Hi Matthias, Sorry I cannot find any button related data in the log file. Therefore your scanner has no button support.
Unless you may find button support on a Windows machine or with binary. Then please sniff the usb communication (e.g. with wireshark) and send the log file to me. Cheers, Rolf Am 21.03.2014 00:03, schrieb Matthias Peter Walther: > Hello, > > I tested every button. As far as I understand, the device has 4 > Operation modes. The choice of the operating mode may influence the > button behavior. I set it to "scanner", after I tried out the four > buttons for the four different operation modes. > > The results as attachment. > > Gr??e > MPW > > Am 20.03.2014 16:52, schrieb Rolf Bensch: >> Hi Matthias, >> >> Please test all buttons and look if the debug output will change. The >> code says that some scanners ask to set the time when byte 3 is set. >> >> Cheers, >> Rolf >> >> >> Am 19.03.2014 00:31, schrieb Matthias Peter Walther: >>> Hello, >>> >>> I think it works. That would be so cool. >>> >>> Thank you so much for your work on this and with the adf, too! >>> >>> I'll try out scanbd later. Do I have to do further code changes or is >>> scanbd supposed to work just like that with that single additional line? >>> >>> Is it capable of detecting different buttons? So that it would be >>> possible to sort the scans into different directories by different >>> buttons? That would be so awesome. I pressed the button '9' on the >>> dialpad. I think the menu buttons doesn't work, but the numbers do. >>> >>> Bye >>> Matthias >>> >>> Am 18.03.2014 23:13, schrieb Rolf Bensch: >>>> Hi, >>>> >>>> If you like, please test button support for your scanner. >>>> >>>> If button support is working, you can use scanbd to control scanning via >>>> your scanner's buttons. You can find more infos about this in the >>>> mailing lists archive, e.g. here: >>>> http://sane.10972.n7.nabble.com/template/NamlServlet.jtp?macro=search_page&node=3&query=scanbd&days=0&sort=date >>>> >>>> To enable button support, add one single line with your scanner-pid in >>>> file pixma_mp150.c in function handle_interrupt() between lines 927 and >>>> 928, e.g. >>>> || s->cfg->pid == MX370_PID >>>> >>>> Test procedure: >>>> (1) 'export SANE_DEBUG_PIXMA=11' >>>> (2) press any button >>>> (3) check output from 'scanimage -A' >>>> >>>> You should see something like this: >>>> >>>> Buttons: >>>> --button-update >>>> Update button state >>>> [pixma] INTR T=1.670 len=32 >>>> [pixma] 00000000:00 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >>>> [pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >>>> [pixma] >>>> --button-1 <int> [1] [read-only] >>>> Button 1 >>>> --button-2 <int> [0] [read-only] >>>> Button 2 >>>> --original <int> [0] [read-only] >>>> Type of original to scan >>>> --target <int> [4] [read-only] >>>> Target operation type >>>> --scan-resolution <int> [0] [read-only] >>>> Scan resolution >>>> >>>> Please report your results. >>>> >>>> Cheers, >>>> Rolf >
