Problem with restore

[Tandon K]

I am unable to restore a active file from backup 
Able to mount tapes but getting 0bytes of data restored.

My server version is TIVsm-server-6.2.3-0

and client TIVsm-BA-6.2.1-0Disclaimer: 
This email message (including attachments if any) may contain privileged, 
proprietary, confidential information, which may be exempt from any kind of 
disclosure whatsoever and is intended solely for the use of addressee (s). If 
you are not the intended recipient, kindly inform us by return e-mail and also 
kindly disregard the contents of the e-mail, delete the original message and 
destroy any copies thereof immediately. You are notified that any 
dissemination, distribution or copying of this communication is strictly 
prohibited unless approved by the sender.

DQ Entertainment (DQE) has taken every reasonable precaution to minimize the 
risk of transmission of computer viruses with this e-mail; DQE is not liable 
for any damage you may sustain as a result of any virus in this e-mail. DQE 
shall not be liable for the views expressed in the e-mail. DQE reserves the 
right to monitor and review the content of all messages sent to or from this 
e-mail address

Re: full library?

[Dan Olson]

The web interface must have improved, because it does clarify which is 
import/export
vs storage slot.  The confusing thing is it will let you configure a partition 
of
size X as long as you have the room, but the slots aren't actually usable until
empty terapacks are present in those chambers.  I'm surprised there isn't some
counter at least on the web interface that shows available vs absent slots.


Daniel Murphy-Olson
Systems Administrator
Mathematics & Computer Science Division
Argonne National Laboratory

- Original Message -
> From: "Skylar Thompson" 
> To: ADSM-L@VM.MARIST.EDU
> Sent: Monday, November 26, 2012 8:28:06 PM
> Subject: Re: [ADSM-L] full library?
> Are those 890 slots inclusive of the import/export packs? Back when I
> worked with T950s, I remember that their web interface wouldn't make
> it
> clear whether you were looking at storage+import/export or just
> storage
> slots.
>
> On 11/26/2012 5:07 PM, Dan Olson wrote:
> > Hi All...
> >
> > So I've run into a strange problem. I've got a tsm server attached
> > to a spectra T950 library, with 890 slots in the partition.
> > Tsm knows about 870 tapes, verified with select count(*) from
> > libvolumes.
> >
> > When I go to checkin tapes from the CAP I get the message "ANR8382W
> > Library 1 is now full."
> >
> > I've audited the library and compared the inventory, and tsm's state
> > is consistent with the library.
> >
> > Any ideas? Anyone know if that full message originates from TSMs
> > state or a library return?
> >
> > 
> > Daniel Murphy-Olson
> > Systems Administrator
> > Mathematics & Computer Science Division
> > Argonne National Laboratory
> >
>
>
> --
> -- Skylar Thompson (skyl...@u.washington.edu)
> -- Genome Sciences Department, System Administrator
> -- Foege Building S048, (206)-685-7354
> -- University of Washington School of Medicine

Strange dirmc

[Robert Ouzen]

Hi to all
I have a nodename who backup the directory to another management class  in my 
case mgeducation

I have on my inclexcl file this statement:  include /export/home/*mglaw

I tried in the dsm.sys to put dirmc mglaw but still the directory is written to 
mgeducation (the data is written to mglaw correctly)

I of course after any change I stop  the dsmcad and reload it but the same !

I double check the management and the backup copygroup they point to the 
correct storage DD_LAW (Activate too)

All my another clients works fine !

My Tsm Server version 6.3.2.0 and client version 6.1.0

Regards Robert

Re: netezza nzbackup connector for TSM

[Tim Brown]

Is the TSM for DB Client you refer to "the Connector". So far I prefer just 
native TSM with nzbackups.  
With the 6 figure price tag, is the TSM for DB Client that you refer to the 
greatest $ amt of the 2.


Thanks,
 
Tim 

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
Tailor, Mahesh C.
Sent: Monday, 26 November, 2012 5:14 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: netezza nzbackup connector for TSM

Hello.

On a similar thread: we are in the process of acquiring Netezza and will need 
to back it up to TSM.  We were told of the TSM Connector.  In trying to make 
sure we are in TSM license compliance, we were told that we would need to 
license both the TSM for BA client and the TSM for DB client.  If we were to 
license both TSM products, we are looking at cost in the six-figures. Can 
someone please advise as to how the TSM licensing works for this product?

Thanks in advance.
Mahesh


From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Tim Brown 
[tbr...@cenhud.com]
Sent: Monday, October 29, 2012 11:34
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] netezza nzbackup connector for TSM

I am attempting to get the netezza backup utility working with tsm. They have a 
connector that allows backing up netezza backups directly into tsm.

Has anyone tried this and got it to work.

./nzbackup -u user -pw psw -db TDS -connector tivioli  -connectorArgs 
"TSM_PASSWORD=x"


Error: unable to connect to host 'localhost', port '5483' - Connection refused.


Thanks,

Tim Brown
Supervisor Computer Operations
Central Hudson Gas & Electric
284 South Ave
Poughkeepsie, NY 12601
Email: tbr...@cenhud.com <>
Phone: 845-486-5643
Fax: 845-486-5921
Cell: 845-235-4255


"This message contains confidential information and is only for the intended 
recipient. If the reader of this message is not the intended recipient, or an 
employee or agent responsible for delivering this message to the intended 
recipient, please notify the sender immediately by replying to this note and 
deleting all copies and attachments."



Notice: The information and attachment(s) contained in this communication are 
intended for the addressee only, and may be confidential and/or legally 
privileged. If you have received this communication in error, please contact 
the sender immediately, and delete this communication from any computer or 
network system. Any interception, review, printing, copying, re-transmission, 
dissemination, or other use of, or taking of any action upon this information 
by persons or entities other than the intended recipient is strictly prohibited 
by law and may subject them to criminal or civil liability. Carilion Clinic 
shall not be liable for the improper and/or incomplete transmission of the 
information contained in this communication or for any delay in its receipt.

Re: AW: [ADSM-L] 6.4 docs

[Angela Robertson]

The TSM 6.4 information center has been packaged and sent for posting to
the following site:
ftp://ftp.software.ibm.com/storage/tivoli-storage-management/techprev/infocenter/


I was told that it should be available in the next 24 hours. I'll check the
site throughout the day to ensure the package is posted. Angela


Angela Robertson
IBM Software Group, Tivoli Software
Durham, NC 27703
aprob...@us.ibm.com

“We are what we repeatedly do. Excellence, then, is not an act, but a
habit.” - Aristotle

"ADSM: Dist Stor Manager"  wrote on 11/21/2012
04:18:10 PM:

> "J. Pohlmann" 
> Sent by: "ADSM: Dist Stor Manager" 
>
> 11/21/2012 04:18 PM
>
> Please respond to
> "ADSM: Dist Stor Manager" 
>
> To
>
> ADSM-L@vm.marist.edu,
>
> cc
>
> Subject
>
> Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
>
> A request to development - could someone please package the TSM 6.4
> Infocenter into a downloadable package and put in the techprev
> directory on the ftp site along with the other downoadable Infocenters.
>
> Thanks.
>
> Regards,
>
> Joerg Pohlmann
>
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On
> Behalf Of Angela Robertson
> Sent: Tuesday, November 20, 2012 06:40
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
>
> The 6.4 Info Center is available:
> http://pic.dhe.ibm.com/infocenter/tsminfo/v6r4/index.jsp
>
> The ibm.com team has been contacted and the problem should not
> happen again. That said, if the problem persists, thanks for your
> patience. No one wants the site down... Angela
>
> 
> Angela Robertson
> IBM Software Group, Tivoli Software
> Durham, NC 27703
> aprob...@us.ibm.com
> 
> “We are what we repeatedly do. Excellence, then, is not an act, but
> a habit.” - Aristotle
>
> "ADSM: Dist Stor Manager"  wrote on 11/20/2012
> 03:33:15 AM:
>
> > Rainer Holzinger  Sent by: "ADSM: Dist Stor
> > Manager" 
> >
> > 11/20/2012 03:33 AM
> >
> > Please respond to
> > "ADSM: Dist Stor Manager" 
> >
> > To
> >
> > ADSM-L@vm.marist.edu,
> >
> > cc
> >
> > Subject
> >
> > [ADSM-L] AW: [ADSM-L] 6.4 docs
> >
> > Hi Andy,
> >
> > for me the 6.4 Info Center is still not working.
> > Following the link still results in "service temporarily unavailable".
> >
> > Best regards,
> > Rainer
> >
> > -Ursprüngliche Nachricht-
> > Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im Auftrag
> > von Andrew Raibeck
> > Gesendet: Montag, 19. November 2012 20:37
> > An: ADSM-L@VM.MARIST.EDU
> > Betreff: Re: [ADSM-L] 6.4 docs
> >
> > 6.4 Info Center is back up.
> >
> > Best regards,
> >
> > Andy Raibeck
> > IBM Software Group
> > Tivoli Storage Manager Client Product Development Level 3 Team Lead
> > Internal Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS Internet
> > e-mail: stor...@us.ibm.com
> >
> > IBM Tivoli Storage Manager support web page:
> >
>
http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Stor

>
> > age_Manager
> >
> > "ADSM: Dist Stor Manager"  wrote on 2012-11-19
> > 11:30:47:
> >
> > > From: Stefan Folkerts 
> > > To: ADSM-L@vm.marist.edu,
> > > Date: 2012-11-19 11:34
> > > Subject: Re: 6.4 docs
> > > Sent by: "ADSM: Dist Stor Manager" 
> > >
> > > Simon is the man of the day for me! :-D
> > >
> > >
> > > On Mon, Nov 19, 2012 at 9:37 AM, Erwann Simon 
> > wrote:
> > >
> > > > Hi all,
> > > >
> > > > It's not working for me either.
> > > >
> > > > Here's a dropbox link to the new publications (.pdf):
> > > > http://db.tt/LWQajxwi
> > > >
> > > > You'll also find a quick review of the new functions.
> > > >
> > > > Regards,
> > > > Erwann
> > > >
> > > >
> > > > Remco Post  a écrit :
> > > >
> > > > >Hi all,
> > > > >
> > > > >anyone getting something useful from
> > > > >http://pic.dhe.ibm.com/infocenter/tsminfo/v6r4 ?
> > > >
> > > > --
> > > > Envoyé de mon téléphone Android avec K-9 Mail. Excusez la brièveté.
> > > >
> > >=
> >
>

Re: Strange dirmc

[Robert Ouzen]

Hi Andy

Thank you for your fast reply ...
As you see the dirmc is point to the correct management mglaw

q option dirmc
DIRMC: MGLAW

I have only one stanza in this client

SErvernamelawsrv
   COMMmethod TCPip
   TCPPort1500
   TCPServeraddress   XXX.XXX.XXX.XXX
   TCPCLIENTADDRESS YYY..YYY.YYY
   Passwordaccess Generate
   Nodename   lawsrv
Dirmc mglaw
INCLEXCL "/opt/tivoli/tsm/client/ba/bin/backup.excl"
   Schedmode  prompted
   Schedlogname   "/tmp/dsmsched.log"
   Errorlogname   "/tmp/dsmerror.log"
   schedlogr  7 D
   errorlogr  7 D
   Resourceutilization 8
   managedserviceswebclient  schedule

About the optiontset 

tsm: POSTBACK>q cloptset optionset

OPTIONSET   ROBERT

QUIET   0 Yes yes
RESOURCEUTILIZATION 0Yes 4
SCHEDMODE  0 No prompted
SUBDIR0 Yes yes

Regards,
Robert

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Andrew 
Raibeck
Sent: Tuesday, November 27, 2012 4:19 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Strange dirmc

Robert,

Do you have more than one SERVERNAME stanza in dsm.sys? Are you sure that the 
DIRMC option is in the correct stanza? Is it possible that DIRMC is being 
overridden by a client option set?

Try this test, to see what DIRMC value is in effect. From the command line, 
issue this command:

   dsmc query option dirmc

What does it show?

You might need to specify the correct SERVERNAME stanza:

   dsmc query option dirmc -servername=stanza_name

where stanza_name is the SERVERNAME stanza in your dsm.sys file.

Best regards,

Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Product Development Level 3 Team Lead Internal 
Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS Internet e-mail: 
stor...@us.ibm.com

IBM Tivoli Storage Manager support web page:
http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Storage_Manager

"ADSM: Dist Stor Manager"  wrote on 2012-11-27
08:27:35:

> From: Robert Ouzen 
> To: ADSM-L@vm.marist.edu,
> Date: 2012-11-27 08:38
> Subject: Strange dirmc
> Sent by: "ADSM: Dist Stor Manager" 
>
> Hi to all
> I have a nodename who backup the directory to another management class  
> in my case mgeducation
>
> I have on my inclexcl file this statement:  include /export/home/*
mglaw
>
> I tried in the dsm.sys to put dirmc mglaw but still the directory is 
> written to mgeducation (the data is written to mglaw correctly)
>
> I of course after any change I stop  the dsmcad and reload it but the
same !
>
> I double check the management and the backup copygroup they point to 
> the correct storage DD_LAW (Activate too)
>
> All my another clients works fine !
>
> My Tsm Server version 6.3.2.0 and client version 6.1.0
>
> Regards Robert
>

Re: AW: [ADSM-L] 6.4 docs

[Dolinski, Peter S]

I don't see any TSM6.4 folder there.

Regards,

Peter 
(206) 616-0787



-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Angela 
Robertson
Sent: Tuesday, November 27, 2012 6:56 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] AW: [ADSM-L] 6.4 docs

The TSM 6.4 information center has been packaged and sent for posting to the 
following site:
ftp://ftp.software.ibm.com/storage/tivoli-storage-management/techprev/infocenter/


I was told that it should be available in the next 24 hours. I'll check the 
site throughout the day to ensure the package is posted. Angela


Angela Robertson
IBM Software Group, Tivoli Software
Durham, NC 27703
aprob...@us.ibm.com

“We are what we repeatedly do. Excellence, then, is not an act, but a habit.” - 
Aristotle

"ADSM: Dist Stor Manager"  wrote on 11/21/2012
04:18:10 PM:

> "J. Pohlmann" 
> Sent by: "ADSM: Dist Stor Manager" 
>
> 11/21/2012 04:18 PM
>
> Please respond to
> "ADSM: Dist Stor Manager" 
>
> To
>
> ADSM-L@vm.marist.edu,
>
> cc
>
> Subject
>
> Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
>
> A request to development - could someone please package the TSM 6.4 
> Infocenter into a downloadable package and put in the techprev 
> directory on the ftp site along with the other downoadable Infocenters.
>
> Thanks.
>
> Regards,
>
> Joerg Pohlmann
>
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf 
> Of Angela Robertson
> Sent: Tuesday, November 20, 2012 06:40
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
>
> The 6.4 Info Center is available:
> http://pic.dhe.ibm.com/infocenter/tsminfo/v6r4/index.jsp
>
> The ibm.com team has been contacted and the problem should not happen 
> again. That said, if the problem persists, thanks for your patience. 
> No one wants the site down... Angela
>
> 
> Angela Robertson
> IBM Software Group, Tivoli Software
> Durham, NC 27703
> aprob...@us.ibm.com
> 
> “We are what we repeatedly do. Excellence, then, is not an act, but a 
> habit.” - Aristotle
>
> "ADSM: Dist Stor Manager"  wrote on 11/20/2012
> 03:33:15 AM:
>
> > Rainer Holzinger  Sent by: "ADSM: Dist Stor 
> > Manager" 
> >
> > 11/20/2012 03:33 AM
> >
> > Please respond to
> > "ADSM: Dist Stor Manager" 
> >
> > To
> >
> > ADSM-L@vm.marist.edu,
> >
> > cc
> >
> > Subject
> >
> > [ADSM-L] AW: [ADSM-L] 6.4 docs
> >
> > Hi Andy,
> >
> > for me the 6.4 Info Center is still not working.
> > Following the link still results in "service temporarily unavailable".
> >
> > Best regards,
> > Rainer
> >
> > -Ursprüngliche Nachricht-
> > Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im 
> > Auftrag von Andrew Raibeck
> > Gesendet: Montag, 19. November 2012 20:37
> > An: ADSM-L@VM.MARIST.EDU
> > Betreff: Re: [ADSM-L] 6.4 docs
> >
> > 6.4 Info Center is back up.
> >
> > Best regards,
> >
> > Andy Raibeck
> > IBM Software Group
> > Tivoli Storage Manager Client Product Development Level 3 Team Lead 
> > Internal Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS Internet
> > e-mail: stor...@us.ibm.com
> >
> > IBM Tivoli Storage Manager support web page:
> >
>
http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Stor

>
> > age_Manager
> >
> > "ADSM: Dist Stor Manager"  wrote on 2012-11-19
> > 11:30:47:
> >
> > > From: Stefan Folkerts 
> > > To: ADSM-L@vm.marist.edu,
> > > Date: 2012-11-19 11:34
> > > Subject: Re: 6.4 docs
> > > Sent by: "ADSM: Dist Stor Manager" 
> > >
> > > Simon is the man of the day for me! :-D
> > >
> > >
> > > On Mon, Nov 19, 2012 at 9:37 AM, Erwann Simon 
> > > 
> > wrote:
> > >
> > > > Hi all,
> > > >
> > > > It's not working for me either.
> > > >
> > > > Here's a dropbox link to the new publications (.pdf):
> > > > http://db.tt/LWQajxwi
> > > >
> > > > You'll also find a quick review of the new functions.
> > > >
> > > > Regards,
> > > > Erwann
> > > >
> > > >
> > > > Remco Post  a écrit :
> > > >
> > > > >Hi all,
> > > > >
> > > > >anyone getting something useful from
> > > > >http://pic.dhe.ibm.com/infocenter/tsminfo/v6r4 ?
> > > >
> > > > --
> > > > Envoyé de mon téléphone Android avec K-9 Mail. Excusez la brièveté.
> > > >
> > >=
> >
>

Re: netezza nzbackup connector for TSM

[Tailor, Mahesh C.]

What I have been told by the IBM partner is that in addition to the TSM 
connector that is built into the product, we would need to purchase licenses 
for the other products -- BA client and TSM for DB.  Yes, of the two TSM for DB 
is the majority of the cost.  I also questioned the need for the TSM for DB 
client as there is no "standard" -- Oracle, DB2, etc. -- database on the 
Netezza and have not received a definitive answer.

Thanks.
Mahesh


From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Tim Brown 
[tbr...@cenhud.com]
Sent: Tuesday, November 27, 2012 08:44
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] netezza nzbackup connector for TSM

Is the TSM for DB Client you refer to "the Connector". So far I prefer just 
native TSM with nzbackups.
With the 6 figure price tag, is the TSM for DB Client that you refer to the 
greatest $ amt of the 2.


Thanks,

Tim

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
Tailor, Mahesh C.
Sent: Monday, 26 November, 2012 5:14 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: netezza nzbackup connector for TSM

Hello.

On a similar thread: we are in the process of acquiring Netezza and will need 
to back it up to TSM.  We were told of the TSM Connector.  In trying to make 
sure we are in TSM license compliance, we were told that we would need to 
license both the TSM for BA client and the TSM for DB client.  If we were to 
license both TSM products, we are looking at cost in the six-figures. Can 
someone please advise as to how the TSM licensing works for this product?

Thanks in advance.
Mahesh


From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Tim Brown 
[tbr...@cenhud.com]
Sent: Monday, October 29, 2012 11:34
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] netezza nzbackup connector for TSM

I am attempting to get the netezza backup utility working with tsm. They have a 
connector that allows backing up netezza backups directly into tsm.

Has anyone tried this and got it to work.

./nzbackup -u user -pw psw -db TDS -connector tivioli  -connectorArgs 
"TSM_PASSWORD=x"


Error: unable to connect to host 'localhost', port '5483' - Connection refused.


Thanks,

Tim Brown
Supervisor Computer Operations
Central Hudson Gas & Electric
284 South Ave
Poughkeepsie, NY 12601
Email: tbr...@cenhud.com <>
Phone: 845-486-5643
Fax: 845-486-5921
Cell: 845-235-4255


"This message contains confidential information and is only for the intended 
recipient. If the reader of this message is not the intended recipient, or an 
employee or agent responsible for delivering this message to the intended 
recipient, please notify the sender immediately by replying to this note and 
deleting all copies and attachments."



Notice: The information and attachment(s) contained in this communication are 
intended for the addressee only, and may be confidential and/or legally 
privileged. If you have received this communication in error, please contact 
the sender immediately, and delete this communication from any computer or 
network system. Any interception, review, printing, copying, re-transmission, 
dissemination, or other use of, or taking of any action upon this information 
by persons or entities other than the intended recipient is strictly prohibited 
by law and may subject them to criminal or civil liability. Carilion Clinic 
shall not be liable for the improper and/or incomplete transmission of the 
information contained in this communication or for any delay in its receipt.



Notice: The information and attachment(s) contained in this communication are 
intended for the addressee only, and may be confidential and/or legally 
privileged. If you have received this communication in error, please contact 
the sender immediately, and delete this communication from any computer or 
network system. Any interception, review, printing, copying, re-transmission, 
dissemination, or other use of, or taking of any action upon this information 
by persons or entities other than the intended recipient is strictly prohibited 
by law and may subject them to criminal or civil liability. Carilion Clinic 
shall not be liable for the improper and/or incomplete transmission of the 
information contained in this communication or for any delay in its receipt.

Re: Strange dirmc

[Andrew Raibeck]

Robert,

Do you have more than one SERVERNAME stanza in dsm.sys? Are you sure that
the DIRMC option is in the correct stanza? Is it possible that DIRMC is
being overridden by a client option set?

Try this test, to see what DIRMC value is in effect. From the command line,
issue this command:

   dsmc query option dirmc

What does it show?

You might need to specify the correct SERVERNAME stanza:

   dsmc query option dirmc -servername=stanza_name

where stanza_name is the SERVERNAME stanza in your dsm.sys file.

Best regards,

Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Product Development
Level 3 Team Lead
Internal Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS
Internet e-mail: stor...@us.ibm.com

IBM Tivoli Storage Manager support web page:
http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Storage_Manager

"ADSM: Dist Stor Manager"  wrote on 2012-11-27
08:27:35:

> From: Robert Ouzen 
> To: ADSM-L@vm.marist.edu,
> Date: 2012-11-27 08:38
> Subject: Strange dirmc
> Sent by: "ADSM: Dist Stor Manager" 
>
> Hi to all
> I have a nodename who backup the directory to another management
> class  in my case mgeducation
>
> I have on my inclexcl file this statement:  include /export/home/*
mglaw
>
> I tried in the dsm.sys to put dirmc mglaw but still the directory is
> written to mgeducation (the data is written to mglaw correctly)
>
> I of course after any change I stop  the dsmcad and reload it but the
same !
>
> I double check the management and the backup copygroup they point to
> the correct storage DD_LAW (Activate too)
>
> All my another clients works fine !
>
> My Tsm Server version 6.3.2.0 and client version 6.1.0
>
> Regards Robert
>

Re: Strange dirmc

[Andrew Raibeck]

Robert,

Have you checked the dsmerror.log in case there is some message there that
hints why the wrong management class is used for directories?

Can you reproduce this with the command line client? Create a new
directory, such as /home/robert/newdir. Add a file or two. Then back it up,
e.g.:

   dsmc i /home/robert/newdir/ -subdir=yes

Then query the directory backup:

   dsmc q ba /home/robert/newdir -dirsonly

Does it show the wrong management class? Check dsmerror.log. Are there any
messages there?

Also run:

   dsmc q mg -detail

And examine the MGLAW management class. What does it show?

Best regards,

Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Product Development
Level 3 Team Lead
Internal Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS
Internet e-mail: stor...@us.ibm.com

IBM Tivoli Storage Manager support web page:
http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Storage_Manager

"ADSM: Dist Stor Manager"  wrote on 2012-11-27
10:28:08:

> From: Robert Ouzen 
> To: ADSM-L@vm.marist.edu,
> Date: 2012-11-27 10:54
> Subject: Re: Strange dirmc
> Sent by: "ADSM: Dist Stor Manager" 
>
> Hi Andy
>
> Thank you for your fast reply ...
> As you see the dirmc is point to the correct management mglaw
>
> q option dirmc
> DIRMC: MGLAW
>
> I have only one stanza in this client
>
> SErvernamelawsrv
>COMMmethod TCPip
>TCPPort1500
>TCPServeraddress   XXX.XXX.XXX.XXX
>TCPCLIENTADDRESS YYY..YYY.YYY
>Passwordaccess Generate
>Nodename   lawsrv
> Dirmc mglaw
> INCLEXCL "/opt/tivoli/tsm/client/ba/bin/backup.excl"
>Schedmode  prompted
>Schedlogname   "/tmp/dsmsched.log"
>Errorlogname   "/tmp/dsmerror.log"
>schedlogr  7 D
>errorlogr  7 D
>Resourceutilization 8
>managedserviceswebclient  schedule
>
> About the optiontset
>
> tsm: POSTBACK>q cloptset optionset
>
> OPTIONSET   ROBERT
>
> QUIET   0 Yes yes
> RESOURCEUTILIZATION 0Yes 4
> SCHEDMODE  0 No prompted
> SUBDIR0 Yes yes
>
> Regards,
> Robert
>
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On
> Behalf Of Andrew Raibeck
> Sent: Tuesday, November 27, 2012 4:19 PM
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: [ADSM-L] Strange dirmc
>
> Robert,
>
> Do you have more than one SERVERNAME stanza in dsm.sys? Are you sure
> that the DIRMC option is in the correct stanza? Is it possible that
> DIRMC is being overridden by a client option set?
>
> Try this test, to see what DIRMC value is in effect. From the
> command line, issue this command:
>
>dsmc query option dirmc
>
> What does it show?
>
> You might need to specify the correct SERVERNAME stanza:
>
>dsmc query option dirmc -servername=stanza_name
>
> where stanza_name is the SERVERNAME stanza in your dsm.sys file.
>
> Best regards,
>
> Andy Raibeck
> IBM Software Group
> Tivoli Storage Manager Client Product Development Level 3 Team Lead
> Internal Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS Internet e-
> mail: stor...@us.ibm.com
>
> IBM Tivoli Storage Manager support web page:
> http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/
> Tivoli_Storage_Manager
>
> "ADSM: Dist Stor Manager"  wrote on 2012-11-27
> 08:27:35:
>
> > From: Robert Ouzen 
> > To: ADSM-L@vm.marist.edu,
> > Date: 2012-11-27 08:38
> > Subject: Strange dirmc
> > Sent by: "ADSM: Dist Stor Manager" 
> >
> > Hi to all
> > I have a nodename who backup the directory to another management class

> > in my case mgeducation
> >
> > I have on my inclexcl file this statement:  include /export/home/*
> mglaw
> >
> > I tried in the dsm.sys to put dirmc mglaw but still the directory is
> > written to mgeducation (the data is written to mglaw correctly)
> >
> > I of course after any change I stop  the dsmcad and reload it but the
> same !
> >
> > I double check the management and the backup copygroup they point to
> > the correct storage DD_LAW (Activate too)
> >
> > All my another clients works fine !
> >
> > My Tsm Server version 6.3.2.0 and client version 6.1.0
> >
> > Regards Robert
> >
>

Re: AW: [ADSM-L] 6.4 docs

[Remco Post]

24 hours, not 24 minutes... be more patient :)


On 27 nov. 2012, at 16:34, "Dolinski, Peter S"  
wrote:

> I don't see any TSM6.4 folder there.
> 
> Regards,
> 
> Peter 
> (206) 616-0787
> 
> 
> 
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
> Angela Robertson
> Sent: Tuesday, November 27, 2012 6:56 AM
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
> 
> The TSM 6.4 information center has been packaged and sent for posting to the 
> following site:
> ftp://ftp.software.ibm.com/storage/tivoli-storage-management/techprev/infocenter/
> 
> 
> I was told that it should be available in the next 24 hours. I'll check the 
> site throughout the day to ensure the package is posted. Angela
> 
> 
> Angela Robertson
> IBM Software Group, Tivoli Software
> Durham, NC 27703
> aprob...@us.ibm.com
> 
> “We are what we repeatedly do. Excellence, then, is not an act, but a habit.” 
> - Aristotle
> 
> "ADSM: Dist Stor Manager"  wrote on 11/21/2012
> 04:18:10 PM:
> 
>> "J. Pohlmann" 
>> Sent by: "ADSM: Dist Stor Manager" 
>> 
>> 11/21/2012 04:18 PM
>> 
>> Please respond to
>> "ADSM: Dist Stor Manager" 
>> 
>> To
>> 
>> ADSM-L@vm.marist.edu,
>> 
>> cc
>> 
>> Subject
>> 
>> Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
>> 
>> A request to development - could someone please package the TSM 6.4 
>> Infocenter into a downloadable package and put in the techprev 
>> directory on the ftp site along with the other downoadable Infocenters.
>> 
>> Thanks.
>> 
>> Regards,
>> 
>> Joerg Pohlmann
>> 
>> -Original Message-
>> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf 
>> Of Angela Robertson
>> Sent: Tuesday, November 20, 2012 06:40
>> To: ADSM-L@VM.MARIST.EDU
>> Subject: Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
>> 
>> The 6.4 Info Center is available:
>> http://pic.dhe.ibm.com/infocenter/tsminfo/v6r4/index.jsp
>> 
>> The ibm.com team has been contacted and the problem should not happen 
>> again. That said, if the problem persists, thanks for your patience. 
>> No one wants the site down... Angela
>> 
>> 
>> Angela Robertson
>> IBM Software Group, Tivoli Software
>> Durham, NC 27703
>> aprob...@us.ibm.com
>> 
>> “We are what we repeatedly do. Excellence, then, is not an act, but a 
>> habit.” - Aristotle
>> 
>> "ADSM: Dist Stor Manager"  wrote on 11/20/2012
>> 03:33:15 AM:
>> 
>>> Rainer Holzinger  Sent by: "ADSM: Dist Stor 
>>> Manager" 
>>> 
>>> 11/20/2012 03:33 AM
>>> 
>>> Please respond to
>>> "ADSM: Dist Stor Manager" 
>>> 
>>> To
>>> 
>>> ADSM-L@vm.marist.edu,
>>> 
>>> cc
>>> 
>>> Subject
>>> 
>>> [ADSM-L] AW: [ADSM-L] 6.4 docs
>>> 
>>> Hi Andy,
>>> 
>>> for me the 6.4 Info Center is still not working.
>>> Following the link still results in "service temporarily unavailable".
>>> 
>>> Best regards,
>>> Rainer
>>> 
>>> -Ursprüngliche Nachricht-
>>> Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im 
>>> Auftrag von Andrew Raibeck
>>> Gesendet: Montag, 19. November 2012 20:37
>>> An: ADSM-L@VM.MARIST.EDU
>>> Betreff: Re: [ADSM-L] 6.4 docs
>>> 
>>> 6.4 Info Center is back up.
>>> 
>>> Best regards,
>>> 
>>> Andy Raibeck
>>> IBM Software Group
>>> Tivoli Storage Manager Client Product Development Level 3 Team Lead 
>>> Internal Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS Internet
>>> e-mail: stor...@us.ibm.com
>>> 
>>> IBM Tivoli Storage Manager support web page:
>>> 
>> 
> http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Stor
> 
>> 
>>> age_Manager
>>> 
>>> "ADSM: Dist Stor Manager"  wrote on 2012-11-19
>>> 11:30:47:
>>> 
 From: Stefan Folkerts 
 To: ADSM-L@vm.marist.edu,
 Date: 2012-11-19 11:34
 Subject: Re: 6.4 docs
 Sent by: "ADSM: Dist Stor Manager" 
 
 Simon is the man of the day for me! :-D
 
 
 On Mon, Nov 19, 2012 at 9:37 AM, Erwann Simon 
 
>>> wrote:
 
> Hi all,
> 
> It's not working for me either.
> 
> Here's a dropbox link to the new publications (.pdf):
> http://db.tt/LWQajxwi
> 
> You'll also find a quick review of the new functions.
> 
> Regards,
> Erwann
> 
> 
> Remco Post  a écrit :
> 
>> Hi all,
>> 
>> anyone getting something useful from
>> http://pic.dhe.ibm.com/infocenter/tsminfo/v6r4 ?
> 
> --
> Envoyé de mon téléphone Android avec K-9 Mail. Excusez la brièveté.
> 
 =
>>> 
>> 

-- 
Met vriendelijke groeten/Kind Regards,

Remco Post
r.p...@plcs.nl
+31 6 248 21 622

Re: netezza nzbackup connector for TSM

[Remco Post]

One thing about IBM partners: they're just as likely to understand licensing as 
anyone IBM PVU licenses are hellish. As long as there is no real TDPO for 
... or BA client running on the box, you don't have to buy licenses.

On 27 nov. 2012, at 16:07, "Tailor, Mahesh C."  
wrote:

> What I have been told by the IBM partner is that in addition to the TSM 
> connector that is built into the product, we would need to purchase licenses 
> for the other products -- BA client and TSM for DB.  Yes, of the two TSM for 
> DB is the majority of the cost.  I also questioned the need for the TSM for 
> DB client as there is no "standard" -- Oracle, DB2, etc. -- database on the 
> Netezza and have not received a definitive answer.
> 
> Thanks.
> Mahesh
> 
> 
> From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Tim Brown 
> [tbr...@cenhud.com]
> Sent: Tuesday, November 27, 2012 08:44
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: [ADSM-L] netezza nzbackup connector for TSM
> 
> Is the TSM for DB Client you refer to "the Connector". So far I prefer just 
> native TSM with nzbackups.
> With the 6 figure price tag, is the TSM for DB Client that you refer to the 
> greatest $ amt of the 2.
> 
> 
> Thanks,
> 
> Tim
> 
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
> Tailor, Mahesh C.
> Sent: Monday, 26 November, 2012 5:14 PM
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: netezza nzbackup connector for TSM
> 
> Hello.
> 
> On a similar thread: we are in the process of acquiring Netezza and will need 
> to back it up to TSM.  We were told of the TSM Connector.  In trying to make 
> sure we are in TSM license compliance, we were told that we would need to 
> license both the TSM for BA client and the TSM for DB client.  If we were to 
> license both TSM products, we are looking at cost in the six-figures. Can 
> someone please advise as to how the TSM licensing works for this product?
> 
> Thanks in advance.
> Mahesh
> 
> 
> From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Tim Brown 
> [tbr...@cenhud.com]
> Sent: Monday, October 29, 2012 11:34
> To: ADSM-L@VM.MARIST.EDU
> Subject: [ADSM-L] netezza nzbackup connector for TSM
> 
> I am attempting to get the netezza backup utility working with tsm. They have 
> a connector that allows backing up netezza backups directly into tsm.
> 
> Has anyone tried this and got it to work.
> 
> ./nzbackup -u user -pw psw -db TDS -connector tivioli  -connectorArgs 
> "TSM_PASSWORD=x"
> 
> 
> Error: unable to connect to host 'localhost', port '5483' - Connection 
> refused.
> 
> 
> Thanks,
> 
> Tim Brown
> Supervisor Computer Operations
> Central Hudson Gas & Electric
> 284 South Ave
> Poughkeepsie, NY 12601
> Email: tbr...@cenhud.com 
> <>
> Phone: 845-486-5643
> Fax: 845-486-5921
> Cell: 845-235-4255
> 
> 
> "This message contains confidential information and is only for the intended 
> recipient. If the reader of this message is not the intended recipient, or an 
> employee or agent responsible for delivering this message to the intended 
> recipient, please notify the sender immediately by replying to this note and 
> deleting all copies and attachments."
> 
> 
> 
> Notice: The information and attachment(s) contained in this communication are 
> intended for the addressee only, and may be confidential and/or legally 
> privileged. If you have received this communication in error, please contact 
> the sender immediately, and delete this communication from any computer or 
> network system. Any interception, review, printing, copying, re-transmission, 
> dissemination, or other use of, or taking of any action upon this information 
> by persons or entities other than the intended recipient is strictly 
> prohibited by law and may subject them to criminal or civil liability. 
> Carilion Clinic shall not be liable for the improper and/or incomplete 
> transmission of the information contained in this communication or for any 
> delay in its receipt.
> 
> 
> 
> Notice: The information and attachment(s) contained in this communication are 
> intended for the addressee only, and may be confidential and/or legally 
> privileged. If you have received this communication in error, please contact 
> the sender immediately, and delete this communication from any computer or 
> network system. Any interception, review, printing, copying, re-transmission, 
> dissemination, or other use of, or taking of any action upon this information 
> by persons or entities other than the intended recipient is strictly 
> prohibited by law and may subject them to criminal or civil liability. 
> Carilion Clinic shall not be liable for the improper and/or incomplete 
> transmission of the information contained in this communication or for any

TSM cmd after library has been defined again..

[Swartz, Jerome]

Hi All,

Haven't touched TSM in a while. Needed to delete the paths, drives and library. 

I just defined those again and there is a command that I need to run so that 
TSM can see the tapes in the library.

Just can't get to it! Q libv doesn't return any results..

Thanks in  advance!

Jerome



**
COMPUTACENTER PLC is registered in England and Wales with the registered number 
03110569.  Its registered office is at Hatfield Business Park, Hatfield Avenue, 
Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (UK) Limited is registered in England and Wales with the 
registered number 01584718.  Its registered office is at Hatfield Business 
Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (Mid-Market) Limited is registered in England and Wales with the 
registered number 3434654. Its registered office is at Hatfield Business Park, 
Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (FMS) Limited is registered in England and Wales with the 
registered number 3798091. Its registered office is at Hatfield Business Park, 
Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW

The contents of this email are intended for the named addressee only.
It contains information which may be confidential and which may also be 
privileged.
Unless you are the named addressee (or authorised to receive mail for the 
addressee) you may not copy or use it, or disclose it to anyone else.
If you receive it in error please notify us immediately and then destroy it.
Computacenter information is available from: http://www.computacenter.com
**

Re: TSM cmd after library has been defined again..

[Swartz, Jerome]

W2K3 server, TSM 5.5 

Library is a IBM 3584

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Zoltan 
Forray
Sent: 27 November 2012 08:54 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

More info.  What kind/make/model of library?  What OS/platform? We have a
3494 accessed via Linux servers so what I do isn't the same as what you might 
do


On Tue, Nov 27, 2012 at 1:37 PM, Swartz, Jerome < 
jerome.swa...@computacenter.com> wrote:

> Hi All,
>
> Haven't touched TSM in a while. Needed to delete the paths, drives and 
> library.
>
> I just defined those again and there is a command that I need to run 
> so that TSM can see the tapes in the library.
>
> Just can't get to it! Q libv doesn't return any results..
>
> Thanks in  advance!
>
> Jerome
>
>
>
> **
> COMPUTACENTER PLC is registered in England and Wales with the 
> registered number 03110569.  Its registered office is at Hatfield 
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW 
> COMPUTACENTER (UK) Limited is registered in England and Wales with the 
> registered number 01584718.  Its registered office is at Hatfield 
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW 
> COMPUTACENTER (Mid-Market) Limited is registered in England and Wales 
> with the registered number 3434654. Its registered office is at 
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 
> 9TW COMPUTACENTER (FMS) Limited is registered in England and Wales 
> with the registered number 3798091. Its registered office is at 
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 
> 9TW
>
> The contents of this email are intended for the named addressee only.
> It contains information which may be confidential and which may also 
> be privileged.
> Unless you are the named addressee (or authorised to receive mail for 
> the
> addressee) you may not copy or use it, or disclose it to anyone else.
> If you receive it in error please notify us immediately and then 
> destroy it.
> Computacenter information is available from: 
> http://www.computacenter.com
> **
>



--
*Zoltan Forray*
TSM Software & Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu - 804-828-4807
Don't be a phishing victim - VCU and other reputable organizations will never 
use email to request that you reply with your password, social security number 
or confidential personal information. For more details visit 
http://infosecurity.vcu.edu/phishing.html

Re: TSM cmd after library has been defined again..

[Remco Post]

checkin libv  search=y stat=scr checkl=[bar|yes]
checkin libv  search=y stat=priv checkl=[bar|yes]

in that order


On 27 nov. 2012, at 19:37, "Swartz, Jerome"  
wrote:

> Hi All,
> 
> Haven't touched TSM in a while. Needed to delete the paths, drives and 
> library. 
> 
> I just defined those again and there is a command that I need to run so that 
> TSM can see the tapes in the library.
> 
> Just can't get to it! Q libv doesn't return any results..
> 
> Thanks in  advance!
> 
> Jerome
> 
> 
> 
> **
> COMPUTACENTER PLC is registered in England and Wales with the registered 
> number 03110569.  Its registered office is at Hatfield Business Park, 
> Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
> COMPUTACENTER (UK) Limited is registered in England and Wales with the 
> registered number 01584718.  Its registered office is at Hatfield Business 
> Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
> COMPUTACENTER (Mid-Market) Limited is registered in England and Wales with 
> the registered number 3434654. Its registered office is at Hatfield Business 
> Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
> COMPUTACENTER (FMS) Limited is registered in England and Wales with the 
> registered number 3798091. Its registered office is at Hatfield Business 
> Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
> 
> The contents of this email are intended for the named addressee only.
> It contains information which may be confidential and which may also be 
> privileged.
> Unless you are the named addressee (or authorised to receive mail for the 
> addressee) you may not copy or use it, or disclose it to anyone else.
> If you receive it in error please notify us immediately and then destroy it.
> Computacenter information is available from: http://www.computacenter.com
> **

-- 
Met vriendelijke groeten/Kind Regards,

Remco Post
r.p...@plcs.nl
+31 6 248 21 622

Re: TSM cmd after library has been defined again..

[Vandeventer, Harold [BS]]

Are you needing to run a CHECKIN libvname  to get the inventory 
of tapes into the TSM system?


Harold Vandeventer
Systems Programmer
State of Kansas - Office of Information Technology Services
harold.vandeven...@ks.gov
(785) 296-0631

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
Swartz, Jerome
Sent: Tuesday, November 27, 2012 1:01 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

W2K3 server, TSM 5.5 

Library is a IBM 3584

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Zoltan 
Forray
Sent: 27 November 2012 08:54 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

More info.  What kind/make/model of library?  What OS/platform? We have a
3494 accessed via Linux servers so what I do isn't the same as what you might 
do


On Tue, Nov 27, 2012 at 1:37 PM, Swartz, Jerome < 
jerome.swa...@computacenter.com> wrote:

> Hi All,
>
> Haven't touched TSM in a while. Needed to delete the paths, drives and 
> library.
>
> I just defined those again and there is a command that I need to run 
> so that TSM can see the tapes in the library.
>
> Just can't get to it! Q libv doesn't return any results..
>
> Thanks in  advance!
>
> Jerome
>
>
>
> **
> COMPUTACENTER PLC is registered in England and Wales with the 
> registered number 03110569.  Its registered office is at Hatfield 
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW 
> COMPUTACENTER (UK) Limited is registered in England and Wales with the 
> registered number 01584718.  Its registered office is at Hatfield 
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW 
> COMPUTACENTER (Mid-Market) Limited is registered in England and Wales 
> with the registered number 3434654. Its registered office is at 
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 
> 9TW COMPUTACENTER (FMS) Limited is registered in England and Wales 
> with the registered number 3798091. Its registered office is at 
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 
> 9TW
>
> The contents of this email are intended for the named addressee only.
> It contains information which may be confidential and which may also 
> be privileged.
> Unless you are the named addressee (or authorised to receive mail for 
> the
> addressee) you may not copy or use it, or disclose it to anyone else.
> If you receive it in error please notify us immediately and then 
> destroy it.
> Computacenter information is available from: 
> http://www.computacenter.com
> **
>



--
*Zoltan Forray*
TSM Software & Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu - 804-828-4807
Don't be a phishing victim - VCU and other reputable organizations will never 
use email to request that you reply with your password, social security number 
or confidential personal information. For more details visit 
http://infosecurity.vcu.edu/phishing.html

[Confidentiality notice:]
***
This e-mail message, including attachments, if any, is intended for the
person or entity to which it is addressed and may contain confidential
or privileged information.  Any unauthorized review, use, or disclosure
is prohibited.  If you are not the intended recipient, please contact
the sender and destroy the original message, including all copies,
Thank you.
***

Re: TSM cmd after library has been defined again..

[Ribeiro, Ricardo]

Here is an easier one...

Syntax for a SCSI library

>>-LABEl LIBVolume--library_name>
more...   ( to continue, 'C' to cancel)


>+-volume_name+
 '-SEARCH--=--+-Yes--| A |--+--LABELSource--=--+-Barcode+-'
  '-Bulk--| A |-'  +-Prompt-+
   '-Vollist--| B |-'

.-OVERWRITE--=--No--.
>--+-+--+---+--->
   '-CHECKIN--=--+-SCRatch-+-'  '-OVERWRITE--=--+-No--+-'
 '-PRIvate-''-Yes-'




-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@vm.marist.edu] On Behalf Of Remco 
Post
Sent: Tuesday, November 27, 2012 11:55 AM
To: ADSM-L@vm.marist.edu
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

checkin libv  search=y stat=scr checkl=[bar|yes] checkin libv  
search=y stat=priv checkl=[bar|yes]

in that order


On 27 nov. 2012, at 19:37, "Swartz, Jerome"  
wrote:

> Hi All,
> 
> Haven't touched TSM in a while. Needed to delete the paths, drives and 
> library. 
> 
> I just defined those again and there is a command that I need to run so that 
> TSM can see the tapes in the library.
> 
> Just can't get to it! Q libv doesn't return any results..
> 
> Thanks in  advance!
> 
> Jerome
> 
> 
> 
> **
> COMPUTACENTER PLC is registered in England and Wales with the 
> registered number 03110569.  Its registered office is at Hatfield 
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW 
> COMPUTACENTER (UK) Limited is registered in England and Wales with the 
> registered number 01584718.  Its registered office is at Hatfield 
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW 
> COMPUTACENTER (Mid-Market) Limited is registered in England and Wales 
> with the registered number 3434654. Its registered office is at 
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 
> 9TW COMPUTACENTER (FMS) Limited is registered in England and Wales 
> with the registered number 3798091. Its registered office is at 
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 
> 9TW
> 
> The contents of this email are intended for the named addressee only.
> It contains information which may be confidential and which may also be 
> privileged.
> Unless you are the named addressee (or authorised to receive mail for the 
> addressee) you may not copy or use it, or disclose it to anyone else.
> If you receive it in error please notify us immediately and then destroy it.
> Computacenter information is available from: 
> http://www.computacenter.com
> **

--
Met vriendelijke groeten/Kind Regards,

Remco Post
r.p...@plcs.nl
+31 6 248 21 622

Re: TSM cmd after library has been defined again..

[Swartz, Jerome]

Too late.. They all private now..

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Skylar 
Thompson
Sent: 27 November 2012 08:59 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

First check in your scratch tapes:

checkin libv  search=y checkl=b status=scr

Then your private tapes (storage pool, DB backup, export, etc.):

checkin libv  search=y checkl=b status=priv

Make sure to do it in this order, or all your scratch tapes will become private.

-- Skylar Thompson (skyl...@u.washington.edu)
-- Genome Sciences Department, System Administrator
-- Foege Building S046, (206)-685-7354
-- University of Washington School of Medicine

On 11/27/12 10:37 AM, Swartz, Jerome wrote:
> Hi All,
>
> Haven't touched TSM in a while. Needed to delete the paths, drives and 
> library.
>
> I just defined those again and there is a command that I need to run so that 
> TSM can see the tapes in the library.
>
> Just can't get to it! Q libv doesn't return any results..
>
> Thanks in  advance!
>
> Jerome
>
>
>
> **
> COMPUTACENTER PLC is registered in England and Wales with the 
> registered number 03110569.  Its registered office is at Hatfield 
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW 
> COMPUTACENTER (UK) Limited is registered in England and Wales with the 
> registered number 01584718.  Its registered office is at Hatfield 
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW 
> COMPUTACENTER (Mid-Market) Limited is registered in England and Wales 
> with the registered number 3434654. Its registered office is at 
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 
> 9TW COMPUTACENTER (FMS) Limited is registered in England and Wales 
> with the registered number 3798091. Its registered office is at 
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 
> 9TW
>
> The contents of this email are intended for the named addressee only.
> It contains information which may be confidential and which may also be 
> privileged.
> Unless you are the named addressee (or authorised to receive mail for the 
> addressee) you may not copy or use it, or disclose it to anyone else.
> If you receive it in error please notify us immediately and then destroy it.
> Computacenter information is available from: 
> http://www.computacenter.com
> **
>

Re: AW: [ADSM-L] 6.4 docs

[Angela Robertson]

Hi -

I checked and when the files were posted, the URL changed... My apologies
for any confusion. To confirm, the TSM 6.4 (including FCM 3.2) and the
updated TSM 6.3 content has been posted:

ftp://public.dhe.ibm.com/storage/tivoli-storage-management/techprev/infocenter/


Angela Robertson
IBM Software Group, Tivoli Software
Durham, NC 27703
aprob...@us.ibm.com

“We are what we repeatedly do. Excellence, then, is not an act, but a
habit.” - Aristotle

"ADSM: Dist Stor Manager"  wrote on 11/27/2012
10:34:34 AM:

> "Dolinski, Peter S" 
> Sent by: "ADSM: Dist Stor Manager" 
>
> 11/27/2012 10:34 AM
>
> Please respond to
> "ADSM: Dist Stor Manager" 
>
> To
>
> ADSM-L@vm.marist.edu,
>
> cc
>
> Subject
>
> Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
>
> I don't see any TSM6.4 folder there.
>
> Regards,
>
> Peter
> (206) 616-0787
>
>
>
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On
> Behalf Of Angela Robertson
> Sent: Tuesday, November 27, 2012 6:56 AM
> To: ADSM-L@VM.MARIST.EDU
> Subject: Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
>
> The TSM 6.4 information center has been packaged and sent for
> posting to the following site:
> ftp://ftp.software.ibm.com/storage/tivoli-storage-management/
> techprev/infocenter/
>
>
> I was told that it should be available in the next 24 hours. I'll
> check the site throughout the day to ensure the package is posted. Angela
>
> 
> Angela Robertson
> IBM Software Group, Tivoli Software
> Durham, NC 27703
> aprob...@us.ibm.com
> 
> “We are what we repeatedly do. Excellence, then, is not an act, but
> a habit.” - Aristotle
>
> "ADSM: Dist Stor Manager"  wrote on 11/21/2012
> 04:18:10 PM:
>
> > "J. Pohlmann" 
> > Sent by: "ADSM: Dist Stor Manager" 
> >
> > 11/21/2012 04:18 PM
> >
> > Please respond to
> > "ADSM: Dist Stor Manager" 
> >
> > To
> >
> > ADSM-L@vm.marist.edu,
> >
> > cc
> >
> > Subject
> >
> > Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
> >
> > A request to development - could someone please package the TSM 6.4
> > Infocenter into a downloadable package and put in the techprev
> > directory on the ftp site along with the other downoadable Infocenters.
> >
> > Thanks.
> >
> > Regards,
> >
> > Joerg Pohlmann
> >
> > -Original Message-
> > From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
> > Of Angela Robertson
> > Sent: Tuesday, November 20, 2012 06:40
> > To: ADSM-L@VM.MARIST.EDU
> > Subject: Re: [ADSM-L] AW: [ADSM-L] 6.4 docs
> >
> > The 6.4 Info Center is available:
> > http://pic.dhe.ibm.com/infocenter/tsminfo/v6r4/index.jsp
> >
> > The ibm.com team has been contacted and the problem should not happen
> > again. That said, if the problem persists, thanks for your patience.
> > No one wants the site down... Angela
> >
> > 
> > Angela Robertson
> > IBM Software Group, Tivoli Software
> > Durham, NC 27703
> > aprob...@us.ibm.com
> > 
> > “We are what we repeatedly do. Excellence, then, is not an act, but a
> > habit.” - Aristotle
> >
> > "ADSM: Dist Stor Manager"  wrote on 11/20/2012
> > 03:33:15 AM:
> >
> > > Rainer Holzinger  Sent by: "ADSM: Dist Stor
> > > Manager" 
> > >
> > > 11/20/2012 03:33 AM
> > >
> > > Please respond to
> > > "ADSM: Dist Stor Manager" 
> > >
> > > To
> > >
> > > ADSM-L@vm.marist.edu,
> > >
> > > cc
> > >
> > > Subject
> > >
> > > [ADSM-L] AW: [ADSM-L] 6.4 docs
> > >
> > > Hi Andy,
> > >
> > > for me the 6.4 Info Center is still not working.
> > > Following the link still results in "service temporarily
unavailable".
> > >
> > > Best regards,
> > > Rainer
> > >
> > > -Ursprüngliche Nachricht-
> > > Von: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Im
> > > Auftrag von Andrew Raibeck
> > > Gesendet: Montag, 19. November 2012 20:37
> > > An: ADSM-L@VM.MARIST.EDU
> > > Betreff: Re: [ADSM-L] 6.4 docs
> > >
> > > 6.4 Info Center is back up.
> > >
> > > Best regards,
> > >
> > > Andy Raibeck
> > > IBM Software Group
> > > Tivoli Storage Manager Client Product Development Level 3 Team Lead
> > > Internal Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS Internet
> > > e-mail: stor...@us.ibm.com
> > >
> > > IBM Tivoli Storage Manager support web page:
> > >
> >
>
http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Stor

>
> >
> > > age_Manager
> > >
> > > "ADSM: Dist Stor Manager"  wrote on 2012-11-19
> > > 11:30:47:
> > >
> > > > From: Stefan Folkerts 
> > > > To: ADSM-L@vm.marist.edu,
> > > > Date: 2012-11-19 11:34
> > > > Subject: Re: 6.4 docs
> > > > Sent by: "ADSM: Dist Stor Manager" 
> > > >
> > > > Simon is the man of the day for me! :-D
> > > >
> > > >
> > > > On Mon, Nov 19, 2012 at 

Re: TSM cmd after library has been defined again..

[Dmitry]

checkout all and checkin againg
On 28.11.2012 0:05, Swartz, Jerome wrote:

Too late.. They all private now..

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Skylar 
Thompson
Sent: 27 November 2012 08:59 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

First check in your scratch tapes:

checkin libv  search=y checkl=b status=scr

Then your private tapes (storage pool, DB backup, export, etc.):

checkin libv  search=y checkl=b status=priv

Make sure to do it in this order, or all your scratch tapes will become private.

-- Skylar Thompson (skyl...@u.washington.edu)
-- Genome Sciences Department, System Administrator
-- Foege Building S046, (206)-685-7354
-- University of Washington School of Medicine

On 11/27/12 10:37 AM, Swartz, Jerome wrote:

Hi All,

Haven't touched TSM in a while. Needed to delete the paths, drives and library.

I just defined those again and there is a command that I need to run so that 
TSM can see the tapes in the library.

Just can't get to it! Q libv doesn't return any results..

Thanks in  advance!

Jerome



**
COMPUTACENTER PLC is registered in England and Wales with the
registered number 03110569.  Its registered office is at Hatfield
Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (UK) Limited is registered in England and Wales with the
registered number 01584718.  Its registered office is at Hatfield
Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (Mid-Market) Limited is registered in England and Wales
with the registered number 3434654. Its registered office is at
Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10
9TW COMPUTACENTER (FMS) Limited is registered in England and Wales
with the registered number 3798091. Its registered office is at
Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10
9TW

The contents of this email are intended for the named addressee only.
It contains information which may be confidential and which may also be 
privileged.
Unless you are the named addressee (or authorised to receive mail for the 
addressee) you may not copy or use it, or disclose it to anyone else.
If you receive it in error please notify us immediately and then destroy it.
Computacenter information is available from:
http://www.computacenter.com
**

Re: TSM cmd after library has been defined again..

[Steve Roder]

You need to run "checkin libvol" twice, first for scratch tapes, and
then for privates.

On 11/27/2012 01:54 PM, Zoltan Forray wrote:

More info.  What kind/make/model of library?  What OS/platform? We have a
3494 accessed via Linux servers so what I do isn't the same as what you
might do


On Tue, Nov 27, 2012 at 1:37 PM, Swartz, Jerome <
jerome.swa...@computacenter.com> wrote:


Hi All,

Haven't touched TSM in a while. Needed to delete the paths, drives and
library.

I just defined those again and there is a command that I need to run so
that TSM can see the tapes in the library.

Just can't get to it! Q libv doesn't return any results..

Thanks in  advance!

Jerome



**
COMPUTACENTER PLC is registered in England and Wales with the registered
number 03110569.  Its registered office is at Hatfield Business Park,
Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (UK) Limited is registered in England and Wales with the
registered number 01584718.  Its registered office is at Hatfield Business
Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (Mid-Market) Limited is registered in England and Wales with
the registered number 3434654. Its registered office is at Hatfield
Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (FMS) Limited is registered in England and Wales with the
registered number 3798091. Its registered office is at Hatfield Business
Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW

The contents of this email are intended for the named addressee only.
It contains information which may be confidential and which may also be
privileged.
Unless you are the named addressee (or authorised to receive mail for the
addressee) you may not copy or use it, or disclose it to anyone else.
If you receive it in error please notify us immediately and then destroy
it.
Computacenter information is available from: http://www.computacenter.com
**




--
*Zoltan Forray*
TSM Software & Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu - 804-828-4807
Don't be a phishing victim - VCU and other reputable organizations will
never use email to request that you reply with your password, social
security number or confidential personal information. For more details
visit http://infosecurity.vcu.edu/phishing.html

Re: TSM cmd after library has been defined again..

[Swartz, Jerome]

Hi Harold,

Yes, doing it that way. Thought there was an easier way of updating the volumes 
in the library.

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
Vandeventer, Harold [BS]
Sent: 27 November 2012 09:12 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

Are you needing to run a CHECKIN libvname  to get the inventory 
of tapes into the TSM system?


Harold Vandeventer
Systems Programmer
State of Kansas - Office of Information Technology Services 
harold.vandeven...@ks.gov
(785) 296-0631

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
Swartz, Jerome
Sent: Tuesday, November 27, 2012 1:01 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

W2K3 server, TSM 5.5 

Library is a IBM 3584

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Zoltan 
Forray
Sent: 27 November 2012 08:54 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

More info.  What kind/make/model of library?  What OS/platform? We have a
3494 accessed via Linux servers so what I do isn't the same as what you might 
do


On Tue, Nov 27, 2012 at 1:37 PM, Swartz, Jerome < 
jerome.swa...@computacenter.com> wrote:

> Hi All,
>
> Haven't touched TSM in a while. Needed to delete the paths, drives and 
> library.
>
> I just defined those again and there is a command that I need to run 
> so that TSM can see the tapes in the library.
>
> Just can't get to it! Q libv doesn't return any results..
>
> Thanks in  advance!
>
> Jerome
>
>
>
> **
> COMPUTACENTER PLC is registered in England and Wales with the 
> registered number 03110569.  Its registered office is at Hatfield 
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW 
> COMPUTACENTER (UK) Limited is registered in England and Wales with the 
> registered number 01584718.  Its registered office is at Hatfield 
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW 
> COMPUTACENTER (Mid-Market) Limited is registered in England and Wales 
> with the registered number 3434654. Its registered office is at 
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 
> 9TW COMPUTACENTER (FMS) Limited is registered in England and Wales 
> with the registered number 3798091. Its registered office is at 
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 
> 9TW
>
> The contents of this email are intended for the named addressee only.
> It contains information which may be confidential and which may also 
> be privileged.
> Unless you are the named addressee (or authorised to receive mail for 
> the
> addressee) you may not copy or use it, or disclose it to anyone else.
> If you receive it in error please notify us immediately and then 
> destroy it.
> Computacenter information is available from: 
> http://www.computacenter.com
> **
>



--
*Zoltan Forray*
TSM Software & Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu - 804-828-4807
Don't be a phishing victim - VCU and other reputable organizations will never 
use email to request that you reply with your password, social security number 
or confidential personal information. For more details visit 
http://infosecurity.vcu.edu/phishing.html

[Confidentiality notice:]
***
This e-mail message, including attachments, if any, is intended for the person 
or entity to which it is addressed and may contain confidential or privileged 
information.  Any unauthorized review, use, or disclosure is prohibited.  If 
you are not the intended recipient, please contact the sender and destroy the 
original message, including all copies, Thank you.
***

Re: netezza nzbackup connector for TSM

[Prather, Wanda]

There is a "TSM for Data Bases/Oracle" and a "TSM for Data Bases/MSSQL".
If you aren't installing that code (because you don't have either Oracle or 
SQL), I don't' see why you would need a license?


-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
Tailor, Mahesh C.
Sent: Tuesday, November 27, 2012 10:07 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] netezza nzbackup connector for TSM

What I have been told by the IBM partner is that in addition to the TSM 
connector that is built into the product, we would need to purchase licenses 
for the other products -- BA client and TSM for DB.  Yes, of the two TSM for DB 
is the majority of the cost.  I also questioned the need for the TSM for DB 
client as there is no "standard" -- Oracle, DB2, etc. -- database on the 
Netezza and have not received a definitive answer.

Thanks.
Mahesh


From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Tim Brown 
[tbr...@cenhud.com]
Sent: Tuesday, November 27, 2012 08:44
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] netezza nzbackup connector for TSM

Is the TSM for DB Client you refer to "the Connector". So far I prefer just 
native TSM with nzbackups.
With the 6 figure price tag, is the TSM for DB Client that you refer to the 
greatest $ amt of the 2.


Thanks,

Tim

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
Tailor, Mahesh C.
Sent: Monday, 26 November, 2012 5:14 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: netezza nzbackup connector for TSM

Hello.

On a similar thread: we are in the process of acquiring Netezza and will need 
to back it up to TSM.  We were told of the TSM Connector.  In trying to make 
sure we are in TSM license compliance, we were told that we would need to 
license both the TSM for BA client and the TSM for DB client.  If we were to 
license both TSM products, we are looking at cost in the six-figures. Can 
someone please advise as to how the TSM licensing works for this product?

Thanks in advance.
Mahesh


From: ADSM: Dist Stor Manager [ADSM-L@VM.MARIST.EDU] on behalf of Tim Brown 
[tbr...@cenhud.com]
Sent: Monday, October 29, 2012 11:34
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] netezza nzbackup connector for TSM

I am attempting to get the netezza backup utility working with tsm. They have a 
connector that allows backing up netezza backups directly into tsm.

Has anyone tried this and got it to work.

./nzbackup -u user -pw psw -db TDS -connector tivioli  -connectorArgs 
"TSM_PASSWORD=x"


Error: unable to connect to host 'localhost', port '5483' - Connection refused.


Thanks,

Tim Brown
Supervisor Computer Operations
Central Hudson Gas & Electric
284 South Ave
Poughkeepsie, NY 12601
Email: tbr...@cenhud.com <>
Phone: 845-486-5643
Fax: 845-486-5921
Cell: 845-235-4255


"This message contains confidential information and is only for the intended 
recipient. If the reader of this message is not the intended recipient, or an 
employee or agent responsible for delivering this message to the intended 
recipient, please notify the sender immediately by replying to this note and 
deleting all copies and attachments."



Notice: The information and attachment(s) contained in this communication are 
intended for the addressee only, and may be confidential and/or legally 
privileged. If you have received this communication in error, please contact 
the sender immediately, and delete this communication from any computer or 
network system. Any interception, review, printing, copying, re-transmission, 
dissemination, or other use of, or taking of any action upon this information 
by persons or entities other than the intended recipient is strictly prohibited 
by law and may subject them to criminal or civil liability. Carilion Clinic 
shall not be liable for the improper and/or incomplete transmission of the 
information contained in this communication or for any delay in its receipt.



Notice: The information and attachment(s) contained in this communication are 
intended for the addressee only, and may be confidential and/or legally 
privileged. If you have received this communication in error, please contact 
the sender immediately, and delete this communication from any computer or 
network system. Any interception, review, printing, copying, re-transmission, 
dissemination, or other use of, or taking of any action upon this information 
by persons or entities other than the intended recipient is strictly prohibited 
by law and may subject them to criminal or civil liability. Carilion Clinic 
shall not be liable for the improper and/or incomplete transmission of the 
information contained in this communication or for any delay in its receipt.

Re: Who is performing Client Based Encryption and Compression

[Prather, Wanda]

For compression:

q actlog begindate=today-ndays search=ane4968

Non-zero values mean the client is compressing.




-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
Harris, Chad
Sent: Tuesday, November 27, 2012 5:04 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Who is performing Client Based Encryption and Compression

Fellow TSM Admins,

We are in the process of bringing VTLs into our TSM Environment.  In order to 
take full advantage of deduplication features on the VTL we need to go after 
the clients that are performing client based encryption and compression.  With 
that in mind, does anyone know an easy way to tell which clients are using 
these features?

Thanks,
Chad Harris 

Re: TSM cmd after library has been defined again..

[Skylar Thompson]

First check in your scratch tapes:

checkin libv  search=y checkl=b status=scr

Then your private tapes (storage pool, DB backup, export, etc.):

checkin libv  search=y checkl=b status=priv

Make sure to do it in this order, or all your scratch tapes will become
private.

-- Skylar Thompson (skyl...@u.washington.edu)
-- Genome Sciences Department, System Administrator
-- Foege Building S046, (206)-685-7354
-- University of Washington School of Medicine

On 11/27/12 10:37 AM, Swartz, Jerome wrote:

Hi All,

Haven't touched TSM in a while. Needed to delete the paths, drives and library.

I just defined those again and there is a command that I need to run so that 
TSM can see the tapes in the library.

Just can't get to it! Q libv doesn't return any results..

Thanks in  advance!

Jerome



**
COMPUTACENTER PLC is registered in England and Wales with the registered number 
03110569.  Its registered office is at Hatfield Business Park, Hatfield Avenue, 
Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (UK) Limited is registered in England and Wales with the 
registered number 01584718.  Its registered office is at Hatfield Business 
Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (Mid-Market) Limited is registered in England and Wales with the 
registered number 3434654. Its registered office is at Hatfield Business Park, 
Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (FMS) Limited is registered in England and Wales with the 
registered number 3798091. Its registered office is at Hatfield Business Park, 
Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW

The contents of this email are intended for the named addressee only.
It contains information which may be confidential and which may also be 
privileged.
Unless you are the named addressee (or authorised to receive mail for the 
addressee) you may not copy or use it, or disclose it to anyone else.
If you receive it in error please notify us immediately and then destroy it.
Computacenter information is available from: http://www.computacenter.com
**

Re: TSM cmd after library has been defined again..

[Zoltan Forray]

More info.  What kind/make/model of library?  What OS/platform? We have a
3494 accessed via Linux servers so what I do isn't the same as what you
might do


On Tue, Nov 27, 2012 at 1:37 PM, Swartz, Jerome <
jerome.swa...@computacenter.com> wrote:

> Hi All,
>
> Haven't touched TSM in a while. Needed to delete the paths, drives and
> library.
>
> I just defined those again and there is a command that I need to run so
> that TSM can see the tapes in the library.
>
> Just can't get to it! Q libv doesn't return any results..
>
> Thanks in  advance!
>
> Jerome
>
>
>
> **
> COMPUTACENTER PLC is registered in England and Wales with the registered
> number 03110569.  Its registered office is at Hatfield Business Park,
> Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
> COMPUTACENTER (UK) Limited is registered in England and Wales with the
> registered number 01584718.  Its registered office is at Hatfield Business
> Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
> COMPUTACENTER (Mid-Market) Limited is registered in England and Wales with
> the registered number 3434654. Its registered office is at Hatfield
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
> COMPUTACENTER (FMS) Limited is registered in England and Wales with the
> registered number 3798091. Its registered office is at Hatfield Business
> Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
>
> The contents of this email are intended for the named addressee only.
> It contains information which may be confidential and which may also be
> privileged.
> Unless you are the named addressee (or authorised to receive mail for the
> addressee) you may not copy or use it, or disclose it to anyone else.
> If you receive it in error please notify us immediately and then destroy
> it.
> Computacenter information is available from: http://www.computacenter.com
> **
>



--
*Zoltan Forray*
TSM Software & Hardware Administrator
Virginia Commonwealth University
UCC/Office of Technology Services
zfor...@vcu.edu - 804-828-4807
Don't be a phishing victim - VCU and other reputable organizations will
never use email to request that you reply with your password, social
security number or confidential personal information. For more details
visit http://infosecurity.vcu.edu/phishing.html

hsm for windows and include / exclude

[Lee, Gary]

Anyone out there playing with hsm for windows, are there any of the include or 
exclude statements useable in the dsm.opt?

We are trying to implement a university wide policy of moving all files not 
accessed in A specified time to tsm storage.
I would like to automate this as much as possible.  Our backups are set with a 
default set of includes and excludes, so that our schedules use the standard 
incremental command.

I want to try and create something similar for hsm.

Any help and insites are appreciated.


Gary Lee
Senior System Programmer
Ball State University
phone: 765-285-1310

 

Re: TSM cmd after library has been defined again..

[Bob Levad]

Jerome,

If your cleaning tapes are known to TSM, you'll need to check them back in also 
with the number of cleanings remaining.

Q libv  CL* f=d should show number of cleanings remaining before you drop 
the library.

checkin libv  search=y stat=clean checkl=bar clean=<# remaining> will 
check in your media.

You may want to eject and insert them individually if they have a different 
number of cleanings remaining on each.

It's usually best to let the library handle the cleanings if you can keep TSM 
out of it.

Bob

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of 
Ribeiro, Ricardo
Sent: Tuesday, November 27, 2012 1:15 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

Here is an easier one...

Syntax for a SCSI library

>>-LABEl LIBVolume--library_name>
more...   ( to continue, 'C' to cancel)


>+-volume_name+
 '-SEARCH--=--+-Yes--| A |--+--LABELSource--=--+-Barcode+-'
  '-Bulk--| A |-'  +-Prompt-+
   '-Vollist--| B |-'

.-OVERWRITE--=--No--.
>--+-+--+---+--->
   '-CHECKIN--=--+-SCRatch-+-'  '-OVERWRITE--=--+-No--+-'
 '-PRIvate-''-Yes-'




-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@vm.marist.edu] On Behalf Of Remco 
Post
Sent: Tuesday, November 27, 2012 11:55 AM
To: ADSM-L@vm.marist.edu
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

checkin libv  search=y stat=scr checkl=[bar|yes] checkin libv  
search=y stat=priv checkl=[bar|yes]

in that order


On 27 nov. 2012, at 19:37, "Swartz, Jerome"  
wrote:

> Hi All,
>
> Haven't touched TSM in a while. Needed to delete the paths, drives and 
> library.
>
> I just defined those again and there is a command that I need to run so that 
> TSM can see the tapes in the library.
>
> Just can't get to it! Q libv doesn't return any results..
>
> Thanks in  advance!
>
> Jerome
>
>
>
> **
> COMPUTACENTER PLC is registered in England and Wales with the
> registered number 03110569.  Its registered office is at Hatfield
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
> COMPUTACENTER (UK) Limited is registered in England and Wales with the
> registered number 01584718.  Its registered office is at Hatfield
> Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
> COMPUTACENTER (Mid-Market) Limited is registered in England and Wales
> with the registered number 3434654. Its registered office is at
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10
> 9TW COMPUTACENTER (FMS) Limited is registered in England and Wales
> with the registered number 3798091. Its registered office is at
> Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10
> 9TW
>
> The contents of this email are intended for the named addressee only.
> It contains information which may be confidential and which may also be 
> privileged.
> Unless you are the named addressee (or authorised to receive mail for the 
> addressee) you may not copy or use it, or disclose it to anyone else.
> If you receive it in error please notify us immediately and then destroy it.
> Computacenter information is available from:
> http://www.computacenter.com
> **

--
Met vriendelijke groeten/Kind Regards,

Remco Post
r.p...@plcs.nl
+31 6 248 21 622
This electronic transmission and any documents accompanying this electronic 
transmission contain confidential information belonging to the sender. This 
information may be legally privileged. The information is intended only for the 
use of the individual or entity named above. If you are not the intended 
recipient, you are hereby notified that any disclosure, copying, distribution, 
or the taking of any action in reliance on or regarding the contents of this 
electronically transmitted information is strictly prohibited.

Who is performing Client Based Encryption and Compression

[Harris, Chad]

Fellow TSM Admins,

We are in the process of bringing VTLs into our TSM Environment.  In order to 
take full advantage of deduplication features on the VTL we need to go after 
the clients that are performing client based encryption and compression.  With 
that in mind, does anyone know an easy way to tell which clients are using 
these features?

Thanks,
Chad Harris 

Re: TSM cmd after library has been defined again..

[Rick Saylor]

You probably will want to specify remove=no on the checkout command.

At 02:20 PM 11/27/2012, you wrote:

checkout all and checkin againg
On 28.11.2012 0:05, Swartz, Jerome wrote:

Too late.. They all private now..

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On
Behalf Of Skylar Thompson
Sent: 27 November 2012 08:59 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM cmd after library has been defined again..

First check in your scratch tapes:

checkin libv  search=y checkl=b status=scr

Then your private tapes (storage pool, DB backup, export, etc.):

checkin libv  search=y checkl=b status=priv

Make sure to do it in this order, or all your scratch tapes will
become private.

-- Skylar Thompson (skyl...@u.washington.edu)
-- Genome Sciences Department, System Administrator
-- Foege Building S046, (206)-685-7354
-- University of Washington School of Medicine

On 11/27/12 10:37 AM, Swartz, Jerome wrote:

Hi All,

Haven't touched TSM in a while. Needed to delete the paths, drives
and library.

I just defined those again and there is a command that I need to
run so that TSM can see the tapes in the library.

Just can't get to it! Q libv doesn't return any results..

Thanks in  advance!

Jerome



**
COMPUTACENTER PLC is registered in England and Wales with the
registered number 03110569.  Its registered office is at Hatfield
Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (UK) Limited is registered in England and Wales with the
registered number 01584718.  Its registered office is at Hatfield
Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10 9TW
COMPUTACENTER (Mid-Market) Limited is registered in England and Wales
with the registered number 3434654. Its registered office is at
Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10
9TW COMPUTACENTER (FMS) Limited is registered in England and Wales
with the registered number 3798091. Its registered office is at
Hatfield Business Park, Hatfield Avenue, Hatfield, Hertfordshire AL10
9TW

The contents of this email are intended for the named addressee only.
It contains information which may be confidential and which may
also be privileged.
Unless you are the named addressee (or authorised to receive mail
for the addressee) you may not copy or use it, or disclose it to anyone else.
If you receive it in error please notify us immediately and then destroy it.
Computacenter information is available from:
http://www.computacenter.com
**




Rick Saylor  Austin Community College   Voice: (512)223-1182
Director of System Services  9101 Tuscany Way   Fax:   (512)223-1211
Information Technology   Austin, Texas  78754

Re: Strange dirmc

[Robert Ouzen]

Andy ,

Here some results of the suggestions you made:

dsmc q mg -detail 

MgmtClass Name  : MGLAW
Description :
Space Management Technique  : None
Auto Migrate on Non-Usage   : 0
Backup Required Before Migration: NO
Destination for Migrated Files  : DD_LAW
Copy Group
Copy Group Name: STANDARD
Copy Type..: Backup
Copy Frequency.: 0 day(s)
Versions Data Exists...: 7 version(s)
Versions Data Deleted..: 1 version(s)
Retain Extra Versions..: No Limit
Retain Only Version: 120 day(s)
Copy Serialization.: Dynamic
Copy Mode..: Modified
Copy Destination...: DD_LAW

  Create a new directory and run on it an incremental backup:

tsm> i /home/robert/test/ -su=yes

Incremental backup of volume '/home/robert/test/'
Successful incremental backup of '/home/robert/test/*'


Total number of objects inspected:2
Total number of objects backed up:0
Total number of objects updated:  0
Total number of objects rebound:  0
Total number of objects deleted:  0
Total number of objects expired:  0
Total number of objects failed:   0
Total number of bytes transferred:   0  B
Data transfer time:0.00 sec
Network data transfer rate:0.00 KB/sec
Aggregate data transfer rate:  0.00 KB/sec
Objects compressed by:0%
Elapsed processing time:   00:00:03

tsm> q ba /home/robert/test -dirsonly

   SizeBackup DateMgmt Class   A/I File
   -----   --- 
   128  B  11/28/12   07:45:40  MGLAW   A  
/home/robert/test

Nothing wrong in the dsmerror.log

I before this test I run a mode nodedata lawsrv from=dd_education to=dd_law to 
have a clean environment.

After the backup I run a new q nodedata lawsrv and result correct , storage 
pool taken DD_LAW

tsm: POSTBACK>q nodedata lawsrv

Node NameVolume NameStorage Pool 
Physical
Name  
Space
 
Occupied
   
(MB)
 --  

LAWSRV   \\DD580G\BACKUP\POSTBACK\LAW\- DD_LAW   
19,771.8
  .BFS  
 4
LAWSRV   \\DD580G\BACKUP\POSTBACK\LAW\- DD_LAW   
50,988.2
  0001.BFS  
 5
LAWSRV   \\DD580G\BACKUP\POSTBACK\LAW\- DD_LAW   
51,032.0
  0002.BFS  
 5
LAWSRV   \\DD580G\BACKUP\POSTBACK\LAW\- DD_LAW   
51,004.0
  0003.BFS  
 4

I am really confuse now everything seems O.K , I will wait to the next schedule 
backup and will check again .

Will let you know ..

Again really appreciate your help., nice day

Robert Ouzen
Haifa University
Israel

-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Andrew 
Raibeck
Sent: Tuesday, November 27, 2012 6:36 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Strange dirmc

Robert,

Have you checked the dsmerror.log in case there is some message there that 
hints why the wrong management class is used for directories?

Can you reproduce this with the command line client? Create a new directory, 
such as /home/robert/newdir. Add a file or two. Then back it up,
e.g.:

   dsmc i /home/robert/newdir/ -subdir=yes

Then query the directory backup:

   dsmc q ba /home/robert/newdir -dirsonly

Does it show the wrong management class? Check dsmerror.log. Are there any 
messages there?

Also run:

   dsmc q mg -detail

And examine the MGLAW management class. What does it show?

Best regards,

Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Product Development Level 3 Team Lead Internal 
Notes e-mail: Andrew Raibeck/Hartford/IBM@IBMUS Internet e-mail: 
stor...@us.ibm.com

IBM Tivoli Storage Manager support web page:
http://www.ibm.com/support/entry/portal/Overview/Software/Tivoli/Tivoli_Storage_Manager

"ADSM: Dist Stor Manager"  wrote on 2012-11-27
10:28:08:

> From: Robert Ouzen 
> To: ADSM-L@vm.marist.edu,
> Date: 2012-11-27 10:54
> Subject: Re: Strange dirmc
> Sent by: "ADSM: Dist Stor Manager" 
>
> Hi Andy
>
> Thank you for your fast reply ...
> As you see the dirmc is point to the correct management mglaw
>
> q option dirmc
> DIRMC: MGLAW
>
> I have only one sta