Re: [Crowbar] bastion network

[Oğuz Yarımtepe]

I am attaching my sample json file.


On Sun, Jun 29, 2014 at 6:35 AM,  wrote:

> I was hoping you’d name all the NICs, IP ranges, Gateways and purposes of
> your network.  It would be helpful if you also copied the relevant parts of
> the network.json file to gist or pastebin.
>
> From: crowbar-bounces On Behalf Of Oguz Yarimtepe
> Sent: Friday, June 27, 2014 12:52 AM
> To: crowbar
> Subject: Re: [Crowbar] bastion network
>
> Adding a bastion network to the network json file before running the
> install script solved.
>
> On Fri, Jun 27, 2014 at 5:17 AM,  rob_hirschf...@dell.com>> wrote:
> The gateway is part of the network json file so you need it to be right
> there.
>
> It would help if you sent details of your planned network config.
>
> This is CB1 so I'm very rusty.  Would be great for the CB1 contributors to
> chime in too
>
>
> Rob H
> 512-909-7219
>
>
>  Original message 
> From: Oğuz Yarımtepe
> Date:06/25/2014 1:49 PM (GMT-08:00)
> To: crowbar
> Subject: [Crowbar] bastion network
> Hi,
> I am trying to add an external interface to a dual mode installation. I
> haven't installed the admin node, but planning to readh the admin node over
> a third interface. When i want to define a bastion network for crowbar
> admin, will i keep router and router_pref at admin part? I want mt default
> gw defined on the third interface, eth3.
>  https://github.com/crowbar/crowbar/wiki/Editing-the-network-json says i
> need to run two commands.
>
> sudo crowbar network allocate_ip default $admin_name bastion admin
>
> sudo chef-client
>
> do they handle the default gw issue if i define router for admin network?
>
>
> --
> Oğuz Yarımtepe
> http://about.me/oguzy
>
>
>
> --
> Oğuz Yarımtepe
> http://about.me/oguzy
>



-- 
Oğuz Yarımtepe
http://about.me/oguzy


bc-template-network.json
Description: application/json
___
Crowbar mailing list
Crowbar@dell.com
https://lists.us.dell.com/mailman/listinfo/crowbar
For more information: http://crowbar.github.com/

[Crowbar] Power via CLI/API using IPMI config on out-of-band BMC net - shout out to Victor

[Rob_Hirschfeld]

All,

It's worth noting the pull that I just accepted into OpenCrowbar brings in the 
IPMI configuration AND creates a direct out-of-band CLI/API command set for 
power management using the BMC network.

This relatively small seeming feature require goes way back in Crowbar history 
and demonstrates the power of the new architecture.

We'll talk more about this on Wednesday's sprint planning, but I wanted to 
share this milestone with the list.

Rob
__
Rob Hirschfeld
Sr. Distinguished Cloud Solution Architect
Dell | Cloud Edge, Data Center Solutions
cell +1 512 909-7219 blog robhirschfeld.com, twitter @zehicle
Please note, I am based in the CENTRAL (-6) time zone

___
Crowbar mailing list
Crowbar@dell.com
https://lists.us.dell.com/mailman/listinfo/crowbar
For more information: http://crowbar.github.com/