I compiled your code with this command:
sdcc -mpic14 -p16f88 main.c
I tested in proteus simulator and it works too. I measured times and it
should be:
Led on for about 165ms
Led off for abour 165ms
Have you checked that pic is flashed right? I mean reading PIC code memory
and comparing with your hex.
Regards,
Diego Herranz
On Thu, Jun 9, 2011 at 1:51 PM, Laurent FAILLIE <l_fail...@yahoo.com> wrote:
> Ok, thanks all for your reply.
>
> > How did you know that the port/pin was stayed low? Did you
> > measured it
> > by osciloscope or by inspecting the LED (which was "never
> > turned on")?
>
> I did 2 checks :
> - initially with a RS-232 console and corresponding code on the PIC but has
> it didn't worked,
> - then I tried with this simple LED code.
> With LED, I checked only with a analogical Voltmeter (because at least it
> should notice some voltage ... but it stay desperately at 0.
>
> Definitively, I'll try with a more stabilized supply and put a capacity.
>
> Can you please confirm I didn't miss anything in my code ?
> I would like to ensure it's an hardware pb :)
>
> Best regards,
>
> Laurent
>
> ---
> The misspelling master is on the Web.
> _________ 100 % Dictionnary Free !
> / /(
> / Dico / / Pleins d'autres fautes sur
> /________/ /
> (#######( / http://destroyedlolo.info
> Quoi, des fautes d'orthographe! Pas possible ;-D.
>
>
> > Have you tried to test the following code?
> >
> > While(1)
> > {
> > PORTA=255;
> > RB5 = 1;
> > }
> >
> > If the code above worked, it's mean the delay wasn't
> > enough. You
> > should increase it from 30000 to higher value. If not,
> > check the power
> > supply quality as suggested before.
> >
> > Regards,
> > I Putu Susila
> >
> >
> ------------------------------------------------------------------------------
> > EditLive Enterprise is the world's most technically
> > advanced content
> > authoring tool. Experience the power of Track Changes,
> > Inline Image
> > Editing and ensure content is compliant with Accessibility
> > Checking.
> > http://p.sf.net/sfu/ephox-dev2dev
> > _______________________________________________
> > Sdcc-user mailing list
> > Sdcc-user@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/sdcc-user
> >
>
>
> ------------------------------------------------------------------------------
> EditLive Enterprise is the world's most technically advanced content
> authoring tool. Experience the power of Track Changes, Inline Image
> Editing and ensure content is compliant with Accessibility Checking.
> http://p.sf.net/sfu/ephox-dev2dev
> _______________________________________________
> Sdcc-user mailing list
> Sdcc-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/sdcc-user
>
------------------------------------------------------------------------------
EditLive Enterprise is the world's most technically advanced content
authoring tool. Experience the power of Track Changes, Inline Image
Editing and ensure content is compliant with Accessibility Checking.
http://p.sf.net/sfu/ephox-dev2dev
_______________________________________________
Sdcc-user mailing list
Sdcc-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sdcc-user
