* Reinhard Kotucha <reinhard.kotu...@web.de> [Dec 22. 2017 02:58]:
> Hi,
> first of all, thank you very much for sane.
>
> I've bought a slide scanner (Reflecta DigiDia 5000) from a friend
> which is classified as "Untested". However, its successor (DigiDia
> 6000) is supported and I doubt that there are significant differences.
Moin Reinhard,
welcome to the wonderful world of Reflecta/PIE interfaces. ;-)
Please run
export SANE_DEBUG_PIEUSB=11
in a shell and then start xsane from there.
This should report the model number. Add it to pieusb.conf and you
should be all set.
>
> I created a file
>
> /etc/udev/rules.d/40-libsane.rules
>
> containing the line
>
> ATTRS{idVendor}=="05e3", ATTRS{idProduct}=="0142", ENV{libsane_matched}="yes"
Please add 'GROUP="lp",' to this list to give you full access to the
usb device.
>
> The file
>
> /etc/sane.d/pieusb.conf
>
> contains the line
>
> usb 0x05e3 0x0142
>
> and everything else is commented out.
That's the old format and insufficient for your device.
>
> This looks better because libsane-pieusb.so.1 is read but scanimage -L
> still fails. Is it on purpose that pieusb is not in dll.conf by default?
Your version of 'sane' is too old.
>
> Though I don't believe that anything regarding Reflecta scanners was
> changed recently, I temporarily installed the current git version of
> sane-backends.
Awesome, you're all set. The 'model number' is the only missing part.
> It didn't solve my problem either but introduced a new room of freedom.
> Entries in pieusb.conf now have the form
>
> usb <vendor-id> <device-id> <model-nr> <has-slide-transport>
>
> and I do not know how to determine the <model-nr> of my scanner.
> Therefore I switched back to the version provided by Debian but can
> activate the current git version at any time if desired.
>
> I'm absolutely clueless now. What am I doing wrong?
Nothing. You just happen to be the first to use this scanner.
Klaus
--
SUSE Linux GmbH, GF: Felix Imendörffer, Jane Smithard, Graham Norton, HRB 21284
(AG Nürnberg)
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-requ...@lists.alioth.debian.org
