Hi Wojciech, Please provide a logfile created with:
$ SANE_DEBUG_PIXMA=4 scanimage 2> pixma.log > pixma.pnm Please zip, tar.gz or 7zip pixma.log and send it to me. Cheers, Rolf Am 22.01.2018 um 03:29 schrieb Wojciech Teichert: > scanimage -L > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > root@### sane-find-scanner > > # sane-find-scanner will now attempt to detect your scanner. If the > # result is different from what you expected, first make sure your > # scanner is powered up and properly connected to your computer. > > # No SCSI scanners found. If you expected something different, make > sure that > # you have loaded a kernel SCSI driver for your SCSI adapter. > > found USB scanner (vendor=0x04a9 [Canon], product=0x27e1 > [MF633C/635C]) at libusb:001:005 > # Your USB scanner was (probably) detected. It may or may not be > supported by > # SANE. Try scanimage -L and read the backend's manpage. > > # Not checking for parallel port scanners. > > # Most Scanners connected to the parallel port or other proprietary > ports > # can't be detected by this program. > root@### scanimage -L > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages) > > This is new version from git://git.debian.org/sane/sane-backends.git > <http://git.debian.org/sane/sane-backends.git> using ./configure > --prefix=/usr --libdir=/usr/lib/x86_64-linux-gnu --sysconfdir=/etc > --localstatedir=/var --enable-avahi && make -j4 > > 2018-01-03 21:09 GMT+01:00 Rolf Bensch <r...@bensch-online.de > <mailto:r...@bensch-online.de>>: > > Hi Wojtek, > > I just added your scanner to SANE. Please check out the recent version > from git or you can use the daily git snapshot tomorrow. > > Please report if all scanning features (75-600dpi, simple and duplex > document feeder) are running with USB. After this you can try the bjnp > interface. > > Hope this helps. > > Cheers, > Rolf > > > Am 13.12.2017 um 09:58 schrieb Wojtek Teichert: > > Can you add support for Canon i-SENSYS MF633cdw scanner? > >
-- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
