Dear list,
I try to get a new Fujitsu ScanSnap iX500 to work on Debian 7.4 x64. The
scanner works on this machine with some proprietary software which
doesn't use SANE.
I installed SANE from source, both into the regular folders and with
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var
I still have the original out-dated SANE installed, as the new manually
installed SANE doesn't resolve the xsane dependencies here.
For testing I set
> sudo chmod -R a+w /dev/bus/usb/*
Normally an UDEV rule and the user being in 'plugdev' 'scanner' 'saned'
groups is supposed to set all permissions right.
I removed all other scanner/USB-IDs from the SANE config(s) and set the
buffer to 65536. With original configs the symptoms were the same.
########################
> sudo ldconfig -v | grep libsane
ldconfig: Can't stat /lib/i486-linux-gnu: No such file or directory
ldconfig: Can't stat /usr/lib/i486-linux-gnu: No such file or directory
ldconfig: Path `/lib/x86_64-linux-gnu' given more than once
ldconfig: Path `/usr/lib/x86_64-linux-gnu' given more than once
libsane.so.1 -> libsane.so.1.0.25
libsane.so.1 -> libsane.so.1.0.22
libsane.so.1 -> libsane.so.1.0.25
########################
> sane-config --version
1.0.25
########################
> sane-find-scanner
found USB scanner (vendor=0x04c5 [Fujitsu], product=0x132b [ScanSnap
iX500]) at libusb:001:013
########################
The first time I try to talk to the scanner, it seems to respond. From
the second time on, it seems dead. Only re-plugging the USB lets me talk
to it again, for one time.
I never got the scanner to physically do anything, like pulling paper or
changing the status LEDs.
########################
First time after plugging USB in:
> scanimage -L
[sanei_debug] Setting debug level of fujitsu to 5.
[fujitsu] sane_init: fujitsu backend 1.0.119, from sane-backends 1.0.25git
device `fujitsu:ScanSnap iX500:40368' is a FUJITSU ScanSnap iX500 scanner
########################
>From second time on:
> scanimage -L
[sanei_debug] Setting debug level of fujitsu to 5.
[fujitsu] sane_init: fujitsu backend 1.0.119, from sane-backends 1.0.25git
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick again
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] wait_scanner: error 'Error during device I/O'
[fujitsu] connect_fd: could not wait_scanner
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
########################
Every time:
> scanimage > test
[sanei_debug] Setting debug level of fujitsu to 5.
[fujitsu] sane_init: fujitsu backend 1.0.119, from sane-backends 1.0.25git
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] WARNING: Brain-dead scanner. Hitting with stick again
[fujitsu] stat: return error 'Error during device I/O'
[fujitsu] wait_scanner: error 'Error during device I/O'
[fujitsu] connect_fd: could not wait_scanner
scanimage: open of device fujitsu:ScanSnap iX500:40368 failed: Error
during device I/O
########################
[sanei_debug] Setting debug level of fujitsu to 25.
First time after plugging USB in:
> scanimage -L
http://paste.debian.net/89425/
>From second time on:
> scanimage -L
http://paste.debian.net/89426/
########################
At this point I am lost here.
I would consider setting up a dedicated linux box for this, on another
distro if needed. The preferred solution would be to get it running on
my desktop computer, though ;-)
I am grateful for any hints.
Please let me know if my way of formatting (and exporting to a pastebin)
needs to be improved for mailinglists too.
Cheers from Germany,
Manuel
