can I help to translate ?
can I help to translate the debian installer for German ? -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/1727375.EjeG0STviR@debian
Bug#921861: installation-reports: firmware-amd-graphics need for ATI Graphics cards
Package: installation-reports Severity: normal Dear Maintainer, I have a ATI Radeon RX 580 and after installation complette X don't start. The solution is after installation apt-get install firmware-amd-graphics. -- Package-specific info: Boot method: network Image version: Debian Installer Buster Alpha 5 release Date: Machine: Partitions: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Clock/timezone setup: [ ] User/password setup:[ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="10 (buster) - installer build 20181206" X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == uname -a: Linux debian 4.18.0-3-amd64 #1 SMP Debian 4.18.20-2 (2018-11-23) x86_64 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:836b] lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) lspci -knn: 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) lspci -knn: 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) lspci -knn: 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) lspci -knn: 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: ehci-pci lspci -knn: Kernel modules: ehci_pci lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 [8086:3a44] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1d.2 USB controller [0c03]: Intel
Bug#921863: installation-reports: irqbalance need for SMP systems
Package: installation-reports Severity: normal Dear Maintainer, For Multi CPU systems irqbalance is needed. -- Package-specific info: Boot method: network Image version: debian buster Alpha 5 Date: Machine: IBM Partitions: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Clock/timezone setup: [ ] User/password setup:[ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="10 (buster) - installer build 20181206" X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == uname -a: Linux debian 4.18.0-3-amd64 #1 SMP Debian 4.18.20-2 (2018-11-23) x86_64 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:836b] lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) lspci -knn: 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) lspci -knn: 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) lspci -knn: 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) lspci -knn: 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: ehci-pci lspci -knn: Kernel modules: ehci_pci lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 [8086:3a44] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci_hcd lspci -knn: 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] lspci -knn: Subsystem: ASUSTeK Computer Inc.
Problem with firmware loading
Hallo. I have download the debian testing iso file from 05.01.20114. My laptop have a intel centrino 1000 wlan card. this card needs non-free firmware but the debian installer dont load the firmware from usb device. the usb device ist fromated with FAT and the firmware is on root. I have testing to load firmware with expert mode on the deian installer and then load firmware but the installer says : the failing step is: Load drivers from removable media. -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/15440591.IAJRWrFXhu@debian
Re: Problem with firmware loading
Am Sonntag, 5. Januar 2014, 13:40:17 schrieb Andreas Cadhalpun: > > Sadly the firmware loading is currently broken in jessie/sid, see bug > #725714 [1]. > I hope this will get fixed soon. > > Best regards, > Andreas > > > 1: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=725714 Yes it's the bug I mean. Hope the bug is fix soon. -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/43413065.Y57fkMDrLO@debian
Probleme with the firmware-iwlwifi
Hello. I have test the installer from 22.12.2014. I can not install the Firmware for my Laptop. The installer need iwlwifi-1000-5.ucode iwlwifi-1000-4.ucode iwlwifi-1000-3.ucode iwlwifi-1000-2.ucode iwlwifi-1000-1.ucode but only the iwlwifi-1000-5.ucode is on the firmware-iwlwifi 0.43 and it works only with iwlwifi-1000-5.ucode. It don ned the other firmware files on my installed system. Can you help me why this is? -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/1890486.djQlsil249@debian
Re: Probleme with the firmware-iwlwifi
I found another bug. If the installer ask to install firmware and you not insert the usb stick, but you press enter the massage comes agnain but it double the output wich firmware it need. Make the procudeur 10 or 20 times an see the output message. Happy Hoildays Am Mittwoch, 24. Dezember 2014, 14:27:52 schrieb Ben Hutchings: > On Tue, 2014-12-23 at 21:28 +0100, Heiko Ernst wrote: > > Hello. > > > > I have test the installer from 22.12.2014. I can not install the Firmware > > for my Laptop. The installer need iwlwifi-1000-5.ucode > > iwlwifi-1000-4.ucode iwlwifi-1000-3.ucode iwlwifi-1000-2.ucode > > iwlwifi-1000-1.ucode but only the iwlwifi-1000-5.ucode is on the > > firmware-iwlwifi 0.43 and it works only with iwlwifi-1000-5.ucode. It don > > ned the other firmware files on my installed system. Can you help me why > > this is? > > Each of those filenames is used for a particular firmware API version > (*not* an exact version of the firmware). The driver requests the > filename corresponding to the newest firmware API version it supports > (iwlwifi-1000-5.ucode in this case), and if that fails then it will > request older versions. > > The installer tries to work out what files are missing by looking for > error messages about missing files, and as the driver requests all those > files it will list all the files. But really you only need one of them. > > Ben. -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/2938310.aTnOm7VZaZ@debian
Bug#777439: Jessie DI-rc1 amd64 after installation no network interfaces
Package: installation-reports Severity: critical Tags: newcomer Hello. After installation Debian Jessie with the debian jessie di-rc1 network installer I have no notwork interfaces after boot the installed system. My Laptop is a ASUS PRO7BSV. I have use my wlan to install and download the packages from the internet, but after the installation, no network cards with ifconfig found. After installation my /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback -- Package-specific info: Boot method: Image version: Date: Machine: Partitions: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Clock/timezone setup: [ ] User/password setup:[ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="8 (jessie) - installer build 20131124-00:05" X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == uname -a: Linux debian 3.11-2-amd64 #1 SMP Debian 3.11.8-1 (2013-11-13) x86_64 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:836b] lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) lspci -knn: 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) lspci -knn: 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) lspci -knn: 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) lspci -knn: 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: ehci-pci lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82ea] lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 [8086:3a44] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn:
Bug#777439: Jessie DI-rc1 amd64 after installation no network interfaces
Am Sonntag, 8. Februar 2015, 10:39:28 schrieb Karsten Merker: > On Sun, Feb 08, 2015 at 10:24:16AM +0100, Heiko Ernst wrote: > > Package: installation-reports > > Severity: critical > > Tags: newcomer > > > > Hello. > > > > After installation Debian Jessie with the debian jessie di-rc1 network > > installer I have no notwork interfaces after boot the installed system. My > > Laptop is a ASUS PRO7BSV. I have use my wlan to install and download the > > packages from the internet, but after the installation, no network cards > > with ifconfig found. > > > > After installation my /etc/network/interfaces > > > > # This file describes the network interfaces available on your system > > # and how to activate them. For more information, see interfaces(5). > > > > # The loopback network interface > > auto lo > > iface lo inet loopback > > Hello, > > could you provide the output of the "dmesg" command on the installed > system? > > Regards, > Karsten [0.00] Initializing cgroup subsys cpuset [0.00] Initializing cgroup subsys cpu [0.00] Initializing cgroup subsys cpuacct [0.00] Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-16) ) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) [0.00] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=3bc199dc-c4e3-41b1-907d-ce1e1ccfb355 ro quiet [0.00] e820: BIOS-provided physical RAM map: [0.00] BIOS-e820: [mem 0x-0x0009e7ff] usable [0.00] BIOS-e820: [mem 0x0009e800-0x0009] reserved [0.00] BIOS-e820: [mem 0x000e-0x000f] reserved [0.00] BIOS-e820: [mem 0x0010-0x1fff] usable [0.00] BIOS-e820: [mem 0x2000-0x201f] reserved [0.00] BIOS-e820: [mem 0x2020-0x3fff] usable [0.00] BIOS-e820: [mem 0x4000-0x401f] reserved [0.00] BIOS-e820: [mem 0x4020-0xaabd1fff] usable [0.00] BIOS-e820: [mem 0xaabd2000-0xaacf8fff] reserved [0.00] BIOS-e820: [mem 0xaacf9000-0xaacfafff] usable [0.00] BIOS-e820: [mem 0xaacfb000-0xaad8dfff] reserved [0.00] BIOS-e820: [mem 0xaad8e000-0xaad8efff] usable [0.00] BIOS-e820: [mem 0xaad8f000-0xaadb7fff] reserved [0.00] BIOS-e820: [mem 0xaadb8000-0xaadc7fff] usable [0.00] BIOS-e820: [mem 0xaadc8000-0xaade7fff] reserved [0.00] BIOS-e820: [mem 0xaade8000-0xaaf18fff] usable [0.00] BIOS-e820: [mem 0xaaf19000-0xaafe7fff] ACPI NVS [0.00] BIOS-e820: [mem 0xaafe8000-0xaaffcfff] usable [0.00] BIOS-e820: [mem 0xaaffd000-0xaaff] ACPI data [0.00] BIOS-e820: [mem 0xab00-0xaf9f] reserved [0.00] BIOS-e820: [mem 0xe000-0xe3ff] reserved [0.00] BIOS-e820: [mem 0xfec0-0xfec00fff] reserved [0.00] BIOS-e820: [mem 0xfed1-0xfed13fff] reserved [0.00] BIOS-e820: [mem 0xfed18000-0xfed19fff] reserved [0.00] BIOS-e820: [mem 0xfed1c000-0xfed1] reserved [0.00] BIOS-e820: [mem 0xfee0-0xfee00fff] reserved [0.00] BIOS-e820: [mem 0xff98-0xffbf] reserved [0.00] BIOS-e820: [mem 0xffd8-0x] reserved [0.00] BIOS-e820: [mem 0x0001-0x00014fdf] usable [0.00] NX (Execute Disable) protection: active [0.00] SMBIOS 2.6 present. [0.00] DMI: ASUSTeK Computer Inc. N73SV/N73SV, BIOS N73SV.306 08/18/2011 [0.00] e820: update [mem 0x-0x0fff] usable ==> reserved [0.00] e820: remove [mem 0x000a-0x000f] usable [0.00] AGP: No AGP bridge found [0.00] e820: last_pfn = 0x14fe00 max_arch_pfn = 0x4 [0.00] MTRR default type: uncachable [0.00] MTRR fixed ranges enabled: [0.00] 0-9 write-back [0.00] A-B uncachable [0.00] C-C write-protect [0.00] D-E7FFF uncachable [0.00] E8000-F write-protect [0.00] MTRR variable ranges enabled: [0.00] 0 base 0 mask F8000 write-back [0.00] 1 base 08000 mask FE000 write-back [0.00] 2 base 0A000 mask FF800 write-back [0.00] 3 base 0A800 mask FFC00 write-back [0.00] 4 base 0AB00 mask FFF00 uncachable [0.00] 5 base 1 mask FC000 write-back [
Bug#777459: debian installer firmware loader problem
Package: installation-reports Severity: critical Tags: newcomer I have a problem in debian jessie DI-rc1 installer. It need the Firmware iwlwifi-100-5 iwlwifi-100-4 iwlwifi-100-3 iwlwifi-100-2 iwlwifi-100-1 iwlwifi-100-5 iwlwifi-100-4 iwlwifi-100-3 iwlwifi-100-2 iwlwifi-100-1. But only iwlwifi-100-5 is needed. After loading of iwlwifi-1000-5 there can be checked whether the other files are still made? -- Package-specific info: Boot method: Image version: Date: Machine: Partitions: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Clock/timezone setup: [ ] User/password setup:[ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="8 (jessie) - installer build 20131124-00:05" X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == uname -a: Linux debian 3.11-2-amd64 #1 SMP Debian 3.11.8-1 (2013-11-13) x86_64 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13) lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:836b] lspci -knn: 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) lspci -knn: 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) lspci -knn: 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) lspci -knn: 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) lspci -knn: 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: ehci-pci lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82ea] lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 [8086:3a44] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] lspci -knn: Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] lspci -knn:
Bug#777439: Jessie DI-rc1 amd64 after installation no network interfaces
On Sun, 08 Feb 2015 15:10:15 + Ben Hutchings wrote: > On Sun, 2015-02-08 at 10:24 +0100, Heiko Ernst wrote: > > Package: installation-reports > > Severity: critical > > Tags: newcomer > > > > Hello. > > > > After installation Debian Jessie with the debian jessie di-rc1 network > > installer I have no notwork interfaces after boot the installed system. > > Based on the log, I don't think that's correct. > > > My > > Laptop is a ASUS PRO7BSV. I have use my wlan to install and download the > > packages from the internet, but after the installation, no network cards with > > ifconfig found. > > By default, ifconfig lists only the interfaces that are up. Use 'ip l' > or 'ifconfig -a' to list all interfaces. > > > After installation my /etc/network/interfaces > > > > # This file describes the network interfaces available on your system > > # and how to activate them. For more information, see interfaces(5). > > > > # The loopback network interface > > auto lo > > iface lo inet loopback > > This is normal behaviour after installing the Desktop task. You should > then use Network Manager to configure the network interfaces. I have no install a Desktop system only a shell, "ifconfig -a" show all devices yes but how can I configure the devices that they are up on start and why do this not the installer ? -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/6881726.9TWnxPdOSE@debian
Bug#777439: Jessie DI-rc1 amd64 after installation no network interfaces
On Mon, 09 Feb 2015 04:46:17 + Ben Hutchings wrote: > OK, then this is not expected. This is my etc/network/interfaces file I have wrote hope this is a workaround for this time but why show me the network manager in kde not the connection? I see only a ? over the icon. --- # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp # The wlan interface auto wlan0 iface wlan0 inet dhcp wpa-ssid $myssid wpa-psk xx wpa-key-mgmt WPA-PSK -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/29658599.tJVmDS0lqi@debian
Bug#777439: Jessie DI-rc1 amd64 after installation no network interfaces
On Tue, 10 Feb 2015 17:47:01 +0100 Holger Wansing wrote: > This is getting confusing: > In https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=777439#35 you wrote, > that you have done a shell-only install (no desktop environment). > Now you write, that you have kde and network-manager installed. > ??? > Without the installer logs there is no chance to get this sorted out. > Sorry, I have install only the shell with the debian installer and have than with apt-get install kde., after installing the shell. -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/1750089.DSIBQXjoDo@debian
hello
Hello, im using debian squeeze and want a realtime kernel for jackd and rosegarden. have debian squeeze a realtime kernel package ? -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201101151536.09016.heiko.er...@aschershain.de
Installer wish
Please forward the message to a german team user Ich hätte da mal eine Vorschlag für den debian squeeze Installer, Ich habe 2 Netzwerkkarten in meinem Rechner. Ist es möglich das ich im Installer gleich alle beide aktiviren kann so das ich dann nach der Installation den Grundsystems mit ifconfig alle beide Netzwerkkarten angezeigt bekomme? Mfg de Heiko -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201004182041.52840.heiko.er...@aschershain.de
Kernel Problem bitte um Hilfe
Hallo ich wollte mal Debian wheezy neu aufsetzen. Ich habe mir die Alpha 1 Version des Debian Wheezy installers runter geladen Installation ging auch ohne Probleme aber als ich das neu installierte system Botten wollte blieb der Kernel ohne Fehlermeldung bei Waiting to /dev. hängen. Mein MB ist ein Asus rampage II und meine Grafikkarte ist ein Zotac Nvidia Geforce GTX550Ti AMP OverClocked Edition. Ich denke mal das es an der Nvidia Karte liegt das der Kernel Hängt wie kann ich das Problem lösen? ich kann ja das Linux system nicht mal starten. -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4fd629f0.4060...@aschershain.de
nouveau error with gtx 560
Hello I use debian whezzy with kernel 3.2.19 I have a Zotac GTX 560 mit 2 GB VRam installed an the kernel brings this log and freeze. Can oyu help me ? This is the log from dmseg from fist [drm] line [ 8.379902] [drm] Initialized drm 1.1.0 20060810 [ 8.393686] snd_hda_intel :00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.393730] snd_hda_intel :00:1b.0: irq 71 for MSI/MSI-X [ 8.393748] snd_hda_intel :00:1b.0: setting latency timer to 64 [ 8.403776] Error: Driver 'pcspkr' is already registered, aborting... [ 8.416745] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully [ 8.421620] flexcop-pci: will use the HW PID filter. [ 8.421622] flexcop-pci: card revision 2 [ 8.421627] b2c2_flexcop_pci :07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.433956] DVB: registering new adapter (FlexCop Digital TV device) [ 8.436032] b2c2-flexcop: MAC address = 00:d0:d7:13:9d:40 [ 8.472717] b2c2-flexcop: ISL6421 successfully attached [ 8.553100] MXM: GUID detected in BIOS [ 8.553132] nouveau :02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 8.553136] nouveau :02:00.0: setting latency timer to 64 [ 8.553977] [drm] nouveau :02:00.0: Detected an NVc0 generation card (0x0ce080a1) [ 8.559044] [drm] nouveau :02:00.0: Attempting to load BIOS image from PRAMIN [ 8.574299] ITD1000: successfully identified (ID: 0) [ 8.600796] b2c2-flexcop: ITD1000 successfully attached [ 8.600798] b2c2-flexcop: found 'Samsung S5H1420/PnpNetwork PN1010 DVB-S' . [ 8.600801] DVB: registering adapter 0 frontend 0 (Samsung S5H1420/PnpNetwork PN1010 DVB-S)... [ 8.600911] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.7a/u' at the 'PCI' bus controlled by a 'FlexCopIIb' complete [ 8.664212] [drm] nouveau :02:00.0: ... appears to be valid [ 8.664215] [drm] nouveau :02:00.0: BIT BIOS found [ 8.664217] [drm] nouveau :02:00.0: Bios version 70.24.2d.00 [ 8.664219] [drm] nouveau :02:00.0: TMDS table version 2.0 [ 8.664220] [drm] nouveau :02:00.0: Found Display Configuration Block version 4.0 [ 8.664223] [drm] nouveau :02:00.0: Raw DCB entry 0: 04000310 [ 8.664224] [drm] nouveau :02:00.0: Raw DCB entry 1: 01000312 00020030 [ 8.664226] [drm] nouveau :02:00.0: Raw DCB entry 2: 02011380 [ 8.664228] [drm] nouveau :02:00.0: Raw DCB entry 3: 08011382 00020030 [ 8.664229] [drm] nouveau :02:00.0: Raw DCB entry 4: 02022362 00020010 [ 8.664231] [drm] nouveau :02:00.0: Raw DCB entry 5: 040333b6 0f200010 [ 8.664233] [drm] nouveau :02:00.0: Raw DCB entry 6: 04033372 00020010 [ 8.664235] [drm] nouveau :02:00.0: DCB connector table: VHER 0x40 5 16 4 [ 8.664237] [drm] nouveau :02:00.0: 0: 0x1030: type 0x30 idx 0 tag 0x07 [ 8.664239] [drm] nouveau :02:00.0: 1: 0x00010130: type 0x30 idx 1 tag 0x51 [ 8.664241] [drm] nouveau :02:00.0: 2: 0x2261: type 0x61 idx 2 tag 0x08 [ 8.664243] [drm] nouveau :02:00.0: 3: 0x00220346: type 0x46 idx 3 tag 0x52 [ 8.664247] [drm] nouveau :02:00.0: Parsing VBIOS init table 0 at offset 0x6EB0 [ 8.684210] [drm] nouveau :02:00.0: Parsing VBIOS init table 1 at offset 0x75B0 [ 8.63] [drm] nouveau :02:00.0: unknown i2c port 51 [ 8.688938] [drm] nouveau :02:00.0: 0x8A2D: Failed parsing init table opcode: INIT_I2C_LONG_IF -19 [ 8.689002] [drm] nouveau :02:00.0: Parsing VBIOS init table 2 at offset 0x8C88 [ 8.689004] [drm] nouveau :02:00.0: Parsing VBIOS init table 3 at offset 0x8C92 [ 8.689060] [drm] nouveau :02:00.0: Parsing VBIOS init table 4 at offset 0x8E71 [ 8.689062] [drm] nouveau :02:00.0: Parsing VBIOS init table at offset 0x8ED6 [ 8.708880] [drm] nouveau :02:00.0: 0x8ED6: Condition still not met after 20ms, skipping following opcodes [ 8.708945] [drm] nouveau :02:00.0: unknown i2c port 51 [ 8.709000] [drm] nouveau :02:00.0: 3 available performance level(s) [ 8.709003] [drm] nouveau :02:00.0: 0: core 50MHz shader 101MHz memory 135MHz timing 5 voltage 950mV [ 8.709007] [drm] nouveau :02:00.0: 1: core 405MHz shader 810MHz memory 324MHz timing 4 voltage 950mV [ 8.709011] [drm] nouveau :02:00.0: 3: core 820MHz shader 1640MHz memory 2004MHz timing 3 voltage 962mV-1050mV [ 8.709095] [drm] nouveau :02:00.0: c: core 50MHz shader 101MHz memory 135MHz voltage 950mV [ 8.717909] [TTM] Zone kernel: Available graphics memory: 3060906 kiB. [ 8.717912] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 8.717915] [TTM] Initializing pool allocator. [ 8.717928] [drm] nouveau :02:00.0: Detected 2048MiB VRAM [ 8.717935] mtrr: type mismatch for d800,800 old: write-back new: write-combining [ 8.717949] [drm] nouveau :02:00.0: 512 MiB GART (aperture) [ 8.816926] hda_codec: AD1989B: BIOS auto-probing. [ 8.816986] input: HDA Digital PCBeep as /devices/pci:00/:00:1b.0/input/input5 [ 8.831073] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.
