Hello Pravin, Thanks for the header file. I have added it to SDCC.
I can't see anything wrong with your program except that it might take a long time (>1 min) for the led to blink. That is assuming that the LargeWait can count milliseconds as it claims. But that is completely dependent on your clock frequency. Greets, Maarten > Hello > > I have created a header file cc1110.h which is enclosed along with > this mail. Hope this is in line with what is recommended by you. > > Also i have enclosed a project blink2.rar which consists of a set of files > to blink an LED. > > I have tried using the linker options you have recommended but the code does > not seem to work when burnt on the processor. > > The steps that i followed to generate the hex file are as follows. > > i) compiling the modules separately > sdcc -c hal_wait.c > sdcc -c test3.c > > ii) Linking with the options > sdcc test3.rel hal_wait.rel --xram-loc 0xF000 --code-loc 0x0000 > --out-fmt-ihx > > iii) converting to standard format > packihx test3.ihx>blink.hex > > Kindly suggest what could be the next step. > > Regards > Pravin Angolkar > > On Fri, Feb 22, 2008 at 1:29 AM, Maarten Brock <[EMAIL PROTECTED]> > wrote: > > > Pravin, > > > > To use this mcu the first step I recommend is to create a header > > file for it with the SFR definitions. Make sure to create an alias > > for MPAGE with the name that SDCC expects: _XPAGE. You can use > > cc2530.h that comes with SDCC as a template. We would welcome it if > > you would give this header file in return to our community for > > inclusion in SDCC. > > > > Then when linking use the option --xram-loc 0xF000 and maybe --xram- > > size and --code-size. > > > > Greets, > > Maarten > > > > > On February 21, 2008 04:42:40 am pravin angolkar wrote: > > > > Hello > > > > > > > > I am trying to use SDCC with Texas Instruments SoC CC1110, > > which > > > > has an integrated 8051 CPU and RF transceiver. I want to port an > > > > application onto CC1110 using SDCC. Could anybody help me through the > > steps > > > > to be followed to add this particular processor as a new target for > > SDCC > > > > processor. > > > > > > > > Thanks & Regards > > > > Pravin Angolkar > > > > > > If the core is the same as the 8051 except for the SFRs, you should be > > able to > > > use the existing 8051 target. You would only have to provide the SFRs > > > specific to the CC1110 in an include file. > > > > > > Good luck! > > > > > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > _______________________________________________ > > Sdcc-user mailing list > > Sdcc-user@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/sdcc-user > > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Sdcc-user mailing list Sdcc-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sdcc-user
