# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
# scsi EPSON
# for the GT-6500:
# scsi "EPSON SC"
#
# Parallel port scanner:
# pio 0x278
# pio 0x378
# pio 0x3BC
#
# USB scanner:
# There are two different methods of configuring a USB scanner: libusb and the kernel module
# For any system with libusb support (which is pretty much any recent Linux distribution) the
# following line is sufficient. This however assumes that the connected scanner (or to be more
# accurate, it's device ID) is known to the backend. 
usb

# For libusb support for unknown scanners use the following command
# usb <product ID> <device ID>
# e.g.:
# usb 0x4b8 0x0110
usb 0x04b8 0x0114

# And for the scanner module, use the following configuration:
# usb /dev/usbscanner0
# usb /dev/usb/scanner0
usb 0x04b8 0x0114
