[chirp_users] Problems with Baofeng GT-1 and beat shift(scramble) option
Hello to all, I bought two Baofeng GT-1 to test the beat shift(scramble) option, I tried with chirp and baofeng original software, I can enable or disable this feature but scramble does not occur, the voice is always sent in plain. Can anybody help me? Best regards. Ernesto a.k.a. Xload ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
[chirp_users] Kenwood TH-K40E
Hello, Is Chirp capable of programming Kenwood TH-K40E? Best Regards. Ernesto Xload ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] Kenwood TH-K40E
A lot of thanks Dan, I asked because I think that would be compatible with other Kenwood model. 73 El mié., 8 may. 2019 a las 20:29, Dan Clemmensen () escribió: > Please look at the CHIRP Home Page: > https://chirp.danplanet.com/projects/chirp/wiki/Home > No, it's not supported. Also look at the FAQ (second FAQ question) >https://chirp.danplanet.com/projects/chirp/wiki/FAQ > > On Wed, May 8, 2019 at 11:21 AM Ernesto Xload wrote: > >> Hello, >> >> Is Chirp capable of programming Kenwood TH-K40E? >> >> Best Regards. >> >> Ernesto Xload >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Dan Clemmensen at danclemmen...@gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com > > ___ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ernesto Xload at xload...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] Baofeng-uv82
il to >> chirp_users-unsubscr...@intrepid.danplanet.com >> >> >> ___ >> chirp_users mailing >> listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Steve Thomas at ste...@alertcpr.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com >> >> -- >> Steve Thomas, EMT-P >> Executive Director >> AlertCPR Emergency Training & Supply >> Office 866-569-7139 Cell 214-912-7690ste...@alertcpr.com >> >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Jardy at jard...@yahoo.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com >> >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Billy Shirer at bshire...@gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com >> >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Dan Jolley at oldhippie1...@yahoo.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Billy Shirer at bshire...@gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com >> >> -- >> >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Glenn at glenner...@cableone.net >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Billy Shirer at bshire...@gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com >> >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Dan Jolley at oldhippie1...@yahoo.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Billy Shirer at bshire...@gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com > > ___ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ernesto Xload at xload...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
[chirp_users] "RF power set" in Yaesu FT-857
I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" value correspond to the output power in watts? Best regards 73 ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] "RF power set" in Yaesu FT-857
A lot of thanks Neil. I can select 5-100 in Hf and 6m, 5-50 in VHF and 2-20 in UHF. Best regards. El mar., 20 ago. 2019 a las 7:50, Neil B () escribió: > Yes it does, you bung in 10, its set to 10w. 15, 15w etc. 4 lines there, > hf 6,v and u. > > > > *From:* chirp_users-boun...@intrepid.danplanet.com < > chirp_users-boun...@intrepid.danplanet.com> *On Behalf Of *Ernesto Xload > *Sent:* 19 August 2019 23:00 > *To:* Discussion of CHIRP > *Subject:* [chirp_users] "RF power set" in Yaesu FT-857 > > > > I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" > value correspond to the output power in watts? > > > > Best regards > > 73 > ___ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ernesto Xload at xload...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] BAOFENG UV-5R8W
I've a BAOFENG UV-5R8W and I can program It without only problem with chirp. I'm using Xubuntu 18.04 and current daily CHIRP version. Best regards. El jue., 9 ene. 2020 a las 4:43, Phil () escribió: > On 9/1/20 1:59 pm, Troy Hunter wrote: > > though Windows 10 says there is no problem with the cable, there still > > might be a driver problem? > > You might also consider that you have a fake radio. I eventually > discovered that I have one. It works but the radio is not programmable > via Chirp. > > > I couldn't believe that there would be such a thing as a fake copy of a > Chinese radio. Is that Kama? > > > -- > > Regards, > Phil > > ___ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ernesto Xload at xload...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] chirp connecting to UV-5R from Ubuntu 16.04 on Lenovo Carbon X1
A few years ago I bought a cable that didn't work, the USB connector was poorly soldered, open it and carefuly review it. 73's El lun., 17 feb. 2020 a las 12:24, Tom Henderson () escribió: > Just double checking here. The log messages below show the cable > connecting, and then disconnecting. Had you disconnected the cable again > before running dmesg, or did the cable fail? > > Tom Henderson > > On 2/16/20 11:56 PM, Kheong Sann CHAN wrote: > > The tty port is found when I plug it in: > $ dmesg | grep tty > [ 7527.188154] usb 1-2: pl2303 converter now attached to ttyUSB0 > [ 7548.490452] pl2303 ttyUSB0: pl2303 converter now *disconnected* from > ttyUSB0 > > ___ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ernesto Xload at xload...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
[chirp_users] How to read Kenwood TH-D7?
Hello, How can I read Kenwood my TH-D7 fron CHIRP? Best regards ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] How to read Kenwood TH-D7?
A lot of thanks David, El mar., 5 may. 2020 a las 3:58, David Evans () escribió: > Ernesto, > > Have you used Chirp with other radios? > > I have a Kenwood TH-D7, as well, and Chirp reads and programs it well. > Chirp handles the TH-D7 a little differently than most radios. You do not > have to write your data to the radio because it is written to the radio as > soon as you enter it into Chirp. > > Thanks, > David > kd7uch@ gmail.com > > > > > > > On Mon, May 4, 2020 at 2:59 PM Ernesto Xload wrote: > >> Hello, >> >> How can I read Kenwood my TH-D7 fron CHIRP? >> >> Best regards >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to David Evans at kd7...@arrl.net >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com > > ___ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ernesto Xload at xload...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] How to read Kenwood TH-D7?
hello again, I made a programming cable fom a pl2303 adapter and 2.5mm 3 pin jack, I connected the pl2303 tx to radio rx and pl2303 rx to radio tx, unfortunately I only see this at chirp console: ERROR: Giving up Traceback (most recent call last): chirp.errors.RadioError: No response from radio What is happening? Best regards. El dom., 10 may. 2020 a las 20:04, Ernesto Xload () escribió: > A lot of thanks David, > > El mar., 5 may. 2020 a las 3:58, David Evans () > escribió: > >> Ernesto, >> >> Have you used Chirp with other radios? >> >> I have a Kenwood TH-D7, as well, and Chirp reads and programs it well. >> Chirp handles the TH-D7 a little differently than most radios. You do not >> have to write your data to the radio because it is written to the radio as >> soon as you enter it into Chirp. >> >> Thanks, >> David >> kd7uch@ gmail.com >> >> >> >> >> >> >> On Mon, May 4, 2020 at 2:59 PM Ernesto Xload wrote: >> >>> Hello, >>> >>> How can I read Kenwood my TH-D7 fron CHIRP? >>> >>> Best regards >>> ___ >>> chirp_users mailing list >>> chirp_users@intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to David Evans at kd7...@arrl.net >>> To unsubscribe, send an email to >>> chirp_users-unsubscr...@intrepid.danplanet.com >> >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Ernesto Xload at xload...@gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com > > ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] Recommended radio for adding to chirp
Hello Eric, You con program your Retevis H777 and H777s with chirp just selecting Baofeng BF-888 radio. Chirp is available for Windows and OS X platforms at https://chirp.danplanet.com/projects/chirp/wiki/Download Best regards El dom, 21 feb 2021 a las 9:55, Eric Oyen via chirp_users (< chirp_users@intrepid.danplanet.com>) escribió: > Hello users and devs. > > I recently acquired some new radios. These are definitely for the prepper > set (as I am one besides being a ham). > > The radio is the Retevus H-777 and it’s little brother, the H-777s. Both > are programmable using a standard 2 pin kenwood style programming cable. I > recently asked for assistance from that company because their in house > software had some issues that prevented it working with my screen reader > (much like your package which has the same issues btw). However, with a bit > of visual assistance, I was able to reprogram these radios for the 70cm ham > band. Now, I gave that company the primary web site and asked if they would > send over the data and let you guys have a whack at it. Maybe they will and > maybe they won’t. If they do, then you know who to thank for it. > > On another matter, I am going to ask this again, are you guys ever going > to make your package properly screen reader accessible on either the > windows or OS X platforms? I know it is on Linux, but then, I am a techie. > However, there are many blind or visually impaired hams out there (as well > as others in the GMRS, FRS and other communities) that aren’t and have to > depend on outside people to program their equipment. Now, I know all the > excuses, including complexity of coding, etc. However, there are code > snippets and libraries available that can be incorprated into the primary > CHIRP program without too much difficulty. Lord knows, I’ve done enough > reading on it. However, I have no experience in coding, so it would be > inappropriate to ask me to fork the project just to add this functionality. > Now, I will probably hear from more than a few of you stating that I > represent a “niche market”. That may have been true 20 years ago, but not > anymore. Our numbers are growing and we are appearing in more communities. > Now, far be it for me to point this out, but seriously, wouldn’t you want > to be on board with the Woke Train here, touting your software package as > diversity and inclusive compliant? It would certainly make your package > more appealing than it already is. Of course, if you don’t want to be > inclusive or exercise some action toward diversity, that is your decision. > In any case, I thought I would point this out. > > Anyway, I hope that company I wrote to sends you the data to add the H777 > and it’s cousin the H777s to you to add it to the supported radios matrix. > > Oh, and if you want to experiment with a set, they can be had for cheap on > amazon (about $35 for a pair of the H-777s radios). > > Thank you, > > DE n7zzt Eric > > ___ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ernesto Xload at xload...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] Recommended radio for adding to chirp
Unfortunatelly I only use linux, but somebody will help you :) Best regards. El dom, 21 feb 2021 a las 11:39, Eric Oyen () escribió: > Ok, that’s new info. thanks. > > However, I have tried Chirp on both Windows and OS X platforms and the > program just won’t work with any of the available screen readers on those > platforms (the content pane is invisible and even the pull down menus don’t > seem to want to be responsive (in windows anyway). > > Again, thanks. > > DE n7zzt Eric > > > On Feb 21, 2021, at 3:27 AM, Ernesto Xload wrote: > > Hello Eric, > > You con program your Retevis H777 and H777s with chirp just selecting > Baofeng BF-888 radio. > > Chirp is available for Windows and OS X platforms at > https://chirp.danplanet.com/projects/chirp/wiki/Download > > Best regards > > El dom, 21 feb 2021 a las 9:55, Eric Oyen via chirp_users (< > chirp_users@intrepid.danplanet.com>) escribió: > >> Hello users and devs. >> >> I recently acquired some new radios. These are definitely for the prepper >> set (as I am one besides being a ham). >> >> The radio is the Retevus H-777 and it’s little brother, the H-777s. Both >> are programmable using a standard 2 pin kenwood style programming cable. I >> recently asked for assistance from that company because their in house >> software had some issues that prevented it working with my screen reader >> (much like your package which has the same issues btw). However, with a bit >> of visual assistance, I was able to reprogram these radios for the 70cm ham >> band. Now, I gave that company the primary web site and asked if they would >> send over the data and let you guys have a whack at it. Maybe they will and >> maybe they won’t. If they do, then you know who to thank for it. >> >> On another matter, I am going to ask this again, are you guys ever going >> to make your package properly screen reader accessible on either the >> windows or OS X platforms? I know it is on Linux, but then, I am a techie. >> However, there are many blind or visually impaired hams out there (as well >> as others in the GMRS, FRS and other communities) that aren’t and have to >> depend on outside people to program their equipment. Now, I know all the >> excuses, including complexity of coding, etc. However, there are code >> snippets and libraries available that can be incorprated into the primary >> CHIRP program without too much difficulty. Lord knows, I’ve done enough >> reading on it. However, I have no experience in coding, so it would be >> inappropriate to ask me to fork the project just to add this functionality. >> Now, I will probably hear from more than a few of you stating that I >> represent a “niche market”. That may have been true 20 years ago, but not >> anymore. Our numbers are growing and we are appearing in more communities. >> Now, far be it for me to point this out, but seriously, wouldn’t you want >> to be on board with the Woke Train here, touting your software package as >> diversity and inclusive compliant? It would certainly make your package >> more appealing than it already is. Of course, if you don’t want to be >> inclusive or exercise some action toward diversity, that is your decision. >> In any case, I thought I would point this out. >> >> Anyway, I hope that company I wrote to sends you the data to add the H777 >> and it’s cousin the H777s to you to add it to the supported radios matrix. >> >> Oh, and if you want to experiment with a set, they can be had for cheap >> on amazon (about $35 for a pair of the H-777s radios). >> >> Thank you, >> >> DE n7zzt Eric >> >> ___ >> chirp_users mailing list >> chirp_users@intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Ernesto Xload at xload...@gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscr...@intrepid.danplanet.com > > > ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
[chirp_users] Retevis RB618
Hi all, I would like to know if the Retevis RB618 is supported by chirp. Thank you very much ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] BF-898Plus not one of all listed radios in Chirp is working for this radio.
Hello Andre, You can try to program with chirp as Baofeng BF-888 Best regards. El mié, 21 jul 2021 a las 21:39, escribió: > Does anyone hass an other solution? > Thanks for helping me. I should have to reprogrm around +- 40 radios to > reprogram. For disaster area in Belgium. > They need them to help looking for missing people. And farm animals in the > next days. > ___ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ernesto Xload at xload...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
Re: [chirp_users] bf-888s programming data protocol for arduino project
Hi, I think it would be better to use a module that can be easily controlled with an arduino, such as a dra-818. Best regards. El mar, 18 ene 2022 a las 7:58, escribió: > > Newbie here, so haven't found how to search topics yet. > > I have a project where I have an arduino housed in an enclosure with a > baofeng bf-888s. I want to be able to leave the radio on channel one, > and program both pre-stored frequencies, as well as manually entered > frequencies. The arduino is tied to the audio in and out of the > radio. I know enough about arduino coding to generate square wave > output and detect square wave input, vary frequency of the data > pulses, duty cycle, etc. > > What I don't know is what is the protocol for sending a "code plug" to > the BF-888s. Anyone know where to steer me? Mr Google doesn't seem > to understand my question. > > ___ > chirp_users mailing list > chirp_users@intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ernesto Xload at xload...@gmail.com > To unsubscribe, send an email to > chirp_users-unsubscr...@intrepid.danplanet.com > ___ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to arch...@mail-archive.com at arch...@mail-archive.com To unsubscribe, send an email to chirp_users-unsubscr...@intrepid.danplanet.com
