Hello, I pasted the results here: http://pastebin.com/MrUCQaYv
Not sure if anyhow usable, but linker script looks like this http://pastebin.com/9ix3pNBc and the relevant part from pic14devices.txt http://pastebin.com/gJYhbx7H I can't spot anything suspicious. 2016-03-03 22:37 GMT+01:00 Gál Zsolt <tralitove...@freemail.hu>: > Could you send the results of the compiler when you add --verbose option? > > sdcc --use-non-free -mpic14 -ppic16f1829 tst.c --verbose > > 2016-03-03 11:27 GMT+01:00 Jaromir Sukuba <jarin...@gmail.com>: >> >> I started new clean virtual machine with 32-bit Linux Mint 17.3, ran >> all updates and then: >> >> 1, Installed gputils from source: >> # svn co https://gputils.svn.sourceforge.net/svnroot/gputils/trunk/gputils >> gputils_svn >> ----listing cut short---- >> - Checked out revision 1195. >> Then ran configure and make install as expected. >> # gpasm -v >> gpasm-1.4.2 #1194 (Mar 2 2016) >> >> 2, Installed SDCC from source >> downloaded last shapshot "sdcc-src-20160302-9509.tar.bz2" and ran >> # sudo apt-get install libboost-all-dev g++ texinfo >> then ran configure, make, make install as expected >> # sdcc -v >> SDCC : >> mcs51/z80/z180/r2k/r3ka/gbz80/tlcs90/ds390/pic16/pic14/TININative/ds400/hc08/s08/stm8 >> 3.5.5 #9509 (Linux) >> published under GNU General Public License (GPL) >> >> 3, Created new file tst.c containing >> void main (void) >> { >> while (1); >> } >> >> 4, Ran compilation for 16F877 >> # sdcc --use-non-free -mpic14 -ppic16f877 tst.c >> message: Using default linker script >> "/usr/local/share/gputils/lkr/16f877_g.lkr". >> and produces valid output >> >> 5, Ran compilation for 16F1829 >> # sdcc --use-non-free -mpic14 -ppic16f1829 tst.c >> message: Using default linker script >> "/usr/local/share/gputils/lkr/16f1829_g.lkr". >> error: Processor family mismatch in "idata.o". >> only tst.asm and tst.o are produced, no st or hex file, assuming >> because of failed link step >> >> Seems like other PIC16F1xxx MCUs are affected too, PIC16Fxxx are OK. >> >> By the way, I installed SDCC from source, because it is linked against >> GLIBC 3.4.20, emitting the "version `GLIBCXX_3.4.20' not found >> (required by ./sdcc)" message when running sdcc binaries, so running >> it on 32-bit Linux Mint 17.3 out of the box is not possible. >> On the other hand, on 64-bit Linux Mint 17.2 (running on real >> hardware) there isn't GLIBC problem, just the "idata.o" problem. >> >> >> >> >> >> >> 2016-03-01 23:54 GMT+01:00 Gál Zsolt <tralitove...@freemail.hu>: >> > Hello, >> > >> > Here is the test result again: >> > >> > sdcc --use-non-free -mpic14 -ppic16f877 tst.c >> > message: Using default linker script >> > "/usr/local/share/gputils/lkr/16f877_g.lkr". >> > >> > sdcc --use-non-free -mpic14 -ppic16f1829 tst.c >> > message: Using default linker script >> > "/usr/local/share/gputils/lkr/16f1829_g.lkr". >> > >> > sdcc -v >> > SDCC : pic14 3.5.5 #9509 (Linux) >> > published under GNU General Public License (GPL) >> > >> > gpasm -v >> > gpasm-1.4.2 #1186 (Feb 17 2016) >> > >> > What is the version number of your gputils? >> > >> > Regards, >> > >> > Zsolt Gál >> > >> > >> > >> > 2016-02-29 14:55 GMT+01:00 Jaromir Sukuba <jarin...@gmail.com>: >> >> >> >> Hello, >> >> this is my first post in here. >> >> >> >> I'm using SDCC to build project with PIC16F1829. It worked on two >> >> machines - one Linux box with SDCC snapshot 3.5.1 #9263, second one is >> >> windows machine with SDCC 3.5.4 #9360. I always used the latest >> >> snapshot. For Linux 3.5.0 build I have problem running the binary, due >> >> to the "GLIBC 3.4.20" problem. I'm trying to build the same project on >> >> third machine, with newest snapshot 3.5.5 #9509, but I'm running into >> >> problems. >> >> I isolated the problem to simplest source: >> >> >> >> When compiling simple source (tst.c) for PIC16F877 >> >> # sdcc --use-non-free -mpic14 -ppic16f877 tst.c >> >> message: Using default linker script >> >> "/usr/local/share/gputils/lkr/16f877_g.lkr". >> >> # >> >> >> >> though the same on PIC16F1829 >> >> # sdcc --use-non-free -mpic14 -ppic16f1829 tst.c >> >> message: Using default linker script >> >> "/usr/local/share/gputils/lkr/16f1829_g.lkr". >> >> error: Processor family mismatch in "idata.o". >> >> # >> >> >> >> where tst.c looks like: >> >> void main (void) >> >> { >> >> while (1); >> >> } >> >> >> >> For PIC16F877, there is normally generated code - for PIC16F1829, >> >> nothing. >> >> I tried to google for this error and this one looks similar >> >> https://sourceforge.net/p/sdcc/mailman/message/34324501/ though the >> >> changes that Gál Zsolt suggested seem to be in pic14device.txt file as >> >> expected: >> >> >> >> processor 16f1829, 16lf1829 >> >> program 8K >> >> data 1024 >> >> eeprom 256 >> >> enhanced 1 >> >> io 18 >> >> maxram 0x07f >> >> bankmsk 0xf80 >> >> config 0x8007 0x8008 >> >> regmap 0xf80 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 >> >> 0x08 0x09 0x0a 0x0b >> >> memmap 0x20 0x6f 0x000 >> >> memmap 0x70 0x7f 0xf80 >> >> >> >> >> >> Any idea what is the problem with my setup? Any additional info I can >> >> provide? >> >> >> >> Thanks, >> >> Jaromir Sukuba >> >> >> >> >> >> >> >> ------------------------------------------------------------------------------ >> >> Site24x7 APM Insight: Get Deep Visibility into Application Performance >> >> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month >> >> Monitor end-to-end web transactions and take corrective actions now >> >> Troubleshoot faster and improve end-user experience. Signup Now! >> >> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 >> >> _______________________________________________ >> >> Sdcc-user mailing list >> >> Sdcc-user@lists.sourceforge.net >> >> https://lists.sourceforge.net/lists/listinfo/sdcc-user >> > >> > >> > >> > >> > -- >> > ~~~~~~~~~~~~~~~~ >> > http://galzsolt.zzl.org >> > >> > >> > ------------------------------------------------------------------------------ >> > Site24x7 APM Insight: Get Deep Visibility into Application Performance >> > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month >> > Monitor end-to-end web transactions and take corrective actions now >> > Troubleshoot faster and improve end-user experience. Signup Now! >> > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 >> > _______________________________________________ >> > Sdcc-user mailing list >> > Sdcc-user@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/sdcc-user >> > >> >> >> ------------------------------------------------------------------------------ >> Site24x7 APM Insight: Get Deep Visibility into Application Performance >> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month >> Monitor end-to-end web transactions and take corrective actions now >> Troubleshoot faster and improve end-user experience. Signup Now! >> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 >> _______________________________________________ >> Sdcc-user mailing list >> Sdcc-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/sdcc-user > > > > > -- > ~~~~~~~~~~~~~~~~ > http://galzsolt.zzl.org > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 > _______________________________________________ > Sdcc-user mailing list > Sdcc-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/sdcc-user > ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Sdcc-user mailing list Sdcc-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sdcc-user
