Hi ToddAndMargo, ToddAndMargo writes:
>>> Em sex, 24 de nov de 2017 09:47, ToddAndMargo <toddandma...@zoho.com >>> <mailto:toddandma...@zoho.com>> escreveu: >>> >>> On 11/24/2017 03:44 AM, ToddAndMargo wrote: >>> > Hi All, >>> > >>> > What to I do to saned.conf to tell it I want EVERYONE to >>> > be able to access it? >>> >>> Both network users and all users in general >>> > > On 11/24/2017 05:26 PM, Luiz Angelo Daros de Luca wrote: >> Add a single + in a line. > > I do not understand. > > I should have said I was speaking of > /etc/sane.d/saned.conf Straight from the saned manual page in the CONFIGURATION section CONFIGURATION First and foremost: saned is not intended to be exposed to the internet or other non-trusted networks. Make sure that access is limited by tcpwrappers and/or a fire‐ wall setup. Don't depend only on saned's own authentication. Don't run saned as root if it's not necessary. And do not install saned as setuid root. The saned.conf configuration file contains both options for the daemon and the access list. data_portrange = min_port - max_port Specify the port range to use for the data connection. Pick a port range between 1024 and 65535; don't pick a too large port range, as it may have performance issues. Use this option if your saned server is sitting behind a firewall. If that firewall is a Linux machine, we strongly recommend using the Netfilter nf_conntrack_sane module instead. The access list is a list of host names, IP addresses or IP subnets (CIDR notation) that are permitted to use local SANE devices. IPv6 addresses must be enclosed in brackets, and should always be specified in their compressed form. Connections from localhost are always permitted. Empty lines and lines starting with a hash mark (#) are ignored. A line containing the single character ``+'' is interpreted to match any hostname. This allows any remote machine to use your scanner and may present a security risk, so this shouldn't be used unless you know what you're doing. > I am look at how to add all users and all networks. I want > everyone to be able to access the scanner. Reading or searching the documentation might help ;-) Hope this helps, -- Sent with my mu4e -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
