Hello, I have problems with DR-G1130, XSANE not recognized and run this command and I just scanned a sheet.
root@ubuntu:/home/administrador/Documents/Pruebas-DR-G1130# scanimage --batch --format=tiff -l 0 -t 0 -x 210.0 -y 297.0 --resolution "150" --mode "Gray"scanimage: rounded value of br-x from 210 to 210.01 scanimage: rounded value of br-y from 297 to 279.364 Scanning -1 pages, incrementing by 1, numbering from 1 Scanning page 1 Scanned page 1. (scanner status = 5) Scanning page 2 scanimage: sane_start: Document feeder out of documents Can you help me ?? Thanks 2014-07-07 20:25 GMT-05:00 m. allan noah <kitno...@gmail.com>: > Nevermind. I have downloaded drivers from canon's site, and extracted the > information I needed. I have attached a patch. Instructions: > > 1. download latest sane-backends snapshot from > http://www.sane-project.org/snapshots/ > 2. tar xzf sane-backends-git20140708.tar.gz > 3. cd sane-backends-git20140708 > 4. cat cdr-47a.diff | patch -p1 > 5. ./configure [your various configure options here] > 6. make > 7. remove the existing canon_dr.conf file, probably in /etc/sane.d > 8. sudo make install > > Then, as the root user, you should be able to see the DR-G1130 when you > run scanimage -L, and you should also be able to scan. > > To get the non-root user to scan, we will have to modify the device > permissions, using udev or hal. I am unsure what ancient Ubuntu used. > > allan > > > > On Mon, Jul 7, 2014 at 8:01 PM, m. allan noah <kitno...@gmail.com> wrote: > >> Is the scanner plugged in an turned on? You might have to try it as root >> user. >> >> allan >> >> >> On Mon, Jul 7, 2014 at 7:56 PM, Valeria Genesis Vargas Ruiz < >> vvar...@microformas.com.mx> wrote: >> >>> Hello, >>> >>> Here are the result >>> >>> Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub >>> Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse >>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>> >>> >>> Thanks >>> >>> >>> 2014-07-07 18:18 GMT-05:00 m. allan noah <kitno...@gmail.com>: >>> >>> I assume this scanner is similar to the G1100, so tell me what the USB >>>> ID's are (the command lsusb will show you), and I will send you a patch >>>> which attempts to enable this scanner. >>>> >>>> allan >>>> >>>> >>>> On Mon, Jul 7, 2014 at 4:13 PM, Valeria Genesis Vargas Ruiz < >>>> vvar...@microformas.com.mx> wrote: >>>> >>>>> Hello >>>>> >>>>> Who could support me with this machine to work in Ubuntu 10.04 ?? >>>>> >>>>> Thanks >>>>> >>>>> -- >>>>> >>>>> >>>>> -- >>>>> sane-devel mailing list: sane-devel@lists.alioth.debian.org >>>>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel >>>>> Unsubscribe: Send mail with subject "unsubscribe your_password" >>>>> to sane-devel-requ...@lists.alioth.debian.org >>>>> >>>> >>>> >>>> >>>> -- >>>> "The truth is an offense, but not a sin" >>>> >>> >>> >>> >>> -- >>> >>> >> >> >> -- >> "The truth is an offense, but not a sin" >> > > > > -- > "The truth is an offense, but not a sin" > --
-- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
