On Mon, 6 Oct 2008, Finn Thain wrote:
>
> Ignore that post -- it occurred to me that I probably have the daily
> initrd instead of the one from the CD... I will try again.
It turns out that they are the same initrd. Stephen helpfully pointed out
that I needed the "suite=etch-m68k modules=etch-support" bootloader
arguments (and the distribution is of course etch-m68k, hence the 404 when
I changed sid to etch in sources.list). The installer needs the
debian-ports archive selected at the beginning, but the target needs a
normal debian mirror selected at the end.
I tried again with the correct boot args today and now sources.list is
fine (it says etch-m68k not sid) but the other problems remain:
--dlwaypoint and safe-upgrade options are still used though they don't
work in the etch chroot, so the "configure package manager" step got stuck
and "select and install software" failed. Despite that I ended up with a
working system.
Finn
>
> Finn
>
> On Sun, 5 Oct 2008, Finn Thain wrote:
>
> >
> > On Wed, 24 Sep 2008, Stephen R Marenka wrote:
> >
> > >
> > > Both images use lenny d-i. The etch-m68k one installs etch-m68k. The
> > > sid one might install sid. I haven't added the appropriate locales yet
> > > for sid, so who knows.
> >
> > I tried the etch installer on my quadra 630 today (debian mirror at
> > ftp.debian-ports.org).
> >
> > It went well up to the "configure the package manager" step. A couple of
> > times it hung until I killed the stuck process. I looked into it and found
> > that apt-setup-verify passes the --dlwaypoint option which causes a
> > debconf-apt-progress child in the etch chroot to stall. I edited out
> > "--dlwaypoint 100" and re-ran the step. I think it tried to upgrade
> > source.list to sid. It complained about a missing public key with which to
> > verify the sid Release file.
> >
> > After that, the "select and install software" step fails too, because
> > aptitude in the etch chroot doesn't seem to understand "safe-upgrade". So
> > I basically ended up doing "finish installation" at this point.
> >
> > I also found that, on the initrd, busybox seems to have a bug. If you
> > switch to a shell prompt and run ip/wget/tar with incorrect options or no
> > options they all segfault. But they work fine when you pass correct
> > arguments.
> >
> > In the end, I have a bootable etch system, so the installer is 99%
> > working.
> >
> > Only apt-get update says 404 not found for
> > http://ftp.debian-ports.org/debian/dists/etch/main/binary-m68k/{Packages.gz,Sources.gz}
> >
> > and craps out... not sure why.
> >
> > Finn
> >
> >
> >
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
