Hello Rolf, Thanks for your help.
I've got it running successfully, now. * install linusb-dev (common mistake) * build from source * adduser <MYUSER> scanner * relogin Scanner works as expected. Maybe someone wants to update the Status at: http://sane-project.org/sane-mfgs.html#Z-CANON PIXMA MG2400 Series Untested --> Complete Thanks for your help. Greetings from the sunny Haifa Marcus Am 14.09.2014 um 21:27 schrieb Rolf Bensch: > Hi Marcus, > > Did you follow the installation description in README.linux, which comes > with the source code? > > Please test the used Sane version with 'scanimage -V'. You should see: > scanimage (sane-backends) 1.0.25git; backend version 1.0.25 > > Please install resent Sane from git (1.0.25). I'd like to patch only the > recent version, if needed. > > Cheers, > Rolf > > > > Am 13.09.2014 um 12:08 schrieb Marcus Wellnitz: >> Hello, >> >> at the website there was a hint "testers needed" for that device. >> I try to get it running on a Ubuntu 14.04 environment. >> >> First shot with on board sane version 1.0.14-9 failed. >> >> after downloading an installing 1.0.24 (stable) as well as >> sane-backends-git20140913 I had no success. >> >> ================================ >> what I did: >> FILE=https://alioth.debian.org/frs/download.php/file/3958/sane-backends-1.0.24.tar.gz >> FILE=http://www.sane-project.org/snapshots/sane-backends-git20140913.tar.gz >> wget $FILE >> tar xzvf <$FILE> >> cd [sane-backends-1.0.24|sane-backends-git20140913] >> ./configure >> make >> sudo make install >> >> sudo sane-find-scanner >> ================================ >> >> With the Ubuntu (old) sane version there were listed 2 devices: >> 1. HP-Scanner (works) >> 2. Lenovo? fingerprint reader >> >> With the fresh compiled source versions no scanners have been detected. >> sane-find-scanner pixma:04a9176c_123456 >> >> syslog after plugging my scanner to the computer: >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.508096] usb 1-1: >> new high-speed USB device number 4 using ehci-pci >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645013] usb 1-1: >> New USB device found, idVendor=04a9, idProduct=176c >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645024] usb 1-1: >> New USB device strings: Mfr=1, Product=2, SerialNumber=3 >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645030] usb 1-1: >> Product: MG2400 series >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645036] usb 1-1: >> Manufacturer: Canon >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.645041] usb 1-1: >> SerialNumber: 123456 >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 mtp-probe: checking bus 1, >> device 4: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1" >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 mtp-probe: bus: 1, device: 4 was >> not an MTP device >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.683171] calling >> usblp_driver_init+0x0/0x1000 [usblp] @ 20828 >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.686903] usblp >> 1-1:1.1: usblp2: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid >> 0x04A9 pid 0x176C >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.687808] usbcore: >> registered new interface driver usblp >> Sep 13 10:55:01 mwellnitz-ThinkPad-T500 kernel: [54821.687817] initcall >> usblp_driver_init+0x0/0x1000 [usblp] returned 0 after 4528 usecs >> >> (the serial number ist modified for security reasons) >> >> Do I have to install new sane-frontend software as well? >> What can I do to provide you with useful informations to get it working >> or at least to know that it would never work wit that version or setup? >> >> thanks >> >> Marcus >> >> > > -- Marcus Wellnitz -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
