I have a n00b question. I am using sdcc to write c for a 18f248. I'd like to use interrupts. Using gpsim execution starts at 0x0000 and will happily skip over the NOPs until my main at address 0x2A. When I switch on an interrupt the interrupt vector address is interpreted as program code and of course the results are undefined.
I think the questions I have are 1. How do I specify the reset vector target address and make it point to main 2. How do I make sure program execution at reset is from main and not a bunch of nop instructions from address 0x0000 -> 0x002A. If I am asking the wrong question or need to approach this in a different way then I would really appreciate either some light or a gentle nudge in the right direction. Many thanks Jonathan P.S. Please reply to [EMAIL PROTECTED] because I am not sure how I look at posts to [EMAIL PROTECTED] Thanks again. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Sdcc-user mailing list Sdcc-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sdcc-user
