On 06/02/2016 08:40 AM, Daniel Drotos wrote: > On Thu, 2 Jun 2016, Benjamin Larsson wrote: > >> https://github.com/merbanan/C8051F300_examples >> >> Everything worked fine. Then I switched to the C8051F330 mcu and all >> went to shit. Small examples worked somewhat but when compiling larger > > Every year our students build a small panel as a student project and > they are using it to learn programing micros. > > Once we used F020 later switched to F380. I've tried to adopt my own > written boot loader code to F380 and faced to some problems. On F380 > the watchdog is turning ON at reset, which caused some problems. Now > it works, but still behave mysterious. After a succesfull download of > the user code, power must be switched off before next download, > otherwise the programing is just fails. Reset is not enough. I've no > idea why. > > I don't know how it is releted to F300 and F330, it's just my > experience with Silabs. > > Daniel >
Yeah, it's a bit strange. I did dig some more and it seems to be caused by uart activity. With the Keil compiler the mcu seems to work reliable though. I might get back to this issue when I am abit more experience with this. MvH Benjamin Larsson ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Sdcc-user mailing list Sdcc-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sdcc-user
