On 03/08/2018 03:09 AM, Olaf Meeuwissen wrote:
Hi Todd,
ToddAndMargo writes:
Hi All,
Fedora 27
iscan-gt-f720-bundle-1.0.1.x64.rpm
By change is the Epson Perfection V300 included in
the rpm's front end, but not its back end?
I just remembered I wrote a section about the network configuration for
iscan a decade or so ago. Have a look at
http://download.ebz.epson.net/man/linux/iscan_e.html#sec7
and see if some of that helps.
I will look on Friday when I get some more office time.
Thank you!
Scanimage can find it,
$ scanimage -L
device `epkowa:interpreter:001:008' is a Epson Perfection V300 flatbed
scanner
but saned cannot.
saned[16940]: [net] sane_init: done
saned[16940]: [dll] init: backend `net' is version 1.0.27
saned[16940]: [net] sane_get_devices: local_only = 1
saned[16940]: [dll] sane_get_devices: found 0 devices
saned[16940]: saned exiting
If not, how do I get the V300 into the back end?
Does saned's dll load the epkowa backend? I think you can check by
running it in standalone mode and get the dll backend to output the
debug info with
sudo SANE_DEBUG_DLL=128 saned -d128
You are of course looking at the saned output from a saned that runs on
the machine to which your V300 is connected, right?
Looking at
# journalctl -efx -t saned > /home/temp/saned.log.epson4.txt
After running `xsane net:localhost`, it seems like I
have hundreds of "epkowa" entries, but nothing with a
"300" in it.
This is why I am suspicious of the V300 not being
supported in the back end.
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-requ...@lists.alioth.debian.org
