> So ideally the copyright holder would have to do it (or at least the one
> having written the copyright notice), but then it is easier to just add
> some permissive license to it.
>
> Also note that the "not eligible for copyright" is a very hard question
> if looking at more than one country. Ironically the most problematic
> countries might be those that have historically high requirements on
> creativity for work to be protected (as the general "needs creativity"
> rule has to be lifted for software in order to have any commercial
> software to be eligible)
>
>        Bernhard R. Link
>

I've have had an discussion with upstream Justin Maggard (added as
cc), and following is what his legal department says:

>Here's what I got from the legal dept:
>
>"We consider the NETGEAR image to be copyrighted property of NETGEAR.
>The image's binary blob does not contain any GPL code and is not
>licensed under any software license.  Permission has been granted for
>the free distribution of these images with the MiniDLNA software
>application."
>
>Just thinking about this stuff makes my head hurt. :)  If it makes you
>more comfortable, feel free to rip out the NETGEAR images from your
>tree.  Regarding the Tux image, it's hard for me to image it being an
>issue, since the Linux kernel has been embedding it for years.
>
>-Justin

-- 
Carl Fürstenberg



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629533: use mkfs.ext2/mkfs.ext3 instead of genext2fs

[Daniel Baumann]

tag 629533 pending
thanks

On 06/07/2011 03:49 PM, Colin Watson wrote:
> The attached patch converts live-build to use mkfs.ext2/mkfs.ext3
> instead.

applied, thanks.

-- 
Address:Daniel Baumann, Donnerbuehlweg 3, CH-3012 Bern
Email:  daniel.baum...@progress-technologies.net
Internet:   http://people.progress-technologies.net/~daniel.baumann/



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629623: gosa: uid and guid of deleted users are reused.

[Klaus Ade Johnstad]

Package: gosa
Severity: normal

When I delete a user, the next created user gets his uid and guid. 
This gives the newly created user access to all the files of the former
deleted user that he has stored in places such as /tmp/ /var/tmp 
/var/spool/mail and other places. 

This is what it looks like:
I create the user testes:
root@tjener:/skole/tjener/home0# ls -dln testes
drwxr-xr-x 3 1003 1003  4096  8 juni  09:47 testes
Then I delete the user testes and create the user klakla:
root@tjener:/skole/tjener/home0# ls -dln klakla
drwxr-xr-x 3 1003 1003 4096  8 juni  09:52 klakla

Both user gets 1003:1003

-- System Information:
Debian Release: 6.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=nb_NO.UTF-8, LC_CTYPE=nb_NO.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629624: python-apt: acquire.run() should fail when the lists/partial directory is missing

[Raphaël Hertzog]

Package: python-apt
Version: 0.8.0
Severity: normal

Consider the following code:
import sys
import apt_pkg

apt_pkg.init_config()
apt_pkg.config["Dir::Etc"] = 
"/home/rhertzog/deb/core/rolling/sat-britney/apt-etc"
apt_pkg.config["Dir::State"] = 
"/home/rhertzog/deb/core/rolling/sat-britney/apt-state"
apt_pkg.config["Dir::Cache"] = 
"/home/rhertzog/deb/core/rolling/sat-britney/apt-cache"
apt_pkg.init_system()

acquire = apt_pkg.Acquire()
srclist = apt_pkg.SourceList()
if not srclist.read_main_list():
sys.stdout.write("Failed to read sources.list")
if srclist.get_indexes(acquire, True):
sys.stdout.write("Update OK\n")
else:
sys.stdout.write("Update failed\n")
res = acquire.run()
if res == apt_pkg.Acquire.RESULT_CONTINUE:
sys.stdout.write("Download OK\n")
else:
sys.stdout.write("Download failed\n")

I have a created a simple sources.list in Dir::Etc (listing an http:// URL) but
I'm missing a partial directory in Dir::State::lists. The code will execute
without errors but no files will be downloaded.

Either it should auto-create the "partial" sub-dir or it should fail
with a proper error/exception. The current behavior is sub-optimal.

Cheers,

-- System Information:
Debian Release: wheezy/sid
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'proposed-updates'), (500, 
'unstable'), (500, 'testing'), (500, 'stable'), (150, 'experimental')
Architecture: i386 (x86_64)

Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages python-apt depends on:
ii  apt [libapt-pkg4.10] 0.8.14.1Advanced front-end for dpkg
ii  apt-utils [libapt-inst1.2]   0.8.14.1APT utility programs
ii  libc62.13-5  Embedded GNU C Library: Shared lib
ii  libgcc1  1:4.6.0-11  GCC support library
ii  libstdc++6   4.6.0-11The GNU Standard C++ Library v3
ii  python   2.6.6-14interactive high-level object-orie
ii  python-apt-common0.8.0   Python interface to libapt-pkg (lo
ii  python2.62.6.6-10An interactive high-level object-o
ii  python2.72.7.2~rc1-2 An interactive high-level object-o

Versions of packages python-apt recommends:
ii  iso-codes 3.26-1 ISO language, territory, currency,
ii  lsb-release   3.2-27 Linux Standard Base version report
ii  python2.6 2.6.6-10   An interactive high-level object-o

Versions of packages python-apt suggests:
pn  python-apt-dbg (no description available)
ii  python-apt-doc0.8.0  Python interface to libapt-pkg (AP
ii  python-gtk2   2.24.0-2   Python bindings for the GTK+ widge
ii  python-vte1:0.28.0-2 Python bindings for the VTE widget

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#622117: Build host name on https://buildd.debian.org/status/logs.php

[nomeata]

Hi Phil,

thanks for the pointer about the test suite. I also noticed that the builder
name is already parsed in _parse_sender(). I hence added to the tests a check
that the builder is actually parsed correctly, and then added it to the fields
to be inserted.

This of course needs appropriate changes to the SQL schema as stored in the
wanna-build git repository. I’ll send a patch, but again I guess it will be
hard to test the patch...

If this is accepted and in place, and the first build logs have the builder
set, I’ll look into patch pgstatus and maybe also cooking up a script to set
the field for pasts build logs.

Greetings,
Joachim




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#622117: [PATCH 1/2] Check for buildlog.builder in unit tests

[nomeata]

From: Joachim Breitner 

---
 lib/debian/wannabuild/logs_tests.py |1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/lib/debian/wannabuild/logs_tests.py 
b/lib/debian/wannabuild/logs_tests.py
index 512effe..94d729b 100644
--- a/lib/debian/wannabuild/logs_tests.py
+++ b/lib/debian/wannabuild/logs_tests.py
@@ -243,6 +243,7 @@ sbuild (Debian sbuild) 0.58.2 (18 Mar 2009) on 
buildd.net.philkern.de
 self.assertEqual(buildlog.version, '0.4.9-2+b2')
 self.assertEqual(buildlog.arch, 'i386')
 self.assertEqual(buildlog.suite, 'unstable')
+self.assertEqual(buildlog.builder, 'something.local')
 # Commit the log to the database.  This should not raise any exception.
 filename = buildlog.store()
 self.assertEqual(buildlog.summary()[0],
-- 
1.7.5.3




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#622117: [PATCH 2/2] Fill field "builder" in pkg_history

[nomeata]

From: Joachim Breitner 

This needs according adjustments to the SQL layout. This change is also
not covered by unit tests (which seem not to cover changes to
pkg_history at all)
---
 lib/debian/wannabuild/logs.py |2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/lib/debian/wannabuild/logs.py b/lib/debian/wannabuild/logs.py
index b70a045..aeca4d7 100644
--- a/lib/debian/wannabuild/logs.py
+++ b/lib/debian/wannabuild/logs.py
@@ -669,6 +669,7 @@ class MailedBuildLog(BuildLog):
 self.version is not None
 self.timestamp is not None
 self.state is not None
+self.builder is not None
 'build_time' in self.__dict__
 'disk_space' in self.__dict__
 """
@@ -683,6 +684,7 @@ class MailedBuildLog(BuildLog):
   version=self.version,
   
timestamp=datetime.utcfromtimestamp(self.timestamp),
   result=self.state,
+  builder=self.builder,
   build_time=self.build_time,
   disk_space=self.disk_space)
 self.factory.dbfactory.conn.execute(sql)
-- 
1.7.5.3




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#622117: Build host name on https://buildd.debian.org/status/logs.php

[nomeata]

Hi,

as promised, the (ovious) patch against the schema. I hope this is of any use
:-)

Greetings,
Joachim




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#622117: [PATCH] Extend pkg_history table with "builder" field

[nomeata]

From: Joachim Breitner 

---
 schema/arches-tables.in |1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/schema/arches-tables.in b/schema/arches-tables.in
index a7b649b..3957cf3 100644
--- a/schema/arches-tables.in
+++ b/schema/arches-tables.in
@@ -64,6 +64,7 @@ CREATE TABLE "ARCH".pkg_history (
 version character varying NOT NULL,
 "timestamp" timestamp without time zone NOT NULL,
 result character varying NOT NULL,
+builder character varying,
 build_time integer,
 disk_space bigint,
 primary key (package, distribution, version, "timestamp")
-- 
1.7.5.3




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#627887: add support for jasper initramfs system

[Daniel Baumann]

tag 627887 pending
thanks

On 06/07/2011 03:39 PM, Colin Watson wrote:
> This should make '--initramfs none' generally
> work more consistently, mostly by filling in a few entries in case
> statements.

applied, thanks.

for the case of jasper, does it require any special treatment, or is all
that lb is doing with '--initramfs none' already enough?

-- 
Address:Daniel Baumann, Donnerbuehlweg 3, CH-3012 Bern
Email:  daniel.baum...@progress-technologies.net
Internet:   http://people.progress-technologies.net/~daniel.baumann/



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629592: cyrus-common-2.2: confusing/contradictory information on lenny->squeeze upgrade

[Ondřej Surý]

On Wed, Jun 8, 2011 at 10:02, Ross Boylan  wrote:
> On Wed, 2011-06-08 at 08:54 +0200, Ondřej Surý wrote:
>> Slight correction, better use always the latest version of the script:
>>
>> http://anonscm.debian.org/gitweb/?p=pkg-cyrus-imapd/cyrus-imapd-2.4.git;a=blob;f=debian/cyrus-upgrade-db
>>
>> (i.e. without the hash)
>>
>> O.
> Do you think that script will be effective for lenny -> squeeze?

Yes, it should be version agnostic and works only on top of cyrus-db-types.txt

> And what, if anything, do I need to do to make the transition?

Yes, you do.

> Update
> the berkeley* databases listed in cyrus-db-types.active (except I can
> delete TLS)?

Well, you can also delete the duplicate.db it doesn't contain any
important information.

Also you need to delete /var/lib/cyrus/db/ (backup it first).

But the script should work.

O.
-- 
Ondřej Surý 



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629625: xul-ext-custom-tab-width: premature upload to sid

[Ralf Treinen]

Package: xul-ext-custom-tab-width
Version: 1.0.1-2
Tags: sid
User: trei...@debian.org
Usertags: edos-uninstallable

Hi,

xul-ext-custom-tab-width should be in experimental, not sid, since it
depends on iceweasel (>= 4.0~b3) . We currently only have iceweasel 3.5.19-2
in, 4.0.1-2 in experimental.

Cheers -Ralf.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629592: cyrus-common-2.2: confusing/contradictory information on lenny->squeeze upgrade

[Ross Boylan]

On Wed, 2011-06-08 at 08:54 +0200, Ondřej Surý wrote:
> Slight correction, better use always the latest version of the script:
> 
> http://anonscm.debian.org/gitweb/?p=pkg-cyrus-imapd/cyrus-imapd-2.4.git;a=blob;f=debian/cyrus-upgrade-db
> 
> (i.e. without the hash)
> 
> O.
Do you think that script will be effective for lenny -> squeeze?

And what, if anything, do I need to do to make the transition?  Update
the berkeley* databases listed in cyrus-db-types.active (except I can
delete TLS)?
Ross
> 
> On Wed, Jun 8, 2011 at 08:47, Ondřej Surý  wrote:
> > Hi Ross,
> >
> > unfortunately it won't be fixed in lenny/squeeze, but I already wrote
> > an upgrade script for squeeze->wheezy.
> >
> > You can find it here:
> >
> > http://anonscm.debian.org/gitweb/?p=pkg-cyrus-imapd/cyrus-imapd-2.4.git;a=blob;f=debian/cyrus-upgrade-db;h=c7d8d55b99982b5df97e5a875d3809a9d593228c;hb=HEAD
> >
> > I'll keep this bug open until wheezy is out, so everybody can find it.
> >
> > We'll also welcome any patches to documentation for wheezy version,
> > since with the upgrade script some of the README.Debian might have
> > become obsolete.
> >
> > O.
> >
> > On Tue, Jun 7, 2011 at 22:58, Ross Boylan  wrote:
> >> Package: cyrus-common-2.2
> >> Version: 2.2.13-19
> >> Severity: normal
> >>
> >> During upgrade from lenny to squeeze debconf said
> >>  Configuring cyrus-common-2.2 Modified database backends
> >>  Comparison between /usr/lib/cyrus/cyrus-db-types.txt and
> >>  /usr/lib/cyrus/cyrus-db-types.active shows that database
> >>  backends for Cyrus IMAPd have been changed. This means that
> >>  those databases for which the database backends changed might
> >>  need to be converted manually to the new format, using the
> >>  cvt_cyrusdb(8) utility.  Please refer to
> >>  /usr/share/doc/cyrus-common-2.2/README.Debian.database for more
> >>  information.  Do not start cyrmaster until you have converted
> >>  the databases to the new format.
> >>
> >> README.Debian.database says, in part
> >> 2. Find out which databases to convert:
> >>   diff -u /usr/lib/cyrus/cyrus-db-types.active \
> >>   /usr/lib/cyrus/cyrus-db-types.txt
> >>
> >>   The databases are these in the default install:
> >>   DUPLICATE/var/lib/cyrus/deliver.db
> >>   MBOX /var/lib/cyrus/mailboxes.db
> >>   TLS  /var/lib/cyrus/tls_sessions.db
> >>
> >>   Don't bother upgrading the TLS database, just delete it: the information
> >>   there is not reused when you stop Cyrus.
> >>
> >>   If the BerkeleyDB version is what was changed, you need to use the
> >>   Berkeley DB upgrade utility in all db* databases.  See the manpages for
> >>   db*_upgrade. Note that you need to use the db*_upgrade utility with the
> >>
> >> But when I do the diff I get
> >> @@ -1,5 +1,5 @@
> >>  ANNOTATION skiplist
> >> -DBENGINE BerkeleyDB4.2
> >> +DBENGINE BerkeleyDB4.7
> >>  DUPLICATE berkeley-nosync
> >>  MBOX skiplist
> >>  PTS berkeley
> >>
> >>
> >> There are several issues:
> >> 1. I did a default install in Lenny, but I don't see what the notes say I 
> >> should see.
> >> 2. Despite the debconf note, it looks as if I need db*_upgrade rather than 
> >> cvt_cyrusdb.
> >> 3. I'm a little confused about whether I should use the db4.7_upgrade or 
> >> db4.2.
> >>   Though I think it has to be 4.7, and a few lines after the excerpted 
> >> part of
> >>   README.Debian.database db4.7_upgrade appears explicitly, though only
> >>   as a "for example".
> >> 4. And I'm not sure which databases to upgrade.  Also, I though the 
> >> default, even in Lenny,
> >>   was skiplist.
> >>
> >> Here's my full cyrus-db-types.active:
> >> NNOTATION skiplist
> >> DBENGINE BerkeleyDB4.2
> >> DUPLICATE berkeley-nosync
> >> MBOX skiplist
> >> PTS berkeley
> >> QUOTA quotalegacy
> >> SEEN skiplist
> >> SUBS flat
> >> TLS berkeley-nosync
> >>
> >>
> >> -- System Information:
> >> Debian Release: 6.0.1
> >>  APT prefers stable
> >>  APT policy: (500, 'stable')
> >> Architecture: amd64 (x86_64)
> >>
> >> Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
> >> Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
> >> Shell: /bin/sh linked to /bin/dash
> >>
> >> Versions of packages cyrus-common-2.2 depends on:
> >> ii  adduser3.112+nmu2add and remove users and 
> >> groups
> >> ii  debconf [d 1.5.36.1  Debian configuration 
> >> management sy
> >> ii  dpkg   1.15.8.10 Debian package management 
> >> system
> >> ii  exim4-daem 4.72-6lightweight Exim MTA (v4) 
> >> daemon
> >> ii  gawk   1:3.1.7.dfsg-5GNU awk, a pattern scanning 
> >> and pr
> >> ii  libasn1-8- 1.4.0~git20100726.dfsg.1-1+b1 Heimdal Kerberos - ASN.1 
> >> library
> >> ii  libc6  2.11.2-10 Embedded GNU C Library: 
> >> Shared lib
> >> ii  libcomerr2 1.41.12-2 common error description 
> >> library
> >> ii  libdb4.7   4.7.25-9   

Bug#629611: xserver-xorg: reproducible X server segfault

[Cyril Brulebois]

Hi,

Alan Curry  (07/06/2011):
> I found an easy way to crash the X server: view a 1bpp image with xli, and
> increase the size with the '>' key a few times.
> 
> After the first resize, there's a small area of junk on the screen, to
> the left of the xli window. The junk area increases roughly in
> proportion with the xli window. The crash coincides with the point
> where the xli window has grown past the right edge of the screen.
> […]
> Tested in isolation, with nothing but X server and xli, not even a
> window manager. The resulting segfault and backtrace is in the stuff
> that reportbug has included below.

thanks for the test case, even though I can't reproduce it. A full
backtrace might be nice:
  http://pkg-xorg.alioth.debian.org/howto/use-gdb.html

Mraw,
KiBi.


signature.asc
Description: Digital signature

Bug#629207: metacity: Missing window control buttons

[Daniel Huhardeaux]

FYI I already opened a bug about this problem against compiz-gtk in 
march. See bug 617763


--
Daniel



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629423: cannot access network location without a bookmark

[Josselin Mouette]

Le mardi 07 juin 2011 à 19:06 +0200, Michal Suchanek a écrit : 
> Package: gvfs
> Version: 1.6.4-3
> Severity: normal
> 
> reassign 629423 gtk+2.0 2.24.4-3
> tags 629423 patch
> clone 629423 -1
> reassign -1 gtk+3.0 3.0.10-1
> quit
> 
> This is because the location_entry is not properly initialized.

Sorry but we are definitely not going to apply such a change without
upstream accepting it first. Please discuss this with upstream.

-- 
 .''`.  Josselin Mouette
: :' :
`. `'
  `-




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629626: gosa should also lock the homedir of a deleted user.

[Klaus Ade Johnstad]

Package: gosa
Severity: normal

When a user is deletd in gosa, the homedir gets a new name, and 
is set to owned by root:root. Gosa should also lock the newly named 
homedir, using 0700 as permissions.

The homedir of the deletd user klaus currently looks like this:
drwxr-xr-x 5 root   root4096  8 juni  09:52 rm_20110608_klaus
It would be better securitywise if it looked like this:
drwx-- 5 root   root4096  8 juni  09:52 rm_20110608_klaus


-- System Information:
Debian Release: 6.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=nb_NO.UTF-8, LC_CTYPE=nb_NO.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629627: linux-2.6: please support kdump (enable CONFIG_CRASH_DUMP=y?)

[Timo Juhani Lindfors]

Package: linux-2.6
Version: 2.6.32-34squeeze1
Severity: wishlist

kexec, kdump and crash are pretty powerful debugging tools. It would be
nice if debian kernels supported kdump fully. If I read
/usr/share/doc/kdump-tools/README.Debian correctly this would involve
enabling CONFIG_CRASH_DUMP=y.

I could not find discussion on why this is not done. Are there any
serious drawbacks? If there are, I'm fine with having to build my own
kernels but lets document the problems somewhere please :-)


-- System Information:
Debian Release: 6.0.1
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629628: RFP: u3d -- library for producing U3D files

[Salvatore Bonaccorso]

Package: wnpp
Severity: wishlist

* Package name: u3d
  Version : 1.4.2
  Upstream Author : Alexey Balakin 
* URL : 
http://sourceforge.net/projects/mathgl/files/u3d-1.4.2.tar.gz
* License : Apache License 2.0
  Programming Lang: C++
  Description : library for producing U3D files

Alexey Balakin, author of udav/mathgl asked for inclusion of u3d in
Debian. u3d is a library for producing U3D files. MathGL can use it
for producing u3d and u3d-pdf files directly.

Is anyone (e.g. from debian-science) who would like to have a look at
it?

Bests
Salvatore



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629611: xserver-xorg: reproducible X server segfault

[pacman]

Cyril Brulebois writes:
> 
> thanks for the test case, even though I can't reproduce it. A full
> backtrace might be nice:
>   http://pkg-xorg.alioth.debian.org/howto/use-gdb.html

Here's what I got from that.

(gdb) bt full
#0  0x0fb028bc in *__GI_raise (sig=6)
at ../nptl/sysdeps/unix/sysv/linux/raise.c:64
r4 = 
r7 = 
r12 = 
r5 = 6
r8 = 
r10 = 
r0 = 250
r3 = 
r6 = 
r9 = 
r11 = 
sc_ret = 
pid = 0
selftid = 3834
#1  0x0fb07f74 in *__GI_abort () at abort.c:92
act = {__sigaction_handler = {sa_handler = 0, sa_sigaction = 0}, 
  sa_mask = {__val = {0, 0, 520, 520, 130, 1211959296, 1211959296, 
  270448596, 270404504, 0, 268549068, 1208098800, 1208101096, 
  3216205408, 1208020332, 263000940, 264540768, 3216205408, 
  263533356, 270448596, 270448652, 270448596, 0, 270420228, 
  270448592, 3216205472, 1208047712, 671106084, 32, 0, 264373708, 
  0}}, sa_flags = 0, sa_restorer = 0xfba7b1c <__close_nocancel+8>}
sigs = {__val = {32, 0 }}
#2  0x1007be98 in ddxGiveUp () at ../../../../hw/xfree86/common/xf86Init.c:1214
i = 
#3  0x1007bf8c in AbortDDX () at ../../../../hw/xfree86/common/xf86Init.c:1260
i = 1
#4  0x1006dea4 in AbortServer () at ../../os/log.c:404
No locals.
#5  0x1006e67c in FatalError (
f=0x101b1094 "Caught signal %d (%s). Server aborting\n")
at ../../os/log.c:529
args = {{gpr = 3 '\003', fpr = 0 '\000', reserved = 0, 
overflow_arg_area = 0xbfb36778, reg_save_area = 0xbfb366f8}}
beenhere = 1
#6  0x1007a70c in OsSigHandler (signo=11, sip=0xbfb367e0, 
unused=) at ../../os/osinit.c:156
No locals.
#7  
No symbol table info available.
#8  fb24_32BltDown (srcLine=0x4802b804 "", srcStride=128, 
srcX=, 
dstLine=0x483d01dc , dstStride=5632, 
dstX=, width=524, height=15, alu=3, pm=4294967295)
at ../../fb/fb24_32.c:133
s0 = 
s1 = 
src = 0x4802bff4
dst = 0x483d07d0 
w = 
pixel = 
_ca1 = 0
_cx1 = 0
_ca2 = 4294967295
_cx2 = 0
#9  0x0f68a2c8 in fb24_32CopyMtoN (pSrcDrawable=, 
pDstDrawable=, pGC=0x10226e20, pbox=0xbfb36ef8, 
nbox=1, dx=-499, dy=-370, reverse=, upsidedown=0, 
bitplane=0, closure=0x0) at ../../fb/fb24_32.c:514
pPriv = 0x1054b610
src = 0x48024000 ""
srcStride = 128
dst = 0x48089000 
dstStride = 5632
blt = 0xf6894a0 
srcXoff = 0
srcYoff = 0
dstXoff = 0
dstYoff = 0
#10 0x10174338 in miCopyRegion (pSrcDrawable=0x10226e80, 
pDstDrawable=, pGC=, 
pDstRegion=, dx=-499, dy=-370, 
copyProc=0xf68a140 , bitPlane=0, closure=0x0)
at ../../mi/micopy.c:138
reverse = 
upsidedown = 
pbox = 
nbox = 
pboxNew1 = 
pboxNew2 = 
pboxBase = 
pboxNext = 
pboxTmp = 
#11 0x1017498c in miDoCopy (pSrcDrawable=0x10226e80, pDstDrawable=0x10226320, 
pGC=0x10226e20, xIn=1, yIn=0, widthSrc=524, heightSrc=256, xOut=500, 
yOut=370, copyProc=0xf68a140 , bitPlane=0, closure=0x0)
at ../../mi/micopy.c:338
prgnSrcClip = 0x0
freeSrcClip = 0
prgnExposed = 
rgnDst = {extents = {x1 = 500, y1 = 370, x2 = 1024, y2 = 626}, 
  data = 0x0}
dx = -499
dy = -370
box_x1 = 
box_y1 = 
box_x2 = 
box_y2 = 
fastSrc = 
fastDst = 1
fastExpose = 1
#12 0x0f695fa0 in fbCopyArea (pSrcDrawable=, 
pDstDrawable=, pGC=, 
xIn=, yIn=, 
widthSrc=, heightSrc=, 
xOut=, yOut=0) at ../../fb/fbcopy.c:344
copy = 
#13 0x0f6139a4 in XAACopyAreaFallback (pSrc=0x10226e80, pDst=0x10226320, 
pGC=0x10226e20, srcx=1, srcy=0, width=524, height=256, dstx=1, dsty=0)
at ../../../../hw/xfree86/xaa/xaaFallback.c:85
pGCPriv = 0x1054b5c0
oldFuncs = 0xf673fd8
#14 0x0f614e6c in XAACopyArea (pSrcDrawable=0x10226e80, 
pDstDrawable=0x10226320, pGC=0x10226e20, srcx=1, srcy=0, width=524, 
height=256, dstx=1, dsty=0) at ../../../../hw/xfree86/xaa/xaaCpyArea.c:72
infoRec = 0x1022acb0
#15 0x0f65f454 in cwCopyArea (pSrc=0x10226e80, pDst=0x10226320, 
pGC=0x10226e20, srcx=1, srcy=0, w=524, h=256, dstx=1, dsty=0)
at ../../../miext/cw/cw_ops.c:201
pGCPrivate = 0x10225f28
dst_off_x = 0
dst_off_y = 0
pBackingDst = 0x10226320
pBackingGC = 0x10226e20
src_off_x = 0
src_off_y = 0
pBackingSrc = 0x10226e80
#16 0x100f3d54 in damageCopyArea (pSrc=0x10226e80, pDst=0x10226320, 
pGC=0x10226e20, srcx=1, srcy=0, width=524, height=256, dstx=1, dsty=0)
at ../../../miext/damage/damage.c:949
ret = 
pGCPriv = 
oldFuncs = 0x101e8668
#17 0x100cee24 in doShmPutImage (client=0x10226c98) at ../../Xext/shm.c:508
pPixmap =

Bug#524065: Reproduce the bug

[Marco Túlio Gontijo e Silva]

Hi Joachim and Stefano.

I can not reproduce this bug in sid, can you?  I remember of having this
problem, but now it seems that it's gone.  If you can't, I believe we can close
the bug.

Greetings.

-- 
marcot
http://marcot.eti.br/


signature.asc
Description: PGP signature

Bug#629203: nvidia-glx: gnome-shell corruption after suspend/resume

[Andreas Beckmann]

On 2011-06-04 15:54, Tony Houghton wrote:
> Package: nvidia-glx
> Version: 275.09-1

Please retry with 275.09.04-1. This is said to fix some KDE issues, but
eventually it helps in your case, too.
If it does not help, please check the NVIDIA forums for a matching
report and add additional information there or create a new report. The
NVIDIA bug reporting instructions can be found here:
http://www.nvnews.net/vbulletin/showthread.php?t=46678
Please post the URL to an existing or new thread here, so that we may
follow progress.

Andreas



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#623955: nvidia-glx: regressions with GeForce 8200

[Andreas Beckmann]

275.09.04-1 (beta) is available in experimental.
Please retry. This version is said to fix some regressions with KDE.

Andreas



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#590214: (half) patch to receive reportbug submission via HTTP transport

[Stefano Zacchiroli]

tags 590269 + patch
thanks

As briefly discussed on IRC, here is (half) patch to implement this
feature request. It's a CGI that:

- receive via HTTP file upload a bug report. The bug report is meant to
  prepared on the user machine by reportbug as usual, so by default it
  will contain all the information that mail-submitted bug reports
  contain

- do some syntax checking on the bug report, and fail with an HTTP error
  code if that fails

- do some mail header sanitization to reduce SPAM effects. AFAICT, after
  sanitization the SPAM risks of using the CGI would be the same that we
  have at present with the mail-based submission interface

It's only half a patch because, for complete testing, we also need a
patch for #590214 (Cc:-ed), i.e. we need support in reportbug for
delivering a MIME bug report via HTTP upload rather than via mail. If a
kind soul can write this, I'll be happy to set up a test instance of the
script for more wide testing.

Note that at present, the following testing path does *not* work
properly:

- prepare a bug report with reportbug
- save it as a draft on disk and quit
- upload the file using the CGI

because the "save to draft" feature of reportbug does not save the
entire MIME bug report (e.g. it lacks attachments and other details). So
we really need proper HTTP upload support in reportbug to proceed.

If nevertheless someone want to test the attached CGI, you need to set
$bts_to to 'sub...@bugs.debian.org' and $DEBUG to 0 (see comments in the
source code).

Feedback is welcome,
Cheers.
-- 
Stefano Zacchiroli -o- PhD in Computer Science \ PostDoc @ Univ. Paris 7
zack@{upsilon.cc,pps.jussieu.fr,debian.org} -<>- http://upsilon.cc/zack/
Quando anche i santi ti voltano le spalle, |  .  |. I've fans everywhere
ti resta John Fante -- V. Capossela ...| ..: |.. -- C. Adams
#!/usr/bin/perl -w
#
# http-submit.cgi - HTTP bug submission gateway for Debbugs
# Copyright (C) 2011  Stefano Zacchiroli 
#
# This program free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License version 2 as published by the
# Free Software Foundation; either Version 2 of the License, or (at your
# option) any later version.

use strict;

use CGI;
use MIME::Parser;


# Max bug report size.  Note: this check is only to avoid in-memory parsing of
# (too) large MIME entities. Proper defense against ridiculously large bug
# reports requires quota at the HTTP level (e.g. Apache's LimitRequestBody).
my $max_report_size = 10 * 2 ** 20; #  (= 10 Mb)
my $max_headers = 50;

my $bts_to = '';# set this to 'sub...@bugs.debian.org' for production 
use
my $DEBUG = 1;  # debug / dry run mode; must be set to 0 for production 
use

my $howto_url = "http://www.debian.org/Bugs/Reporting";;
my $sendmail = "/usr/sbin/sendmail";
my %http_status = (
ok   => "200 OK",
badreq   => "400 Bad Request",
toobig   => "413 Request Entity Too Large",
internal => "500 Internal Server Error",
);


# debug routine
sub dump_mime($$) {
my ($q, $mime) = @_;

print $q->header(-type=>"text/html", -status=>$http_status{'ok'}),
$q->start_html,
$q->h1('debug / dry run'), "\n",
$q->pre($q->escapeHTML($mime->stringify)), "\n",
$q->end_html;
}

# abort CGI execution returning an HTTP error
sub error($$$) {
my ($q, $status, $msg) = @_;

print $q->header(-type => "text/html", -status => $status),
$q->start_html($status),
$q->h1($status), "\n",
$q->p($msg), "\n",
$q->p("Abort."),
$q->end_html;
exit(0);
}

# extract a bug report submitted via HTTP file upload (RFC 1867)
sub get_report($) {
my ($q) = @_;

my $fh = $q->upload('report');
if (! defined($fh)) {   # no file uploaded (i.e. no bug report)
error($q, $http_status{'badreq'}, "No bug report has been submitted.");
}
if (! $fh && $q->cgi_error) {   # cgi error (e.g. upload aborted)
error($q, $q->cgi_error, "CGI submission error.");
}
my $handle = $fh->handle;   # get an IO::Handle
if (($handle->stat)[7] > $max_report_size) {
error($q, $http_status{'toobig'}, "Bug report is too large.");
}

return $handle;
}

# check that the bug report body conforms to debbugs submission syntax
sub check_syntax($) {
my ($body) = @_;

my $io = $body->open("r");
my $line = <$io> or return 0;
return 0 unless $line =~ /^Package:\s+[a-z0-9+.-]/; # starts w/ Package:

my $in_headers = 1;
my $headers_no = 1;
while (defined(my $line = <$io>)) {
if ($line =~ /^\w+:\s+/) {  # starts w/ a (pseudo) header block...
$headers_no++;
return 0 if ($headers_no > $max_headers);
} elsif ($in_headers && $line =~ /^\s+$/) { # ...followed by empty line
$in_headers = 0;
last;
}
}
$io->close;

return 1;
}

# extract, validate, and sanitize a MIME::Entity bug report
sub ge

Bug#629629: RFP: u3d -- library for producing U3D files

[mathgl.abala...@gmail.com]

Hi,

I think the author of U3D should be Michail Vidiassov. I'm just an
"experienced" user :)

2011/6/8 Salvatore Bonaccorso :
> Package: wnpp
> Severity: wishlist
>
> * Package name    : u3d
>  Version         : 1.4.2
>  Upstream Author : Alexey Balakin 
> * URL             : 
> http://sourceforge.net/projects/mathgl/files/u3d-1.4.2.tar.gz
> * License         : Apache License 2.0
>  Programming Lang: C++
>  Description     : library for producing U3D files
>
> Alexey Balakin, author of udav/mathgl asked for inclusion of u3d in
> Debian. u3d is a library for producing U3D files. MathGL can use it
> for producing u3d and u3d-pdf files directly.
>
> Is anyone (e.g. from debian-science) who would like to have a look at
> it?
>
> Bests
> Salvatore
>

-- 
All the best,
Alexey Balakin



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#524065: [Pkg-haskell-maintainers] Bug#524065: Reproduce the bug

[Joachim Breitner]

Hi,

Am Mittwoch, den 08.06.2011, 06:04 -0300 schrieb Marco Túlio Gontijo e
Silva:
> I can not reproduce this bug in sid, can you?  I remember of having this
> problem, but now it seems that it's gone.  If you can't, I believe we can 
> close
> the bug.

yes, still reproducible here. Do you have the EWMH-module active in your
xmonad configuration?

Greetings,
Joachim

-- 
Joachim "nomeata" Breitner
Debian Developer
  nome...@debian.org | ICQ# 74513189 | GPG-Keyid: 4743206C
  JID: nome...@joachim-breitner.de | http://people.debian.org/~nomeata


signature.asc
Description: This is a digitally signed message part

Bug#629628: RFP: u3d -- library for producing U3D files

[Teemu Ikonen]

merge 629628 581854
thanks

On Wed, Jun 8, 2011 at 10:51 AM, Salvatore Bonaccorso  wrote:
> Package: wnpp
> Severity: wishlist
>
> * Package name    : u3d
>  Version         : 1.4.2
>  Upstream Author : Alexey Balakin 
> * URL             : 
> http://sourceforge.net/projects/mathgl/files/u3d-1.4.2.tar.gz
> * License         : Apache License 2.0
>  Programming Lang: C++
>  Description     : library for producing U3D files
>
> Alexey Balakin, author of udav/mathgl asked for inclusion of u3d in
> Debian. u3d is a library for producing U3D files. MathGL can use it
> for producing u3d and u3d-pdf files directly.
>
> Is anyone (e.g. from debian-science) who would like to have a look at
> it?

U3D is also needed for meshlab, so packages would be nice to have.
Unfortunately I'm too busy at the moment to take on another package,
so if anyone is looking for stuff to do, please have a look :)

Best,

Teemu



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#625877: Problems of using the beta driver, as I use the nvidia-kernel-dkms

[Andreas Beckmann]

On 2011-06-07 23:25, M. wrote:

> as I use the
> nvidia-kernel-dkms system and even if I try to remove the relevant
> packages the beta driver directly from Nvidia would not install.

If you want us to look into this issue, please open a new bug report and
give detailed lists of *nvidia* packages you installed and removed, as
well as the error messages from nvidia-installer. The nvidia-installer
probably won't work properly as long as any *nvidia* package is still
installed, eventually they even need to be purged.

Andreas



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629418: nvidia-glx: PowerMizer doesn't detect change in power source

[Andreas Beckmann]

On 2011-06-07 21:20, Diggory Hardy wrote:
> The nvidia-packaged nvidia-settings has the exact same output, as you
> expected (also when querying GPUCurrentPerfLevel and GPUCurrentClockFreqs).

OK.

> I was surprised earlier to find "nvidia-settings -q GPUPowerSource -t" did
> list the computer as being on battery power. This was after resuming from
> standby on battery power. After plugging it back in to a power source, it
> didn't immediately say the laptop had changed to AC power, but coming back
> perhaps half an hour later it did, so it appears it *is* detecting changes
> in power source, but not for several minutes at least (when tested on
> openSUSE it was immediate).

I don't know what NVIDIA uses to get the power information ...
eventually some delayed ACPI reaction?

>> A quick search in the NVIDIA forum found the following threads:
>> http://www.nvnews.net/vbulletin/showthread.php?t=133555
>> http://www.nvnews.net/vbulletin/showthread.php?t=136245

I'm sorry but I have no idea how to help with this problem.
You might consider bugging NVIDIA about it, but don't expect a reaction:
http://www.nvnews.net/vbulletin/showthread.php?t=46678

Andreas



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629630: iproute: New 'tuntap' object isn't documented in ip's man page

[Frederic Boiteux]

Package: iproute
Version: 20100519-3
Severity: wishlist


Hello,

  I've noticed that 'ip' command from iproute package now have a 'tuntap' object
which let you define such type of device, instead of using tunctl of 
uml-utilities for example :


$ ip tuntap help
Usage: ip tuntap { add | del } [ dev PHYS_DEV ] 
  [ mode { tun | tap } ] [ user USER ] [ group GROUP ]
  [ one_queue ] [ pi ] [ vnet_hdr ]

Where: USER  := { STRING | NUMBER }
   GROUP := { STRING | NUMBER }


  It could be nice to have it documented in 'ip' manual page.

 Fred.


-- System Information:
Debian Release: 6.0.1
  APT prefers squeeze
  APT policy: (990, 'squeeze'), (990, 'stable'), (975, 'proposed-updates'), 
(975, 'oldstable'), (970, 'oldstable'), (800, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-calistel (SMP w/4 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages iproute depends on:
ii  libc6 2.11.2-10  Embedded GNU C Library: Shared lib
ii  libdb4.8  4.8.30-2   Berkeley v4.8 Database Libraries [

Versions of packages iproute recommends:
ii  libatm1  1:2.5.1-1.2 shared library for ATM (Asynchrono

Versions of packages iproute suggests:
ii  iproute-doc   20100519-3 networking and traffic control too

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629628: RFP: u3d -- library for producing U3D files

[Salvatore Bonaccorso]

Hi Teemu

On Wed, Jun 08, 2011 at 11:20:39AM +0200, Teemu Ikonen wrote:
> merge 629628 581854
> thanks
> 
> On Wed, Jun 8, 2011 at 10:51 AM, Salvatore Bonaccorso  
> wrote:
> > Package: wnpp
> > Severity: wishlist
> >
> > * Package name    : u3d
> >  Version         : 1.4.2
> >  Upstream Author : Alexey Balakin 
> > * URL             : 
> > http://sourceforge.net/projects/mathgl/files/u3d-1.4.2.tar.gz
> > * License         : Apache License 2.0
> >  Programming Lang: C++
> >  Description     : library for producing U3D files
> >
> > Alexey Balakin, author of udav/mathgl asked for inclusion of u3d in
> > Debian. u3d is a library for producing U3D files. MathGL can use it
> > for producing u3d and u3d-pdf files directly.
> >
> > Is anyone (e.g. from debian-science) who would like to have a look at
> > it?
> 
> U3D is also needed for meshlab, so packages would be nice to have.
> Unfortunately I'm too busy at the moment to take on another package,
> so if anyone is looking for stuff to do, please have a look :)

Thanks for merging those bugreports. I missed to find the already
filled RFP.

Best,
Salvatore


signature.asc
Description: Digital signature

Bug#524065: [Pkg-haskell-maintainers] Bug#524065: Reproduce the bug

[Marco Túlio Gontijo e Silva]

Hi Joachim.

Excerpts from Joachim Breitner's message of Qua Jun 08 06:21:00 -0300 2011:
(...)
> Am Mittwoch, den 08.06.2011, 06:04 -0300 schrieb Marco Túlio Gontijo e
> Silva:
> > I can not reproduce this bug in sid, can you?  I remember of having this
> > problem, but now it seems that it's gone.  If you can't, I believe we can 
> > close
> > the bug.
> 
> yes, still reproducible here. Do you have the EWMH-module active in your
> xmonad configuration?

No, I'm getting it's funcionality from gnomeConfig, I guess.  Is there a reason
for using EWMH instead?

Greetings.
(...)
-- 
marcot
http://marcot.eti.br/


signature.asc
Description: PGP signature

Bug#628437: Display freezes after ksplash screen is finished

[Andreas Beckmann]

Please try 275.09.04-1 from experimental, this new beta release fixes
some issues with KDE.

Andreas



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#611452: xserver-xorg-core: switching to linux console leaves screen blank

[Andreas Beckmann]

A new beta release (275.09.04-1) is available in experimental.

Andreas

PS: Please keep the bug in Cc:



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629207: metacity: Missing window control buttons

[Gergely Nagy]

Daniel Huhardeaux  writes:

> FYI I already opened a bug about this problem against compiz-gtk in
> march. See bug 617763

What I saw is a bit different: I can start gtk-window-decorator, just
fine, and it does not segfault. Window controls are missing
nevertheless.

(Though, it might be the same underlying problem, just a different
manifestation of it in my case)

-- 
|8]



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629631: email-reminder: Author's birthday mails should be turned off by default

[Meike Reichle]

Package: email-reminder
Version: 0.7.6-2
Severity: minor
Tags: upstream

I think the "Send birthday wishes to the email-reminder author" option
should be disabled by default. It may be meant to be funny but in my
impression this touches on privacy issues and should thus be turned off by
default.

Kind regards,
Meike Reichle

-- System Information:
Debian Release: wheezy/sid
  APT prefers stable
  APT policy: (600, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-3-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages email-reminder depends on:
ii  adduser   3.112+nmu2 add and remove users and groups
ii  cron  3.0pl1-116 process scheduling daemon
ii  debconf [debconf-2.0] 1.5.39 Debian configuration management sy
ii  libdate-manip-perl6.11-1 module for manipulating dates
ii  libemail-valid-perl   0.184-1Perl module for checking the valid
ii  libgtk2-perl  2:1.223-1  Perl interface to the 2.x series o
ii  libxml-dom-perl   1.44-1 Perl module for building DOM Level
ii  perl  5.10.1-20  Larry Wall's Practical Extraction 

Versions of packages email-reminder recommends:
ii  anacron   2.3-14 cron-like program that doesn't go 
ii  exim4 4.76-1 metapackage to ease Exim MTA (v4) 
ii  exim4-daemon-light [mail-tran 4.76-1 lightweight Exim MTA (v4) daemon
ii  libauthen-sasl-perl   2.1500-1   Authen::SASL - SASL Authentication
ii  libemail-mime-encodings-perl  1.313-1unified interface to MIME encoding
ii  libnet-smtp-ssl-perl  1.01-2 SSL support for Net::SMTP

email-reminder suggests no packages.

-- debconf information excluded



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629632: multiple routers metric

[Németh Csaba]

Package: isc-dhcp-client
Version: 4.1.1-P1-15+squeeze2

If I define multiple routers on dhcpd-server (line 'option routers'),
the client doesn't add metric for gateways.

Original lines:
for router in $new_routers; do
 route add default dev $interface gw $router $metric_arg
done

Maybe the solution:

metric_arg=1
for router in $new_routers; do
 route add default dev $interface gw $router $metric_arg
 metric_arg=$(( $metric_arg+1 ))
done


Sorry for my poor English

Best regards:
Csaba Németh



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#613534: Seems to be rather a bug in nvidia, not the kernel

[Andreas Beckmann]

On 2011-06-01 21:08, Andrei Popescu wrote:
> Just tried it. I had to also use nvidia-glx from wheezy, as 195 won't 
> build on 2.6.38, but I could definitely reproduce the bug.

I can send you a 195xx nvidia-kernel-dkms package that should work with
2.6.38 and newer kernels. But you will need the Xorg from squeeze as
195xx does not support anything newer.


Andreas



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#625541: nvidia-glx: Screen blacking out as a result of mouse movement, scrolling & clicks

[Andreas Beckmann]

On 2011-05-29 09:44, Andreas Beckmann wrote:
> Two new driver versions are available:
>   * 270.41.19-1 (release) in unstable
  * 275.09.04-1 (beta) in experimental, this fixes some regressions with KDE
> Please try them.

Andreas



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#627887: add support for jasper initramfs system

[Colin Watson]

On Wed, Jun 08, 2011 at 10:10:18AM +0200, Daniel Baumann wrote:
> On 06/07/2011 03:39 PM, Colin Watson wrote:
> > This should make '--initramfs none' generally
> > work more consistently, mostly by filling in a few entries in case
> > statements.
> 
> applied, thanks.
> 
> for the case of jasper, does it require any special treatment, or is all
> that lb is doing with '--initramfs none' already enough?

I'm still verifying (and probably won't be *entirely* certain until we
make the switch in production ...), but at this point I think that
'--initramfs none --packages jasper' is enough to make it work.  Thanks.

-- 
Colin Watson   [cjwat...@ubuntu.com]



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629633: [INTL:es] Spanish debconf template translation for grub2

[Francisco Javier Cuadrado]

Package: grub2
Version: 1.99-5
Severity: wishlist
Tags: l10n patch


-- 
Saludos

Fran
# grub2 po-debconf translation to Spanish
# Copyright (C) 2007, 2009, 2010, 2011 Software in the Public Interest
# This file is distributed under the same license as the grub2 package.
#
# Changes:
#   - Initial translation
#   Maria Germana Oliveira Blazetic, 2007
#
#   - Updates
#   Gary Ariel Sandi Vigabriel , 2009
#   Francisco Javier Cuadrado , 2009, 2010, 2011
#
#   - Revisions
#   Innocent De Marchi , 2010
#
# Traductores, si no conocen el formato PO, merece la pena leer la
# documentación de gettext, especialmente las secciones dedicadas a este
# formato, por ejemplo ejecutando:
#   info -n '(gettext)PO Files'
#   info -n '(gettext)Header Entry'
#
# Equipo de traducción al español, por favor lean antes de traducir
# los siguientes documentos:
#
#   - El proyecto de traducción de Debian al español
# http://www.debian.org/intl/spanish/
# especialmente las notas y normas de traducción en
# http://www.debian.org/intl/spanish/notas
#
#   - La guía de traducción de po's de debconf:
# /usr/share/doc/po-debconf/README-trans
# o http://www.debian.org/intl/l10n/po-debconf/README-trans
#
msgid ""
msgstr ""
"Project-Id-Version: grub2 1.99-5\n"
"Report-Msgid-Bugs-To: gr...@packages.debian.org\n"
"POT-Creation-Date: 2011-05-27 13:33+0100\n"
"PO-Revision-Date: 2011-05-28 14:04+0100\n"
"Last-Translator: Francisco Javier Cuadrado \n"
"Language-Team: Debian l10n Spanish \n"
"Language: es\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "Chainload from menu.lst?"
msgstr "¿Desea realizar la carga en cadena desde el archivo «menu.lst»?"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "GRUB upgrade scripts have detected a GRUB Legacy setup in /boot/grub."
msgstr "Los scripts de actualización han detectado en «/boot/grub» una configuración heredada de una versión anterior de GRUB."

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "In order to replace the Legacy version of GRUB in your system, it is recommended that /boot/grub/menu.lst is adjusted to load a GRUB 2 boot image from your existing GRUB Legacy setup. This step can be automatically performed now."
msgstr "Con el fin de reemplazar la versión anterior de GRUB en el sistema, se recomienda configurar «/boot/grub/menu.lst» para que cargue GRUB 2 a partir de la configuración heredada de GRUB. Este paso se puede hacer de forma automática."

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "It's recommended that you accept chainloading GRUB 2 from menu.lst, and verify that the new GRUB 2 setup works before it is written to the MBR (Master Boot Record)."
msgstr "Se recomienda que acepte cargarlo en cadena desde el archivo «menu.lst» y que compruebe el buen funcionamiento del nuevo GRUB 2, antes de instalarlo en el MBR («Master Boot Record»)."

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "Whatever your decision, you can replace the old MBR image with GRUB 2 later by issuing the following command as root:"
msgstr "Sea cual sea su decisión, puede reemplazar la imagen del MBR anterior con GRUB 2 más tarde ejecutando, como administrador («root»), la siguiente orden:"

#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
#: ../grub-pc.templates.in:4001
msgid "GRUB install devices:"
msgstr "Dispositivos en los que se puede instalar GRUB:"

#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
msgid "The grub-pc package is being upgraded. This menu allows you to select which devices you'd like grub-install to be automatically run for, if any."
msgstr "Se está actualizando el paquete grub-pc. Este menú le permite escoger en qué dispositivos quiere ejecutar automáticamente grub-install, si es que quiere."

#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
msgid "Running grub-install automatically is recommended in most situations, to prevent the installed GRUB core image from getting out of sync with GRUB modules or grub.cfg."
msgstr "Se recomienda ejecutar automáticamente grub-install en la mayoría de las situaciones, para evitar que la imagen del núcleo de GRUB instalada no esté sincronizada con los módulos GRUB o con el archivo «grub.cfg»."

#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
#: ../grub-pc.templates.in:4001
msgid "If you're unsure which drive is designated as boot drive by your BIOS, it is often a good idea to install GRUB to all of them."
msgstr "Si no está seguro cuál es la unidad de arranque de la BIOS, normalmente es una buena idea instalar GRUB en todas ellas."

#. Type: multiselect
#. Description
#. Type: multiselect
#. Description
#: ../grub-pc.templates.in:3001
#: ../grub-pc.t

Bug#629634: linux-image-2.6.38-2-amd64: Broken bridge IPv6 forwarding

[Meinhard Schneider]

Package: linux-2.6
Version: 2.6.38-5
Severity: important

Bridge IPv6 forwarding is broken in 2.6.38:
http://www.spinics.net/lists/linux-ethernet-bridging/msg04084.html

Please apply the mentioned patch.

-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-5) (b...@decadent.org.uk) (gcc 
version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Sun May 8 13:51:57 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64 
root=UUID=acb70178-aad0-49ea-911b-727ab468e3ae ro console=tty0 
console=ttyS0,115200n8 vga=0x318

** Not tainted

** Kernel log:
[0.920388] usbcore: registered new interface driver hub
[0.924076] 8139cp :00:06.0: eth0: RTL-8139C+ at 0xc918e000, 
52:54:00:31:ba:d8, IRQ 10
[0.928557] 8139cp :00:06.0: setting latency timer to 64
[0.938644] usbcore: registered new device driver usb
[0.945704] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[0.948948] virtio-pci :00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 
(level, high) -> IRQ 11
[0.964284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[0.974606] libata version 3.00 loaded.
[0.979177] 8139too: 8139too Fast Ethernet driver 0.9.28
[0.990729] uhci_hcd: USB Universal Host Controller Interface driver
[0.996312] virtio-pci :00:04.0: setting latency timer to 64
[0.996416] ata_piix :00:01.1: version 2.13
[0.997707] ata_piix :00:01.1: setting latency timer to 64
[0.998248] scsi0 : ata_piix
[1.002751] scsi1 : ata_piix
[1.006469] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[1.019180] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[1.021812] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[1.028147] virtio-pci :00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 
(level, high) -> IRQ 10
[1.031703] virtio-pci :00:05.0: setting latency timer to 64
[1.031795] uhci_hcd :00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, 
high) -> IRQ 11
[1.035410] uhci_hcd :00:01.2: setting latency timer to 64
[1.035419] uhci_hcd :00:01.2: UHCI Host Controller
[1.048199] uhci_hcd :00:01.2: new USB bus registered, assigned bus 
number 1
[1.050884] uhci_hcd :00:01.2: irq 11, io base 0xc020
[1.059780] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[1.066041] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[1.068729] usb usb1: Product: UHCI Host Controller
[1.070911] usb usb1: Manufacturer: Linux 2.6.38-2-amd64 uhci_hcd
[1.073168] usb usb1: SerialNumber: :00:01.2
[1.077663] hub 1-0:1.0: USB hub found
[1.089476] hub 1-0:1.0: 2 ports detected
[1.140361] virtio-pci :00:04.0: irq 40 for MSI/MSI-X
[1.140390] virtio-pci :00:04.0: irq 41 for MSI/MSI-X
[1.174360]  vda: vda1 vda2 vda3
[1.204358] ata2.01: NODEV after polling detection
[1.204687] ata2.00: ATAPI: QEMU DVD-ROM, 0.14.0, max UDMA/100
[1.208975] ata2.00: configured for MWDMA2
[1.212877] scsi 1:0:0:0: CD-ROMQEMU QEMU DVD-ROM 0.14 
PQ: 0 ANSI: 5
[1.259400] virtio-pci :00:05.0: irq 42 for MSI/MSI-X
[1.259422] virtio-pci :00:05.0: irq 43 for MSI/MSI-X
[1.259442] virtio-pci :00:05.0: irq 44 for MSI/MSI-X
[1.265225] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[1.267975] cdrom: Uniform CD-ROM driver Revision: 3.20
[1.271308] sr 1:0:0:0: Attached scsi CD-ROM sr0
[1.301067] sr 1:0:0:0: Attached scsi generic sg0 type 5
[1.404044] usb 1-1: new full speed USB device using uhci_hcd and address 2
[1.420038] Refined TSC clocksource calibration: 3000.210 MHz.
[1.664781] PM: Starting manual resume from disk
[1.667671] PM: Hibernation image partition 254:1 present
[1.667673] PM: Looking for hibernation image.
[1.667754] PM: Image not found (code -22)
[1.667756] PM: Hibernation image not present or could not be loaded.
[1.694561] EXT3-fs: barriers not enabled
[1.698024] kjournald starting.  Commit interval 5 seconds
[1.700231] EXT3-fs (vda2): mounted filesystem with ordered data mode
[1.705459] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
[1.707886] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[1.710404] usb 1-1: Product: QEMU USB Tablet
[1.712431] usb 1-1: Manufacturer: QEMU 0.14.0
[1.714261] usb 1-1: SerialNumber: 42
[1.780803] input: QEMU 0.14.0 QEMU USB Tablet as 
/devices/pci:00/:00:01.2/usb1/1-1/1-1:1.0/input/input1
[1.784696] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 
Pointer [QEMU 0.14.0 QEMU USB Tablet] on usb-:00:01.2-1/input0
[1.797727] usbcore: registered new interface driver usbhid
[1.808034] usbhid: USB HID core driver
[2.623711] <30>udev[240]: starting version 167
[2.884574] WARNING! power/level is deprecated; use power/control instead
[2.989243] input: PC Speaker as /devices/platform/pcspkr/input/in

Bug#629418: nvidia-glx: PowerMizer doesn't detect change in power source

[Diggory Hardy]

Hi,

I'm sorry but I have no idea how to help with this problem.
> You might consider bugging NVIDIA about it, but don't expect a reaction:
> http://www.nvnews.net/vbulletin/showthread.php?t=46678
>

Fair enough. I did actually already mention this on the nvnews forums
briefly and without response. I guess this just has to be closed as
unsolvable then.

Cheers,
Diggory

Bug#238888: netselect-apt_0.3.ds1-1: generates broken sources.list with no mirrors.

[Trey Blancher]

Here's the output you requested:

heroin:~ # netselect -I -vv -s 1 www.google.com
Running netselect to choose 1 out of 6 addresses.

74.125.115.105 ms  30 hops0% ok
74.125.115.104 ms  30 hops0% ok
74.125.115.103 ms  30 hops0% ok
74.125.115.99  ms  30 hops0% ok
74.125.115.147 ms  30 hops0% ok
74.125.115.106 ms  30 hops0% ok
heroin:~ # netselect -vv -s 1 www.google.com
Running netselect to choose 1 out of 6 addresses.

74.125.115.106  44 ms  13 hops  100% ok (10/10) [  101]
74.125.115.105  43 ms  13 hops  100% ok (10/10) [   98]
74.125.115.104  45 ms  13 hops  100% ok (10/10) [  103]
74.125.115.103  45 ms  13 hops  100% ok (10/10) [  103]
74.125.115.99   44 ms  13 hops  100% ok (10/10) [  101]
74.125.115.147  44 ms  13 hops  100% ok (10/10) [  101]
   98 74.125.115.105

Looks like the ping method is broken from here.  I saw that you made
another release, it doesn't seem to have hit any of the mirrors I've
tried so far.  I will upgrade once it becomes available (in perhaps
the standard ten days), and I will report back.


On Tue, Jun 7, 2011 at 17:42, Javier Fern?ndez-Sanguino Pe?a
 wrote:
> On Wed, Jun 01, 2011 at 11:13:37AM -0500, Trey Blancher wrote:
>>  As far as I know, I'm not experiencing any general networking issues,
>> both ping and traceroute to google com return as expected.  Here's the
>> raw netselect command I ran (hosts.test should be the contents of the
>> $hosts shell variable):
> ()
>> Note there is no actual selection of a mirror.  I did a quick scan of
>> the entire output, and it appears that all of the hosts tested have
>> the same results (i.e. ms 30 hops 0% ok), even after netselect
>> seems to cycle through the list at least twice.  It's as if netselect
>> is not doing either ping or traceroute correctly (as if it's trying a
>> hybrid approach?), and totally failing silently.  As an added bonus,
> (...)
>
> This is weird, since you are using -I you are telling netselect to just use
> ICMP probes (not UDP) which should work with most Debian servers (some
> actually do block traceroute probes).
>
> Please try to run (as root) this: 'netselect -I -vv -s 1 www.google.com'.
>
> Questions:
> - Do you get the same results? (i.e. ms)
> - What happens if you drop the -I call? Any change?
> - Do you see any logs in your kernel's message log when netselect is run?
>  (Check dmesg)
> - Is there any filtering device between your system and the Internet?
>
> On the one hand, netselect-apt is not handling properly the case when
> netselect does not find any suitable server (see bug #23, #420252) and, on
> the other hand, netselect does not seem to work in your environment.
>
> The first issue I can fix, the second one I cannot unless I get more
> information from you.
>
> Regards
>
> Javier
>



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629635: grub-pc: on reboot grub hangs at floppy detect

[Daniel Dickinson]

Package: grub-pc
Version: 1.99~rc1-13
Severity: minor


On an ASUSS M3A78-CM motherboard with SATA drives a floppy booting after a 
completely fresh power-up (e.g. power-supply turned off) work properly, however 
a reboot, or shutdown but not complete powercycle (via back-of-computer power 
supply on-off switch), GRUB reboots at the point where floppy drive detection 
occurs, and on the subsquent reboot hangs at that same spot.  Doing a total 
powercycle fixes the problem.

-- Package-specific info:

*** BEGIN /proc/mounts
/dev/mapper/daniloth-root / ext4 
rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0
/dev/md0 /boot ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/mapper/daniloth-home /home ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/mapper/daniloth-tmp /tmp ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/mapper/daniloth-backups /srv/backups ext4 
rw,relatime,barrier=1,data=ordered 0 0
/dev/mapper/daniloth-var /var ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/mapper/backup_disc_crypt /var/local/backup_disc ext4 
rw,relatime,barrier=1,data=ordered 0 0
*** END /proc/mounts

*** BEGIN /boot/grub/device.map
(hd0)   /dev/disk/by-id/ata-ST32000542AS_6XW27P8T
(hd1)   /dev/disk/by-id/ata-ST32000542AS_6XW259CE
(hd2)   /dev/disk/by-id/usb-MICRONET_FANTOM_DRIVE_4A5032393330485132344155-0:0
(hd3)   /dev/disk/by-id/usb-0930_USB_Flash_Memory_04614470F1E088C6-0:0
*** END /boot/grub/device.map

*** BEGIN /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
  fi
}

function load_video {
  insmod vbe
  insmod vga
  insmod video_bochs
  insmod video_cirrus
}

insmod raid
insmod mdraid1x
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(md/0)'
search --no-floppy --fs-uuid --set=root 14f46b4f-9966-4b86-bd0c-6724e0b04a6c
if loadfont /grub/unicode.pf2 ; then
  set gfxmode=640x480
  load_video
  insmod gfxterm
fi
terminal_output gfxterm
insmod raid
insmod mdraid1x
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(md/0)'
search --no-floppy --fs-uuid --set=root 14f46b4f-9966-4b86-bd0c-6724e0b04a6c
set locale_dir=($root)/grub/locale
set lang=en_CA
insmod gettext
set timeout=5
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod raid
insmod mdraid1x
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(md/0)'
search --no-floppy --fs-uuid --set=root 14f46b4f-9966-4b86-bd0c-6724e0b04a6c
insmod png
if background_image /grub/.background_cache.png; then
  set color_normal=light-gray/black
  set color_highlight=white/black
else
  set menu_color_normal=cyan/blue
  set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Debian GNU/Linux, with Linux 2.6.38-2-amd64' --class debian --class 
gnu-linux --class gnu --class os {
insmod raid
insmod mdraid1x
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(md/0)'
search --no-floppy --fs-uuid --set=root 
14f46b4f-9966-4b86-bd0c-6724e0b04a6c
echo'Loading Linux 2.6.38-2-amd64 ...'
linux   /vmlinuz-2.6.38-2-amd64 root=/dev/mapper/daniloth-root ro  
quiet splash vga=799
echo'Loading initial ramdisk ...'
initrd  /initrd.img-2.6.38-2-amd64
}
menuentry 'Debian GNU/Linux, with Linux 2.6.38-2-amd64 (recovery mode)' --class 
debian --class gnu-linux --class gnu --class os {
insmod raid
insmod mdraid1x
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(md/0)'
search --no-floppy --fs-uuid --set=root 
14f46b4f-9966-4b86-bd0c-6724e0b04a6c
echo'Loading Linux 2.6.38-2-amd64 ...'
linux   /vmlinuz-2.6.38-2-amd64 root=/dev/mapper/daniloth-root ro 
single 
echo'Loading initial ramdisk ...'
initrd  /initrd.img-2.6.38-2-amd64
}
menuentry 'Debian GNU/Linux, with Linux 2.6.32-5-amd64' --class debian --class 
gnu-linux --class gnu --class os {
insmod raid
insmod mdraid1x
insmod part_msdos
insmod part_msdos
insmod ext2
set root='(md/0)'
search --no-floppy --fs-uuid --set=root 
14f46b4f-9966-4b86-bd0c-6724e0b04a6c
echo'Loading Linux 2.6.32-5-amd64 ...'
linux   /vmlinuz-2.6.32-5-amd64 root=/dev/mapper/daniloth-root ro  
quiet splash vga=799
echo'Loading initial ramdisk ...'
initrd  /initrd.img-2.6.

Bug#629636: linux-image-2.6.32-5-kirkwood: IPsec aes-sha1 with kirkwood/mv_cesa causes CPU to spin

[Alexander Clouter]

Package: linux-2.6
Version: 2.6.32-34squeeze1
Severity: normal

Whilst deploying IPsec (with strongswan-ike2) I ran into a complication[1]
that causes mv_cesa to spin the CPU when the system receives an IPsec ESP
packet; it seems to be able to send traffic (before the CPU spin) as a
ICMP Echo request (a la pin) out from the system out is okay, until the
ICMP Reply comes back.  The packet never 'arrives' as far as userspace is
concerned and the only way to stop the CPU spinning is a reboot.

The configuration I have been using is:
 server (Marvell OpenRD) 
conn %default
keyexchange=ikev2
mobike=no
auto=add

conn soas-v6
left=2001:db8:f00:ba4::1
leftprotoport=tcp/echo
right=%any
authby=secret
type=transport

conn soas-v4
left=192.0.2.1
leftprotoport=tcp/echo
right=%any
authby=secret
type=transport

 client (my x86-filth laptop) 
conn %default
keyexchange=ikev2
mobike=no
auto=route

conn soas-v6
left=%defaultroute
right=2001:db8:f00:ba4::1
rightprotoport=tcp/echo
authby=secret
type=transport

conn soas-v4
left=%defaultroute
right=192.0.2.1
rightprotoport=tcp/echo
authby=secret
type=transport


Noticing that IPsec is doing hardware offloading, I looked to see what has
been happening to mv_cesa.c since v2.6.32[2] and nothing stands out other
than 750052dd where SHA1 is enabled (which was backported into 2.6.32)
and there does not seem to be anything bug fixing wise since.

So I tried disabling SHA1 by tinkering with the server side of the
configuration to add:

conn %default
esp=aes-md5


Now using md5, things start to work.  Looks to me as either SHA1 does
not work with IPsec, or when it is combined with at least AES.

If more information is needed then do get intouch.

Cheers

[1] I seem to not be the only one
http://marc.info/?l=linux-crypto-vger&m=130746635214483&w=2
[2] git log v2.6.32..HEAD drivers/crypto/mv_cesa.c

-- Package-specific info:
** Version:
Linux version 2.6.32-5-kirkwood (Debian 2.6.32-34squeeze1) (da...@debian.org) 
(gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Thu May 19 12:56:20 UTC 2011

** Command line:
console=ttyS1,115200 panic=10 ubi.mtd=root kw_openrd_init_uart1=232 
root=ubi0:rootfs rootfstype=ubifs rw

** Tainted: C (1024)
 * Module from drivers/staging has been loaded.

** Kernel log:
[   46.358343] NET: Registered protocol family 15
[   46.372871] alg: No test for cipher_null (cipher_null-generic)
[   46.378824] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[   46.384900] alg: No test for digest_null (digest_null-generic)
[   46.390835] alg: No test for compress_null (compress_null-generic)
[   47.586948] Initializing XFRM netlink socket
[   88.324860] alg: No test for authenc(hmac(md5),cbc(aes)) 
(authenc(hmac(md5-generic),mv-cbc-aes))
[ snipped] ...
[24010.137237] alg: No test for authenc(hmac(sha1),cbc(aes)) 
(authenc(mv-hmac-sha1,mv-cbc-aes))

** Model information
Processor   : Feroceon 88FR131 rev 1 (v5l)
Hardware: Marvell OpenRD Ultimate Board
Revision: 

** Loaded modules:
Module  Size  Used by
xfrm6_mode_tunnel   1474  0 
xfrm4_mode_tunnel   1546  0 
esp64591  0 
xfrm6_mode_transport 1300  0 
authenc 5940  0 
xfrm4_mode_transport 1276  0 
xt_multiport2341  1 
xfrm_user  18561  2 
xfrm4_tunnel1407  0 
tunnel4 2035  1 xfrm4_tunnel
ipcomp  1698  0 
xfrm_ipcomp 3557  1 ipcomp
esp44807  0 
ah4 3703  0 
ctr 3241  0 
twofish 7467  0 
twofish_common 14498  1 twofish
camellia   21397  0 
serpent21417  0 
blowfish8262  0 
cast5  16967  0 
des_generic16617  0 
cbc 2313  0 
xcbc2219  0 
rmd160  8978  0 
sha256_generic  8818  0 
crypto_null 2122  0 
af_key 32325  0 
sd_mod 31340  1 
crc_t10dif  1106  1 sd_mod
crc32c  2562  4 
ib_iser25394  0 
rdma_cm22074  1 ib_iser
ib_cm  34755  1 rdma_cm
iw_cm   6685  1 rdma_cm
ib_sa  16138  2 rdma_cm,ib_cm
ib_mad 33182  2 ib_cm,ib_sa
ib_core40421  6 ib_iser,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mad
ib_addr 4427  1 rdma_cm
iscsi_tcp   7907  2 
libiscsi_tcp   11547  1 iscsi_tcp
libiscsi   28804  3 ib_iser,iscsi_tcp,libiscsi_tcp
scsi_transport_iscsi25876  4 ib_iser,iscsi_tcp,libiscsi
fuse   51372  3 
ip6_tunnel 11756  0 
tunnel6 1866  1 ip6_tunnel
bonding78390  0 
ipv6  253910  52 
xfrm6_mode_tunnel,esp6,ib_addr,ip6_tu

Bug#605803: mirror listing update for debian.fastbull.org

[Fastbull]

-- Original Header ---

From  : "Simon Paillard" spaill...@debian.org
To  : "Fastbull" st...@fastbull.org
Cc  : 605...@bugs.debian.org
Date  : Thu, 2 Jun 2011 22:09:30 +0200
Subject : Re: Bug#605803: mirror listing update for debian.fastbull.org

> Hi,
> 
> On Wed, Dec 15, 2010 at 06:11:54PM +0100, Fastbull wrote:
> > From "Simon Paillard"
> > > No update since 13th Dec ?
> > > http://debian.fastbull.org/debian/project/trace/
> > 
> > thanks for your advice.
> > We had a crontab misconfiguration, now we have tested it and all seems fine.
> 
> FYI, your mirror runs an old version of ftpsync, you can get updates at 
> http://www.debian.org/mirror/ftpmirror#how
> 
> Major announces are sent to http://lists.debian.org/debian-mirrors-announce/
> that you should probably subscribe.
> 
> Best regards.
> 
> -- 
> Simon Paillard
> 

Hi Simon,
thank you.
We have upgraded ftpsync and subscribed to the list.
Regards,
Enrico Camarda




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#622146: Not working...

[Alberto Gonzalez Iniesta]

Ok, got tired of this now. I don't know how it worked a couple of days
ago, I'm not able to get it to work now. Either with 1.9 or 1.9.1.

Only the des-cbc-md5 or des-cbc-crc keys in the client's keytab, with both:
allow_weak_crypto = yes
permitted_enctypes = des-cbc-(md5|crc)

Or just with allow_weak_crypto

No way to mount, with the known errors on the server.
I'll play with this again in some days, sshfs will do the job for the
time being.


-- 
Alberto Gonzalez Iniesta| Formación, consultoría y soporte técnico
agi@(inittab.org|debian.org)| en GNU/Linux y software libre
Encrypted mail preferred| http://inittab.com

Key fingerprint = 9782 04E7 2B75 405C F5E9  0C81 C514 AF8E 4BA4 01C3



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629637: add option to create swap file in image

[Colin Watson]

Package: live-build
Version: 3.0~a18-1
Severity: wishlist
Tags: patch
User: ubuntu-de...@lists.ubuntu.com
Usertags: origin-ubuntu ubuntu-patch oneiric

livecd-rootfs has a facility to create an empty swap file on ext2/ext3
images, which Ubuntu's boot scripts then deal with using or deleting as
appropriate at the first boot.  Apparently this cuts three minutes off
the boot time of our preinstalled (jasper-based) images on ARM.

This seems like a sufficiently useful facility (at least relative to
ext2/ext3 images) that it would be nice to have it as options rather
than hooks.  Patch attached.

Thanks,

-- 
Colin Watson   [cjwat...@ubuntu.com]
>From 5ae2040d7c8470d7488993e0069d827e56aa8be5 Mon Sep 17 00:00:00 2001
From: Colin Watson 
Date: Wed, 8 Jun 2011 11:30:29 +0100
Subject: [PATCH] Add --swap-file-path and --swap-file-size options.

---
 functions/defaults.sh |3 +++
 manpages/en/lb_config.1   |4 
 scripts/build/lb_chroot_hacks |5 +
 scripts/build/lb_config   |   22 +-
 4 files changed, 33 insertions(+), 1 deletions(-)

diff --git a/functions/defaults.sh b/functions/defaults.sh
index e26f1ac..7c9d288 100755
--- a/functions/defaults.sh
+++ b/functions/defaults.sh
@@ -1102,6 +1102,9 @@ Set_defaults ()
 			;;
 	esac
 
+	# Setting swap file
+	LB_SWAP_FILE_SIZE="${LB_SWAP_FILE_SIZE:-512}"
+
 	## config/source
 
 	# Setting source option
diff --git a/manpages/en/lb_config.1 b/manpages/en/lb_config.1
index f1204b0..9e2f858 100644
--- a/manpages/en/lb_config.1
+++ b/manpages/en/lb_config.1
@@ -474,6 +474,10 @@ defines if the security repositories specified in the security mirror options sh
 defines if a corresponding source image to the binary image should be build. By default this is false because most people do not require this and would require to download quite a few source packages. However, once you start distributing your live image, you should make sure you build it with a source image alongside.
 .IP "\-s|\fB\-\-source\-images\fR iso|net|tar|usb\-hdd" 4
 defines the image type for the source image. Default is tar.
+.IP "\fB\-\-swap\-file\-path\fR \fIPATH\fR" 4
+defines the path to a swap file to create in the binary image. Default is not to create a swap file.
+.IP "\fB\-\-swap\-file\-size\fR \fIMB\fR" 4
+defines what size in megabytes the swap file should be, if one is to be created. Default is 512MB.
 .IP "\fB\-\-syslinux\-splash\fR \fIFILE\fR" 4
 defines the file of the syslinux splash graphic that should be used instead of the default one.
 .IP "\fB\-\-syslinux\-timeout\fR \fISECONDS\fR" 4
diff --git a/scripts/build/lb_chroot_hacks b/scripts/build/lb_chroot_hacks
index bbb39ce..f9e11dd 100755
--- a/scripts/build/lb_chroot_hacks
+++ b/scripts/build/lb_chroot_hacks
@@ -314,6 +314,11 @@ then
 	ln -s /proc/mounts chroot/etc/mtab
 fi
 
+if [ "${LB_SWAP_FILE_PATH}" ]; then
+	dd if=/dev/zero of="chroot/${LB_SWAP_FILE_PATH}" bs=1024k count="${LB_SWAP_FILE_SIZE}"
+	mkswap "chroot/${LB_SWAP_FILE_PATH}"
+fi
+
 # Show popular warnings
 if [ -e chroot/etc/init.d/resolvconf ]
 then
diff --git a/scripts/build/lb_config b/scripts/build/lb_config
index 2f49557..f129255 100755
--- a/scripts/build/lb_config
+++ b/scripts/build/lb_config
@@ -135,6 +135,8 @@ USAGE="${PROGRAM}   [--apt apt|aptitude]\n\
 \t[--security true|false]\n\
 \t[--source true|false]\n\
 \t[-s|--source-images iso|net|tar|usb-hdd]\n\
+\t[--swap-file-path PATH]\n\
+\t[--swap-file-size MB]\n\
 \t[--syslinux-theme THEME_SUFFIX]\n\
 \t[--tasksel apt|aptitude|tasksel]\n\
 \t[--tasks TASK|\"TASKS\"]\n\
@@ -166,7 +168,7 @@ Local_arguments ()
 		grub-splash:,hostname:,isohybrid-options:,iso-application:,iso-preparer:,iso-publisher:,
 		iso-volume:,jffs2-eraseblock:,memtest:,net-root-filesystem:,net-root-mountoptions:,
 		net-root-path:,net-root-server:,net-cow-filesystem:,net-cow-mountoptions:,net-cow-path:,
-		net-cow-server:,net-tarball:,syslinux-theme:,
+		net-cow-server:,net-tarball:,swap-file-path:,swap-file-size:,syslinux-theme:,
 		username:,win32-loader:,source:,source-images:,breakpoints,conffile:,debug,force,
 		help,ignore-system-defaults,quiet,usage,verbose,version"
 	# Remove spaces added by indentation
@@ -754,6 +756,16 @@ Local_arguments ()
 shift 2
 ;;
 
+			--swap-file-path)
+LB_SWAP_FILE_PATH="${2}"
+shift 2
+;;
+
+			--swap-file-size)
+LB_SWAP_FILE_SIZE="${2}"
+shift 2
+;;
+
 			--syslinux-theme)
 LB_SYSLINUX_THEME="${2}"
 shift 2
@@ -1375,6 +1387,14 @@ LB_NET_COW_SERVER="${LB_NET_COW_SERVER}"
 # (Default: ${LB_NET_TARBALL})
 LB_NET_TARBALL="${LB_NET_TARBALL}"
 
+# \$LB_SWAP_FILE_PATH: set swap file path
+# (Default: ${LB_SWAP_FILE_PATH})
+LB_SWAP_FILE_PATH="${LB_SWAP_FILE_PATH}"
+
+# \$LB_SWAP_FILE_SIZE: set swap file size
+# (Default: ${LB_SWAP_FILE_SIZE})
+LB_SWAP_FILE_SIZE="${LB_SWAP_FILE_SIZE}"
+
 # \$LB_SYSLINUX_THEME: set syslinux theme package
 # (Default: ${LB_SYSLINUX_

Bug#583483: Bug#610888: libpam-ldap: allow any LDAP users even when pam_check_host_attr

[Luca Capello]

Hi Steve!

On Wed, 08 Jun 2011 09:14:08 +0200, Steve Langasek wrote:
> On Sun, Jan 23, 2011 at 08:17:03PM +0100, Luca Capello wrote:
>> On sid, however, while I was quite happy than I had nothing to touch to
>> have LDAP authentication working automatically by default, the
>> libpam-ldap's pam_check_host_attr seems to not work at all:
[...]
>> I read the PAM documentation, but I still do not understand what is
>> wrong with the default configuration.  Could this be related to
>> ?  I guess so, given that libpam-ldapd's
>> pam.d/common-account configuration works as expected, with the big
>> difference being that the pam_ldap's profile is Additional and not
>> Primary:
>
> I think this is the same as bug #583483; merging.

Thank you for the follow-up.

> While I'm still weighing whether to change pam_unix for bug #583492, it is
> definitely the case that pam_ldap's authorization checks should be
> 'Additional' and not 'Primary' because, as seen here, they are intended to
> always be applied *in addition* to any authorization checks from other
> modules.

Mmm, again, I am not a PAM expert, but the above is not true *if* it is
possible to not have any pam_unix (or any other 'Primary' module) checks
at all, thus relying on pam_ldap only.  Obviously, this applies to
libpam-ldapd as well.

Anyway, I leave all this stuff to more experienced people and stay quiet
unless asked for :-)

Thx, bye,
Gismo / Luca


pgpqfGCbWQGdF.pgp
Description: PGP signature

Bug#629638: lighttpd: lighty-enable-mod should return non-zero on fail

[Jon Dowland]

Package: lighttpd
Version: 1.4.28-2
Severity: normal

root@pris:/etc/lighttpd# lighttpd-enable-mod fakemodule
Available modules: auth accesslog cgi evasive evhost expire fastcgi 
flv-streaming no-www proxy rrdtool simple-vhost ssi ssl status userdir 
usertrack fastcgi-php debian-doc 
Already enabled modules: dowland.me iw.debian joe jon_vhosts pch_vhosts redmars 
tom_vhosts 
Run /etc/init.d/lighttpd force-reload to enable changes
root@pris:/etc/lighttpd# echo $?
0

this mucks up calling lighttd-enable-mod from a configuration management
tool such as puppet, requiring you to perform further checks to make sure
a symlink is in place.

-- System Information:
Debian Release: 6.0.1
  APT prefers stable
  APT policy: (700, 'stable'), (600, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages lighttpd depends on:
ii  libattr11:2.4.44-2   Extended attribute shared library
ii  libbz2-1.0  1.0.5-6  high-quality block-sorting file co
ii  libc6   2.11.2-10Embedded GNU C Library: Shared lib
ii  libfam0 2.7.0-17 Client library to control the FAM 
ii  libldap-2.4-2   2.4.23-7 OpenLDAP libraries
ii  libpcre38.12-3   Perl 5 Compatible Regular Expressi
ii  libssl0.9.8 0.9.8o-4squeeze1 SSL shared libraries
ii  libterm-readline-perl-p 1.0303-1 Perl implementation of Readline li
ii  lsb-base3.2-23.2squeeze1 Linux Standard Base 3.2 init scrip
ii  mime-support3.48-1   MIME files 'mime.types' & 'mailcap
ii  zlib1g  1:1.2.3.4.dfsg-3 compression library - runtime

Versions of packages lighttpd recommends:
ii  spawn-fcgi1.6.3-1A fastcgi process spawner

Versions of packages lighttpd suggests:
ii  apache2-utils  2.2.16-6+squeeze1 utility programs for webservers
ii  openssl0.9.8o-4squeeze1  Secure Socket Layer (SSL) binary a
pn  rrdtool(no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629639: cycle: Translation error in legend

[Meike Reichle]

Package: cycle
Version: 0.3.1-7
Severity: minor
Tags: l10n

There is a small translation error in the German version of cycle, more
specifically in the colour legend. Where it says "ovulation, birth" in the
English version, the German version only says "Geburt" ("birth"). Because
of this omission the calendar practically tells me I'll have a baby every
month for the foreseeable future, which is somewhat disconcerting news ;)

The correct translation would be "Eisprung, Geburt".

No biggie but may be worth fixing in the next version.

-- System Information:
Debian Release: wheezy/sid
  APT prefers stable
  APT policy: (600, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-3-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash

Versions of packages cycle depends on:
ii  python2.6.6-14   interactive high-level object-orie
ii  python-support1.0.13 automated rebuilding support for P
ii  python-wxgtk2.6   2.6.3.2.2-5+b2 wxWidgets Cross-platform C++ GUI t

cycle recommends no packages.

cycle suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#625541: nvidia-glx: Screen blacking out as a result of mouse movement, scrolling & clicks

[Andy Chittenden]

Ø  On 2011-05-29 09:44, Andreas Beckmann wrote:

Ø  > Two new driver versions are available:

Ø  >   * 270.41.19-1 (release) in unstable

Ø* 275.09.04-1 (beta) in experimental, this fixes some regressions with KDE

Ø  > Please try them.

I moved on to different hardware so cannot say whether that’s fixed my problem 
or not. The problem doesn’t reproduce on the new hardware but I don’t know 
whether that’s a function of these updates or the different nvidia h/w.



--

Andy, BlueArc Engineering

Bug#615479: status?

[Andy Wingo]

What is the status here?  libgc does appear to be in testing now.

Andy
-- 
http://wingolog.org/



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629640: check_ping: should fall back to IPv4 if IPv6 is not available

[Chris Butler]

Package: nagios-plugins
Version: 1.4.15-3
Severity: minor

When neither the -4 nor -6 options are specified on the command-line, one
would expect the check_ping plugin to try both (as most programs do).
Instead, if it finds an  record for the hostname given, it will *only*
try IPv6, and fail if no IPv6 connectivity is available.

e.g. on a fully dual-stacked host:

chrisb@cob:~$ /usr/lib/nagios/plugins/check_ping -H www.google.co.uk -w 
3000.0,80% -c 5000.0,100% -p 1
PING OK - Packet loss = 0%, RTA = 19.56 
ms|rta=19.555000ms;3000.00;5000.00;0.00 pl=0%;80;100;0

but on a machine with IPv4 only:

chrisb@squeeze-vm:~$ /usr/lib/nagios/plugins/check_ping -H www.google.co.uk -w 
3000.0,80% -c 5000.0,100% -p 1
CRITICAL - Network Unreachable (www.google.co.uk)


We noticed this earlier today, when Google started publishing an  record
for www.google.co.uk et al. Happy IPv6 day ;)

I realise this testcase may stop working after today, but any host that
publishes both A and  records should do (e.g. ftp.uk.debian.org)

Set to 'minor' severity, since using the -4 and -6 options works, and if
you're specifically testing for v4/v6 connectivity you'd be using them.

-- System Information:
Debian Release: 6.0.1
  APT prefers stable
  APT policy: (990, 'stable'), (500, 'proposed-updates')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-openvz-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL 
set to en_GB.UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages nagios-plugins depends on:
ii  nagios-plugins-basic  1.4.15-3   Plugins for the nagios network mon
ii  nagios-plugins-standard   1.4.15-3   Plugins for the nagios network mon

nagios-plugins recommends no packages.

Versions of packages nagios-plugins suggests:
ii  nagios3   3.2.1-2A host/service/network monitoring 

-- no debconf information

-- 
Chris Butler 
  GnuPG Key ID: 4096R/49E3ACD3



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629632: Corrected solution

[Németh Csaba]

Corrected solution

IF_METRIC=1
for router in $new_routers; do
 metric_arg="metric $IF_METRIC"
 route add default dev $interface gw $router $metric_arg
 IF_METRIC=$(( $IF_METRIC+1 ))
done



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#610716: updated patch for tirpc on GNU/kFreeBSD

[Robert Millan]

tags 610716 pending
thanks

2011/6/7 Petr Salinger :
> tags 610716 +patch
> --
>
> Attached please find proposed patch against 0.2.2-2.

I've uploaded an NMU to DELAYED/15 with Petr's patch.  Steinar,
please consider uploading earlier if you have time to review it.

-- 
Robert Millan



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629641: ITP: filo -- FILe and stream Operations

[Charles Plessy]

Package: wnpp
Severity: wishlist
Owner: Charles Plessy 

  Package name: filo
  Version : 1.1.0
  Upstream Author : Aaron Quinlan, University of Virginia; Assaf Gordon, Cold 
Spring Harbor Laboratories
  URL : https://github.com/arq5x/filo
  License : GPL-2.0
  Programming Lang: C++
  Description : FILe and stream Operations

 The following tools are available as part of the filo package:
 .
 groupBy is a useful tool that mimics the "groupBy" clause in database
 systems.
 .
 shuffle will randomize the order of lines in a file. In other words,
 if you have a sorted file, shuffle will undo the sort.
 .
 stats is a small utility for computing descriptive statistic on a
 given column of a tab-delimited file or stream.

groupBy is a command that was formerly part of the BEDtools package
for bioinformatics, very recently accepted in Debian, and that its
users will probably miss if it is not available.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#617763: Bug#629207: metacity: Missing window control buttons

[Josselin Mouette]

Le mercredi 08 juin 2011 à 10:21 +0200, Daniel Huhardeaux a écrit : 
> FYI I already opened a bug about this problem against compiz-gtk in 
> march. See bug 617763

In any case this needs fixing in compiz. I’ll add the necessary Breaks
in libmetacity-private0 when compiz is fixed, but this is what you get
for using internal interfaces in other applications.

-- 
 .''`.  Josselin Mouette
: :' :
`. `'
  `-




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629591: python-nifti: datatype COMPLEX64 not supported

[Michael Hanke]

Hi,

On Wed, Jun 08, 2011 at 12:04:13AM +0200, Arthur Magill wrote:
> Package: python-nifti
> Version: 0.20100607.1-3
> Severity: normal
> 
> Datatype COMPLEX64 is not supported. However, this issue was patched upstream
> here:
> 
> http://anonscm.debian.org/gitweb/?p=pkg-
> exppsy/pynifti.git;a=commit;h=f33a5268671a72d88f80b6a4ed9707064799af73
> 
> Some of the patch appears to have made it into the debian package, but not all
> of it. clib.py has been updated (grep COMPLEX64
> /usr/share/pyshared/nifti/clib.py), but utils.py has not. I'm not sure how 
> this
> might have happened?

Thanks for the report. I'll take a look. However, I'd like to recommend
that you take a look at NiBabel (python-nibabel) that is the successor
of pynifti. It is much more versatile.

Michael

-- 
Michael Hanke
http://mih.voxindeserto.de



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629630: iproute: New 'tuntap' object isn't documented in ip's man page

[Andreas Henriksson]

Hello Fred!

On Wed, Jun 08, 2011 at 11:24:37AM +0200, Frederic Boiteux wrote:
>   It could be nice to have it documented in 'ip' manual page.

The documentation is in real need of lots of improvements for sure.
Any help would be greatly appreciated! ;)

-- 
Andreas Henriksson



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629642: ITP: libtest-spec-perl -- Perl module to write tests in a declarative specification style

[Alessandro Ghedini]

Package: wnpp
Severity: wishlist
Owner: Alessandro Ghedini 

* Package name: libtest-spec-perl
  Version : 0.31
  Upstream Author : Philip Garrett 
* URL : http://search.cpan.org/dist/Test-Spec/
* License : Artistic or GPL-1+
  Programming Lang: Perl
  Description : Perl module to write tests in a declarative specification 
style

This is a declarative specification-style testing system for behavior-driven
development (BDD) in Perl. The tests (a.k.a. examples) are named with strings
instead of subroutine names, so your fingers will suffer less fatigue from
underscore-itis, with the side benefit that the test reports are more
legible.

Test::Spec is inspired by and borrows heavily from RSpec, a BDD tool for the
Ruby programming language.

Note that this is a build dependency of the new version of perlbrew.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#628125: Can not install 6.0.1 on PC Sempron 2600

[jastra]

Good Afternoon,

I have replaced processor and i have passed installation of base 
system from CD1 of Debian 6.0.1


However, when I have tried Debian LiveCD it hangs with "corruped kernel 
image" message.


In general: thanks Your advice, I have replaced processor first time in my 
life and it was nice educational experience. Now I am downloading files 
for making system workable and everything seems going well.


Have a nice day :-)
With Best Regards
Barbara Glowacka


On Mon, 30 May 2011, jas...@jastra.com.pl wrote:


Good Morning,

Thanks for information.
RAM is new, so I will try to replace processor and see result.

Best Regards
Barbara Glowacka

On Fri, 27 May 2011, Lennart Sorensen wrote:


On Fri, May 27, 2011 at 02:44:33PM +0200, jas...@jastra.com.pl wrote:

package: installation-reports

I can not install Debian stable neither 5.0.8 nor 6.0.1, neither
from netinst, nor from CD set.

I have tried both automatic and expert installators.
Standard problems are segmentation faults on installation of base
system in various places. I have succeeded to pass the process with
5.0.8 once, but system was not able to boot. while installing 6.0.1
netinst there is not resolved dependency problem during
configuration.

In another attempts installation just hangs with dead keyboard and
flashing together lights Caps Lock and Scroll Lock during base
system installation. Only hard reset helps.

Debian 6 live DVD gnome just hangs on not finding correct kernel

Sorry for so general description - there has been several days
attempts to install, without any success and without any reasonable
signal of hardware failure...

I am afraid, it is not hardware issue - I have just installed
Knoppix 6 on this machine without any problems
(I am writing this on this newly installed Knoppix).


It sounds a lot like bad RAM or maybe other hardware.  I have seen 
Windows

install happily on a machine that couldn't even get past the bogomips
calibration loop on linux.  Replaced the CPU and the machine worked 
fine.

Windows installed and ran (although crashed frequently, although the
owner of the machine didn't think that was unusual for some reason).

Software only segfaults if it has a major bug (in which case it 
segfaults

consistently in most cases), or if the ram or cpu is corrupting memory
(which I suspect is what you are seeing).


Machine:

cat /proc/cpuinfo
processor   : 0
vendor_id   : AuthenticAMD
cpu family  : 6
model   : 8
model name  : AMD Sempron(tm) 2600+
stepping: 1
cpu MHz : 1834.621
cache size  : 256 KB
fdiv_bug: no
hlt_bug : no
f00f_bug: no
coma_bug: no
fpu : yes
fpu_exception   : yes
cpuid level : 1
wp  : yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr 
pge mca

cmov pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow up
bogomips: 3670.12
clflush size: 32
cache_alignment : 32
address sizes   : 34 bits physical, 32 bits virtual
power management: ts

cat /proc/meminfo
MemTotal: 512444 kB
MemFree:  302400 kB
Buffers:   12264 kB
Cached:   135156 kB
SwapCached:0 kB
Active:98836 kB
Inactive:  92096 kB
Active(anon):  44780 kB
Inactive(anon):0 kB
Active(file):  54056 kB
Inactive(file):92096 kB
Unevictable:   0 kB
Mlocked:   0 kB
HighTotal: 0 kB
HighFree:  0 kB
LowTotal: 512444 kB
LowFree:  302400 kB
SwapTotal:   1052248 kB
SwapFree:1052248 kB
Dirty:16 kB
Writeback: 0 kB
AnonPages: 43512 kB
Mapped:24664 kB
Shmem:  1268 kB
Slab:  12028 kB
SReclaimable:   6524 kB
SUnreclaim: 5504 kB
KernelStack:1224 kB
PageTables: 2184 kB
NFS_Unstable:  0 kB
Bounce:0 kB
WritebackTmp:  0 kB
CommitLimit: 1308468 kB
Committed_AS:  84000 kB
VmallocTotal: 507960 kB
VmallocUsed:9752 kB
VmallocChunk: 491764 kB
HugePages_Total:   0
HugePages_Free:0
HugePages_Rsvd:0
HugePages_Surp:0
Hugepagesize:   4096 kB
DirectMap4k:   12224 kB
DirectMap4M:  512000 kB

fdisk -l

Disk /dev/sda: 164.7 GB, 16469620 bytes
255 heads, 63 sectors/track, 20023 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x

   Device Boot  Start End  Blocks   Id  System
/dev/sda1   1 131 1052257   82  Linux swap /
Solaris
/dev/sda2   * 132   20023   159782490   83  Linux

lspci -knn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT8377
[KT400/KT600 AGP] Host Bridge [1106:3189] (rev 80)
Subsystem: VIA Technologies, Inc. KT4AV motherboard (KT400A)
[1106:]
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI
Bridge [1106:b198]
00:07.0 Network contr

Bug#601803: patch for wireless support

[Robert Millan]

tags 601803 patch
unblock 601803 by 629521
thanks

Here's a patch to enable wireless support.

As for libjail it's not really necessary; the Makefile layout
is confusing which lead Timo to think it was.

libjail is used for "ifconfig vnet" (see manpage) feature
which has nothing to do with wireless support.

Guillem, do you think either of the header kludges I'm
adding with this patch would be suitable for libbsd?

-- 
Robert Millan
diff -Nur a/freebsd-utils-8.2/debian/control b/freebsd-utils-8.2/debian/control
--- a/freebsd-utils-8.2/debian/control  2011-05-30 22:33:26.0 +0200
+++ b/freebsd-utils-8.2/debian/control  2011-06-08 13:19:35.632254657 +0200
@@ -26,7 +26,9 @@
 # libcam-dev: camcontrol
  libcam-dev (>= 8.2),
 # libedit-dev: pppctl
- libedit-dev
+ libedit-dev,
+# libexpat1-dev: ifconfig
+ libexpat1-dev,
 Vcs-Browser: http://svn.debian.org/wsvn/glibc-bsd/trunk/freebsd-utils/
 Vcs-Svn: svn://svn.debian.org/glibc-bsd/trunk/freebsd-utils/
 Standards-Version: 3.9.2
diff -Nur a/freebsd-utils-8.2/debian/local/include/bsdxml.h 
b/freebsd-utils-8.2/debian/local/include/bsdxml.h
--- a/freebsd-utils-8.2/debian/local/include/bsdxml.h   1970-01-01 
01:00:00.0 +0100
+++ b/freebsd-utils-8.2/debian/local/include/bsdxml.h   2011-06-08 
13:19:35.633352283 +0200
@@ -0,0 +1 @@
+#include 
diff -Nur a/freebsd-utils-8.2/debian/local/include/sys/cdefs.h 
b/freebsd-utils-8.2/debian/local/include/sys/cdefs.h
--- a/freebsd-utils-8.2/debian/local/include/sys/cdefs.h1970-01-01 
01:00:00.0 +0100
+++ b/freebsd-utils-8.2/debian/local/include/sys/cdefs.h2011-06-08 
13:19:35.635216207 +0200
@@ -0,0 +1,3 @@
+#include_next 
+#include 
+#define __DECONST(type, var)   ((type) var)
diff -Nur a/freebsd-utils-8.2/debian/patches/032_wireless.diff 
b/freebsd-utils-8.2/debian/patches/032_wireless.diff
--- a/freebsd-utils-8.2/debian/patches/032_wireless.diff1970-01-01 
01:00:00.0 +0100
+++ b/freebsd-utils-8.2/debian/patches/032_wireless.diff2011-06-08 
13:18:32.259527397 +0200
@@ -0,0 +1,14 @@
+--- a/sbin/ifconfig/Makefile
 b/sbin/ifconfig/Makefile
+@@ -27,9 +27,10 @@
+ #SRCS+=   ifgre.c # GRE keys etc
+ SRCS+=ifgif.c # GIF reversed header workaround
+ 
+-#SRCS+=   ifieee80211.c regdomain.c # SIOC[GS]IEEE80211 support
++SRCS+=ifieee80211.c regdomain.c # SIOC[GS]IEEE80211 support
+ #DPADD+=  ${LIBBSDXML} ${LIBSBUF} ${LIBJAIL}
+ #LDADD+=  -lbsdxml -ljail -lsbuf
++LDADD+=   -lexpat -lsbuf
+ 
+ #SRCS+=   ifcarp.c# SIOC[GS]VH support
+ #SRCS+=   ifgroup.c   # ...
diff -Nur a/freebsd-utils-8.2/debian/patches/series 
b/freebsd-utils-8.2/debian/patches/series
--- a/freebsd-utils-8.2/debian/patches/series   2011-05-30 22:40:51.0 
+0200
+++ b/freebsd-utils-8.2/debian/patches/series   2011-06-08 13:19:08.119469653 
+0200
@@ -28,3 +28,4 @@
 029_arp.diff
 030_arp_libbsd.diff
 031_savecore.diff
+032_wireless.diff
diff -Nur a/freebsd-utils-8.2/debian/rules b/freebsd-utils-8.2/debian/rules
--- a/freebsd-utils-8.2/debian/rules2011-05-30 22:33:26.0 +0200
+++ b/freebsd-utils-8.2/debian/rules2011-06-08 13:19:35.636624766 +0200
@@ -5,8 +5,8 @@
 # Uncomment this to turn on verbose mode.
 #export DH_VERBOSE=1
 
-CFLAGS = -Wall -g -pipe -fPIC -I. -D_GNU_SOURCE -D'__FBSDID(string)='
-CXXFLAGS = -Wall -g -pipe -fPIC -I. -D_GNU_SOURCE -D'__FBSDID(string)='
+CFLAGS = -Wall -g -pipe -fPIC -I. -D_GNU_SOURCE -D'__FBSDID(string)=' 
-D__va_list=__builtin_va_list
+CXXFLAGS = -Wall -g -pipe -fPIC -I. -D_GNU_SOURCE -D'__FBSDID(string)=' 
-D__va_list=__builtin_va_list
 
 ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS)))
CFLAGS += -O0

Bug#629521: libjail1-udeb

[Robert Millan]

libjail1-udeb might not be necessary.  I only added it because
I thought it was a requirement for ifconfig.  See #601803.

-- 
Robert Millan



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629594: clang calls linker with wrong args -> crt*.o searched in $pwd

[Michael Wild]

This is caused by a recent modification in libc6-dev (source eglibc),
presumably for multi-arch support. Attached patch teaches Clang to
search these directories. However, I suspect that it will break sooner
or later again when one does "cross-compiling" with -m64 or -m32 on i386
and amd64, respectively, because the "foreign" crt*.o files haven't been
moved yet. Don't know whether they ever will be moved, though, but logic
and some hunch tells me so...

Michael
diff -Nru clang-2.9/debian/changelog clang-2.9/debian/changelog
--- clang-2.9/debian/changelog	2011-06-06 09:55:44.0 +
+++ clang-2.9/debian/changelog	2011-06-08 07:57:58.0 +
@@ -1,3 +1,11 @@
+clang (2.9-2+nmu1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * debian/patches/11-searchMultiArchLibDir.patch: Adds the multi-arch library
+directory to the file search path (Closes: #629594)
+
+ -- Michael Wild   Wed, 08 Jun 2011 09:54:43 +0200
+
 clang (2.9-2) unstable; urgency=low
 
   [ Michael Wild ]
diff -Nru clang-2.9/debian/patches/11-searchMultiArchLibDir.patch clang-2.9/debian/patches/11-searchMultiArchLibDir.patch
--- clang-2.9/debian/patches/11-searchMultiArchLibDir.patch	1970-01-01 00:00:00.0 +
+++ clang-2.9/debian/patches/11-searchMultiArchLibDir.patch	2011-06-08 08:14:24.0 +
@@ -0,0 +1,30 @@
+---
+ ToolChains.cpp |8 
+ 1 file changed, 8 insertions(+)
+
+Description: Add the multi-arch lib directory to the file search path
+ Otherwise Clang is not able to find crt*.o.
+
+Author: Michael Wild 
+Bug: http://llvm.org/bugs/show_bug.cgi?id=10100
+Bug-Debian: http://bugs.debian.org/629594
+Forwarded: http://llvm.org/bugs/attachment.cgi?id=6711
+Last-Update: 2011-06-08
+
+--- clang-2.9.orig/tools/clang/lib/Driver/ToolChains.cpp
 clang-2.9/tools/clang/lib/Driver/ToolChains.cpp
+@@ -1531,6 +1531,14 @@ Linux::Linux(const HostInfo &Host, const
+   Paths.push_back(Base + "/../../..");
+   if (Arch == getArch() && IsUbuntu(Distro))
+ Paths.push_back("/usr/lib/" + GccTriple);
++  if (Distro == DebianWheezy && Arch == getArch())
++  {
++if (!llvm::sys::fs::exists("/usr/lib/" + GccTriple + "/crt1.o", Exists) && Exists)
++  Paths.push_back("/usr/lib/" + GccTriple);
++else if (Is32Bits &&
++!llvm::sys::fs::exists("/usr/lib/i386-linux-gnu/crt1.o", Exists) && Exists)
++  Paths.push_back("/usr/lib/i386-linux-gnu");
++  }
+ }
+ 
+ bool Linux::HasNativeLLVMSupport() const {

Bug#629643: gitit: File upload bug in upstream version 0.8

[Florian Baumann]

Package: gitit
Version: 0.8
Severity: normal
Tags: upstream


In the actual packaged version a bug appears by uploading files.
You are not able to upload _any_ file to the wiki. 

Error Message from Happstack (see gitit-discuss group:
http://groups.google.com/group/gitit-discuss/browse_thread/thread/cd673a0ea4d36093/58c9a257deee8826?hl=en#58c9a257deee8826
 )

Server error: examplefile.txt: canonicalizePath: does not exist (No
such file or directory) 

Bug is already fixed in upstream version 0.8.1 and 
needs to be in debian package.


-- System Information:
Debian Release: 6.0.1
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#610716: updated patch for tirpc on GNU/kFreeBSD

[Steinar H. Gunderson]

On Wed, Jun 08, 2011 at 12:57:45PM +0200, Robert Millan wrote:
> I've uploaded an NMU to DELAYED/15 with Petr's patch.  Steinar,
> please consider uploading earlier if you have time to review it.

I'm fine with NMU, although I haven't looked at the patch.

/* Steinar */
-- 
Homepage: http://www.sesse.net/



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629644: gnome-session: Startup Applications run twice

[Damian Fijorek]

Package: gnome-session
Version: 2.30.2-3
Severity: normal

After the upgrade of gnome-session my Startup Applications run twice. This
affects only applications added to the list of Startup Applications by me.

I have removed those apps from the list. Now they run only once but they are
not listed in Sessions Preferences - Startup Programs tab.



-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=pl_PL.utf8, LC_CTYPE=pl_PL.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages gnome-session depends on:
ii  gnome-panel   2.30.2-4   launcher and docking facility for 
ii  gnome-session-bin 2.30.2-3   The GNOME Session Manager - Minima
ii  gnome-session-common  2.30.2-3   Common files for the GNOME session
ii  gnome-settings-daemon 2.30.2-3   daemon handling the GNOME session 
ii  metacity  1:2.30.1-3 lightweight GTK+ window manager
ii  nautilus  2.30.1-3   file manager and graphical shell f
ii  policykit-1-gnome 0.101-2GNOME authentication agent for Pol

Versions of packages gnome-session recommends:
ii  gnome-power-manager   2.32.0-2   power management tool for the GNOM

Versions of packages gnome-session suggests:
ii  desktop-base  6.0.6  common files for the Debian Deskto
ii  gnome-keyring 3.0.0-3GNOME keyring services (daemon and
pn  gnome-user-guide   (no description available)

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629645: bugs.debian.org: 404 on http://bugs.debian.org/cgi/search.cgi

[John Feuerstein]

Package: www.debian.org
Severity: normal

The following link on http://bugs.debian.org/ is broken and shows HTTP
404 Not Found:


Searching bug reports

You can search bug reports using our HyperEstraier based search
engine[1].


[1] http://bugs.debian.org/cgi/search.cgi


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.0.0-rc1-v1 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629641: ITP: filo -- FILe and stream Operations

[Andrey Rahmatullin]

On Wed, Jun 08, 2011 at 08:02:34PM +0900, Charles Plessy wrote:
>  shuffle will randomize the order of lines in a file. In other words,
>  if you have a sorted file, shuffle will undo the sort.
sort -R
Also, biosquid package contains /usr/bin/shuffle.

>  stats is a small utility for computing descriptive statistic on a
>  given column of a tab-delimited file or stream.
I think this binary name is too generic.

-- 
WBR, wRAR


signature.asc
Description: Digital signature

Bug#629646: vpnc: patch to support Fritz!Box VPN servers

[Florian Echtler]

Package: vpnc
Version: 0.5.3r449-2.1ubuntu1
Severity: normal
Tags: patch

VPNC doesn't offer support for draft-ietf-ipsec-nat-t-ike-03, which is
required by the Fritz!Box series of home routers. This patch adds
support for that feature so that VPNC can connect to these routers.
Also, the default timeout is lowered to 3600 seconds (also required by
Fritz!Boxes).

-- System Information:
Debian Release: squeeze/sid
  APT prefers natty-updates
  APT policy: (500, 'natty-updates'), (500, 'natty-security'), (500, 'natty')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.38-8-generic (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL 
set to de_DE.utf8)
Shell: /bin/sh linked to /bin/dash

Versions of packages vpnc depends on:
ii  libc6 2.13-0ubuntu13 Embedded GNU C Library: Shared lib
ii  libgcrypt11   1.4.6-4ubuntu2 LGPL Crypto library - runtime libr
ii  libgnutls26   2.8.6-1ubuntu2 the GNU TLS library - runtime libr

Versions of packages vpnc recommends:
ii  iproute   20100519-3 networking and traffic control too

Versions of packages vpnc suggests:
pn  resolvconf (no description available)

-- Configuration Files:
/etc/vpnc/example.conf [Errno 13] Permission denied: u'/etc/vpnc/example.conf'
/etc/vpnc/vpnc-script [Errno 13] Permission denied: u'/etc/vpnc/vpnc-script'

-- no debconf information
diff -urNad vpnc-0.5.3r449.orig/vpnc.c vpnc-0.5.3r449/vpnc.c
--- vpnc-0.5.3r449.orig/vpnc.c	2010-03-18 04:05:23.0 +0100
+++ vpnc-0.5.3r449/vpnc.c	2011-06-08 13:01:44.592464761 +0200
@@ -88,6 +88,10 @@
 	0x90, 0xCB, 0x80, 0x91, 0x3E, 0xBB, 0x69, 0x6E,
 	0x08, 0x63, 0x81, 0xB5, 0xEC, 0x42, 0x7B, 0x1F
 };
+const unsigned char VID_NATT_03[] = { /* "draft-ietf-ipsec-nat-t-ike-03" */
+	0x7d, 0x94, 0x19, 0xa6, 0x53, 0x10, 0xca, 0x6f,
+	0x2c, 0x17, 0x9d, 0x92, 0x15, 0x52, 0x9d, 0x56
+};
 const unsigned char VID_NATT_RFC[] = { /* "RFC 3947" */
 	0x4A, 0x13, 0x1C, 0x81, 0x07, 0x03, 0x58, 0x45,
 	0x5C, 0x57, 0x28, 0xF2, 0x0E, 0x95, 0x45, 0x2F
@@ -141,6 +145,7 @@
 	{ VID_NATT_01,		sizeof(VID_NATT_01),	"Nat-T 01" },
 	{ VID_NATT_02,		sizeof(VID_NATT_02),	"Nat-T 02" },
 	{ VID_NATT_02N,		sizeof(VID_NATT_02N),	"Nat-T 02N" },
+	{ VID_NATT_03,		sizeof(VID_NATT_03),	"Nat-T 03" },
 	{ VID_NATT_RFC,		sizeof(VID_NATT_RFC),	"Nat-T RFC" },
 	{ VID_DWR,		sizeof(VID_DWR),	"Delete With Reason" },
 	{ VID_CISCO_FRAG,	sizeof(VID_CISCO_FRAG),	"Cisco Fragmentation" },
@@ -1082,7 +1087,7 @@
 	a->af = isakmp_attr_lots;
 	a->u.lots.length = 4;
 	a->u.lots.data = xallocc(a->u.lots.length);
-	*((uint32_t *) a->u.lots.data) = htonl(2147483);
+	*((uint32_t *) a->u.lots.data) = htonl(3600);
 	a = new_isakmp_attribute_16(IKE_ATTRIB_LIFE_TYPE, IKE_LIFE_TYPE_SECONDS, a);
 	a = new_isakmp_attribute_16(IKE_ATTRIB_AUTH_METHOD, auth, a);
 	a = new_isakmp_attribute_16(IKE_ATTRIB_GROUP_DESC, dh_group, a);
@@ -1267,6 +1272,8 @@
 			l = l->next = new_isakmp_data_payload(ISAKMP_PAYLOAD_VID,
 VID_NATT_RFC, sizeof(VID_NATT_RFC));
 			l = l->next = new_isakmp_data_payload(ISAKMP_PAYLOAD_VID,
+VID_NATT_03, sizeof(VID_NATT_03));
+			l = l->next = new_isakmp_data_payload(ISAKMP_PAYLOAD_VID,
 VID_NATT_02N, sizeof(VID_NATT_02N));
 			l = l->next = new_isakmp_data_payload(ISAKMP_PAYLOAD_VID,
 VID_NATT_02, sizeof(VID_NATT_02));
@@ -1501,6 +1508,12 @@
 	seen_natt_vid = 1;
 	if (natt_draft < 1) natt_draft = 2;
 	DEBUG(2, printf("peer is NAT-T capable (RFC 3947)\n"));
+} else if (rp->u.vid.length == sizeof(VID_NATT_03)
+	&& memcmp(rp->u.vid.data, VID_NATT_03,
+		sizeof(VID_NATT_03)) == 0) {
+	seen_natt_vid = 1;
+	if (natt_draft < 1) natt_draft = 2;
+	DEBUG(2, printf("peer is NAT-T capable (draft-03)\n"));
 } else if (rp->u.vid.length == sizeof(VID_NATT_02N)
 	&& memcmp(rp->u.vid.data, VID_NATT_02N,
 		sizeof(VID_NATT_02N)) == 0) {
@@ -2454,7 +2467,7 @@
 	a->af = isakmp_attr_lots;
 	a->u.lots.length = 4;
 	a->u.lots.data = xallocc(a->u.lots.length);
-	*((uint32_t *) a->u.lots.data) = htonl(2147483);
+	*((uint32_t *) a->u.lots.data) = htonl(3600);
 	a = new_isakmp_attribute_16(ISAKMP_IPSEC_ATTRIB_SA_LIFE_TYPE, IPSEC_LIFE_SECONDS, a);
 
 	if (dh_group)

Bug#629636: linux-image-2.6.32-5-kirkwood: IPsec aes-sha1 with kirkwood/mv_cesa causes CPU to spin

[Sebastian Andrzej Siewior]

* Alexander Clouter | 2011-06-08 09:54:58 [+]:

>Whilst deploying IPsec (with strongswan-ike2) I ran into a complication[1]
>that causes mv_cesa to spin the CPU when the system receives an IPsec ESP
>packet; it seems to be able to send traffic (before the CPU spin) as a
>ICMP Echo request (a la pin) out from the system out is okay, until the
>ICMP Reply comes back.  The packet never 'arrives' as far as userspace is
>concerned and the only way to stop the CPU spinning is a reboot.

I've been working on that and forgot about it in the meantime. The
problem is that incremental sha1 checksum are wrong i.e. the previous
state is ignored by the hardware.
Kernel's auto-test droppped an error message which disappeared in later
a kernel so I assumed that it was fixed. This was not case but
"oldconfig" disabled the algorithm test.

Sebastian



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629569: [Pkg-varnish-devel] Bug#629569: varnish: "now" variable missing

[Stig Sandbeck Mathisen]

Ivan Savcic  writes:

> "now" variable is missing, probably due to a missing merge[1].

Thank you.  That actually looks serious.  Will investigate. 
-- 
Stig Sandbeck Mathisen 



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#540314: splashy: using vesafb for radeondrmfb cards hangs on module load

[Daniel Dickinson]

Package: splashy
Version: 0.3.13-5.1+b1
Followup-For: Bug #540314


On a system with a radeon HD card that uses radeon drm (and by default 
radeondrmfb), splashy hangs during kernel module load or the subsequent console 
font etc setting (not sure which as the screen blanks, and doesn't come back.  
The screen blanks during the radeon module load, but the it's not clear that 
the problem of it not coming back is from module load and not the soon after 
console set).

If I remove /usr/share/initramfs-tools/modules.d/splashy, and instead modify 
/etc/initramfs-tools/modules to contain radeon, radeondrmfb and it's 
dependencies, and use an appropriate video= parameter, then the system boots 
without hanging.

/etc/initramfs-tools/modules:
fbcon
radeondrmfb
radeon
ttm
drm_kms_helper
drm
i2c_algo_bit
power_supply
i2c_core

and add video=radeondrmfb:1920x1200 to /etc/default/grub  (to the default linux 
commandline)

-- System Information:
Debian Release: wheezy/sid
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'testing'), (100, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.38-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages splashy depends on:
ii  initramfs-tools 0.99 tools for generating an initramfs
ii  libc6   2.13-4   Embedded GNU C Library: Shared lib
ii  libdirectfb-1.2-9   1.2.10.0-4   direct frame buffer graphics - sha
ii  libgcc1 1:4.6.0-10   GCC support library
ii  libglib2.0-02.28.6-1 The GLib library of C routines
ii  libmagic1   5.04-5+b1File type determination library us
ii  libsplashy1 0.3.13-5.1+b1Library to draw splash screen on b
ii  lsb-base3.2-27   Linux Standard Base 3.2 init scrip
ii  zlib1g  1:1.2.3.4.dfsg-3 compression library - runtime

splashy recommends no packages.

Versions of packages splashy suggests:
ii  console-common0.7.85 basic infrastructure for text cons
ii  splashy-themes0.4.1  A complete user-space boot splash 
pn  upstart(no description available)

-- no debconf information

-- debsums errors found:
debsums: missing file /usr/share/initramfs-tools/modules.d/splashy (from 
splashy package)



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#549200: splashy: progress bar still doesn't work

[Daniel Dickinson]

Package: splashy
Version: 0.3.13-5.1+b1
Followup-For: Bug #549200


Using wheezy with insserv (the default boot system), the progress bar doesn't 
work, and after gdm starts splashy eventually times out and switches back to 
vt1 and reports that it timed out.

This kind of makes splashy too buggy to be distributable to casual users, and 
is probably RC in terms of bugginess for what the package is supposed to do, 
even though it doesn't make the machine unbootable.  I'll leave that up to RM's 
etc to decide that though.

-- System Information:
Debian Release: wheezy/sid
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'testing'), (100, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.38-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages splashy depends on:
ii  initramfs-tools 0.99 tools for generating an initramfs
ii  libc6   2.13-4   Embedded GNU C Library: Shared lib
ii  libdirectfb-1.2-9   1.2.10.0-4   direct frame buffer graphics - sha
ii  libgcc1 1:4.6.0-10   GCC support library
ii  libglib2.0-02.28.6-1 The GLib library of C routines
ii  libmagic1   5.04-5+b1File type determination library us
ii  libsplashy1 0.3.13-5.1+b1Library to draw splash screen on b
ii  lsb-base3.2-27   Linux Standard Base 3.2 init scrip
ii  zlib1g  1:1.2.3.4.dfsg-3 compression library - runtime

splashy recommends no packages.

Versions of packages splashy suggests:
ii  console-common0.7.85 basic infrastructure for text cons
ii  splashy-themes0.4.1  A complete user-space boot splash 
pn  upstart(no description available)

-- no debconf information

-- debsums errors found:
debsums: missing file /usr/share/initramfs-tools/modules.d/splashy (from 
splashy package)



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629647: udev: keymap and rule to get microsoft natural keyboard "zoom" key to work

[Nicolas Chauvat]

Package: udev
Version: 164-3
Severity: wishlist


Hi,

I edited /lib/udev/rules.d/95-keymap.rules to add:

ENV{ID_VENDOR}=="Microsoft", ENV{ID_MODEL_ID}=="00db", RUN+="keymap $name 
microsoft-natural-keyboard-4000"

in the section keyboard_usbcheck, then created the keymap file:

$ cat /lib/udev/keymaps/microsoft-natural-keyboard-4000
0xc022d zoomin
0xc022e zoomout

then loaded the above with /lib/udev/keymap and that was enough to get
the "zoom" key working.

I suppose the above rule and keymap could be added to the udev package
for other users of this keyboard to benefit from the zoom key without
having to do the research themselves.

See also blog entry at https://www.logilab.org/blogentry/68294

-- System Information:
Debian Release: 6.0.1
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=, LC_CTYPE= (charmap=UTF-8) (ignored: LC_ALL set to fr_FR.UTF8)
Shell: /bin/sh linked to /bin/bash

Versions of packages udev depends on:
ii  debconf [debconf-2.0]   1.5.36.1 Debian configuration management sy
ii  libc6   2.11.2-10Embedded GNU C Library: Shared lib
ii  libselinux1 2.0.96-1 SELinux runtime shared libraries
ii  libudev0164-3libudev shared library
ii  libusb-0.1-42:0.1.12-16  userspace USB programming library
ii  lsb-base3.2-23.2squeeze1 Linux Standard Base 3.2 init scrip
ii  util-linux  2.17.2-9 Miscellaneous system utilities

Versions of packages udev recommends:
ii  pciutils  1:3.1.7-6  Linux PCI Utilities
ii  usbutils  0.87-5 Linux USB utilities

udev suggests no packages.

-- debconf information excluded



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629648: lintian: missing-pre-dependency-on-multiarch-support FP for -dev packages

[Simon McVittie]

Package: lintian
Version: 2.5.0
Severity: normal

I've been converting libdbus/experimental to multiarch. It has nearly the
layout you'd expect, except that the shared library is in /lib:

libdbus-1-dev
/usr/lib/MULTIARCH/libdbus-1.a
/usr/lib/MULTIARCH/libdbus-1.so -> /lib/MULTIARCH/libdbus-1.so.3.6.1
libdbus-1-3
/lib/MULTIARCH/libdbus-1.so.3.6.1
/lib/MULTIARCH/libdbus-1.so.3 -> libdbus-1.so.3.6.1

It looks as though checks/files considers the .so symlink to be enough for
libdbus-1-dev to require a dependency on multiarch-support. However,
nothing should be using libdbus-1.so at runtime (the SONAME is libdbus-1.so.3),
so whether we've upgraded the dynamic linker before unpacking libdbus-1-dev
is irrelevant.

debhelper doesn't put multiarch-support in libdbus-1-dev's
${misc:Pre-Depends}, resulting in an auto-rejected Lintian error unless I
explicitly add multiarch-support to Pre-Depends.

Perhaps you could relax the check, so that only real files (not symlinks)
in a multiarch directory are considered to be a reason for needing
multiarch-support? (That would match what dh_makeshlibs does.)

S

-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (101, 
'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.39-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.utf8, LC_CTYPE=en_GB.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages lintian depends on:
ii  binutils  2.21.52.20110606-1 The GNU assembler, linker and bina
ii  diffstat  1.54-1 produces graph of changes introduc
ii  dpkg-dev  1.16.0.3   Debian package development tools
ii  file  5.04-5+b1  Determines file type using "magic"
ii  gettext   0.18.1.1-3 GNU Internationalization utilities
ii  intltool-debian   0.35.0+20060710.1  Help i18n of RFC822 compliant conf
ii  libapt-pkg-perl   0.1.24+b2  Perl interface to libapt-pkg
ii  libclass-accessor-per 0.34-1 Perl module that automatically gen
ii  libemail-valid-perl   0.184-1Perl module for checking the valid
ii  libipc-run-perl   0.89-1 Perl module for running processes
ii  libparse-debianchange 1.2.0-1parse Debian changelogs and output
ii  libtimedate-perl  1.2000-1   collection of modules to manipulat
ii  liburi-perl   1.58-1 module to manipulate and access UR
ii  locales   2.13-5 Embedded GNU C Library: National L
ii  locales-all [locales] 2.13-5 Embedded GNU C Library: Precompile
ii  man-db2.6.0.2-1  on-line manual pager
ii  perl [libdigest-sha-p 5.12.3-7   Larry Wall's Practical Extraction 
ii  unzip 6.0-4  De-archiver for .zip files

lintian recommends no packages.

Versions of packages lintian suggests:
ii  binutils-multiarch2.21.52.20110606-1 Binary utilities that support mult
ii  libhtml-parser-perl   3.68-1+b1  collection of modules that parse H
ii  libtext-template-perl 1.45-2 Text::Template perl module
ii  man-db2.6.0.2-1  on-line manual pager

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629649: icedove: fails to display birthday field in address book contact summary

[alex bodnaru]

Package: icedove
Version: 3.1.10-1
Severity: normal


hello friends,

thanks for providing icedove. it's wonderful beyond small fixes that may 
improve it further.

i'm reporting a quite queer bug:
my friend is born on march 15, 1968. 
while there's no problem setting his birthday, and even viewing it in the 
calendar using thunderbirthday, in the summary window under the list of 
contacts, the birthday field under other shows 03/14/1968. 
this didn't fail for days around this, or for years around this. any idea?

best regards,
alex


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (300, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages icedove depends on:
ii  debianutils 4Miscellaneous utilities specific t
ii  fontconfig  2.8.0-2.2generic font configuration library
ii  libasound2  1.0.23-4 shared library for ALSA applicatio
ii  libatk1.0-0 2.0.0-1  The ATK accessibility toolkit
ii  libc6   2.13-4   Embedded GNU C Library: Shared lib
ii  libcairo2   1.10.2-6 The Cairo 2D vector graphics libra
ii  libdbus-1-3 1.4.8-3  simple interprocess messaging syst
ii  libffi5 3.0.9-4  Foreign Function Interface library
ii  libfontconfig1  2.8.0-2.2generic font configuration library
ii  libfreetype62.4.4-1  FreeType 2 font engine, shared lib
ii  libgcc1 1:4.6.0-10   GCC support library
ii  libgdk-pixbuf2.0-0  2.23.3-3 GDK Pixbuf library
ii  libglib2.0-02.28.6-1 The GLib library of C routines
ii  libgtk2.0-0 2.24.4-3 The GTK+ graphical user interface 
ii  libhunspell-1.2-0   1.2.14-4 spell checker and morphological an
ii  libjpeg62   6b1-1The Independent JPEG Group's JPEG 
ii  libnspr4-0d 4.8.8-1  NetScape Portable Runtime Library
ii  libnss3-1d  3.12.10-1Network Security Service libraries
ii  libpango1.0-0   1.28.3-6 Layout and rendering of internatio
ii  libpixman-1-0   0.21.8-1 pixel-manipulation library for X a
ii  libpng12-0  1.2.44-2 PNG library - runtime
ii  libsqlite3-03.7.6.3-1SQLite 3 shared library
ii  libstartup-notification 0.12-1   library for program launch feedbac
ii  libstdc++6  4.6.0-10 The GNU Standard C++ Library v3
ii  libx11-62:1.4.3-1X11 client-side library
ii  libxrender1 1:0.9.6-1X Rendering Extension client libra
ii  libxt6  1:1.1.1-1X11 toolkit intrinsics library
ii  psmisc  22.13-1  utilities that use the proc file s
ii  zlib1g  1:1.2.3.4.dfsg-3 compression library - runtime

Versions of packages icedove recommends:
ii  hunspell-ro [hunspell-diction 1:3.3.0-3  Romanian dictionary for hunspell
ii  myspell-en-us [myspell-dictio 1:3.3.0-3  English_american dictionary for my
ii  myspell-he [myspell-dictionar 1.1-1  Hebrew dictionary for myspell

Versions of packages icedove suggests:
ii  libdbus-glib-1-2   0.92-1simple interprocess messaging syst
ii  libgconf2-42.28.1-6  GNOME configuration database syste
ii  libgnomevfs2-0 1:2.24.4-1GNOME Virtual File System (runtime
ii  libgssapi-krb5-2   1.9+dfsg-1+b1 MIT Kerberos runtime libraries - k
ii  libnotify1 [libnotify1-gtk 0.5.0-2   sends desktop notifications to a n
ii  ttf-lyx2.0.0-1   TrueType versions of some TeX font

-- debconf information:
* icedove/browser: GNOME



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#384059: loop-aes-utils: lower version of diverted file breaks ntfs-3g

[Pierre Labastie]

Package: loop-aes-utils
Version: 2.16.2-2
Followup-For: Bug #384059

The version of mount installed by loop-aes-utils (2.16.2) lags behind current 
version
in package mount (2.17.2). In 2.16.2, the command line switch --no-canonicalize
is not recognized. This switch is used by the recently upgraded ntfs-3g, which 
renders
ntfs unmountable. I had to uninstall loop-aes-utils.
Not sure many people want to have loop-aes and ntfs at the same time: I had 
installed
loop-aes long ago to do some testing, but almost never used it. So it was not 
hard
for me to remove that package. On the other hand, since the switch is 
mentionned in the
man page, any other mount.something program might use it.
I fall in the "novice" category (with respect to debian), so I am sorry I cannot
propose a patch. Debian's packaging system is a big chunk to swallow!
Thanks to all the developper, it is a great system.

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-2-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages loop-aes-utils depends on:
ii  gnupg1.4.11-3GNU privacy guard - a free PGP rep
ii  libblkid12.17.2-9.1  block device id library
ii  libc62.13-4  Embedded GNU C Library: Shared lib
ii  libselinux1  2.0.98-1+b1 SELinux runtime shared libraries
ii  libsepol12.0.42-1SELinux library for manipulating b
ii  mount2.17.2-9.1  Tools for mounting and manipulatin

Versions of packages loop-aes-utils recommends:
ii  sharutils 1:4.11-1   shar, unshar, uuencode, uudecode

loop-aes-utils suggests no packages.



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#542166: RFP: python-jsonrpc -- A json-rpc package which implements JSON-RPC over HTTP

[Carlos Alberto Lopez Perez]

Any chance of getting this software into Debian? I really miss it



signature.asc
Description: OpenPGP digital signature

Bug#625452: fixing commit identified

[Patrick Josef Strasser]

Just for the records:

I bisected poppler to find the commit that solved the problem:

commit 4bd25223c4d15dfa91965a6e86eaa444a5a81f71
Author: Albert Astals Cid 
Date:   Sat Oct 16 15:08:05 2010 +0100

Do not omit this character

Mimics Cairo backend and Adode Reader behaviour

This was released with 0.15.1

Regards
Patrick
-- 
Patrick Strasser 
Business Development des Zentralen Informatikdienstes (ZID)
Technische Universität Graz



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629594: clang calls linker with wrong args -> crt*.o searched in $pwd

[Sylvestre Ledru]

Le mercredi 08 juin 2011 à 13:24 +0200, Michael Wild a écrit :
> This is caused by a recent modification in libc6-dev (source eglibc),
> presumably for multi-arch support. Attached patch teaches Clang to
> search these directories.
Great, thanks. 
Is it a backport from an upstream patch or you wrote it yourself ?

>  However, I suspect that it will break sooner
> or later again when one does "cross-compiling" with -m64 or -m32 on i386
> and amd64, respectively, because the "foreign" crt*.o files haven't been
> moved yet. Don't know whether they ever will be moved, though, but logic
> and some hunch tells me so...
Aurelien, do you know if they are going to move ?

Thanks
Sylvestre






--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629620: please provide configuration include mechanism (e.g. /etc/tmux.conf.d/)

[Romain Francoise]

Daniel Baumann  writes:

> it would be nice if tmux would support including other configuration
> files, either via an include statement in /etc/tmux.conf, or better,
> automatically read all files in /etc/tmux.conf.d/, if existing (same for
> ~/.tmux.conf resp. ~/.tmux.conf.d/).

You can use the 'source-file' (or 'source') command to include other
files.

I'm not sure about automatically including files from a user directory,
though...

-- 
Romain Francoise 
http://people.debian.org/~rfrancoise/



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629620: please provide configuration include mechanism (e.g. /etc/tmux.conf.d/)

[Daniel Baumann]

retitle 629620 improve source-file to respect wildcards
thanks

On 06/08/2011 02:19 PM, Romain Francoise wrote:
> You can use the 'source-file' (or 'source') command to include other
> files.

oh, indeed. must have overseen it when looking at the manpage, sorry.

however, unfortunately wildcards don't work (like 'source
/etc/tmux.conf.d/*').

> I'm not sure about automatically including files from a user directory,
> though...

not globally, but in the user context. the current hierarchy is

  '/etc/tmux.conf -> ~/.tmux.conf'

but it rather should be

  '/etc/tmux.conf -> /etc/tmux.conf.d/* -> ~/.tmux.conf ->
   ~/.tmux.conf.d'.

-- 
Address:Daniel Baumann, Donnerbuehlweg 3, CH-3012 Bern
Email:  daniel.baum...@progress-technologies.net
Internet:   http://people.progress-technologies.net/~daniel.baumann/



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629650: gvfs fuse mount is not functional after logout and subsequent login

[Dim Tab]

Package: gvfs
Version: 1.6.4-3
Severity: important
Tags: l10n

After a fresh boot everything works fine. If I logout and login again,
$HOME/.gvfs folder is unaccessible:

$ ls -la |grep .gvfs
ls: cannot access .gvfs: Transport endpoint is not connected
d?  ? ? ?  ?? .gvfs

Also due to this, thunar and pcmanfm file managers are failing to start 
giving a

similar error about .gvfs folder.

One temporary solution is to manually unmount .gvfs before each logout:

# umount .gvfs

There are several bug reports for other distributions also. The one that 
I got

the temporary solution can be found here:
https://bugs.launchpad.net/debian/+source/gvfs/+bug/212789



-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (1001, 'testing'), (102, 'stable'), (101, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-7.dmz.2-liquorix-686 (SMP w/2 CPU cores; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages gvfs depends on:
ii  libc6 2.13-4 Embedded GNU C Library: 
Shared lib
ii  libdbus-1-3   1.4.8-3simple interprocess 
messaging syst
ii  libexpat1 2.0.1-7XML parsing C library - 
runtime li
ii  libgconf2-4   2.28.1-6   GNOME configuration 
database syste
ii  libgdu0   2.32.0-1   GObject based Disk Utility 
Library

ii  libglib2.0-0  2.28.6-1   The GLib library of C routines
ii  libgnome-keyring0 3.0.0-2GNOME keyring services library
ii  libudev0  167-3  libudev shared library
ii  x11-utils 7.6+2  X11 utilities

Versions of packages gvfs recommends:
ii  dbus  1.4.8-3simple interprocess 
messaging syst
ii  policykit-1-gnome 0.101-2GNOME authentication agent 
for Pol


Versions of packages gvfs suggests:
ii  gvfs-backends 1.6.4-3userspace virtual 
filesystem - bac


-- no debconf information



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629651: trac: wrong Vcs-Browser url

[Petr]

Package: trac
Version: 0.11.7-4
Severity: minor

There is no logner viewsvn on svn.debian.org. Fix it to
http://svn.debian.org/viewvc/python-apps/packages/trac/trunk/.
This is somehow related to migration web interface of svn.debian.org to 
http://anonscm.debian.org.
Thanks for fixing it.

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (800, 'unstable'), (700, 'experimental'), (500, 
'stable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32.16-linode28 (SMP w/4 CPU cores)
Locale: LANG=cs_CZ.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages trac depends on:
ii  python   2.6.6-12interactive high-level object-orie
ii  python-central   0.6.16+nmu1 register and build utility for Pyt
ii  python-genshi0.6-1   Python XML-based template engine
ii  python-psycopg2  2.2.1-1 Python module for PostgreSQL
ii  python-setuptools0.6.15-1Python Distutils Enhancements (set

Versions of packages trac recommends:
ii  apache2 2.2.17-2 Apache HTTP Server metapackage
ii  apache2-mpm-prefork [httpd] 2.2.17-2 Apache HTTP Server - traditional n
ii  libjs-jquery1.5.1-1  JavaScript library for dynamic web
ii  nginx-full [httpd]  0.8.54-3 small, but very powerful and effic
ii  python-pygments 1.4+dfsg-1   syntax highlighting package writte
ii  python-subversion   1.6.16dfsg-1 Python bindings for Subversion
ii  python-tz   2010b-1  Python version of the Olson timezo

Versions of packages trac suggests:
ii  libapache2-mod-python 3.3.1-9+b1 Python-embedding module for Apache
ii  libapache2-mod-wsgi   3.3-2  Python WSGI adapter module for Apa
pn  python-docutils(no description available)
pn  python-textile (no description available)
pn  trac-accountmanager(no description available)
pn  trac-authopenid(no description available)
pn  trac-bitten(no description available)
pn  trac-bzr   (no description available)
pn  trac-customfieldadmin  (no description available)
pn  trac-email2trac(no description available)
pn  trac-git   (no description available)
pn  trac-graphviz  (no description available)
pn  trac-ja-resource   (no description available)
pn  trac-mastertickets (no description available)
pn  trac-mercurial (no description available)
pn  trac-spamfilter(no description available)
pn  trac-wikiprint (no description available)
pn  trac-wikirename(no description available)
pn  trac-wysiwyg   (no description available)
pn  trac-xmlrpc(no description available)

-- no debconf information

*** /home/pevik/trac-fix-vsc-browser.patch
diff --git a/control.old b/control
index b95bc08..55477df 100644
--- a/control.old
+++ b/control
@@ -7,7 +7,7 @@ Maintainer: Python Applications Packaging Team 
, W. Martin Borgert 

 Standards-Version: 3.9.1
 Vcs-Svn: svn://svn.debian.org/svn/python-apps/packages/trac/trunk/
-Vcs-Browser: http://svn.debian.org/viewsvn/python-apps/packages/trac/trunk/
+Vcs-Browser: http://svn.debian.org/viewvc/python-apps/packages/trac/trunk/
 XS-Python-Version: all
 Homepage: http://trac.edgewall.com
 



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629492: cdrom: Installing on dual-processor PowerPC system (ex. QuickSilver PowerMac G4) installs non-SMP kernel

[Steve McIntyre]

reassign 629492 installation-reports
thanks

On Tue, Jun 07, 2011 at 12:58:43AM -0500, Andrew Peng wrote:
>Package: cdrom
>Severity: important
>Tags: d-i
>
>Installing a fresh base system on a dual processor PowerPC system,
>such as in my case a QuickSilver PowerMac G4 with dual 800MHz CPU's
>will fail SMP detection and instead install a non-SMP kernel by
>default.
>
>Installing the SMP kernel metapackage after the system install is
>done detects the dual-processor configuration normally.
>
>Here is the system immediately after installation:
>pengc99@baccus:~$ uname -r
>2.6.32-5-powerpc
>pengc99@baccus:~$
>
>Now install the SMP kernel:
>root@baccus:~# apt-get install linux-image-powerpc-smp
>root@baccus:~# apt-get install linux-image-powerpc-smp
>

Bug#629652: mysqltuner: new upstream version

[KURASHIKI Satoru]

Package: mysqltuner
Version: 1.1.0
Severity: normal

*** Please type your report below this line ***
hi,

The upstream moves to github, and releases 1.2.0 (by tags).
# https://github.com/rackerhacker/MySQLTuner-perl
Please consider to update package.

regards,
-- 
KURASHIKI Satoru

-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-4-pve (SMP w/8 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash

Versions of packages mysqltuner depends on:
ii  perl  5.12.3-7   Larry Wall's Practical Extraction 

Versions of packages mysqltuner recommends:
pn  mysql-server   (no description available)



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629653: ITP: libhtml-data-parser-perl -- parser for data embedded in HTML

[Jonas Smedegaard]

Package: wnpp
Severity: wishlist
Owner: Jonas Smedegaard 

* Package name: libhtml-data-parser-perl
  Version : 0.003
  Upstream Author : Toby Inkster 
* URL : http://search.cpan.org/dist/HTML-Data-Parser/
* License : Artistic or GPL-1+
  Programming Lang: Perl
  Description : parser for data embedded in HTML

 Resource Description Framework (RDF) is a standard model for data
 interchange on the Web.
 .
 HTML::Data::Parser parses data embedded in HTML. It understands the
 following standards and patterns for embedding data:
  * RDFa 
  * Microformats 
  * GRDDL 
  * Microdata 
  * N3-in-HTML 
  * HTML5 Document Outline
http://www.w3.org/TR/html5/sections.html#outlines



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#629594: clang calls linker with wrong args -> crt*.o searched in $pwd

[Michael Wild]

On 06/08/2011 02:23 PM, Sylvestre Ledru wrote:
> Le mercredi 08 juin 2011 à 13:24 +0200, Michael Wild a écrit :
>> This is caused by a recent modification in libc6-dev (source eglibc),
>> presumably for multi-arch support. Attached patch teaches Clang to
>> search these directories.
> Great, thanks. 
> Is it a backport from an upstream patch or you wrote it yourself ?

I wrote it myself and forwarded it upstream:
http://llvm.org/bugs/show_bug.cgi?id=10100 (as is noted in
debian/patches/11-searchMultiArchLibDir.patch). As I remarked there, I'm
not entirely happy with it, because of the confusion of gcc-triplets
(/usr/lib/i386-linux-gnu vs. /usr/lib/gcc/i486-linux-gnu/) it makes the
code potentially brittle. IMHO I would prefer it if the Clang developers
just ditched this whole magic guess-work code and made the header and
file search paths configurable with config files.

Michael




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#623532: packaging version 2.2.0

[Barak A. Pearlmutter]

For my own nefarious purposes (getting mldemos to build) I've updated
the packaging info on opencv for the latest upstream: opencv 2.2.0.
Patches available in git://github.com/barak/opencv.git

It was pretty straightforward, albeit somewhat tedious as upstream
fragmented the package into many little libraries.

Naturally I'm hoping that an upgraded version be uploaded; if my
patches help in that regard I would be most gratified.

Cheers,

--Barak.
--
Barak A. Pearlmutter
 Hamilton Institute & Dept Comp Sci, NUI Maynooth, Co. Kildare, Ireland
 http://www.bcl.hamilton.ie/~barak/



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org