Hello, I bought an hp scanjet 8200 from amazon and I can't get it to work. Here is a list of commands run and output lightly edited for brevity. Feel free to snip non relevant details. Thanks, in advance.
% scanimage --version scanimage (sane-backends) 1.0.24; backend version 1.0.24 % equery l PACKAGE media-gfx/sane-backends-1.0.24-r6 media-gfx/sane-frontends-1.0.14 media-gfx/xsane-0.999-r1 media-gfx/simple-scan-3.18.2 % uname -a Linux ulgy_thing 4.1.15-gentoo-r1-nopreempt-dav2 #1 SMP x86_64 Intel(R) Pentium(R) CPU 2117U @ 1.80GHz GenuineIntel GNU/Linux % scanimage -v -d avision:libusb:004:029 > aa.pnm scanimage: open of device avision:libusb:004:029 failed: Operation not supported # In system log [scanimage] protocol/discovery/mdns.c 122: unable to add to multicast group: No such device_ % sane-find-scanner found USB scanner (vendor=0x03f0 [hp], product=0x0b01 [hp scanjet 8200]) at libusb:004:029 DEBUG INFO avision == 128 sanei_usb == 128 dll Looked at, but not needed as there was no problem here AFAIK. ################# DEBUG ~50 lines ################################################### [avision] try to write src, count: 2. [sanei_usb] sanei_usb_write_bulk: trying to write 2 bytes [sanei_usb] 000 00 00 .. [sanei_usb] sanei_usb_write_bulk: wanted 2 bytes, wrote 2 bytes [avision] wrote 2 bytes [avision] avision_usb_status: timeout 10000, 1 retries [avision] ==> (bulk read) going down ... [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes [sanei_usb] 000 00 . [sanei_usb] sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk read) got: 1, status: 0 [avision] adf_reset: write 2 complete. [avision] Timeouts: write: 30000, read: 30000, status: 10000 [avision] try to write cmd, count: 10. [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes [sanei_usb] 000 28 00 69 00 0A 0D 00 00 04 00 (.i....... [sanei_usb] sanei_usb_write_bulk: wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes [avision] try to read 4 bytes [sanei_usb] sanei_usb_read_bulk: trying to read 4 bytes [sanei_usb] 000 00 00 02 40 ...@ [sanei_usb] sanei_usb_read_bulk: wanted 4 bytes, got 4 bytes [avision] read 4 bytes [avision] avision_usb_status: timeout 10000, 1 retries [avision] ==> (bulk read) going down ... [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes [sanei_usb] 000 00 . [sanei_usb] sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk read) got: 1, status: 0 [avision] adf_reset: raw data: [avision] [0] 00000000b 0o 0d 0x [avision] [1] 00000000b 0o 0d 0x [avision] [2] 00000010b 2o 2d 2x [avision] [3] 01000000b 100o 64d 40x [avision] get_accessories_info: Waiting while ADF firmware resets... [avision] wait_ready: sending TEST_UNIT_READY [avision] filling command to have a length of 10, was: 6 [avision] Timeouts: write: 30000, read: 15000, status: 15000 [avision] try to write cmd, count: 10. [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes [sanei_usb] 000 00 00 00 00 00 00 00 00 00 00 .......... [sanei_usb] sanei_usb_write_bulk: wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes [avision] avision_usb_status: timeout 15000, 1 retries [avision] ==> (bulk read) going down ... [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes [sanei_usb] 000 00 . [sanei_usb] sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk read) got: 1, status: 0 [avision] get_accessories_info: Maximum retries attempted, ADF unresponsive. [avision] sane_open: additional probe failed: Operation not supported scanimage: open of device avision:libusb:004:029 failed: Operation not supported [avision] sane_exit: ############### DEBUG 27 lines scanimage -h -d avision:libusb:004:029 ############### [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes [sanei_usb] 000 00 . [sanei_usb] sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk read) got: 1, status: 0 [avision] adf_reset: raw data: [avision] [0] 00000000b 0o 0d 0x [avision] [1] 00000000b 0o 0d 0x [avision] [2] 00000010b 2o 2d 2x [avision] [3] 01000000b 100o 64d 40x [avision] get_accessories_info: Waiting while ADF firmware resets... [avision] wait_ready: sending TEST_UNIT_READY [avision] filling command to have a length of 10, was: 6 [avision] Timeouts: write: 30000, read: 15000, status: 15000 [avision] try to write cmd, count: 10. [sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes [sanei_usb] 000 00 00 00 00 00 00 00 00 00 00 .......... [sanei_usb] sanei_usb_write_bulk: wanted 10 bytes, wrote 10 bytes [avision] wrote 10 bytes [avision] avision_usb_status: timeout 15000, 1 retries [avision] ==> (bulk read) going down ... [sanei_usb] sanei_usb_read_bulk: trying to read 1 bytes [sanei_usb] 000 00 . [sanei_usb] sanei_usb_read_bulk: wanted 1 bytes, got 1 bytes [avision] <== (bulk read) got: 1, status: 0 [avision] get_accessories_info: Maximum retries attempted, ADF unresponsive. [avision] sane_open: additional probe failed: Operation not supported scanimage: open of device avision:libusb:004:029 failed: Operation not supported -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
