Stus-List Harken furler
Help! Lost the feeder on headfoil off the mark iii harken furler Sunday after a race. Part # 962. Can't find a dealer who stocks. Not pre feeder, but part that goes on extrusion. Several emails out to dealers. Bill Walker CnC 36 Pentwater, Mi. Bill Walker ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Harken furler
Help! Lost the feeder on headfoil off the mark iii harken furler Sunday > after a race. Part # 962. Can't find a dealer who stocks. Not pre > feeder, but part that goes on extrusion. Several emails out to dealers. > Bill Walker > CnC 36 > Pentwater, Mi. > > Bill Walker > Give these guys a call: sailingservices.com ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Harken furler
I feel your pain. I am so petrified of losing mine I keep a spare. Try some rigging shops or consignment shops. In my area, it's Zern Rigging 850.261.4129 r...@zernrigging.com or Southern Cross 850.377.1776 or i...@southerncrossmarineservices.com Also try Stix n Rig'n in Kemah, TX or boaters resale shop of Texas. Dennis C. Touche' 35-1 #83 Mandeville, LA Dennis On Tue, Aug 28, 2018 at 9:42 AM WILLIAM WALKER via CnC-List < cnc-list@cnc-list.com> wrote: > Help! Lost the feeder on headfoil off the mark iii harken furler Sunday > after a race. Part # 962. Can't find a dealer who stocks. Not pre > feeder, but part that goes on extrusion. Several emails out to dealers. > Bill Walker > CnC 36 > Pentwater, Mi. > > Bill Walker > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Harken furler
Bill, I show the feeder for a Harken MKIII Unit 1 as part 812. Is this same as yours? The fastener shows as Harken 192. Mauripro lists it. https://www.mauriprosailing.com/us/product/XZHAR812.html Fisheries Supplies says ships in 10-12 days. I recently bought a trim cap for my unit from apsltd.com. Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue, Aug 28, 2018 at 9:42 AM WILLIAM WALKER via CnC-List < cnc-list@cnc-list.com> wrote: > Help! Lost the feeder on headfoil off the mark iii harken furler Sunday > after a race. Part # 962. Can't find a dealer who stocks. Not pre > feeder, but part that goes on extrusion. Several emails out to dealers. > Bill Walker > CnC 36 > Pentwater, Mi. > > Bill Walker > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Harken furler
On Tuesday, August 28, 2018 Dennis C. via CnC-List wrote: Bill, I show the feeder for a Harken MKIII Unit 1 as part 812. Is this same as yours? The fastener shows as Harken 192. Mauripro lists it. https://www.mauriprosailing.com/us/product/XZHAR812.html Fisheries Supplies says ships in 10-12 days. I recently bought a trim cap for my unit from apsltd.com. Dennis C. Touche' 35-1 #83 Mandeville, LA Dennis, Not sure which mark iii I have, there are several parts diagrams for unit 1, as well as other versions. The one you suggest looks like it, but so do others. They all have different feeder part #s..anyone know how to figure out which.mark iii I have..don t see any markings other than harken mark iii.. Bill Walker ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray Bill Walker___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Harken furler
For a 36 you probably have a Unit 1, possibly a Unit 1.5. MKIII's have a black metal cover surrounding the drum, screws to hold the extrusions together. Did you call Harken directly? Excellent customer support from my experience. Dennis C. On Tue, Aug 28, 2018 at 10:37 AM WILLIAM WALKER via CnC-List < cnc-list@cnc-list.com> wrote: > Not sure which mark iii I have, there are several parts diagrams for > unit 1, as well as other versions. The one you suggest looks like it, but > so do others. They all have different feeder part #s..anyone know how to > figure out which.mark iii I have..don t see any markings other than harken > mark iii.. > > Bill Walker > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Harken furler
Bill,Try port Townsend Rigging+1-360-385-6330They might have one laying around. Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA. Original message From: WILLIAM WALKER via CnC-List Date: 8/28/18 07:37 (GMT-08:00) To: cnc-list@cnc-list.com Cc: WILLIAM WALKER Subject: Stus-List Harken furler Help! Lost the feeder on headfoil off the mark iii harken furler Sunday after a race. Part # 962. Can't find a dealer who stocks. Not pre feeder, but part that goes on extrusion. Several emails out to dealers. Bill Walker CnC 36 Pentwater, Mi. Bill Walker ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Stus-List Lewmar screen
Does anyone have a DIY solution for a screen to fit a Lewmar inside opening port? Delivering a boat with 12 X 5 or 6 inch ports. Len Sent from my mobile device. ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Stus-List Harken furler
Thanks to everyone. Called Harken and determined that my furler was Mark III, unit 1 as Dennis suspected. 7.5 inch drum. Feeder is Part #812, again as Dennis said. Found at Fawcett Marine for $80 and free shipping. Thanks to all..wish harken had a better design on this... Never try to remove after gin and tonic time post race.. BILL WALKER C N C 36 Pentwater, Mi Bill Walker ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Harken furler
Hi Bill When we are switching from Race to cruise and vice versa I always have to remove the feeder to raise or lower the collar. Is a major PITA for just the reason you describe. I ONLY do this at my slip where at least a diver could locate the part should it go overboard. I also purchased a spare the day I saw one at a local chandlery as I knew the part for mine is no longer made. I think my furler may be older than yours. Mike Persistence Halifax, NS From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of WILLIAM WALKER via CnC-List Sent: Tuesday, August 28, 2018 4:05 PM To: cnc-list@cnc-list.com Cc: WILLIAM WALKER Subject: Stus-List Harken furler Thanks to everyone. Called Harken and determined that my furler was Mark III, unit 1 as Dennis suspected. 7.5 inch drum. Feeder is Part #812, again as Dennis said. Found at Fawcett Marine for $80 and free shipping. Thanks to all..wish harken had a better design on this... Never try to remove after gin and tonic time post race.. BILL WALKER C N C 36 Pentwater, Mi Bill Walker ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Harken furler
Final thought, ordered at about 2:30, Fawcett Marine shipped by 4, arriving from east coast to.michigam Thursday...what a world we live in. Bill Walker On Tuesday, August 28, 2018 WILLIAM WALKER via CnC-List wrote: Help! Lost the feeder on headfoil off the mark iii harken furler Sunday after a race. Part # 962. Can't find a dealer who stocks. Not pre feeder, but part that goes on extrusion. Several emails out to dealers. Bill Walker CnC 36 Pentwater, Mi. Bill Walker ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Lewmar screen
You just looking for something temporary? How about this?: https://www.lowes.com/pd/Frost-King-Common-15-in-x-24-in-x-0-1875-in-Actual-15-in-x-24-in-x-Washable-Cut-To-Fit-Air-Filter/1196229 Cut to fit. Will still pass air but not bugs. BTW, it's what I use for the intake filter for Touche's CruisAir air conditioner. Dennis C. Touche' 35-1 #83 Mandeville, LA On Tue, Aug 28, 2018 at 12:30 PM Len Mitchell via CnC-List < cnc-list@cnc-list.com> wrote: > Does anyone have a DIY solution for a screen to fit a Lewmar inside > opening port? Delivering a boat with 12 X 5 or 6 inch ports. Len > > Sent from my mobile device. > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Harken furler
I’m a regular customer at Fawcett’s. They are awesome! Joel On Tue, Aug 28, 2018 at 5:33 PM WILLIAM WALKER via CnC-List < cnc-list@cnc-list.com> wrote: > Final thought, ordered at about 2:30, Fawcett Marine shipped by 4, > arriving from east coast to.michigam Thursday...what a world we live in. > > Bill Walker > -- > On Tuesday, August 28, 2018 WILLIAM WALKER via CnC-List < > cnc-list@cnc-list.com> wrote: > > Help! Lost the feeder on headfoil off the mark iii harken furler Sunday > after a race. Part # 962. Can't find a dealer who stocks. Not pre > feeder, but part that goes on extrusion. Several emails out to dealers. > Bill Walker > CnC 36 > Pentwater, Mi. > > Bill Walker > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Joel 301 541 8551 ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List 3D Print a Ritchie Compass Replacement Cover
I just turned 35 and have been living on my 36' for two years:) Curious to hear how well the 3d printed material holds up in the marine environment. Looks great! On Wed, Aug 15, 2018 at 8:00 AM, Bill Coleman via CnC-List < cnc-list@cnc-list.com> wrote: > Holy Crap, a C&C owner under 60! > > > > That was my first take away from your great video – > > > > Nice Binnacle Cover BTW . . . > > > > Bill Coleman > > C&C 39 Erie, PA[image: animated_favicon1] > > > > > -- *Jacob Fuerst* *1978 C&C 36* * Ventura, CA* *303-520-4669* ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
