Am Dienstag, 8. Juli 2014, 22:07:42 schrieb Toni LDG: > Hi all. Hi!
> I just received a Canoscan LiDE 210 and just try to get it working > properly. > > Just noticed that when using it in Linux, the results of any kind of > scan shows a couple of small green bands on the left side, vertical > and about 1 cm width. > > The strange thing is that those bands are Not shown when scanning from > Micrososft Windows with the Canon suplied driver. > There image there is perfect. It seems to only affect Sane. > > I've tried both on Debian unstable and on Ubuntu 14.04 but same > results. > > Also tried re-calibrating the scanner from Windows several times, but > same issue. > Removing the calibration file and again. > > Also from different front-ends (xsane and skanlite) same results. > > The fact that only affects Linux makes me wonder if is some kind of > software issue or is a faulty hardware. > I am in time to return it but just wanna know first if i am doing > something wrong, or is a software issue. I can see the slight colour error on the left margin of your Linux scan, though I had to look very carefully. I did a check with my own LiDE 210 and could not find any colour distortions - so it might be a hardware error, though it amazes me that the Windows scan software removes the colour errors. Perhaps it depends on the sane version? My version is ,----[ ] | [12:28] tm@dungeonmaster:~ $ scanimage -V | scanimage (sane-backends) 1.0.24; backend version 1.0.24 `---- Greetings Thorsten -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
