Forgive me if this not the correct section for this. I wanted to start a bash script to process the completed scans. I created a link to Scan.sh from test.script
test.script -> scan.sh A section of scan.sh contains the following when scanning via the ADF if [ $SCANBD_ACTION -eq "paperload" ] && [ $SCANBD_FUNCTION -eq 2 ]; then logger -t "scanbd: $0" "************* Now Scanning on device $SCANBD_DEVICE ***************" scanimage -d $SCANBD_DEVICE -y 279.4 -x 215.9 --batch --format=tiff --mode Lineart --resolution 300 --source="ADF Duplex" logger -t "scanbd: $0" "************* Scanning ended on device $SCANBD_DEVICE ***************" fi logger -t "scanbd: $0" "End of $SCANBD_ACTION for device $SCANBD_DEVICE" Removing blank pages and cleaning all others. logger -t "scanbd: $0" "**** Starting Page Removal Process **" *. ./premove.sh* <--------- Post processing script After the scanner completes the scan the script is terminated and does not allow processing to continue. Feb 10 00:38:14 PiScanner scanbd: /usr/local/etc/scanbd/scan.sh: **** Scanning ended on device fujitsu:fi-4220C2dj:100742 ** Feb 10 00:38:14 PiScanner scanbd: /usr/local/etc/scanbd/scan.sh: End of scan for device fujitsu:fi-4220C2dj:100742 Feb 10 00:38:14 PiScanner scanbd: /usr/local/sbin/scanbd: child /usr/local/etc/scanbd/scan.sh exited with status: 1 Feb 10 00:38:15 PiScanner scanbd: /usr/local/sbin/scanbd: append string fujitsu:fi-4220C2dj:100742 to signal scan_end Feb 10 00:38:15 PiScanner scanbd: /usr/local/sbin/scanbd: now sending signal scan_end Is there a method allowing the second script to continue and process the pages scanned? -- View this message in context: http://sane.10972.n7.nabble.com/scanbd-Post-Processing-tp19426.html Sent from the SANE - Dev mailing list archive at Nabble.com. -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
