Hi Jonathan, I just committed the patch Sane's development sources.
Maybe you want to test ethernet or wifi connection (bjnp). Please read the manpage for details (man sane-pixma). Don't hesitate to ask the mailing list for help, if you may need some. Sorry, but I cannot help with bjnp. Many thanks for your help. Cheers, Rolf Am 27.07.2015 um 14:32 schrieb Jonathan Anderson: > Hi, > > that patch made all the stripes go away and 1200 and 2400 dpi scans now > look great. > Scanning is very slow but I suppose that comes down to the scan process > and the usb2 connection and not the software. > > Thank you for helping open source forward :-) > > Just a short question, as you seem alert and working on this project, > how come there has been no official release since 2013? > > Cheers > jonathan > > ------------------------------------------------------------------------ > *From:* Rolf Bensch <r...@bensch-online.de> > *To:* Jonathan Anderson <emailjonathananderson-...@yahoo.com> > *Cc:* Sane Development <sane-devel@lists.alioth.debian.org> > *Sent:* Saturday, July 25, 2015 12:12 PM > *Subject:* Re: [sane-devel] pixma mg7500 testing > > Hi Jonathan, > > Attached patch should fix the 1200 and 2400 dpi issue. This file patches > backend/pixma_mp150.c. > > Please copy attached file into the folder backend/ and process from > inside backend/ this command: patch pixma_mp150.c pixma_mp150.c.patch1 > > Then 'cd ..' and 'make && sudo make install'. > > Please report your results again. > > If this patch is working, I'll update Sane's development sources. > > Cheers, > Rolf > > > > Am 24.07.2015 um 16:58 schrieb Jonathan Anderson: >> Hi, >> >> I've tested the sane-backends-git20150724 with Fedora 22. >> The scanner was correctly detected and scanned 600 dpi good as you said. >> It showed stripes on 1200 and 2400 just as you said. >> >> Do you need to see the scans or can I give you any additional info to >> help you? >> >> Kind regards >> Jonathan >> >> ------------------------------------------------------------------------ >> *From:* Rolf Bensch <r...@bensch-online.de <mailto:r...@bensch-online.de>> >> *To:* Jonathan Anderson <emailjonathananderson-...@yahoo.com > <mailto:emailjonathananderson-...@yahoo.com>> >> *Cc:* "sane-devel@lists.alioth.debian.org > <mailto:sane-devel@lists.alioth.debian.org>" >> <sane-devel@lists.alioth.debian.org > <mailto:sane-devel@lists.alioth.debian.org>> >> *Sent:* Friday, July 24, 2015 9:08 AM >> *Subject:* Re: [sane-devel] pixma mg7500 testing >> >> Hi Jonathan, >> >> Please install SANE Development (git) Version as described in >> README.linux (I assume you're using Linux): >> http://www.sane-project.org/docs.html > <http://www.sane-project.org/docs.html>. >> >> Then your scanner should scan up to 600dpi without any problems. >> >> I assume that you'll see stripes on 1200 and 2400 dpi images, then I'll >> create a patch for your scanner. Please report your results. >> >> Many thanks for your help. >> >> Cheers, >> Rolf >> >> Am 22.07.2015 um 16:48 schrieb Jonathan Anderson: >> >> >>> I'd be happy to help with the testing of a Canon Pixma MG7550. >>> Please tell me what to do. >>> >>> Kind regards >>> Jonathan >> >> >> > > -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org