On 13-stable (n253148), am seeing in the console at startup
savecore[1415]: /dev/ada0s1b: Operation not permitted
Writing crash summary to /var/crash/core.txt.3.
It's enabled in rc.conf:
# sysrc savecore_enable
savecore_enable: YES
# dumpon -l
ada0s1b
What's broken?
tia,
--
On Sat, 26 Nov 2022, at 19:17, Warner Losh wrote:
> What's your secure level? Can you run the command by hand after boot?
> (Usually on modern systems you don't swap right away and have time for
> a test like that).
thanks, I'll try that
> Trying to see if this is prohibited by secure level or
Hello stable@
How does one avoid periodic(8) during long poudriere runs?
I find that it'll cause the system to thrash if periodic
starts when poudriere is running. is there some established
way of telling it not to run when, for example, 5 min load
is over 2.00 ? I've seen ubuntu do similar, bu
On Sat, Jan 21, 2023 at 07:55:05PM +0100, Mathias Picker wrote:
I have this for some time, had no time to look into this, but
today I deleted /usr/src, fetched source again, switched to
stable/13, did a su -l root, removed /etc/make.conf and rebuild,
same error.
Not sure if you've tried this, b
On Mon, Jul 31, 2023 at 06:42:24PM +0100, void wrote:
Next to try is setting destination usb3 MBR/ufs2 and setting it active in
alt-f4 before booting.
gpart show da4 on the install media shows slice 2 [freebsd] as active in mbr
Ensured this was the case, and the destination usb3 booted
Hi stable@
I'm having odd problems booting an installation to usb3 disk or stick.
steps-to-reproduce:
1. download (e.g:)
https://download.freebsd.org/releases/ISO-IMAGES/13.2/FreeBSD-13.2-RELEASE-amd64-memstick.img
2. write it to usb3. We'll call this one the installation usb3
3. boot it up an
Hello stable@
I'm trying to run powerd (stable/13-n254781) but it fails to load, and this
appears in dmesg:
interface hwpstate_intel.1 already present in the KLD 'kernel'!
linker_load_file: /boot/kernel/cpufreq.ko - unsupported file type
and, earlier:
est0: numa-domain 0 on cpu0
est: CPU supp
Hi Mark,
On Wed, Aug 09, 2023 at 07:52:59PM -0400, Mark Saad wrote:
Hi void
It will work , you will need to re-enable c-states and p-states
etc in the bios . Dmesg is only showing the cpu has the options but
the bios controls the ability to use it . Iirc hp has some opaque
options to
Hello list,
tl;dr: I'd like to have a smaller/better font/finer "graphics" in a
non-xorg console.[1] Is this possible with FreeBSD at the moment?
I can see there's "sc" and "vt" in the kernel but have never successfully
set a console screen font going by the handbook. In addition to the font
In dmesg I see the following:
VT(vga): resolution 640x480
VT-x: Basic Features=0xda0400
x86bios: IVT 0x00-0x0004ff at 0xf800
vtvga0:
VT(vga): resolution 640x480
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
vtvga0:
How can I change the 640x480 to say 1920x1080 ?
--
On Fri, Aug 25, 2023 at 10:04:01AM -0600, Warner Losh wrote:
The only way I know is to use UEFI and control it that way...
How would I change from bios to uefi?
--
Hi,
On Sat, Aug 26, 2023 at 10:37:56AM +0200, Helge Oldach wrote:
For historical reasons I'm using "sc". Enabled by
| kern.vty="sc"
in /boot/loader.conf.
What are the historical reasons? (sorry - it would help me to understand the
why)
From my reading so far, it would seem that vt is less
Hello list,
I'm asking this in order to determine whether I've got something misconfigured
or
maybe my expectations need recalibrating, or maybe both.
context is rpi4b with 8GB and usb3-connected 1tb zfs hard disk.
/etc/daily.local has been moved out of the way to try to fix the issue.
When pe
orts/testing
zroot/usr 22.1G 790G96K /usr
zroot/usr/home13.5G 790G 13.5G /usr/home
zroot/usr/home/tmp 144K 790G 144K
/usr/home/void/tmp
zroot/usr/obj
On Fri, Oct 27, 2023 at 01:45:24PM +0200, Ronald Klop wrote:
Can you run "gstat" or "iostat -x -d 1" to see how busy your disk is?
And how much bandwidth is uses.
when periodic is *not* running, gstat numbers fluctuate between whats
indicated below and all zeros:
dT: 1.011s w: 1.000s
L(q)
On Fri, Oct 27, 2023 at 02:46:39PM +0200, Ronald Klop wrote:
Mmm. Your pool has a lot of space left. So that is good.
About gstat / iostat, yes during the daily scan would be nice. The numbers
outside of the daily scan can also help as a reference.
NB: There were talks on the ML about vnode r
On Fri, Oct 27, 2023 at 03:34:35PM +0200, Ronald Klop wrote:
What stands out to me is that you do quite a lot of writes on the disk. (I
might be mistaken.)
The max. number of IOPS for HDD is around 80 for consumer grade harddisks. I
think this counts for USB connected disks.
https://en.wikiped
Hi,
On Fri, Oct 27, 2023 at 11:01:03AM -0400, Paul Mather wrote:
This doesn't affect the periodic daily run (to my knowledge)
# ps x | grep periodic
59319 14 S+ 0:00.00 grep periodic
27376 17 I+ 0:00.00 /bin/sh - /etc/periodic/security/110.neggrpperm
27987 17 I+ 0:00.00
On Fri, Oct 27, 2023 at 05:23:49PM +0200, Ronald Klop wrote:
Well. You could remove daily_clean_disks_enable="YES" from /etc/periodic.conf.
That saves you the "find". I have never used it before. The default is "off".
Yes, I'll try that, but it's a very recent addition. The periodic daily prob
On Fri, Oct 27, 2023 at 05:38:58PM +0200, Guido Falsi wrote:
If this script is the culprit is easily tested, disable it and see. I
guess you can stay a few days without checking for negative
permissions.
I'm unsure how to disable that one script from periodic. but I think
that what you recomm
On Fri, Oct 27, 2023 at 05:38:58PM +0200, Guido Falsi wrote:
Also, $MP is defined in such a way to exclude filesystems that set
"nosuid/noexec". I do happen to have those setup for my ccache
directory so it is skipping that.
With zfs it is especially easy to set these flags, and I think havin
On Fri, Oct 27, 2023 at 05:38:58PM +0200, Guido Falsi wrote:
I have this for ccache FS (zfs):
dumpster/ccache atime on local
I wondered why you have this set to 'on'?
I mean I know /var/mail needs it for mail to function. Is it the same
wiht ccache ?
--
On Sun, Oct 29, 2023 at 12:49:14AM +0200, Guido Falsi wrote:
Correcting myaelf:
The version we currently have in the ports tree (3.7.x) does not care
for atime, as far as I can see in the source code. It checks mtime
only.
Newer versions do use it though!
Thanks for checking. I've set it
Hi,
This context [1] was on stable/14-n265566 where pf worked fine. Source upgrade
yesterday to stable/14-n265566 and pf is now broken.
# service pf status
/usr/src/sys/contrib/libnv/nvlist.c:379: Element 'halfopen_states' of type
NUMBER doesn't exist.
Abort trap (core dumped)
To try and debug
It seems some dirs don't get deleted with make delete-old:
# yes | make delete-old
[...]
/usr/share/doc/atf
rmdir: /usr/share/certs/blacklisted: Directory not empty
/usr/share/atf
[...]
/usr/lib/debug/lib
rmdir: /usr/lib/debug/boot: Directory not empty
/usr/lib/debug/bin
is this an error?
cont
On Fri, Dec 08, 2023 at 05:33:29PM +0100, Herbert J. Skuhra wrote:
Do you use WITHOUT_DEBUG_FILES= in /etc/src.conf?
Bingo!
% ug DEBUG /etc/src.conf
9: WITHOUT_ASSERT_DEBUG=
17: WITHOUT_DEBUG_FILES=
so it's unable to be deleted because it's not there ;)
(I guess? though i'd have expecte
Context is stable/13-n257165-4c4633fdffbe amd64 built
Mon Jan 15 00:20:52 2024 UTC
In the console, the following is displayed
Security policy loaded: MAC/ntpd (mac_ntpd)
Starting ntpd.
Jan 15 00:26:48 cloud ntpd[3412]: leapsecond file
('/var/db/ntpd.leap-seconds.list'): expired 19 days ago
How
Hi,
On Mon, 15 Jan 2024, at 01:45, Warner Losh wrote:
> Add
>
> ntp_leapfile_sources="https://hpiers.obspm.fr/iers/bul/bulc/ntp/leap-seconds.list";
>
> to your /etc/rc.conf file. This is the reliable, freely available
> source for the leap seconds
> list. We should make that the default, but doi
On Sat, 24 Feb 2024, at 14:12, S.N.Grigoriev wrote:
> Hi, list,
>
> I've found out that my USB CD drive does not work with my 14-Stable (amd64).
> It works fine with Linux and Windows and in past worked fine with 12-Stable.
>
> The following is from /var/log/messages:
>
> kernel: usb_alloc_device:
On Sun, 25 Feb 2024, at 10:07, S.N.Grigoriev wrote:
> Hi, void,
>
> thank you for your response! My kernel config is:
>
> ##
> include GENERIC
>
> ident GEN
>
> # No sound support
> nodevicesound
> nodevicesnd_cmi
Another thing maybe worthwhile trying is to just have that one thing
plugged into the usb subsystem. Beforehand, tail -f /var/log/messages
in an xterm, unplug everything usb (2&3), plug in the cd drive,
observe messages.
On Sun, 25 Feb 2024, at 16:14, S.N.Grigoriev wrote:
>> Another thing maybe worthwhile trying is to just have that one thing
>> plugged into the usb subsystem. Beforehand, tail -f /var/log/messages
>> in an xterm, unplug everything usb (2&3), plug in the cd drive,
>> observe messages.
>
> I've done
I get the following from my own portable BD machine, from the lsusb command:
Bus /dev/usb Device /dev/ugen0.10: ID 0e8d:1956 MediaTek Inc. Samsung SE-506
Portable BluRay Disc Writer
There's also lots of "can't get device qualifier: Input/output error" with -v
but it's not stopping the disk from
Hi,
In 14-stable on amd64, what's the default value for KVA_PAGES ?
I'm asking because WINE says something about it:
"Some ZFS tuning guides recommend setting KVA_PAGES=512 in your kernel
configuration. This is incompatible with Wine. The maximum possible
is KVA_PAGES=500, which should still b
On Fri, 8 Mar 2024, at 10:25, Miroslav Lachman wrote:
> # config -x /boot/kernel/kernel | grep -i kva_pages
>
> (it is empty on amd64)
aha, makes sense. It's 64-bit only here.
thanks all,
Hi,
Got the following error when running second freebsd-update upgrade incantation
after first reboot:
# /usr/sbin/freebsd-update install
src component not installed, skipped
Installing updates...install: ///usr/include/c++/v1/__string/INS@KrFwVd: No
such file or directory
install: ///usr/tests
After upgrading, I noticed messages like these appearing during
rebooting, immediately after kernel: NFS access cache time=60
kernel: rpc.umntall: 10.1.1.102: MOUNTPROG: RPC: Port mapper failure - RPC:
Timed out
sometimes it appears twice, once it appeared five times. The system
eventually comp
Hi Rick,
On Thu, Jun 27, 2024 at 09:29:51AM -0700, Rick Macklem wrote:
rpcbind_enable="YES"
nfs_client_enable="YES"
If you have at least one of these in your /etc/rc.conf, then all I can think
of is some sort of network/routing issue that interferes with rpcbind working.
I have nfs_client_en
On Fri, Jun 28, 2024 at 01:23:29PM +0100, void wrote:
(snip)
Just to add to this, the reported error does *not* occur on
15.0-CURRENT #5 n270917-5dbf886104b4 arm64
and that system has *only* nfs_client_enable="YES"
and it's a slower system
--
Hi Rick,
The nfs server is 14-stable and the exported dir is zfs with the sharenfs
property set.
The client (14.1-p1) is a VM on a different machine but the same network.
I'll try putting rpcbind_enable=YES in /etc/rc.conf
Probably won't make any difference.
Sorry for hte slow response -
Hi Rick,
There's no freebsd machine I've ever had (any version) that has had the
ip specified without the netmask keyword in /etc/rc.conf.
Until https://lists.freebsd.org/archives/freebsd-current/2024-June/006075.html
I didn't even know it was possible to configure networking and have it work
Hi,
I can't mount an nfs share when the client is openbsd 7.5
The nfs server is freebsd stable/14-n266883-7a3d7b29f83e
I *can* mount it from a debian client, and other freebsd
machines have no issues
Is it a freebsd issue or an openbsd issue?
https://marc.info/?l=openbsd-misc&m=172191444915091
On Wed, Jul 31, 2024 at 12:52:59PM -0400, Mark Saad wrote:
Void silly question on obsd do you have pf up and running ? If so can you try
w/o pf ?
Hi yes pf is *not* active on the openbsd machine
If you look at https://marc.info/?l=openbsd-misc&m=172191444915091&w=2 you'll
se
hello stable,
14.2-PRERELEASE DESKTOP amd64 1401503 1401503
Upon booting, seeing this in the console
Oct 29 12:57:17 desktop kernel: Starting devd.
Oct 29 12:57:17 desktop kernel: sh: /usr/sbin/automount: not found
Oct 29 12:57:17 desktop syslogd: last message repeated 19 times
Oct 29 12:57:17
On Tue, Oct 29, 2024 at 07:58:15PM +0100, Herbert J. Skuhra wrote:
Do you use WITHOUT_AUTOFS in src.conf?
WITHOUT_AUTOFS
Do not build autofs(5) related programs, libraries, and kernel
modules.
d'oh. sorry for the noise, thanks for the tip.
i was too narrowly focuss
On Sat, 2 Nov 2024, at 19:08, Warner Losh wrote:
>
> I've tested EFI and BIOS and I have a couple of reports that it works
> on BIOS so far.
Thanks Warner, it's working fine now
--
The ascii display menu is now broken after updating to
14.2-PRERELEASE stable/14-n269388-1821145f28e9
It shows what looks like control characters in where the borders
of the menus are usually.
This is on amd64. I *think* it uses 'legacy'
--
On Thu, Oct 31, 2024 at 12:16:46PM -0600, Warner Losh wrote:
Ok. So this is on bare metal with BIOS boot? I was hoping for a bhyve
method since i don't have any rwal bios machines anymore.
Yeah it's on bare metal.
I can spin up a vm, bring it to stable/14-n269388-1821145f28e9 but
it'll take a
On Thu, Oct 31, 2024 at 11:23:32AM -0600, Warner Losh wrote:
On Thu, Oct 31, 2024 at 9:58 AM void wrote:
The ascii display menu is now broken after updating to
14.2-PRERELEASE stable/14-n269388-1821145f28e9
It shows what looks like control characters in where the borders
of the menus are
On Wed, Oct 30, 2024 at 06:50:15AM +0100, ft wrote:
Hello,
apache24 runs in a jail.
service apache24 reload doesn't work?
I think you need to run it with -j
% service -h
Usage:
service [-j ] -e
service [-j ] -R
service [-j ] [-v] -l | -r
service [-j ] [-v] [-E var=value] start|stop|etc.
ser
On Sat, Nov 02, 2024 at 10:42:16AM -0600, Warner Losh wrote:
OK. This is because the text-only boot loader only supports cons25-level of
character set (which is ASCII + upper page IBMPC)
rather than Unicode. There's 0 chance that unicode support will be added to
that boot loader (you need the gra
On Mon, Dec 23, 2024 at 08:45:18PM -0700, Warner Losh wrote:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=275419
I think this is what you're looking for. There's a lot of other bugs marked
duplicates of that one.
Might be a case of same problem different reason,
see https://bugs.freebsd
On Tue, Dec 24, 2024 at 05:58:26PM +0100, Ronald Klop wrote:
I had this a while ago. Copied the missing file from another system.
Didn’t find the root cause.
Freebsd-update could be improved on resilience for inconsistent systems I
assume.
I'm unsure how inconsistency could have arisen, if t
Hi,
On Sat, 18 Jan 2025, at 20:18, Warner Losh wrote:
> It's expected.
>
> First, I'd skip using MBR. It's super limited, kinda hard and uses
> weird things. Using
> GPT will just work. MBR should generally only be used for legacy uses,
> but it should all
> work, once you do it correctly.
The
On Sat, Jan 18, 2025 at 01:18:20PM -0700, Warner Losh wrote:
(snip)
Just checked - FreeBSD-14.2-RELEASE-amd64-disc1.iso installer still
automatically goes to MBR, one has to select GPT when installing auto-ufs.
Might be an idea to change the default to GPT if that's what FreeBSD would
like to p
On Sat, Jan 18, 2025 at 06:15:25PM -0700, Warner Losh wrote:
Wierd. All the installs I've done in the last what feels like a decade have
defaulted to GPT. Are you installing onto media that's pre-formatted with MBR?
Nope. I install to an empty image created like this:
# truncate -s 64G vmimag
Hi,
context is freebsd 14.2-releng vm (amd64) that has been upgraded with
freebsd-update from 13.4.
Decided to add another disk so invoking the vm looks like this:
# sh vmrun.sh -c 4 -m 16G -t tap2 -d ./vm.img -d ./disk1.img vmname
used gpart to create an MBR for disk1.img. tried to make sli
On Mon, Jan 20, 2025 at 04:39:02PM +0300, Antony Uspensky wrote:
If I remember correctly, installer offers MBR on BIOS environment, and
GPT on UEFI. Try run your vm as UEFI machine.
A.
That's interesting.
I guess vmrun.sh is 'BIOS' in this context.
The host runs other VMs for other OS guest
On Mon, Dec 30, 2024 at 10:59:47AM -0700, Warner Losh wrote:
In this context, it's a known false positive. It's too risky to fix in a pX
for 13.4, so will be in 13.5 since the fix is already in stable/13. It's
just cosmetic, there's no bug it exposes.
Thank you for your full explanation.
--
On Tue, Dec 24, 2024 at 08:20:34PM +, Dave Cottlehuber wrote:
I have see this on very small (0,5-1GiB RAM) systems with low cpu. the system
log may show processes being killed off, if these are ones doing gzip or sha256
or similar, could that explain it? I've never had this issue on bigger s
Hello,
On upgrading 13.3-p11 to 13.4-p2 (amd64) the following is displayed after the
kernel parts finish installing, before the first reboot:
# /usr/sbin/freebsd-update install
src component not installed, skipped
Installing updates...ln: ///usr/share/man/man3/atf-sh-api.3.gz: No such file or
On a system that's been always maintained with freebsd-upgrade (and was
installed when 13.1 was new), the following gets printed in the console on boot
Dec 23 16:00:21 REDACTED ntpd[604]: leapsecond file
(‘/var/db/ntpd.leap-seconds.list’): expired 362 days ago
Whenever it's been upgraded, all
On Mon, Dec 23, 2024 at 05:54:27PM -0700, Warner Losh wrote:
Already been a PR that been fixed months ago.
Warner
Something must have unfixed it then, because this is from a few hrs ago.
Do you know the previous PR?
--
63 matches
Mail list logo
