Hi all. It's been 12 years since I last posted to a debian mailman list (deb-edu), and now it's in hope of getting somewhere useful with this Mustek A3 scanner I've got on my table.
To be honest; I'm properly confused. By searching the net for information on this scanner, I get the impression that either all work has stalled or I'm missing out on some important bits of information. About the scanner On the back if it, it reads "Mustek PageExpress A3 USB 1200 PRO". 'lsusb' says "Bus 002 Device 006: ID 055f:040b Mustek Systems, Inc. ScanExpress A3 USB 1200 PRO". 'sudo lsusb -v -d 055f:040b' starts off "Bus 002 Device 006: ID 055f:040b Mustek Systems, Inc. ScanExpress A3 USB 1200 PRO Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x055f Mustek Systems, Inc. idProduct 0x040b ScanExpress A3 USB 1200 PRO bcdDevice 1.00 iManufacturer 1 Hewlett-Packard. iProduct 2 USB2.0 Scanner iSerial 0 bNumConfigurations 1 [...]" 'sudo usb-devices' gives "[...] T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=055f ProdID=040b Rev=01.00 S: Manufacturer=Hewlett-Packard. S: Product=USB2.0 Scanner C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) [...]" 'sudo sane-find-scanner' doesn't find it Nor does 'sudo scanimage -L' (obviously). http://www.sane-project.org/cgi-bin/driver.pl?manu=mustek&model=&bus=any lists it as a "BearPaw 6400 TA Pro" ..? Various forums around claims this scanner to work with the mustek_usb2 back- end, but all I can find in SANE-site says mustek_usb2 only supports a single scanner (for now). Although I've used SANE since the dark ages (-98), I'm no SANE-guru by any length. I'm a rusty developer, been out of the game for years due to health- issues, and haven't coded C other than hacking the odd SCSI-driver and scripting servers for remote management. So I might just be able to pitch in if wanted/needed, but will need help in getting into the SANE-architecture and libs coding C. (I have mostly worked with Java, C# and some web-development. Hacking some drivers and tracing crashes more than 15 years ago doesn't really help that much.) So I really want to get this thing working, I am willing and possibly even able to pitch in, but needs someone to ask seriously stupid questions to get going. Not so stupid questions (for now): Q1: What's the status on this scanner/these scanners back-end? Q2: Are there someone working on it now? Q3: Are there available some architectural documents for SANE? Hope you've got some time for all this :) Gjermund (Norway) -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
