I have a problem with a Cyberflex Open 16K for Linux: The card reader and the software were successfully installed on a Linux PC. Then, using the xcard tool, I was able to successfully create the Wallet sample applet on the card. But now, when I try to validate, install, and use the applet, whatever command (APDU) I send fails, and I get the status information 0x6400. I cannot find the code 6400 in the Programmer's Guide and have no idea what the meaning is. I get the same code when I try to verify the transport key or do anything else. The reader seems to be ok; and I rebooted the system, which did not help. Has anyone had a similar problem or knows what 0x6400 means? Thanks for the help, Bernhard Beckert -- +----------------------------------------+------------------------------+ | Bernhard Beckert | Phone: ++49-721-608-4324 | | Institute for Logic, Complexity and | Fax: ++49-721-608-4211 | | Deduction Systems | E-mail: [EMAIL PROTECTED] | | University of Karlsruhe | | | 76128 Karlsruhe, Germany | | +----------------------------------------+------------------------------+ | WWW: http://i12www.ira.uka.de/~beckert/ | +-----------------------------------------------------------------------+ *************************************************************** Linux Smart Card Developers - M.U.S.C.L.E. (Movement for the Use of Smart Cards in a Linux Environment) http://www.linuxnet.com/smartcard/index.html ***************************************************************
